AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9J8288 HYDROSTATIC PISTON LINK MOTOR GROUP-FIXED DISPLACEMENT-2 REQUIRED- PART 2 SERIAL NO. 6Z1 TO 6Z1100 INCLUSIVE 963


POWER TRAIN
MOTOR GP
RETAINER GP-MOTOR
PUMP GP
VALVE GP-SHUTTLE
VALVE GP-RELIEF

TRACK LOADER 963 TRACK LOADER 06Z
 963 TRACK LOADER / HIGH DRIVE / 06Z00001-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1338 963 06Z   (1981)

POWER TRAIN

MOTOR GP
MOTOR GP-PISTON
9J-8288 MOTOR GP-PISTON
9J-8288 MOTOR GP-PISTON
MOTOR GP-PISTON
4T-3071 MOTOR GP-PISTON
4T-3071 MOTOR GP-PISTON
 

#SEBP13380320
 

9J-8288: MOTOR GP-PISTON

9J8288 HYDROSTATIC PISTON LINK MOTOR GROUP-FIXED DISPLACEMENT-2 REQUIRED-
PART 2 SERIAL NO. 6Z1 TO 6Z1100 INCLUSIVE
c232488 SEBP1338
9J8288 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-7854 [1] RING  
2. 8J-6244 [1] RACE & ROLLER ASSEM. (outer)  
  8J-6243 [1] RACE (inner)  
3. 6J-7855 [2] RING  
4. 8J-6274 [1] RING  
5. 6J-7846 [3] RACE  
6. 3G-9680 [1] SHAFT  
7. 5H-6005 [3] SEAL  
8. 0S-1618 [2] BOLT  
9. 0S-1566 [1] BOLT  
  8J-6236 [1] LOCK  
10. 3G-2629 [1] RETAINER  
11. 9J-5716 [1] TUBE  
  8J-0438 [1] SPRING  
12. 9D-8042 [1] SEAL  
13. 3G-4530 [1] SPRING  
14. 3S-6867 [1] BEARING  
15. 9J-8052 [1] RETAINER  
16. 1U-4805 R [9] PISTON ASSEM.  
    (Each Includes)
17. 8J-6276 [1] RETAINER  
18. 6J-7836 [1] RING  
19. 9J-8051 [1] RETAINER  
20. 1U-2035 [1] BARREL ASSEM.  
21. 1J-2176 [1] SEAL  
22. 8J-6273 [9] RING  
23. 3F-5792 [1] SEAL  
24. 5H-3182 [1] PIN  
25. 4T-0905 [1] JOINT ASSEM.  
    (Includes)
  2R-1256 [2] RING  
26. 8J-6277 H [1] SHIM 1.245 mm(.049 in.) thick  
  8J-6278 H [5] SHIM .0762 mm(.003 in.) thick  
  8J-6279 H [5] SHIM .1270 mm(.005 in.) thick  
27. 8J-6242 [1] SEAL  
  H   USE AS REQUIRED
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13380321
 

4T-3071: MOTOR GP-PISTON

4T3071 HYDROSTATIC PISTON LINK MOTOR GROUP (2 REQUIRED) PART 1
SERIAL NO. 6Z1101-UP
4T3056 VALVE PARTS ARE SHOWN ON PAGE 120A
c307727 SEBP1338
4T3071 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-2695 [6] BOLT  
2. 9M-1974 [6] WASHER  
3. 4T-1579 [1] RETAINER  
4. 3G-3098 [1] BODY-LOWER  
5. 9S-9739 [16] BOLT 68.5MM(2.7 IN.) LONG  
6. 3G-5755 [1] PLATE AS-DRIVE  
  3G-3739 [9] INSERT-BEARING  
7. 8J-6239 [1] LOCK-NUT  
8. 3G-3101 [1] BODY-UPPER  
9. 8B-1312 [2] DOWEL  
10. 4B-4158 [4] SCREW  
11. 8J-2559 [1] PLATE-CAUTION (CAUTION)  
12. 4T-3060 [1] HEAD-MOTOR  
13. 9S-8008 [2] PLUG-O-RING  
  3D-2824 [2] SEAL-O-RING  
14. 1B-9575 [4] BOLT  
15. 4T-3056 Y [1] VALVE GP-SHUTTLE  
16. 7F-8268 [1] SEAL-O-RING  
17. 9K-7290 [4] BOLT-12 POINT HEAD (3.25 IN.)LONG  
18. 3G-5940 [1] NUT  
19. 9J-0747 [1] BEARING AS  
20. 1H-5338 [1] CUP-ROLLER BEARING  
  2K-5097 [1] CONE-ROLLER BEARING  
21. 8J-6870 [1] CUP-ROLLER BEARING  
22. 4T-3064 [1] PLATE-PORT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13380322
 

