8G768 PILOT LINES AND PUMP GROUP SERIAL NO. 6Z833,954,967,977,994,995,1012,1019,1023 TO 1025,1029, 1033 TO 1039,1041,1042,1044 TO 1048,1050,1051,1053 TO 1055,1057,1059, 1061,1062,1064 TO 1079 AND 6Z1081-UP 4T5617 GEAR PUMP PARTS ARE SHOWN ON PAGE 208A 963

HYDRAULIC SYSTEM

PUMP GP

0. 8G-0768 PUMP & LIN
1. 3G-3302 PUMP GP-GE
2. 3G-9669 PUMP GP-GE
3. 4T-5617 PUMP GP-GE
4. 3G-2746 CARTRIDGE
5. 9T-0486 PUMP GP-VA

LINES GP-BUCKET

6. 3V-8705 LINES GP-B

LINES GP-RIPPER

7. 1U-0983 LINES GP-R
8. 3W-2166 LINES GP-R

CONVERSION GP

9. 3W-3927 CONVERSION
0. INFORMATION

TRACK LOADER 963 TRACK LOADER 06Z
963 TRACK LOADER / HIGH DRIVE / 06Z00001-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1338 963 06Z (1981)

HYDRAULIC SYSTEM

PUMP GP

8G-0768 PUMP & LINES GP

#SEBP13380530

8G-0768: PUMP & LINES GP

PUMP & LINES GP

8G768 PILOT LINES AND PUMP GROUP
SERIAL NO. 6Z833,954,967,977,994,995,1012,1019,1023 TO 1025,1029,
1033 TO 1039,1041,1042,1044 TO 1048,1050,1051,1053 TO 1055,1057,1059,
1061,1062,1064 TO 1079 AND 6Z1081-UP 4T5617 GEAR PUMP PARTS ARE SHOWN
ON PAGE 208A

c307683 SEBP1338

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-6806	[6]	CONNECTOR
2.	3J-1907 C	[16]	SEAL
3.	8M-0505	[5]	CONNECTOR
4.	3K-0360 C	[4]	SEAL-O-RING
5.	030-8194	[1]	CONNECTOR-FLARED
	2M-9780	[1]	SEAL-O-RING
6.	4T-5617 CY	[1]	PUMP GP-GEAR
7.	2R-6276	[2]	CONNECTOR
	3D-2824	[2]	SEAL-O-RING
8.	3R-9704	[1]	ELBOW-SWIVEL
9.	9L-5619	[1]	ADAPTER
	8G-0774	[1]	GASKET
10.	5F-3106	[1]	SEAL-O-RING
11.	0S-1566	[2]	BOLT
	5P-8247	[2]	WASHER-HARD
12.	0S-0699	[2]	STUD
	5M-2894	[2]	WASHER
13.	1D-4717	[5]	NUT
14.	6V-3965	[1]	NIPPLE AS
	6V-0852	[1]	CAP-DUST
15.	8G-2758	[1]	HOSE AS 284CM(111.9 IN.)
16.	8G-7853	[1]	HOSE AS 223CM(87.8 IN.)
17.	030-7947	[8]	ELBOW
18.	7K-1181	[16]	STRAP-CABLE
19.	8G-1317	[1]	HOSE AS 332CM(130.7 IN.)
20.	8G-1316	[2]	HOSE AS 338CM(133.1 IN.)
21.	8G-1315	[2]	HOSE AS 270CM(106.3 IN.)
22.	030-7943	[1]	ELBOW
23.	8G-1318	[1]	HOSE AS 353CM(139 IN.)
24.	5P-7854	[1]	CLIP
25.	8G-1651	[1]	HOSE AS 226CM(89 IN.)
26.	5P-4325	[4]	CLIP
27.	3R-4792	[3]	ROD
28.	5P-1075	[3]	WASHER-HARD
29.	005-4362	[1]	ELBOW
30.	1U-3175	[1]	TUBE AS
31.	3V-4791	[1]	GROMMET
32.	8M-2773	[1]	CLIP
33.	8G-1588	[1]	HOSE AS 330CM(129.9 IN.)
34.	030-7948 C	[1]	ELBOW
35.	030-8276	[1]	ELBOW-FLARED
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP13380531

