HYDRAULIC SYSTEM
LINES GP-REARBASIC ENGINE
DRIVE GP-AUXILIARYHYDRAULIC SYSTEM
COUPLING GPOPERATOR STATION
ROPS/FOPS GPWINDOW GP
ROPS/FOPS GP
WINDOW GP
HYDRAULIC SYSTEM
LINES GP-REAR
#SEBP13240350
3T-1635: LINES GP-REAR ATTACHMENT
3T1635 REAR ATTACHMENT LINES GROUP-3 CIRCUITS-PART 2 OF 3
PART OF 3T251 AND 3T317 HYDRAULIC CONTROL ARRANGEMENTS LISTED ON PAGES
169 & 170. AN ATTACHMENT
PART OF 3T251 AND 3T317 HYDRAULIC CONTROL ARRANGEMENTS LISTED ON PAGES
169 & 170. AN ATTACHMENT
For full view, you need register
Parts for your D7G TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-1662 | [1] | HOSE ASSEM. | |
| (Includes) | ||||
| 9S-0247 CH | HOSE 56 in.(143 cm) | |||
| 9S-9726 C | [1] | COUPLING ASSEM. (45 degrees) | ||
| 2. | 3S-7166 | [2] | SLEEVE | |
| 3. | 1P-1711 | [1] | COUPLING ASSEM. (90 degrees) | |
| 4. | 3T-1665 | [1] | HOSE ASSEM. | |
| (Includes) | ||||
| 9S-0247 CH | HOSE 47.6 in.(121 cm) | |||
| 8S-6389 | [1] | COUPLING ASSEM. (90 degrees) | ||
| 5. | 3S-7166 | [2] | SLEEVE | |
| 6. | 9S-9726 C | [1] | COUPLING ASSEM. (45 degrees) | |
| 7. | 4S-6680 | [2] | CONNECTOR | |
| 7M-8485 | [2] | SEAL | ||
| 8. | 3T-1677 | [1] | HOSE ASSEM. | |
| (Includes) | ||||
| 9S-0247 CH | HOSE 27.5 in.(70 cm) | |||
| 1P-1711 | [1] | COUPLING ASSEM. (90 degrees) | ||
| 9. | 3S-7166 | [2] | SLEEVE | |
| 10. | 9S-9726 | [1] | COUPLING ASSEM. (45 degrees) | |
| 11. | 0S-1588 C | [2] | BOLT | |
| 12. | 5M-2894 C | [6] | WASHER | |
| 13. | 3T-1678 | [1] | HOSE ASSEM. | |
| (Includes) | ||||
| 9S-0247 H | HOSE 22 in.(57 cm) | |||
| 8S-6389 | [1] | COUPLING ASSEM. (90 degrees) | ||
| 14. | 3S-7166 | [2] | SLEEVE | |
| 15. | 9S-9726 | [1] | COUPLING ASSEM. (45 degrees) | |
| 16. | 3T-6216 C | [1] | BLOCK | |
| 17. | 3T-6063 C | [1] | PLATE | |
| 18. | 0S-1594 C | [2] | BOLT | |
| 1D-4717 C | [2] | NUT | ||
| C | INDICATES CHANGE | |||
| H | ORDER BY THE INCH | |||
#SEBP13240351
3T-1635: LINES GP-REAR ATTACHMENT
3T1635 REAR ATTACHMENT LINES GROUP-3 CIRCUITS-PART 3 OF 3
PART OF 3T251 AND 3T317 HYDRAULIC CONTROL ARRANGEMENTS LISTED ON PAGES
169 & 170. AN ATTACHMENT
PART OF 3T251 AND 3T317 HYDRAULIC CONTROL ARRANGEMENTS LISTED ON PAGES
169 & 170. AN ATTACHMENT
For full view, you need register
Parts for your D7G TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2R-6276 C | [10] | CONNECTOR | |
| 2. | 3D-2824 C | [14] | SEAL | |
| 3. | 3T-6064 C | [1] | HOSE ASSEM. | |
| (Includes) | ||||
| 9S-0247 G | HOSE 48.8 in.(124 cm) | |||
| 8S-3759 | [1] | COUPLING ASSEM. (straight) | ||
| 4. | 3S-7166 | [2] | SLEEVE | |
| 5. | 9S-9726 | [1] | COUPLING ASSEM. (45 degrees) | |
| 6. | 8S-0023 C | [4] | CLIP (slot) | |
| 8S-0024 C | [4] | CLIP (tab) | ||
| 7. | 9S-4183 | [4] | PLUG | |
| 8. | 3T-1679 | [2] | BLOCK | |
| 9. | 3T-6065 C | [1] | HOSE ASSEM. | |
| (Includes) | ||||
