AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7V2889 PUMP GP-MOUNTING S/N 94X3874-UP 4T6847-PAGE 216.01 966D WHEEL LOADER


HYDRAULIC SYSTEM
PUMP GP
LINES GP-HYDRAULIC
LINES GP-PILOT

WHEEL LOADER 966D WHEEL LOADER 94X
 966D WHEEL LOADER 94X00001-06488 (MACHINE) POWERED BY 3306 ENGINE SEBP1355 966D 94X   (1981)

HYDRAULIC SYSTEM

PUMP GP
PUMP & MOUNTING GP
7V-2889 PUMP & MOUNTING GP
PUMP & MOUNTING GP
7V-2889 PUMP & MOUNTING GP
PUMP GP-VANE
1U-2220 PUMP GP-VANE
PUMP GP-VANE
4T-6847 PUMP GP-VANE
CARTRIDGE GP-REAR
1U-2667 CARTRIDGE GP-REAR
CARTRIDGE GP
4T-0422 CARTRIDGE GP
 

#SEBP13550670
 

7V-2889: PUMP & MOUNTING GP

7V2889 PUMP GP-MOUNTING
S/N 94X3874-UP
4T6847-PAGE 216.01
c521962 SEBP1355
7V2889 PUMP & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 966D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6847 CY [1] PUMP GP-VANE  
2. 5F-3999 [1] SEAL-O-RING  
3. 7X-0345 [2] BOLT (5/8-11X1.75IN)  
4. 8T-4122 [2] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13550671
 

1U-2220: PUMP GP-VANE

1U2220 PUMP GP-HYDRAULIC-VANE
S/N 94X1-3873
4T0422 & 1U2667-PAGE 217
PART OF 7V2889 PUMP MOUNTING
c231788 SEBP1355
1U2220 PUMP GP-VANE Parts scheme
  For full view, you need register

Parts for your 966D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2816 [1] SPRING  
2. 1U-3508 [1] PLATE  
3. 1U-3509 [1] ROTOR  
4. 1U-3513 [1] ADAPTER  
5. 009-2062 [2] SEAL  
6. 1J-6474 [1] RING  
7. 3J-7719 [1] RING  
8. 3L-1425 [1] BEARING  
9. 2J-7763 [1] WASHER  
10. 5P-0904 [1] SEAL  
11. 6V-2318 [1] SEAL  
12. 1U-3516 [1] SHAFT  
13. 065-3550 [1] SPRING  
14. 9S-4187 [2] PLUG  
  3K-0360 [2] SEAL  
15. 3J-6008 [1] RING  
16. 1U-3512 [1] VALVE  
17. 1U-3510 [1] BODY  
18. 3G-7242 [1] PLUG  
19. 4T-0422 RY [1] CARTRIDGE GRP 189 L/M (50 GPM)  
    (Separate Illustration)
20. 1U-3511 [1] COVER GROUP  
    (Includes)
  7J-8080 [8] DAMPER  
21. 1U-2667 RY [1] CARTRIDGE GRP 114 L/M(30 GPM)  
    (Separate Illustration)
22. 1U-3517 [1] COVER  
  4J-7945 [4] BOLT  
23. 1U-3867 [2] PIN  
24. 1U-3514 [1] RING  
25. 6D-7889 [1] SEAL  
26. 1U-3515 [1] COVER  
  0L-1352 [4] BOLT  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  1U-0381 [1] KIT (Flex Plate Front)  
  1U-0380 [1] KIT (Flex Plate-Center)  
  1U-3505 [1] KIT (Cartridge-Rear)  
  1U-3506 [1] KIT (Seal-Rear)  
  1U-3507 [1] KIT (Vane Rear)  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13550672
 

4T-6847: PUMP GP-VANE

4T6847 PUMP GP-VANE
S/N 94X3874-UP
4T0422, 1U2667-PAGE 217
PART OF 7V2889 PUMP
c330919 SEBP1355
4T6847 PUMP GP-VANE Parts scheme
  For full view, you need register