3G-3302: PUMP GP-GEAR

PUMP GP-GEAR

3G3302 HYDRAULIC GEAR PUMP GROUP

c310445 SEBP1338

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7J-4772	[1]	COUPLING
	5S-1522	[1]	RING
2.	1U-3414	[8]	ROD
	8H-5724	[8]	NUT
	6J-2391	[8]	WASHER
3.	3J-1907	[8]	RING
4.	6V-1899 C	[2]	SEAL
5.	3G-7242	[1]	PLUG
6.	3G-1280	[1]	SPACER
			THE FOLLOWING REPAIR KITS ARE AVAILABLE:
	3G-5984	[1]	KIT (Seal)
	1U-3412	[1]	SECTION KIT (front)
	1U-3413	[1]	SECTION KIT (rear)
	C		INDICATES CHANGE

#SEBP13380532

3G-9669: PUMP GP-GEAR

PUMP GP-GEAR

3G9669 GEAR PUMP GROUP
SERIAL NO. 6Z1 TO 832,834 TO 953,956 TO 1011,1013 TO 1018,1020 TO 1022,
1026 TO 1028,1030 TO 1032,1040,1043,1049,105I,1056,1058,1060,1063,
AND 6Z1080 INCLUSIVE PART OF 8G768 PILOT LINES & PUMP GROUP SHOWN
ON PAGE 207

c304793 SEBP1338

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5H-9899	[1]	RING
2.	1U-3875	[1]	COUPLING
3.	6V-3365	[2]	SEAL
4.	1U-3130 C	[1]	PLUG
5.	3F-8156	[4]	BOLT
			THE FOLLOWING REPAIR KITS ARE AVAILABLE:
	1U-3876	[1]	SEAL KIT
			(Includes ring and seals)
	4T-1054	[1]	VALVE KIT (relief)
	C		INDICATES CHANGE

#SEBP13380533

4T-5617: PUMP GP-GEAR

PUMP GP-GEAR

4T5617 GEAR PUMP GROUP
SERIAL NO. 6Z833,954,967,977,994,995,1012,1019,1023,1024,1025,1029,1033
TO 1039,1041,1042,1044 TO 1048,1050,1051,1053 TO 1055,1057,1059,1061,
1062,1064 TO 1079 AND 6Z1081-UP. PART OF 8G768 PILOT LINES AND PUMP
GROUP SHOWN ON PAGE 207B

c307702 SEBP1338

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5H-9899	[1]	RING-RETAINING
2.	1U-3875	[1]	COUPLING-SPLINE
3.	6V-3365	[2]	SEAL-LIP TYPE
4.	1U-3130	[1]	PLUG
5.	3F-8156	[4]	BOLT-SOCKET HEAD

			THE FOLLOWING REPAIR
			KITS ARE AVAILABLE:
	1U-3876	[1]	KIT-SEAL (INCL RINGS AND SEALS)
	4T-1054	[1]	KIT-RELIEF VALVE

#SEBP13380534

3G-2746: CARTRIDGE GP

CARTRIDGE GP

3G2746 CARTRIDGE GP*R
PART OF 9T0486 PUMP

c214698 SEBP1338

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3G-1264	[4]	RETAINER
2.	3G-1265	[4]	SEAL
3.	2J-8163	[1]	SEAL
4.	3G-1820	[1]	SEAL
5.	4J-9225	[1]	RING
6.	1H-5728	[1]	SEAL

#SEBP13380535

9T-0486: PUMP GP-VANE

PUMP GP-VANE

9T0486 PUMP GP-VANE
S/N 6Z1520-UP
3G2746-PAGE 208B

c337912 SEBP1338

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3D-6156	[1]	COVER
2.	3G-2746 RY	[1]	CARTRIDGE GP.
3.	3G-7242	[1]	PLUG
4.	9T-1340	[1]	SHAFT
5.	1A-5405	[4]	BOLT
6.	1U-3937	[1]	BODY
7.	2J-8172	[1]	RING
8.	4M-5285	[1]	RING
9.	2L-5271	[1]	BEARING
10.	2J-8168	[1]	WASHER
11.	3G-9194	[1]	SEAL
12.	9J-7814	[1]	SEAL
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP13380536

