9N542 SEAL GP-CRANKSHAFT 227 LOGGER

BASIC ENGINE

CRANKSHAFT GP

0. 9N-0542 SEAL GP-CR

CAMSHAFT GP

1. 9N-0728 CAMSHAFT G

PISTON & ROD GP

2. 1W-2200 PISTON & R

CRANKSHAFT GP

3. CRANKSHAFT

PISTON & ROD GP

4. 1W-2200 PISTON & R
5. 1W-2200 PISTON & R
6. 2W-8413 PISTON GP
7. 1W-2200 PISTON & R

LIFTING GP-ENGINE

8. 7N-9911 LIFTING GP

CYLINDER HEAD GP

9. 9N-1105 CYLINDER H
0. INFORMATION

LOGGER 227 LOGGER 10W
227 LOGGER 10W00001-UP (MACHINE) POWERED BY 3208 ENGINE SEBP1325 227 10W (1981)

BASIC ENGINE

CRANKSHAFT GP

9N-6222 CRANKSHAFT GP

9N-0542 SEAL GP-CRANKSHAFT

CRANKSHAFT BEARING REPLACEMENTS

#SEBP13250010

9N-0542: SEAL GP-CRANKSHAFT

SEAL GP-CRANKSHAFT

9N542 SEAL GP-CRANKSHAFT

c467504 SEBP1325

For full view, you need register

Parts for your 227 LOGGER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-6660	[1]	SEAL GP-CRANKSHAFT
2.	7W-3200 C	[1]	SEAL GP-CRANKSHAFT
	C		CHANGE FROM PREVIOUS TYPE

#SEBP13250011

9N-0728: CAMSHAFT GP-SINGLE

CAMSHAFT GP-SINGLE

9N728 CAMSHAFT GP

c464589 SEBP1325

For full view, you need register

Parts for your 227 LOGGER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-3354 R	[1]	KIT-CAMSHAFT
	8T-2998 AF	[1]	LUBRICANT-CAM
	9N-5786 AF	[16]	LIFTER-VALVE
2.	5P-4283	[1]	DOWEL
3.	1N-4660 C	[1]	GEAR AS-CAMSHAFT DRIVE
			(102 TEETH)
4.	9L-7028	[2]	DOWEL
5.	9N-6218 C	[1]	PIN-THRUST
6.	4F-9325 C	[1]	GASKET
	A		NOT PART OF THIS GROUP
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	R		REMFG PART MAY BE AVAILABLE

#SEBP13250012

1W-2200: PISTON & ROD GP

PISTON & ROD GP

1W2200 PISTON & ROD GP
ENGINE S/N 79V8432-9764
ALSO PART OF 9N5669 CYLINDER BLOCK-FIELD INSTALLATION

c237817 SEBP1325

For full view, you need register

Parts for your 227 LOGGER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-9803	[1]	PIN-PISTON
2.	8N-7294	[2]	RETAINER-PIN
3.	9N-3504	[1]	ROD AS-CONNECTING
	9N-5082 C	[1]	BEARING-CONNECTING ROD
4.	9N-3832	[2]	BOLT-CONNECTING ROD
	9L-7669	[2]	NUT-CONNECTING ROD
5.	9N-5790 L	[1]	BEARING-CONNECTING ROD
	9N-5920 A	[1]	BEARING .25MM(.010IN)US
	9N-5921	[1]	BEARING .51MM(.020IN)US
	9N-5922	[1]	BEARING 1.27MM(.050IN)US
6.	9N-5632 CJL	[1]	PISTON GP
	9N-5754	[1]	BODY AS-PISTON
7.	9L-6233 L	[1]	RING-PISTON-TOP
8.	9L-9316 L	[1]	RING-PISTON (OIL)
9.	1W-2065 AN	[1]	PISTON GP .508MM(.02IN)
	1W-2064 C	[1]	BODY AS-PISTON
10.	9L-9673 N	[1]	RING-PISTON (OIL)
11.	9N-0581 N	[1]	RING-PISTON-TOP
12.	1W-2067 AN	[1]	PISTON GP 1.016MM(.04IN)
	1W-2066	[1]	BODY AS-PISTON
13.	9L-9323 N	[1]	RING-PISTON (OIL)
14.	9N-0578 N	[1]	RING-PISTON-TOP

	9N-0875	[1]	RING GP-PISTON (FOR PART MARKED J-
			INCL COMPLETE SET OF
			RINGS FOR ONE PISTON)
			L-STANDARD
			N-OVERSIZE
	A		NOT PART OF THIS GROUP
	C		CHANGE FROM PREVIOUS TYPE

#SEBP13250013

CRANKSHAFT BEARING REPLACEMENTS

SEBP13250013 SEBP1325

For full view, you need register

Parts for your 227 LOGGER:

CATERPILLAR SIS

Part No	Qty	Parts name
		CYLINDER BLOCK NOT REBORED
		CRANKSHAFT GROUND FOR UNDERSIZE BEARING
		I.D. OF:
8N-8976	[1]	.25 MM FRONT--NON GROOVED
8N-8972	[1]	.51 MM FRONT--NON GROOVED
8N-8974	[1]	1.27 MM FRONT--NON GROOVED
8N-9022	[3]	.25 MM INTERMEDIATE-GROOVED
8N-9023	[3]	.51 MM INTERMEDIATE-GROOVED
8N-9020	[3]	1.27 MM INTERMEDIATE-GROOVED
		CYLINDER BLOCK REBORED (.25 MM)
		(FOR BEARING OVERSIZE O.D.)
8N-8973	[1]	0 (STANDARD) FRONT--NON GROOVED
8N-8971	[1]	.51 MM FRONT--NON GROOVED
8N-8975	[1]	1.27 MM FRONT--NON GROOVED
8N-9021	[3]	0 (STANDARD) INTERMEDIATE--GROOVED
8N-9019	[3]	.51 MM INTERMEDIATE--GROOVED
8N-9018	[3]	1.27 MM INTERMEDIATE--GROOVED
		O.D.--OUTSIDE DIAMETER
		I.D.--INSIDE DIAMETER

#SEBP13250014

1W-2200: PISTON & ROD GP

PISTON & ROD GP

1W2200 PISTON & ROD GP
ENGINE S/N 79V10675-11008
ALSO PART OF 9N5669 CYLINDER BLOCK-FIELD INSTALLATION

c306526 SEBP1325

For full view, you need register

Parts for your 227 LOGGER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-9803	[1]	PIN-PISTON
2.	8N-7294	[2]	RETAINER-PIN
3.	1W-2961 CR	[1]	ROD AS-CONNECTION
	9N-5082	[1]	BEARING-CONNECTING ROD
4.	9N-3832	[2]	BOLT-CONNECTING ROD
	9L-7669	[2]	NUT-CONNECTING ROD
5.	9N-5790 L	[1]	BEARING-CONNECTING ROD
	9N-5920 A	[1]	BEARING .25MM(.010IN)US
	9N-5921	[1]	BEARING .51MM(.020IN)US
	9N-5922	[1]	BEARING 1.27MM(.050IN)US
6.	1W-5799 CJL	[1]	PISTON GP
	1W-5798 C	[1]	BODY AS-PISTON
7.	9L-6233 L	[1]	RING-PISTON-TOP
8.	9L-9316 L	[1]	RING-PISTON (OIL)
9.	1W-2065 AN	[1]	PISTON GP .508MM(.02IN)
	1W-2064	[1]	BODY AS-PISTON
10.	9L-9673 N	[1]	RING-PISTON (OIL)
11.	9N-0581 N	[1]	RING-PISTON-TOP
12.	1W-2067 AN	[1]	PISTON GP 1.016MM(.04IN)
	1W-2066	[1]	BODY AS-PISTON
13.	9L-9323 N	[1]	RING-PISTON (OIL)
14.	9N-0578 N	[1]	RING-PISTON-TOP

	9N-0875	[1]	RING GP-PISTON (FOR PART MARKED J-
			INCL COMPLETE SET OF
			RINGS FOR ONE PISTON)
			L-STANDARD
			N-OVERSIZE
	A		NOT PART OF THIS GROUP
	C		CHANGE FROM PREVIOUS TYPE
	R		REMFG PART MAY BE AVAILABLE

#SEBP13250015

1W-2200: PISTON & ROD GP

PISTON & ROD GP

1W2200 PISTON & ROD GP
ENGINE S/N 79V9765-10674
ALSO PART OF 9N5669 CYLINDER BLOCK-FIELD INSTALLATION

c301409 SEBP1325

For full view, you need register

Parts for your 227 LOGGER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-9803	[1]	PIN-PISTON
2.	8N-7294	[2]	RETAINER-PIN
3.	9N-3504	[1]	ROD AS-CONNECTING
	9N-5082	[1]	BEARING-CONNECTING ROD
4.	9N-3832	[2]	BOLT-CONNECTING ROD
	9L-7669	[2]	NUT-CONNECTING ROD
5.	9N-5790 L	[1]	BEARING-CONNECTING ROD
	9N-5920 A	[1]	BEARING .25MM(.010IN)US
	9N-5921	[1]	BEARING .51MM(.020IN)US
	9N-5922	[1]	BEARING 1.27MM(.050IN)US
6.	1W-2063 CJL	[1]	PISTON GP
	1W-2062	[1]	BODY AS-PISTON
7.	9L-6233 L	[1]	RING-PISTON-TOP
8.	9L-9316 L	[1]	RING-PISTON (OIL)
9.	1W-2065 AN	[1]	PISTON GP .508MM(.02IN)
	1W-2064	[1]	BODY AS-PISTON
10.	9L-9673 N	[1]	RING-PISTON (OIL)
11.	9N-0581 AN	[1]	RING-PISTON-TOP
12.	1W-2067 N	[1]	PISTON GP 1.016MM(.04IN)
	1W-2066	[1]	BODY AS-PISTON
13.	9L-9323 N	[1]	RING-PISTON (OIL)
14.	9N-0578 N	[1]	RING-PISTON-TOP