| 9S-0247 G | HOSE 44 in.(113 cm) | |||
| 8S-3759 | [1] | COUPLING ASSEM. (straight) | ||
| 10. | 3S-7166 | [2] | SLEEVE | |
| 11. | 9S-9726 | [1] | COUPLING ASSEM. (45 degrees) | |
| 12. | 0T-0573 C | [2] | BOLT | |
| 13. | 3T-6066 C | [1] | HOSE ASSEM. | |
| (Includes) | ||||
| 9S-0247 G | HOSE 47.6 in.(121 cm) | |||
| 14. | 8S-6389 | [1] | COUPLING ASSEM. (90 degrees) | |
| 15. | 3S-7166 | [2] | SLEEVE | |
| 16. | 9S-9726 | [1] | COUPLING ASSEM. (45 degrees) | |
| 17. | 3T-6073 C | [1] | HOSE ASSEM. | |
| (Includes) | ||||
| 9S-0247 G | HOSE 53.9 in.(137 cm) | |||
| 18. | 8S-6389 | [1] | COUPLING ASSEM. (90 degrees) | |
| 19. | 3S-7166 | [2] | SLEEVE | |
| 20. | 9S-9726 | [1] | COUPLING ASSEM. (45 degrees) | |
| 21. | 3J-8573 C | [2] | PLATE | |
| 22. | 0S-1588 | [4] | BOLT | |
| 5M-2894 | [4] | WASHER | ||
| 23. | 3T-1670 | [2] | BRACKET | |
| C | INDICATES CHANGE | |||
| G | ORDER BY THE INCH | |||
#SEBP13240352
4W-6956: DRIVE GP-AUXILIARY
For full view, you need register
Parts for your D7G TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5B-5059 | [1] | BOLT | |
| 2S-0932 | [1] | WASHER-HARD | ||
| 2. | 3N-4922 | [1] | COVER-WATER PUMP | |
| 3. | 2P-0220 | [1] | GASKET-PUMP | |
| 4. | 6H-3957 | [1] | BALL BEARING | |
| 5. | 4W-6955 | [1] | SHAFT-AUXILIARY DRIVE | |
| 6. | 1B-8705 | [1] | KEY-WOODRUFF | |
| 7. | 4N-6139 | [1] | PULLEY-AUXILIARY DRIVE | |
| 8. | 6V-5759 | [1] | SEAL-O-RING | |
| 9. | 7B-2174 | [1] | SEAL-LIP TYPE | |
| 10. | 2W-7678 | [1] | GEAR AS (40 TEETH) |
#SEBP13240353
3T-0890: COUPLING GP
3T890 COUPLING GROUP-BREAKAWAY-HYDRAULIC LINES TO IMPLEMENTS
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your D7G TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP13240354
3T-0225: ROPS AR
3T225 ROLL-OVER PROTECTIVE SYSTEM ARRANGEMENT-PART 1
MODULAR CAB WITH SOUND SUPPRESSION
AN ATTACHMENT
MODULAR CAB WITH SOUND SUPPRESSION
AN ATTACHMENT
For full view, you need register
Parts for your D7G TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8N-1083 Y | [1] | ALTERNATOR GROUP | ||
| 6P-5183 Y | [1] | ROLL-OVER ARRANGEMENT | ||
| 9G-7585 Y | [1] | CAB PRESSURIZER GROUP | ||
| 6P-5415 Y | [1] | GAUGE GROUP | ||
| -OR- | ||||
| 3T-5074 Y | [1] | GAUGE GROUP | ||
| 6P-5427 Y | [1] | BRAKE GROUP | ||
| 6P-5677 Y | [1] | GOVERNOR CONTROL GROUP | ||
| 6P-6738 Y | [1] | CAB LINER GROUP | ||
| 6P-6783 Y | [1] | GEARSHIFT CONTROL GROUP | ||
| 6P-6904 Y | [1] | SAFETY BRACE GROUP | ||
| 3T-3847 Y | [1] | HOOD GROUP | ||
| 9P-9391 Y | [1] | MIRROR GROUP | ||
| 3T-0227 Y | [1] | BATTERY BOX GROUP | ||
| 3T-0401 Y | [1] | SPEEDOMETER AND TACHOMETER DRIVE GROUP | ||
| 3T-1207 Y | [1] | SUSPENSION SEAT GROUP-CAB | ||
| 2K-0400 | [1] | END-TO R.H. ROD ASSEMBLY | ||
| 1A-9252 | [1] | END-STEERING CLUTCH R.H. | ||
| 4H-5236 | [1] | ROD END-STEERING CLUTCH L.H. | ||