3V-8705: LINES GP-BUCKET

LINES GP-BUCKET

3V8705 MULTI-PURPOSE BUCKET LINES GROUP
PART OF 3V8710 MULTI-PURPOSE BUCKET ARRANGEMENT LISTED ON PAGE 219.
AN ATTACHMENT

c233644 SEBP1338

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9K-8778	[1]	PLATE
2.	0S-1619	[4]	BOLT
3.	1D-4717	[6]	NUT
4.	5M-2894	[8]	WASHER
5.	9K-8776	[2]	CLAMP
6.	2H-3855	[10]	BOLT
	5P-1076	[10]	WASHER
7.	4V-4962	[1]	PLATE
8.	4V-4959	[2]	MANIFOLD
9.	9S-4183	[2]	PLUG
10.	4V-4961	[1]	PLATE
11.	4V-4910	[2]	HOSE ASSEM.
			(Each Includes)
	9S-0671 H		HOSE 45.55 in.(115.7 cm)
12.	8S-4064	[1]	COUPLING ASSEM. (straight)
13.	3S-8606	[2]	SLEEVE
14.	1P-4899	[1]	COUPLING ASSEM. (90 degrees)
15.	9K-8779	[1]	PLATE
16.	4B-3388	[16]	BOLT
	3B-4505	[16]	LOCKWASHER
17.	9K-8773	[4]	TUBE ASSEM.
	5J-1583	[4]	SEAL
18.	9K-8774	[2]	HOSE ASSEM.
			(Each Includes)
	9S-0671 H		HOSE 26.37 in.(67 cm)
19.	1P-4899	[1]	COUPLING ASSEM. (90 degrees)
20.	3S-8606	[2]	SLEEVE
21.	8S-4064	[1]	COUPLING ASSEM. (straight)
22.	030-8190	[4]	CONNECTOR
23.	4V-4911	[2]	HOSE ASSEM.
			(Each Includes)
	9S-0247 H		HOSE 35.03 in.(89 cm)
24.	9S-9724	[1]	COUPLING ASSEM. (60 degrees)
25.	3S-7166	[2]	SLEEVE
26.	8S-3759	[1]	COUPLING ASSEM. (straight)
27.	8D-3127	[2]	CLIP
28.	0S-1594	[4]	BOLT
	3B-4506	[4]	LOCKWASHER
29.	5B-9603	[2]	BOLT
30.	2R-6276	[2]	CONNECTOR
	H		ORDER BY THE INCH

#SEBP13380537

1U-0983: LINES GP-RIPPER

LINES GP-RIPPER

1U983 RIPPER LINES GROUP
PART OF 3G2169 RIPPER ARRANGEMENT LISTED ON PAGE 223. AN ATTACHMENT

c308219 SEBP1338

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6D-4246	[2]	CLIP
	6K-4936	[2]	BOLT
	5M-2894	[2]	WASHER
2.	1U-0984	[2]	TUBE ASSEM.
3.	3R-9704 C	[2]	ELBOW
4.	1U-4120	[2]	HOSE ASSEM.
			(EACH INCLUDES)
	9S-0247 CG		HOSE 31.11in.(79cm)
	6V-0745 CE		GUARD 70cm(27.56in.)
5.	8S-3759 C	[2]	COUPLING ASSEM.
6.	3S-7166	[2]	SLEEVE
7.	068-4174 C	[4]	ELBOW
8.	2M-9780	[4]	SEAL
9.	1U-4121	[2]	HOSE ASSEM.
			(EACH INCLUDES)
	9S-0247 CG		HOSE 43.30in.(110in.)
	6V-0745 CE		GUARD 101cm(39.76in.)
10.	8S-3759 C	[2]	COUPLING ASSEM.
11.	3S-7166	[2]	SLEEVE
	C		INDICATES CHANGE
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH

#SEBP13380538

3W-2166: LINES GP-RIPPER

LINES GP-RIPPER

3W2166 RIPPER LINES GROUP
AN ATTACHMENT

c340472 SEBP1338

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3W-3117	[2]	HOSE AS
2.	3W-2169	[2]	HOSE AS
3.	3W-2172	[1]	CLAMP AS
4.	5P-8091	[4]	BOLT-SELF LOCKING
5.	1K-0505	[4]	WASHER
6.	068-4174	[4]	ELBOW
7.	2M-9780	[4]	SEAL-O-RING
8.	6K-4936	[2]	BOLT-SELF LOCKING
9.	5M-2894	[2]	WASHER
10.	6D-4246	[2]	CLIP
11.	3W-2167	[1]	TUBE AS
12.	3W-2175	[1]	CLAMP AS
13.	3W-2168	[1]	TUBE AS

#SEBP13380539

3W-3927: CONVERSION AR

CONVERSION AR

3W3927 CONVERSION AR-DUAL SETTING TILT
RELIEF FIELD INSTALLATION

SEBP13380539 SEBP1338

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name


9T-0469 Y	[1]	VALVE GP-CHECK & RELIEF
3W-1081	[1]	H0SE ASSEMBLY
8G-6874	[1]	HOSE ASSEMBLY
8G-2541	[1]	HOSE ASSEMBLY
2G-4611	[1]	HOSE ASSEMBLY
030-7950	[1]	ELBOW
3D-2824	[2]	SEAL
030-7946	[1]	ELBOW
3J-7354	[2]	SEAL
8M-0745	[1]	REDUCER
8M-0744	[1]	NUT
033-8188	[1]	HOSE ASSEMBLY
3J-7352	[1]	CONNECTOR
4T-6069	[1]	BODY
030-7942	[1]	ELBOW
3J-1907	[3]	SEAL
3W-1181	[1]	HOSE ASSEMBLY
8M-0547	[1]	ELBOW
061-7539	[1]	SEAL
9J-6367	[1]	RING
6V-5142	[1]	SEAL
3K-0360	[1]	SEAL
4T-4073	[1]	VALVE ASSEMBLY
4B-9782	[1]	BALL
8J-2415	[2]	WASHER
8L-2777	[1]	SEAL
030-0167	[2]	RING
2P-1297	[1]	TEE
6M-6853	[1]	TEE
6K-9194	[1]	ELBOW
1P-3704	[2]	SEAL
2R-6806	[1]	CONNECTOR
033-6039	[1]	SEAL
4J-0522	[2]	SEAL
3H-5368	[4]	BOLT
5P-8244	[8]	WASHER
0T-0772	[4]	BOLT
4T-6985	[1]	PLUG
Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

PUMP GP

Special Instruction

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}

Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}

Service Letter-NACD

Certain 0R1722 Remanufactured Hydraulic Pump Barrel Assemblies Need To Be Removed From Parts Stock
Certain 0R1722 Remanufactured Hydraulic Pump Barrel Assemblies Need To Be Removed From Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Specifications

1U390 Hydraulic Pump (Transmission Serial No. 4TA1 Thru 4TA325)
963 TRACK-TYPE LOADER

3G2185 Hydraulic Pump (Transmission Serial No. 4TA326-Up)
963 TRACK-TYPE LOADER

Hydraulic Pumps (9J4833 and 9J4834)
963 TRACK-TYPE LOADER

Hydraulic Pump For Pilot Oil System (3G9669)
963 TRACK-TYPE LOADER

Hydraulic Pump For Main Oil System (3G3302)
963 TRACK-TYPE LOADER

Main Relief Valve For Large Section Of Main Hydraulic Pump (9J4843)
963 TRACK-TYPE LOADER

Relief Valve For Small Section Of Main Hydraulic Pump (8J5452)
963 TRACK-TYPE LOADER

Relief Valve For Pilot Pump
963 TRACK-TYPE LOADER

Tool Operating Manual

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Service Letter-China

Certain 0R1722 Remanufactured Hydraulic Pump Barrel Assemblies Need To Be Removed From Parts Stock
Certain 0R1722 Remanufactured Hydraulic Pump Barrel Assemblies Need To Be Removed From Parts Stock