	9N-0875	[1]	RING GP-PISTON (FOR PART MARKED J-
			INCL COMPLETE SET OF
			RINGS FOR ONE PISTON)
			L-STANDARD
			N-OVERSIZE
	A		NOT PART OF THIS GROUP
	C		CHANGE FROM PREVIOUS TYPE

#SEBP13250016

2W-8413: PISTON GP

PISTON GP

2W8413 PISTON GP
ENGINE S/N 79V11009-UP
PART OF 1W2200 PISTON & ROD

c307441 SEBP1325

For full view, you need register

Parts for your 227 LOGGER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9L-6233	[1]	RING-PISTON-TOP (COMPRESSION)
2.	2W-8045	[1]	RING AS-PISTON (OIL)
3.	2W-8412	[1]	BODY AS-PISTON
4.	2W-8415 A	[1]	BODY AS-PISTON
	2W-8647 A	[1]	RING GP-PISTON
			1.02MM(.04IN)OS
	9N-0578	[1]	RING-PISTON-TOP (COMPRESSION)
	2W-8417	[1]	RING-PISTON (OIL)
5.	2W-8414 A	[1]	BODY AS-PISTON
	2W-8646 A	[1]	RING GP-PISTON
			.51MM(.02IN)OS
	9N-0581	[1]	RING-PISTON-TOP (COMPRESSION)
	2W-8416	[1]	RING-PISTON (OIL)
	A		NOT PART OF THIS GROUP

#SEBP13250017

1W-2200: PISTON & ROD GP

PISTON & ROD GP

1W2200 PISTON & ROD GP
ENGINE S/N 79V11009-UP
2W8413-PAGE 10B
ALSO PART OF 9N5669 CYLINDER BLOCK-FIELD INSTALLATION

c503848 SEBP1325

For full view, you need register

Parts for your 227 LOGGER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-9803	[1]	PIN-PISTON
2.	8N-7294	[2]	RETAINER-PIN
3.	7E-4728 CR	[1]	ROD AS-CONNECTING
	9N-5082	[1]	BEARING-CONNECTING ROD
4.	9N-3832	[2]	BOLT-CONNECTING ROD
	9L-7669	[2]	NUT-CONNECTING ROD
5.	7E-7894 C	[1]	BEARING-ROD
	9N-5920 A	[1]	BEARING .25MM(.010IN)US
	9N-5921 A	[1]	BEARING .51MM(.020IN)US
	9N-5922 A	[1]	BEARING 1.27MM(.050IN)US
6.	2W-8413 CY	[1]	PISTON GP (STANDARD)

			THE FOLLOWING REPAIR
			KIT IS AVAILABLE:
	9Y-6201 C	[1]	KIT-ROD BEARING
			(INCL A COMPLETE SET
			OF STANDARD BEARINGS)
	A		NOT PART OF THIS GROUP
	C		CHANGE FROM PREVIOUS TYPE
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP13250018

7N-9911: LIFTING GP

LIFTING GP

7N9911 LIFTING GP

c349249 SEBP1325

For full view, you need register

Parts for your 227 LOGGER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3H-5368 C	[3]	BOLT
2.	5P-8244 C	[6]	WASHER
3.	6N-0032	[1]	BRACKET AS
4.	1W-1472 C	[1]	BRACKET-LIFTING
5.	4F-8965 C	[3]	BOLT
	C		CHANGE FROM PREVIOUS TYPE