4T-3071: MOTOR GP-PISTON

4T3071 HYDROSTATIC PISTON LINK MOTOR GROUP-(2 REQUIRED)-PART 2
SERIAL NO. 6Z1101-UP
c342613 SEBP1338
4T3071 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2676 [1] RETAINER  
2. 1U-1967 [1] BEARING-ROLLER  
3. 035-2297 [1] RING-RETAINING  
4. 7J-4169 C [1] RING-SNAP  
5. 4T-2674 [1] RACE-THRUST  
6. 4T-3059 [1] SHAFT  
7. 5H-6005 [2] SEAL-O-RING  
8. 0S-1618 [2] BOLT  
9. 0S-1566 [1] BOLT  
  8J-6236 [1] LOCK  
10. 4T-3066 [1] RETAINER  
11. 9J-5716 [1] TUBE  
  8J-0438 [1] SPRING  
12. 9D-8042 [1] SEAL-O-RING  
13. 4T-3055 [1] SPRING  
14. 4T-2603 C [1] BEARING-THRUST  
15. 4T-2625 [1] RETAINER  
16. 1U-4805 R [9] PISTON AS  
    (EACH AS. INCLUDES)
17. 8J-6276 [1] RETAINER  
18. 6J-7836 [1] RING-SNAP  
19. 9J-8051 [1] RETAINER  
20. 1U-1965 R [1] BARREL AS-CYLINDER  
21. 1J-2176 [1] SEAL-O-RING  
22. 8J-6273 [9] RING-RETAINING  
23. 3F-5792 C [1] SEAL-O-RING  
24. 5H-3182 [1] PIN-SPRING  
25. 4T-7480 C [1] UNIVERSAL JOINT AS  
  2R-1256 [2] RING-RETAINING  
26. 8J-6277 B [1] SHIM 1.245MM(.049IN.)THK  
  8J-6278 B [5] SHIM .0762MM(.003IN.)THK  
  8J-6279 B [5] SHIM .1270MM(.005IN.)THK  
27. 3G-2673 C [1] SEAL-LIP TYPE  
28. 0S-0130 [1] PIN  
29. 4T-2675 [1] RACE-THRUST  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13380323
 

4T-5739: RETAINER GP-MOTOR

4T5739 MOTOR RETAINER GROUP-SERVICE
FIELD INSTALLATION
SERIAL NO. 6Z1 TO 6Z1100 INCLUSIVE
SEBP13380323 SEBP1338
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  4T-5737 [1] SHAFT  
   