Service Letter-Asia

Reuse And Salvage Guidelines

Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}

Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}

Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}

Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}

Service Letter-APD

Certain 0R1722 Remanufactured Hydraulic Pump Barrel Assemblies Need To Be Removed From Parts Stock
Certain 0R1722 Remanufactured Hydraulic Pump Barrel Assemblies Need To Be Removed From Parts Stock

Bench Test Procedures

Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}

Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}

Disassembly and Assembly

Hydraulic Pump Gear Train
963 TRACK-TYPE LOADER

Pump (Pilot)
963 TRACK-TYPE LOADER

Hydraulic Pump
963 TRACK-TYPE LOADER

Service Magazine

Larger Diameter Hose Assembly Used In Pilot Lines And Pump Group{5057,5073}
1982/03/22

New Drain Line Added To Pilot Valve In Pilot Lines And Pump Group{5057,5059}
1982/04/26

New Axial Piston Pump Groups Have Better Lubrication Between Piston Assemblies And Barrel Assembly{3203}
1983/09/12

New Pilot Pump Has Improved Relief Valve {5073}
1984/01/16

Rubber Plug Now Used In Drain Hole In Hydraulic Pumps With Double Seals{5055,5073}
1984/01/23

Improved Hydraulic Pump Lines Groups{5057}
1984/09/17

Serviceable Piece Parts And Service Tools Are Available For Tyrone TP20 Series Tandem Gear Pumps{5073,0600}
1984/10/22

Identification Grooves Used On Slippers For Pistons In Hydraulic Pumps And Motors{5070,5058}
1984/11/26

Axial Piston Pumps Now Use Former Port Plate {3203}
1985/01/14

New Main Control Valve Keeps Bucket In Dump Position When Backdragging; New Single-Section Hydraulic Pump Used{5117,5104,6100,5076,5055}
1985/07/15

Identify And Correct Leakage From The Hydraulic Pump Weep Hole{1206,1207,5084}
1985/09/23

New Hydraulic Pump Has Bleed Valve To Remove Air In Pump{5055}
1987/07/06

New Barrel Assembly Used In Hydrostatic Piston Link Motor Groups{3201}
1988/02/22

Different Auxiliary Valve Required If Loader Has Single-Section Hydraulic Pump {5050,5054}
1988/05/09

Retraction Plate That Has Greater Wear Resistance Is Available For Parts Service For Piston Pumps {3200}
1988/08/29

New Fuel Setting Specification And Hydraulic Pump Ring Can Improve Performance{1250,1257,5055}
1990/03/12

New Barrel Assembly And Undercut Port Plate Used In Piston Track Motor Groups{3203,5070}
1990/03/12

New Barrel Assembly And Undercut Port Plate Used In Piston Pump Rotating Groups Of Hydrostatic Transmission {3203,5070}
1990/03/26

Remanufactured Caterpillar Piston Pump And Motor Barrels Available{5070,3208,4351,5058}
1990/12/17

New Hydraulic Pump Groups Help Prevent Oil Leaking From Weep Hole{5055}
1991/01/14

New 6E3367 Barrel Assembly With Harder Splines Available For Axial Piston Pumps{5070,3203}
1992/01/20

Additional Seals In New Hydraulic Pump Groups Prevent Leakage{5073,3204,4268,4306,5084,5085,5164}
1992/10/05

Lighter, More Efficient Piston Assembly Available{5070}
1995/03/27

Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}
2004/07/05

Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog 963 :

8G-0768 PUMP & LINES GP

5D-1910 COVER GP-PROTECTION

3W-3195 LINES GP-PUMP

8G-1647 LINES GP-PUMP

3V-8705 LINES GP-BUCKET

1U-0983 LINES GP-RIPPER

3W-2166 LINES GP-RIPPER

Truck sale:

394,800

Caterpillar 963K, track loaders, Construction
- track loaders
ZIEGLER CAT

244,373

Caterpillar 963K, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.

386,250

Caterpillar 963K, track loaders, Construction
- track loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC

Caterpillar 963, track loaders, Construction
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI

148,500

Caterpillar 963K, track loaders, Construction
- track loaders
ALTORFER INDUSTRIES