#SEBP13250019

9N-1105: CYLINDER HEAD GP

CYLINDER HEAD GP

9N1105 CYLINDER HEAD GP*R
ENGINE S/N 79V8432-8714

c227148 SEBP1325

For full view, you need register

Parts for your 227 LOGGER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7H-3171	[1]	PLUG-PIPE
2.	5M-6213	[3]	PLUG-PIPE
3.	0L-1329	[8]	BOLT (1/2-13X3 IN)(LOCATION E)
4.	3H-7654	[36]	WASHER-HARD (13.5X22.5X3MM THK)
5.	5B-9603	[6]	BOLT (3/8-16X5 IN)(LOCATION D)
6.	6F-5282	[8]	BOLT (1/2-13X5.25 IN)(LOCATION A)
7.	2B-2006	[12]	BOLT (1/2-13X4.75 IN)(LOCATION F)
8.	2B-0947	[8]	BOLT (1/2-13X2.25 IN)(LOCATION G)
9.	9N-3111	[2]	CYLINDER HEAD AS
			(EACH INCLUDES)
	9L-7657	[1]	PLUG-CUP
10.	9N-2837	[4]	INSERT-SEAT (EXHAUST)
11.	0L-1329	[3]	BOLT (1/2-13X3 IN)(LOCATION H)
12.	8M-5860	[4]	PLUG-CUP
13.	5M-6214	[1]	PLUG-PIPE
14.	5M-6213	[1]	PLUG-PIPE
15.	0S-1571	[1]	BOLT (3/8-16X1.75 IN)(LOCATION C-LEFT HEAD)
	9L-9166	[1]	STUDBOLT (3/8-16X3.63 IN)(LEFT HEAD)
16.	9L-8889	[16]	WASHER
17.	9N-3387	[16]	SPRING-VALVE OUTER
18.	9L-9425	[16]	RETAINER-SPRING
19.	2A-4429	[32]	LOCK-RETAINER
20.	9L-9164	[2]	GASKET-CYLINDER HEAD
21.	9L-7683	[8]	VALVE-EXHAUST
22.	9L-7682	[8]	VALVE-INLET
	2N-8943 A	[8]	INSERT-VALVE SEAT (INLET)
23.	9N-0906	[16]	SPACER

Information:

BASIC ENGINE

CRANKSHAFT GP

Special Instruction

Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}

Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}

Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}

Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}

Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}

Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}

Specifications

Crankshaft
3208 VEHICULAR ENGINE

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Reuse And Salvage Guidelines

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}

Disassembly and Assembly

Crankshaft Main Bearings
3208 VEHICULAR ENGINE FOR 227 LOGGER

Crankshaft Pulley
3208 VEHICULAR ENGINE FOR 227 LOGGER

Crankshaft Front Seal
3208 VEHICULAR ENGINE FOR 227 LOGGER

Crankshaft Rear Seal And Wear Sleeve
3208 VEHICULAR ENGINE FOR 227 LOGGER

Crankshaft And Gear
3208 VEHICULAR ENGINE FOR 227 LOGGER

Service Magazine

1980 Caterpillar Remanufactured Products Catalog Is Now Available{0374}
1980/06/23

Comparison And Applications Of Six And Eight Counterweight Crankshafts{1202,1156}
1981/08/17

New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/01/25

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07

Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings{1202,1203,1400,1405}
1982/06/21

Wider Crankshaft Gear Used{1202,1204,1206}
1982/10/11

New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/10/18

6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01

Check Cylinder Bores For Chamfer During Reconditioning{1202,1222,1223}
1983/02/14

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

Crankshaft Failures{1202,1230}
1983/11/21

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21

New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01

Rebuilt Standard Size Crankshafts Used In Some Remanufactured Engines{1202}
1984/12/10

New Rear Crankshaft Seal Has Longer Service Life{1161}
1985/01/21

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18

Put Grease On Front Crankshaft Seal Before Installing The Crankshaft Pulley And Damper{1160}
1986/01/13

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

Caterpillar Crankshaft Heat Code Locations{1202}
1986/10/20

Lightening Holes Not Drilled In Some Crankshafts{1202}
1977/01/24

Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11

Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

Engines Can Use Crankshafts With Either Six Or Eight Counterweights {1202}
1979/09/10

New Front Crankshaft Seal Requires New Installer Tool {1160,1202,0704}
1989/05/22

New Pistons Used With Two Keystone Compression Rings{1156,1205,1214,1215}
1989/06/19

New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20

40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 227 :

9N-6222 CRANKSHAFT GP

9N-5669 CYLINDER BLOCK GP

9L-6065 COVER GP-CYLINDER BLOCK

9N-3761 CYLINDER BLOCK GP

1W-0332 ENGINE AR

1W-2578 ENGINE AR

9N-0728 CAMSHAFT GP-SINGLE

1W-2200 PISTON & ROD GP

CRANKSHAFT BEARING REPLACEMENTS

1W-2200 PISTON & ROD GP

2W-8413 PISTON GP

1W-2200 PISTON & ROD GP

7N-9911 LIFTING GP

Truck sale:

CATERPILLAR 227 1987
- TRACK EXCAVATORS
WESTERN STATES
500 E. Overland Road - Meridian - Idah

USD $15,900

1988 CAT 227

Carmody Crane LLC.
Temecula, California