OPERATOR STATION
CONTROL GP-HYDRAULICCONTROL GP-STEERING
CONTROL GP-TRANSMISSION
CONVERSION GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP13420600
2V-5727: CONTROL GP-HYDRAULIC HAND
For full view, you need register
Parts for your 815B SOIL COMPACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1H-8296 | [4] | SCREW-MACHINE (3/8-16X0.52-IN) | |
| 2. | 6P-5208 | [1] | GUIDE-CONTROL | |
| 3. | 4V-1037 | [1] | LEVER AS | |
| 4. | 6B-4196 | [1] | WASHER-THRUST (16.25X26.97X2.36-MM THK) | |
| 5. | 6P-0593 | [2] | BEARING-ROLLER | |
| 6. | 2V-7859 | [2] | BEARING | |
| 7. | 4V-3427 | [1] | COLLAR-SET | |
| 8. | 4B-3566 | [1] | SETSCREW-SQUARE HEAD (1/2-20X0.5-IN) | |
| 9. | 5V-1689 | [1] | KNOB-BLADE LIFT | |
| 10. | 6V-8185 | [1] | NUT (1/4-20-THD) | |
| 11. | 4V-1033 | [1] | PLATE | |
| 12. | 4H-3521 | [1] | SPRING | |
| 14. | 5V-0509 | [1] | SEAL-DOMED | |
| 15. | 8R-5272 | [1] | SPRING | |
| 16. | 6P-5209 | [1] | COVER | |
| 17. | 4V-1248 | [1] | BRACKET AS | |
| 18. | 9J-5846 | [1] | ROLLER-CAM | |
| 19. | 5S-7379 | [3] | BOLT (3/8-16X0.875-IN) | |
| 20. | 5P-1075 | [7] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 21. | 4V-1344 | [1] | SHEET AS | |
| 22. | 7F-3531 | [1] | BOLT (1/4-28X1.25-IN) | |
| 23. | 2L-9038 | [2] | LOCKNUT (1/4-28-THD) | |
| 24. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 25. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 26. | 6P-0205 | [1] | SPACER (0.269X0.405X0.656-IN THK) | |
| 27. | 4V-1029 | [1] | SPACER (6.5X16.75X4.25-MM THK) | |
| 5P-0537 F | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 031-0215 F | [1] | BOLT-LOCKING (1/4-20X0.625-IN) | ||
| F | NOT SHOWN | |||
#SEBP13420601
7V-8707: CONTROL GP-HYDRAULIC HAND
7V-8707 CONTROL GP-HYDRAULIC HAND
S/N 17Z1-UP
PART OF 5V-1423 HYDRAULIC AR
Type 1
S/N 17Z1-UP
PART OF 5V-1423 HYDRAULIC AR
Type 1
For full view, you need register
Parts for your 815B SOIL COMPACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-1023 | [1] | SHAFT AS | |
| 2. | 4V-1025 | [1] | BRACKET AS | |
| 3. | 4V-3427 | [1] | COLLAR-SET | |
| 4. | 2V-7859 | [3] | BEARING | |
| 5. | 4B-3566 | [1] | SETSCREW-SQUARE HEAD (1/2-20X0.5-IN) | |
| 6. | 6P-0593 | [4] | BEARING-ROLLER (NEEDLE) | |
| 7. | 6B-4196 | [1] | WASHER-THRUST (16.25X26.97X2.36-MM THK) | |
| 8. | 5V-1681 | [1] | KNOB-LIFT & TILT | |
| 9. | 5P-9083 | [1] | ROD END | |
| 10. | 2F-8616 C | [1] | NUT-SELF LOCKING (3/8-24-THD) | |
| 11. | 5S-9607 C | [2] | LOCKNUT | |
| 12. | 7T-1971 C | [1] | CABLE AS | |
| 13. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 14. | 4K-6177 | [1] | CLIP | |
| 15. | 6V-3338 | [1] | END-YOKE ROD | |
| 16. | 7B-7210 | [3] | PIN | |
| 3B-4610 | [3] | PIN-COTTER | ||
| 17. | 7V-8523 | [2] | BELLCRANK | |
| 18. | 7V-8526 | [1] | ROD-CONTROL | |
| 19. | 7V-8521 | [1] | SPACER | |
| 20. | 6V-9264 CBD | SEAL | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
#SEBP13420602
7V-8707: CONTROL GP-HYDRAULIC HAND
7V-8707 CONTROL GP-HYDRAULIC HAND
S/N 17Z1-UP
PART OF 5V-1423 HYDRAULIC AR
Type 2
S/N 17Z1-UP
PART OF 5V-1423 HYDRAULIC AR
Type 2
For full view, you need register
Parts for your 815B SOIL COMPACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-4449 C | [1] | LEVER AS | |
| 8H-3128 | BOLT-SOCKET HEAD (1/4-20X0.625-IN) | |||
| 2. | 4V-1025 | [1] | BRACKET AS | |
| 3. | 4V-3427 | [1] | COLLAR-SET | |
| 4. | 2V-7859 | [3] | BEARING | |
| 5. | 4B-3566 | [1] | SETSCREW-SQUARE HEAD (1/2-20X0.5-IN) | |
| 6. | 6P-0593 C | [2] | BEARING-ROLLER (NEEDLE) | |
| 7. | 6B-4196 | [1] | WASHER-THRUST (16.25X26.97X2.36-MM THK) | |
