AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

963 TRACK LOADER / HIGH DRIVE / 06Z00001-UP (MACHINE) POWERED BY 3304 ENGINE LUBRICATION SYSTEM Caterpillar SIS



TRACK LOADER 963 TRACK LOADER 06Z
 963 TRACK LOADER / HIGH DRIVE / 06Z00001-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1338 963 06Z   (1981)

Parts group 963:

  For full view, you need register
LUBRICATION SYSTEM
BREATHER GP
BREATHER GP
1P-4244 BREATHER GP
1P4244 BREATHER GROUP
FILLER GP-ENGINE OIL
FILLER GP-OIL
7N-1620 FILLER GP-OIL
7N1620 OIL FILLER GROUP
SERIAL NO. 6Z1 TO 832,834 TO 839,842,843,845 TO 848,850 TO 854,857,858,
860 TO 863,865,870,873,875 TO 883,886,887,893 TO 897,900 TO 916,923,
926,924 AND 6Z929 INCLUSIVE
FILLER GP-OIL
7N-1620 FILLER GP-OIL
7N1620 OIL FILLER GROUP
SERIAL NO. 6Z840,841,844,849,855,856,859,864,866 TO 869,871,872,874,
884,885,888 TO 892,898,899,917 TO 925,927,928 & 6Z930-UP
FILTER GP-ENGINE OIL
FILTER GP-ENGINE OIL
2P-6475 FILTER GP-ENGINE OIL
2P6475 OIL FILTER GROUP
COOLER GP-FLTR BASE & ENG OIL
2W-7649 COOLER GP-FLTR BASE & ENG OIL
2W7649 FILTER BASE & ENGINE OIL COOLER GP
2W7648-PAGE 31.02
COOLER GP-FLTR BASE & ENG OIL
2W-7648 COOLER GP-FLTR BASE & ENG OIL
2W7648 FILTER BASE & ENGINE OIL COOLER GP
8N4457-PAGE 31.03
PART OF 2W7649 FILTER BASE & ENGINE OIL COOLER
BASE GP-OIL FILTER
8N-4457 BASE GP-OIL FILTER
8N4457 BASE GP-OIL FILTER
PART OF 2W7648 FILTER BASE & ENGINE OIL COOLER
FUMES DISPOSAL GP
FUMES DISPOSAL GP
3N-3392 FUMES DISPOSAL GP
3N3392 FUMES DISPOSAL GROUP
GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
7N-1718 GAUGE GP-OIL LEVEL (DIPSTICK)
7N1718 OIL LEVEL GAUGE GROUP
LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
7N-1719 LINES GP-ENGINE OIL
7N1719 ENGINE OIL LINES GROUP
LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
8N-2594 LINES GP-TURBOCHARGER OIL
8N2594 LINES GP-TURBOCHARGER OIL
PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
2P-1784 PUMP GP-ENGINE OIL
2P1784 OIL PUMP GROUP
2P1785 PUMP PARTS ARE SHOWN ON PAGE 26
PUMP GP-ENGINE OIL
2P-1785 PUMP GP-ENGINE OIL
2P1785 OIL PUMP GROUP*R
PART OF 2P1784 OIL PUMP GROUP SHOWN ON PAGE 25

Information:

(For parts list, see above)

Specifications
Oil Breather Cap
963 TRACK-TYPE LOADER
Tool Operating Manual
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 8G4418 Vandalism Guard Group{7451}
Installation of 8G4418 Vandalism Guard Group{7451}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Bracket And Clamp Added To Prevent Vibration Of Oil Filler Tube{1316}
1982/12/13
New Vandalism Guard Prevents Damage When The Platform Is Tilted{7315}
1983/04/25
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Special Instruction
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Service Letter-NACD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Oil Filter
963 TRACK-TYPE LOADER
Charge Pressure Relief Cooler Bypass Valves<BR> (9J1839 Relief Valve, 3G4070 Bypass Valve)
963 TRACK-TYPE LOADER
Service Letter-China
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Asia
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Letter-APD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Disassembly and Assembly
Engine Oil Cooler
963 TRACK-TYPE LOADER
Oil Filter Base
963 TRACK-TYPE LOADER
Oil Cooler Bypass Valve
963 TRACK-TYPE LOADER
Engine Oil Filter Base - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Engine Oil Filter Base - Install
3304B and 3306B Engines for Caterpillar Built Machines
Engine Oil Filter Base - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Engine Oil Filter Base - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Oil Filter Base Has Larger Oil Passages; Some Bases Need Modification{1306}
1980/08/11
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Improvements To Oil Level Gauge Group; Easier Access To Engine Oil Filter{1318,1306}
1983/01/10
Common Drain Pipe For Engine Or Transmission Oil{1318,3179}
1983/08/15
New Oil Filter Base Assembly Used In Filter Base Group{1306}
1984/04/16
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
New High Efficiency Oil Filters are Now Available {1308}
2004/03/22
New High Efficiency Oil Filters are Now Available {1308}
2006/08/21
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Improvements To Oil Level Gauge Group; Easier Access To Engine Oil Filter{1318,1306}
1983/01/10
Special Instruction
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Service Magazine
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Special Instruction
Installation of 8G4418 Vandalism Guard Group{7451}
Installation of 8G4418 Vandalism Guard Group{7451}
Technical Information Bulletin
3300 Engine Oil Level Maintenance And High Oil Consumption
3300 Engine Oil Level Maintenance And High Oil Consumption
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Improvements To Oil Level Gauge Group; Easier Access To Engine Oil Filter{1318,1306}
1983/01/10
New Vandalism Guard Prevents Damage When The Platform Is Tilted{7315}
1983/04/25
New Oil Filter Base Assembly Used In Filter Base Group{1306}
1984/04/16
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Improved Prelube Pressure Switch Available {1400,1435,1319}
1995/09/11
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Specifications
Oil Pump
963 TRACK-TYPE LOADER
Engine Oil Pressure
963 TRACK-TYPE LOADER
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Oil Pump
963 TRACK-TYPE LOADER
Engine Oil Pump - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Engine Oil Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines
Engine Oil Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Engine Oil Pump - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Oil Pump Groups Do Not Require Key On Drive Shaft {1304}
1993/02/15
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Service Magazine
New Oil Pump Groups Do Not Require Key On Drive Shaft {1304}
1993/02/15
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Reuse And Salvage Guidelines
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Contamination Control Guidelines
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Engine News
Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Truck sale:

Caterpillar 963K, track loaders, Construction
394,800 
Caterpillar 963K, track loaders, Construction
- track loaders
ZIEGLER CAT
Caterpillar 963K, track loaders, Construction
244,373 
Caterpillar 963K, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 963K, track loaders, Construction
386,250 
Caterpillar 963K, track loaders, Construction
- track loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar 963, track loaders, Construction
 
Caterpillar 963, track loaders, Construction
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 963K, track loaders, Construction
148,500 
Caterpillar 963K, track loaders, Construction
- track loaders
ALTORFER INDUSTRIES
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.