| 5B-9079 | [2] | NUT-STEERING CLUTCH R.H. & L.H. | ||
| 5J-4745 | [2] | ROD-STEERING CLUTCH R.H. & L.H. | ||
| 4H-5236 | [1] | END-TO L.H. ROD ASSEMBLY | ||
| 6P-7079 | [1] | ANGLE ASSEMBLY | ||
| 0S-1621 | [4] | BOLT-TO SUPPORT ASSEMBLY | ||
| 5P-1076 | [4] | WASHER-TO SUPPORT ASSEMBLY | ||
| 6P-5237 | [1] | COVER ASSEMBLY-UNDER R.H. DOOR SILL | ||
| 0S-0509 | [2] | BOLT-COVER ASSEMBLY TO CAB | ||
| 0T-0102 | [1] | BOLT-TO COVER COOLANT WARNING HOLES | ||
| 5M-2894 | [1] | WASHER-TO COVER COOLANT WARNING HOLES | ||
| 0T-0102 | [4] | BOLT-TO PLUG HOLES IN SEAT FRAME | ||
| 5M-2894 | [4] | WASHER-TO PLUG HOLES IN SEAT FRAME | ||
| 5P-7871 | [1] | FILM-INSTRUCTIONS-GEARSHIFT PATTERN | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13240355
3T-0225: ROPS AR
3T225 ROLL-OVER PROTECTIVE SYSTEM ARRANGEMENT-PART 2
MODULAR CAB WITH SOUND SUPPRESSION
AN ATTACHMENT
MODULAR CAB WITH SOUND SUPPRESSION
AN ATTACHMENT
For full view, you need register
Parts for your D7G TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5P-1075 | [4] | WASHER-TO COVER ASSEMBLY | ||
| 5H-0156 | [2] | SUPPORT ASSEMBLY-FOOTREST | ||
| 6P-5254 | [1] | LEVER | ||
| 6P-6201 | [1] | LEVER ASSEMBLY | ||
| 1B-4205 | [2] | NUT-TO LEVER ASSEMBLY | ||
| 5P-1076 | [2] | WASHER | ||
| 1A-1460 | [1] | BOLT-LEVER TO SHAFT | ||
| 6P-7106 | [2] | STRAP | ||
| 1D-4719 | [1] | NUT-LEVER TO SHAFT | ||
| 6P-5756 | [1] | GUIDE ASSEMBLY | ||
| 6P-5754 | [1] | PLUNGER ASSEMBLY | ||
| 9J-6257 | [1] | WIRE ASSEMBLY | ||
| 4S-5218 | * WIRE-13 IN. | |||
| 2L-8069 | [2] | TERMINAL | ||
| 031-3414 | [2] | SCREW-TO L.H. SEAT FRAME PLATE | ||
| 5P-9673 | [1] | FILM-PARKING BRAKE-ON INSIDE OF L.H. | ||
| ROPS LEG ABOVE PARKING BRAKE LEVER | ||||
| 7G-8278 | [1] | SLUG-TO HARNESS FUSE HOLDER-LIGHTS | ||
| 0T-0573 | [2] | BOLT-COVER ASSEMBLY TO CAB | ||
| FORM GMGO2590 | ||||
| *ORDER BY THE INCH | ||||
#SEBP13240356
6P-5183: ROPS AR
6P5183 ROLL-OVER PROTECTIVE SYSTEM ARRANGEMENT
PART OF 3T225 ROLL-OVER PROTECTIVE SYSTEM ARRANGEMENT LISTED ON PAGE 194
AN ATTACHMENT
PART OF 3T225 ROLL-OVER PROTECTIVE SYSTEM ARRANGEMENT LISTED ON PAGE 194
AN ATTACHMENT
For full view, you need register
Parts for your D7G TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6P-5185 Y | [1] | ROLL-OVER GROUP | ||
| 6P-5186 Y | [1] | CAB WIRING GROUP | ||
| 6P-5189 Y | [1] | WINDSHIELD WIPER GROUP | ||
| -OR- | ||||
| 3T-1941 Y | [1] | WINDSHIELD WIPER GROUP | ||
| 3T-1953 Y | [1] | WINDSHIELD WASHER GROUP | ||
| 6P-5434 Y | [1] | GOVERNOR CONTROL GROUP | ||
| 6P-5656 Y | [1] | STEERING BRAKE GROUP | ||
| 6P-5657 Y | [1] | STEERING CONTROL GROUP | ||
| 6P-8769 | [1] | COVER-TO TOP OF HYDRAULIC CONTROL | ||
| CONSOLE | ||||
| 031-3414 | [7] | SCREW-TO COVER | ||
| 6P-5235 | [1] | COVER ASSEMBLY-TO FRONT OF HYDRAULIC | ||
| CONTROL CONSOLE | ||||