| 8. | 5V-1681 | [1] | KNOB-LIFT & TILT | |
| 9. | 5P-9083 | [1] | ROD END | |
| 10. | 2F-8616 | [1] | NUT-SELF LOCKING (3/8-24-THD) | |
| 11. | 5S-9607 | [2] | LOCKNUT | |
| 12. | 7T-1971 | [1] | CABLE AS | |
| 13. | 5S-7379 C | [1] | BOLT (3/8-16X0.875-IN) | |
| 8T-4896 C | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 14. | 4K-6177 | [1] | CLIP | |
| 15. | 6V-3338 | [1] | END-YOKE ROD | |
| 16. | 7B-7210 | [3] | PIN | |
| 3B-4610 | [3] | PIN-COTTER | ||
| 17. | 7V-8523 | [2] | BELLCRANK | |
| 18. | 7V-8526 | [1] | ROD-CONTROL | |
| 19. | 7V-8521 | [1] | SPACER | |
| 20. | 6V-9264 BD | SEAL | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
#SEBP13420603
2V-4283: CONTROL GP-STEERING
For full view, you need register
Parts for your 815B SOIL COMPACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1V-6282 | [1] | SPINNER AS | |
| 2. | 1V-9385 | [1] | COVER-EMBLEM | |
| 3. | 9K-5635 | [3] | SCREW-TAPPING (8-18X1-IN) | |
| 4. | 032-5678 | [1] | STEERING WHEEL | |
| 5. | 6K-8162 | [1] | RING-RETAINING | |
| 6. | 6K-8161 | [1] | BALL BEARING | |
| 7. | 5H-6480 | [1] | RING-RETAINING | |
| 8. | 2V-7990 | [1] | TUBE AS | |
| 9. | 0S-1571 | [4] | BOLT (3/8-16X1.75-IN) | |
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 10. | 3G-7387 CY | [1] | PUMP GP-METERING (HMU) | |
| 11. | 9S-1354 | [1] | NUT (5/8-18-THD) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 4B-4281 | [1] | WASHER (16.8X33X2.5-MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13420604
2V-4283: CONTROL GP-STEERING
For full view, you need register
Parts for your 815B SOIL COMPACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1V-6282 | [1] | SPINNER AS | |
| 2. | 1V-9385 | [1] | COVER-EMBLEM | |
| 3. | 9K-5635 | [3] | SCREW-TAPPING (8-18X1-IN) | |
| 4. | 032-5678 | [1] | STEERING WHEEL | |
| 5. | 6K-8162 | [1] | RING-RETAINING | |
| 6. | 6K-8161 | [1] | BALL BEARING | |
| 7. | 5H-6480 | [1] | RING-RETAINING | |
| 8. | 2V-7990 | [1] | TUBE AS | |
| 9. | 5S-7383 C | [4] | BOLT (3/8-16X1.75-IN) | |
| 8T-4896 C | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 10. | 4T-7387 CY | [1] | PUMP GP-METERING (HMU) | |
| 11. | 9S-1354 | [1] | NUT (5/8-18-THD) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 4B-4281 | [1] | WASHER (16.8X33X2.5-MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13420605
2V-4283: CONTROL GP-STEERING
For full view, you need register
Parts for your 815B SOIL COMPACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1V-6282 | [1] | SPINNER AS | |
| 2. | 1V-9385 | [1] | COVER-EMBLEM | |
| 3. | 9K-5635 | [3] | SCREW-TAPPING (8-18X1-IN) | |
| 4. | 032-5678 | [1] | STEERING WHEEL | |
| 5. | 6K-8162 | [1] | RING-RETAINING | |
| 6. | 6K-8161 | [1] | BALL BEARING | |
| 7. | 5H-6480 | [1] | RING-RETAINING | |
| 8. | 2V-7990 | [1] | TUBE AS | |
| 9. | 5S-7383 | [4] | BOLT (3/8-16X1.75-IN) | |
| 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 10. | 6E-6406 CY | [1] | PUMP GP-METERING (HMU) | |
| 11. | 9S-1354 | [1] | NUT (5/8-18-THD) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 4B-4281 | [1] | WASHER (16.8X33X2.5-MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13420606
2V-4282: CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 815B SOIL COMPACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3V-0530 | [1] | LEVER AS (TRANSMISSION) | |
| 2. | 1V-5326 | [2] | BEARING | |
| 3. | 2M-2489 | [1] | SEAL-LIP TYPE | |
| 4. | 5S-7046 | [1] | RING-RETAINING | |
| 5. | 1V-9809 | [1] | RETAINER | |
| 6. | 1V-6346 | [1] | COLLAR-INDICATOR | |
| 7. | 4V-2518 | [1] | SHAFT (16 TEETH) | |