  4T-5738 [1] RETAINER  
   
  7J-4169 [1] RING  
   
  0S-0130 [1] PIN  
 

#SEBP13380324
 

9J-4833: ROTATING GP-PUMP

9J4833 AXIAL PISTON PUMP GROUP-VARIABLE IDSPLACEMENT-L.H.
TRANSMISSION SERIAL NO. 4TA1 TO 4TA1396 INCLUSIVE
PART OF 3G1197 HYDROSTATIC POWER CONTROL ARRANGEMENT LISTED ON PAGE 95
c180252 SEBP1338
9J4833 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2423 [1] SHAFT  
2. 7J-8893 [1] CONE  
3. 3G-3150 [1] PLATE (retraction)  
4. 034-4160 [8] BOLT  
  9M-1974 [8] WASHER  
5. 9J-8667 R [1] BARREL ASSEM.  
6. 8J-6890 [1] SPRING  
7. 1U-1749 [1] PLATE (port)  
8. 3P-1210 [1] CONE  
9. 1K-6985 [1] RING  
10. 8J-0237 [2] SPACER  
11. 9J-8727 [9] PISTON ASSEM.  
12. 3G-5750 [2] BEARING (retraction)  
13. 8J-0218 H [6] SHIM .127mm(.005 in.)thick  
  8J-0217 H [4] SHIM .0508mm(.002 in.)thick  
14. 3G-4779 [1] PLATE  
15. 3G-6449 [1] SWASHPLATE ASSEM. (L.H.)  
    (Includes)
16. 3G-4600 [2] BUSHING  
17. 4H-1641 [1] PIN  
18. 8M-8489 [1] DOWEL  
19. 5B-5821 [1] DOWEL  
20. 5P-6663 [2] CONE  
  H   USE AS REQUIRED
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13380325
 

9J-4834: PUMP GP-AXIAL PISTON

9J4834 AXIAL PISTON PUMP GROUP-VARIABLE DISPLACEMENT-R.H.
TRANSMISSION SERIAL NO. 4TA1 TO 4TA1396 INCLUSIVE
PART OF 3G1197 HYDROSTATIC POWER CONTROL ARRANGEMENT LISTED ON PAGE 95
c180253 SEBP1338
9J4834 PUMP GP-AXIAL PISTON Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2423 [1] SHAFT  
2. 7J-8893 [1] CONE  
3. 3G-3150 [1] PLATE (retraction)  
4. 034-4160 [8] BOLT  
  9M-1974 [8] WASHER  
5. 9J-8667 R [1] BARREL ASSEM.  
6. 8J-6890 [1] SPRING  
7. 1U-1749 [1] PLATE (port)  
8. 3P-1210 [1] CONE  
9. 1K-6985 [1] RING  
10. 8J-0237 [2] SPACER  
11. 9J-8727 [9] PISTON ASSEM.  
12. 3G-5750 [2] BEARING (retraction)  
13. 8J-0218 H [6] SHIM .127mm(.005 in.)  
  8J-0217 H [4] SHIM .0508 mm(.002 in.)  
14. 3G-4779 [1] PLATE  
15. 3G-6450 [1] SWASHPLATE ASSEM. (R.H.)  
    (Includes)
16. 3G-4600 [2] BUSHING  
17. 4H-1641 [1] PIN  
18. 8M-8489 [1] DOWEL  
19. 5B-5821 [1] DOWEL  
20. 5P-6663 [2] CONE  
  H   USE AS REQUIRED
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13380326
 

4T-5568: PUMP GP-AXIAL PISTON

4T5568 AXIAL PISTON PUMP GROUP-VARIABLE DISPLACEMENT-L.H.
TRANSMISSION SERIAL NO. 4TA1397-UP
PART OF 3G1197 HYDROSTATIC POWER CONTROL ARRANGEMENT LISTED ON PAGE 95
c310358 SEBP1338
4T5568 PUMP GP-AXIAL PISTON Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2423 [1] SHAFT  
2. 7J-8893 [1] CONE-ROLLER BEARING  
3. 3G-3150 [1] PLATE-RETRACTION  
4. 034-4160 [8] BOLT-SELF LOCKING  
  9M-1974 [8] WASHER  
5. 9J-8667 R [1] BARREL AS  
6. 8J-6890 [1] SPRING  
7. 4T-0931 [1] PLATE (PORT)  
8. 3P-1210 [1] CONE-ROLLER BEARING  
9. 1K-6985 [1] RING-RETAINING  
10. 8J-0237 [2] SPACER-SPRING  
11. 4T-5566 R [9] PISTON AS  
12. 3G-5750 [2] BEARING-PLATE (RETRACTION)  
13. 8J-0218 B [6] SHIM .127MM(.005IN)THK  
  8J-0217 B [4] SHIM .0508MM(.002IN)THK  
14. 3G-4779 [1] PLATE-WEAR  
15. 3G-6449 [1] SWASHPLATE AS-LH  
16. 3G-4600 [2] BUSHING  
17. 4H-1641 [1] PIN-SPRING  
18. 8M-8489 [1] DOWEL  
19. 5B-5821 [1] PIN-DOWEL  
20. 5P-6663 [2] CONE-ROLLER BEARING  
  B   USE AS REQUIRED
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13380327
 