| 8H-3526 | [8] | WASHER | ||
| 5P-1075 | [8] | WASHER TO COVER ASSEMBLY | ||
| 0L-1351 | [8] | BOLT-TO COVER ASSEMBLY-3/8 NC X 7/8 | ||
| (22 MM) | ||||
| 6P-5233 | [1] | FLOORPLATE ASSEMBLY-NEAR R.H. DOOR | ||
| 6P-5689 | [1] | SEAL | ||
| 8H-3526 | [6] | WASHER | ||
| 0S-1594 | [6] | BOLT-TO FLOORPLATE ASSEMBLY-3/8 NC X 1 | ||
| (25.5 MM) | ||||
| 5P-1075 | [6] | WASHER-TO FLOORPLATE ASSEMBLY | ||
| 6P-5240 | [1] | COVER ASSEMBLY-TO PANEL UNDER SEAT | ||
| 8H-3526 | [4] | WASHER | ||
| 0S-1594 | [4] | BOLT-TO COVER ASSEMBLY-3/8 NC X 1 | ||
| (25.5 MM) | ||||
| 5P-1075 | [4] | WASHER-TO COVER ASSEMBLY | ||
| 6P-4196 | [1] | FLOORPLATE ASSEMBLY-AT FRONT OF SEAT | ||
| 006-3801 | [8] | WASHER | ||
| 1F-0748 | [4] | NUT | ||
| 0S-1594 | [8] | BOLT-TO FLOORPLATE ASSEMBLY-3/8 NC X 1 | ||
| (25.5 MM) | ||||
| 5P-1075 | [8] | WASHER-TO FLOORPLATE ASSEMBLY | ||
| 6P-6043 | [1] | COVER-TO CAB ROOF | ||
| 2A-0762 | [8] | BOLT-TO COVER-1/4 NC X 5/8 (16.0 MM) | ||
| 5P-4115 | [8] | WASHER-TO COVER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13240357
9P-9373: WINDOW AS
9P9373 SLIDING WINDOW ASSEMBLY
REPLACED BY 6T9956-PAGE 197.01
PART OF 6P5185 ROLL-0VER PROTECTIVE STRUCTURE
AN ATTACHMENT
REPLACED BY 6T9956-PAGE 197.01
PART OF 6P5185 ROLL-0VER PROTECTIVE STRUCTURE
AN ATTACHMENT
For full view, you need register
Parts for your D7G TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-5680 H | SEAL 2.41m(95.08 in.) | ||
| 2. | 5P-8918 H | SEAL 1.12m(44.10 in.) | ||
| 3. | 7G-0070 | [1] | SLIDE ASSEM. | |
| 9P-7860 | [1] | LOCK ASSEM. | ||
| 9P-7859 C | [2] | SCREW | ||
| 4. | 9P-9396 | [1] | GLASS | |
| 5. | 2H-6622 C | [2] | SCREW | |
| 6. | 3T-1121 C | [1] | LOCK ASSEM. | |
| 7. | 9P-9395 | [1] | GLASS (tinted) | |
| C | INDICATES CHANGE | |||
| H | ORDER BY THE METER | |||
#SEBP13240358
6P-5213: ROPS GP
6P5213 ROLL-OVER PROTECTIVE STRUCTURE GROUP-OPEN
For full view, you need register
Parts for your D7G TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP13240359
6T-9956: WINDOW AS
6T9956 SLIDING WINDOW ASSEMBLY
REPLACES 9P9373 SLIDING WINDOW
PART OF 6P5185 ROLL-OVER PROTECTIVE STRUCTURE
AN ATTACHMENT
REPLACES 9P9373 SLIDING WINDOW
PART OF 6P5185 ROLL-OVER PROTECTIVE STRUCTURE
AN ATTACHMENT
For full view, you need register
Parts for your D7G TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-0178 | [1] | SEAL | |
| 2. | 5P-8918 BD | SEAL | ||
| 3. | 9P-9395 | [1] | GLASS | |
| 4. | 7T-1107 | [1] | FILLER | |
| 5. | 7T-0179 | [1] | SEAL | |
| 6. | 6T-9957 | [1] | SLIDE AS | |
| 9P-7860 | [1] | LOCK AS | ||
| 9P-7859 | [2] | SCREW | ||
| 7. | 9P-9396 | [1] | GLASS | |
| 8. | 2H-6622 | [2] | SCREW-MACHINE | |
| 9. | 3T-1121 | [1] | LOCK AS | |
| 10. | 7T-0181 | [1] | SEAL | |
| 11. | 7T-0180 | [1] | SEAL | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