| 8. | 3K-1644 | [1] | SCREW (5/16-18X2.75-IN) | |
| 9. | 6K-5177 | [1] | HANDLE-SHIFT | |
| 10. | 5B-9324 | [1] | SETSCREW | |
| 11. | 9K-6605 | [1] | SPACER | |
| 12. | 3V-6905 | [1] | PIN | |
| 13. | 010-2571 | [6] | SETSCREW-SOCKET (1/4-20X0.31-IN) | |
| 14. | 1V-6342 | [1] | GEAR AS (12 TEETH) | |
| 1V-5326 | [1] | BEARING | ||
| 15. | 3V-6904 B | [5] | WASHER | |
| 16. | 4V-3693 | [1] | PIN | |
| 17. | 4V-3680 | [1] | BELLCRANK | |
| 18. | 2V-7894 | [1] | RACK | |
| 19. | 9L-2685 | [2] | BALL JOINT AS | |
| B | USE AS REQUIRED | |||
#SEBP13420607
2V-4282: CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 815B SOIL COMPACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-3456 C | [1] | LEVER AS (TRANSMISSION) | |
| 2. | 1V-5326 | [2] | BEARING | |
| 3. | 2M-2489 | [1] | SEAL-LIP TYPE | |
| 4. | 5S-7046 | [1] | RING-RETAINING | |
| 5. | 1V-9809 | [1] | RETAINER | |
| 6. | 1V-6346 | [1] | COLLAR-INDICATOR | |
| 7. | 4V-2518 | [1] | SHAFT | |
| 8. | 3K-1644 | [1] | SCREW (5/16-18X2.75-IN) | |
| 9. | 6K-5177 | [1] | HANDLE-SHIFT | |
| 10. | 8T-5069 C | [1] | SETSCREW-SOCKET (10-24X0.25-IN) | |
| 11. | 9K-6605 | [1] | SPACER | |
| 12. | 3V-6905 | [1] | PIN | |
| 13. | 010-2571 | [6] | SETSCREW-SOCKET (1/4-20X0.31-IN) | |
| 14. | 1V-6342 | [1] | GEAR AS (12 TEETH) | |
| 1V-5326 | [1] | BEARING | ||
| 15. | 3V-6904 CB | [4] | WASHER (THICK) | |
| 16. | 4V-3693 | [1] | PIN | |
| 17. | 4V-3680 | [1] | BELLCRANK | |
| 18. | 8R-7075 | [1] | RACK | |
| 19. | 8S-7048 | [2] | ROD END | |
| 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 20. | 7X-0562 | [1] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 21. | 6W-5796 C | [1] | ADAPTER | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP13420608
2V-4282: CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 815B SOIL COMPACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-3456 | [1] | LEVER AS (TRANSMISSION) | |
| 2. | 1V-5326 | [2] | BEARING | |
| 3. | 2M-2489 | [1] | SEAL-LIP TYPE | |
| 4. | 5S-7046 | [1] | RING-RETAINING | |
| 5. | 1V-9809 | [1] | RETAINER | |
| 6. | 1V-6346 | [1] | COLLAR-INDICATOR | |
| 7. | 4V-2518 | [1] | SHAFT | |
| 8. | 3K-1644 | [1] | SCREW (5/16-18X2.75-IN) | |
| 9. | 6K-5177 | [1] | HANDLE-SHIFT | |
| 10. | 8T-5069 | [1] | SETSCREW-SOCKET (10-24X0.25-IN) | |
| 11. | 9K-6605 | [1] | SPACER | |
| 12. | 3V-6905 | [1] | PIN | |
| 13. | 010-2571 | [6] | SETSCREW-SOCKET (1/4-20X0.31-IN) | |
| 14. | 1V-6342 | [1] | GEAR AS (12 TEETH) | |
| 1V-5326 | [1] | BEARING | ||
| 15. | 3V-6904 CB | [9] | WASHER (THICK) | |
| 16. | 100-3671 C | [1] | PIN | |
| 17. | 100-3673 C | [1] | BELLCRANK AS | |
| 100-3675 | [1] | BEARING | ||
| 18. | 100-3704 C | [1] | RACK | |
| 19. | 8S-7048 | [2] | ROD END | |
| 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 20. | 7X-0562 B | [1] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP13420609
107-2062: CONVERSION AR-NON-ROPS
107-2062 CONVERSION AR-NON-ROPS
S/N 17Z1464-UP
S/N 17Z1464-UP
For full view, you need register
Parts for your 815B SOIL COMPACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9K-1376 | [2] | ANGLE | ||
| 8V-9755 | [4] | BLOCK | ||
| 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | ||
| 8T-9377 | [8] | BOLT (3/8-16X2.25-IN) | ||
| 4L-9337 | [4] | BOLT (3/8-16X1.5-IN) | ||
| 7V-8366 | [1] | PLATE AS | ||
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 7V-8367 | [1] | PLATE AS | ||
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 8T-4896 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) |
Information:
Caterpillar Parts SIS Catalog 815B :
Truck sale:
50,000 USD