4T-5567: ROTATING GP-PUMP

4T5567 AXIAL PISTON PUMP GROUP-VARIABLE DISPLACEMENT-R.H.
TRANSMISSION SERIAL NO. 4TA1397-UP
PART OF 3G1197 HYDROSTATIC POWER CONTROL ARRANGEMENT LISTED ON PAGE 95
c310357 SEBP1338
4T5567 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2423 [1] SHAFT  
2. 7J-8893 [1] CONE-ROLLER BEARING  
3. 3G-3150 [1] PLATE-RETRACTION  
4. 034-4160 [8] BOLT-SELF LOCKING  
  9M-1974 [8] WASHER  
5. 9J-8667 R [1] BARREL AS  
6. 8J-6890 [1] SPRING  
7. 4T-0931 [1] PLATE (PORT)  
8. 3P-1210 [1] CONE-ROLLER BEARING  
9. 1K-6985 [1] RING-RETAINING  
10. 8J-0237 [2] SPACER-SPRING  
11. 4T-5566 R [9] PISTON AS  
12. 3G-5750 [2] BEARING-PLATE (RETRACTION)  
13. 8J-0218 B [6] SHIM .127MM(.005IN)  
  8J-0217 B [4] SHIM .0508MM(.002IN)  
14. 3G-4779 [1] PLATE-WEAR  
15. 3G-6450 [1] SWASHPLATE AS-RH  
16. 3G-4600 [2] BUSHING  
17. 4H-1641 [1] PIN-SPRING  
18. 8M-8489 [1] DOWEL  
19. 5B-5821 [1] PIN-DOWEL  
20. 5P-6663 [2] CONE-ROLLER BEARING  
  B   USE AS REQUIRED
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13380328
 

3G-3253: VALVE GP-SHUTTLE

3G3253 SHUTTLE VALVE GROUP
SERIAL NO. 6Z1 TO 6Z1100 INCLUSIVE
PART OF 9J8288 HYDROSTATIC PISTON LINK MOTOR GROUP SHOWN ON PAGE 116
c225373 SEBP1338
3G3253 VALVE GP-SHUTTLE Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-3838 [2] PLUG ASSEM.  
    (Each Includes)
2. 9L-9766 [1] PIN  
3. 3J-1907 [2] SEAL  
4. 4B-9783 [2] BALL  
5. 3G-3252 [1] BODY ASSEM.  
6. 3G-3835 [1] PIN  
 

#SEBP13380329
 

3G-0257: VALVE GP-RELIEF

3G257 SERVO RELIEF VALVE GROUP-PILOT OPERATED
SERIAL NO. 4TA1 TO 4TA1970 INCLUSIVE
PART OF 1U2222 & 3G3304 TRANSMISSION CONTROL
c226737 SEBP1338
3G0257 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-3726 [1] NUT  
2. 3G-3857 [2] GASKET  
3. 3G-3854 [1] CAP  
4. 5P-8356 [1] SEAL-O-RING  
5. 061-7539 [1] SEAL-O-RING  
6. 8L-2746 [1] SEAL-O-RING  
 

Information:

Special Instruction
Installation Of 3G3739 And 4T3259 Bearing Inserts{4351}
Installation Of 3G3739 And 4T3259 Bearing Inserts{4351}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for 963 and 963B Track-Type Loader Transmission{3203, 4351}
Bench Test Procedure for 963 and 963B Track-Type Loader Transmission{3203, 4351}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Track Motors<BR> (9J8288)
963 TRACK-TYPE LOADER
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Universal Joint Assemblies For Hydraulic Link Motors In 943-973 Track Loaders, 225-245B Excavators, 235 and 245 Front Shovels, and227 Loggers{0599, 3251, 4351, 5058}
Universal Joint Assemblies For Hydraulic Link Motors In 943-973 Track Loaders, 225-245B Excavators, 235 and 245 Front Shovels, and227 Loggers{0599, 3251, 4351, 5058}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for 963 and 963B Track-Type Loader Transmission{3203, 4351}
Bench Test Procedure for 963 and 963B Track-Type Loader Transmission{3203, 4351}
Disassembly and Assembly
Track Motors
963 TRACK-TYPE LOADER
Service Magazine
Shorter Bolts Used In Four Locations To Fasten Piston Motor Head To Body{3201,4351,5058}
1982/03/01
New Shaft And Retainer Available For Field Installation In Piston Type Hydraulic Motors{5058,3201,4351}
1982/07/19
New Track Motor{3201,4351,5058}
1983/07/11
Use Oversize Insert To Rebuild Drive Plate Assembly In Track Motors{4351}
1983/11/14
New Universal Joint Used In Piston Motor Group{3201}
1983/11/14
Identification Grooves Used On Slippers For Pistons In Hydraulic Pumps And Motors{5070,5058}
1984/11/26
Check Track Motor Universal Joints Before Installation{3201}
1985/03/25
Identification Of Track Motor Universal Joint Assemblies{3251,3201,5058}
1985/05/27
New Universal Joint Assembly Used In Hydrostatic Piston Link Motor Group{3200,3203}
1985/12/16
Determining Track Motor Leakage{3201}
1987/03/02
New Barrel Assembly Used In Hydrostatic Piston Link Motor Groups{3201}
1988/02/22
New Steel-Backed Bronze Port Plate Gives Longer Head Life To Track Motors {3201}
1988/05/02
New Track Motor Has New Lubrication Tube And Shaft {4351}
1989/05/08
Measuring Head Wear In Hydrostatic Transmissions And Track Motors{3203,3222,4351}
1990/02/19
New Barrel Assembly And Undercut Port Plate Used In Piston Track Motor Groups{3203,5070}
1990/03/12
New Thinner Shims Available For Bearing Adjustment In Hydrostatic Power Case Groups{3221}
1990/09/24
Remanufactured Caterpillar Piston Pump And Motor Barrels Available{5070,3208,4351,5058}
1990/12/17

Caterpillar Parts SIS Catalog 963 :

MOTOR GP-PISTON
9J-8288 MOTOR GP-PISTON
PUMP GP-GEAR
1U-0390 PUMP GP-GEAR
PUMP GP-GEAR
3G-2185 PUMP GP-GEAR
CYLINDER GP
3G-5016 CYLINDER GP
CYLINDER GP
3G-5017 CYLINDER GP
FILTER GP
3G-1856 FILTER GP
FILTER GP
3G-1856 FILTER GP
LINES GP-HYDROSTATIC
7P-2267 LINES GP-HYDROSTATIC
MOTOR GP-PISTON
4T-3071 MOTOR GP-PISTON
4T-3071 MOTOR GP-PISTON
4T-5739 RETAINER GP-MOTOR
ROTATING GP-PUMP
9J-4833 ROTATING GP-PUMP
PUMP GP-AXIAL PISTON
9J-4834 PUMP GP-AXIAL PISTON
PUMP GP-AXIAL PISTON
4T-5568 PUMP GP-AXIAL PISTON
ROTATING GP-PUMP
4T-5567 ROTATING GP-PUMP
VALVE GP-SHUTTLE
3G-3253 VALVE GP-SHUTTLE

Truck sale:

Caterpillar 963K, track loaders, Construction
394,800 
Caterpillar 963K, track loaders, Construction
- track loaders
ZIEGLER CAT
Caterpillar 963K, track loaders, Construction
244,373 
Caterpillar 963K, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 963K, track loaders, Construction
386,250 
Caterpillar 963K, track loaders, Construction
- track loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar 963, track loaders, Construction
 
Caterpillar 963, track loaders, Construction
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 963K, track loaders, Construction
148,500 
Caterpillar 963K, track loaders, Construction
- track loaders
ALTORFER INDUSTRIES
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.