Parts for your 966D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2816 [1] SPRING  
2. 1U-3508 [1] PLATE  
3. 1U-3509 [1] ROTOR  
4. 1U-3513 [1] ADAPTER  
5. 009-2062 [2] SEAL-O-RING  
6. 1J-6474 [1] RING-RETAINING  
7. 3J-7719 [1] RING-RETAINING  
8. 3L-1425 [1] BALL BEARING  
9. 2J-7763 [1] WASHER  
10. 5P-0904 [1] SEAL-LIP TYPE  
11. 6V-2318 [1] SEAL-LIP TYPE  
12. 1U-3516 [1] SHAFT  
13. 065-3550 [1] SPRING-VALVE  
14. 9S-4187 [2] PLUG-O-RING  
  3K-0360 [2] SEAL-O-RING  
15. 3J-6008 [1] RING-SNAP  
16. 4T-9359 [1] VALVE  
17. 1U-3510 [1] BODY  
18. 3G-7242 [1] PLUG  
19. 4T-0422 RY [1] CARTRIDGE GP 189L/M(50GPM)  
20. 1U-3511 [1] COVER GP  
  7J-8080 [8] DAMPER-BOLT  
21. 1U-2667 RY [1] CARTRIDGE GP 114L/M(30GPM)  
22. 1U-3517 [1] COVER  
  4J-7945 [4] BOLT  
23. 1U-3867 [2] PIN  
24. 1U-3514 [1] RING  
25. 6D-7889 [1] SEAL-O-RING  
26. 1U-3515 [1] COVER  
  0L-1352 [4] BOLT  
27. 4T-9358 [1] SCREEN  
   
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE:
  1U-0381 [1] KIT-FLEXPLATE (FRONT)  
  1U-0380 [1] KIT-FLEXPLATE (CENTER)  
  1U-3505 [1] KIT-CARTRIDGE-REAR  
  1U-3506 [1] KIT-REAR SEAL  
  1U-3507 [1] KIT-VANE-REAR  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13550673
 

1U-2667: CARTRIDGE GP-REAR

1U2667 CARTRIDGE GP-REAR*R
114L/MIN. (30 GPM)
PART OF 1U2220 & 4T6847 PUMP
c402162 SEBP1355
1U2667 CARTRIDGE GP-REAR Parts scheme
  For full view, you need register

Parts for your 966D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3079 [4] SEAL-O-RING  
2. 3G-1264 [4] RETAINER-SEAL  
3. 9T-5042 [2] DOWEL  
4. 9T-5049 [1] PLATE-INLET  
5. 9T-5057 [1] KIT-VANE  
6. 9T-5075 [1] RING  
7. 5D-5958 [1] SEAL-O-RING  
8. 061-9457 [1] SEAL-O-RING  
9. 9T-5087 [1] RING  
10. 9T-5093 [1] PLATE-OUTLET  
11. 3G-1820 [1] RING-SEAL  
12. 9T-5100 [2] FLEXPLATE  
13. 9T-5107 [1] ROTOR  
14. 9T-5112 [2] SCREW  
 

#SEBP13550674
 

4T-0422: CARTRIDGE GP

4T0422 CARTRIDGE GP-FRONT*R
189L/MIN. (50 GPM)
PART OF 1U2220 & 4T6847 PUMP
c402062 SEBP1355
4T0422 CARTRIDGE GP Parts scheme
  For full view, you need register

Parts for your 966D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 009-2062 [4] SEAL-O-RING  
2. 3G-2241 [4] RETAINER-SEAL  
3. 9T-5044 [2] DOWEL  
4. 9T-5052 [1] PLATE-INLET  
5. 9T-5058 [1] KIT-VANE  
6. 9T-5080 [1] RING  
7. 6V-1195 [1] SEAL-O-RING  
8. 6V-1179 [1] SEAL-O-RING  
9. 9T-5088 [1] RING  
10. 9T-5095 [1] PLATE-OUTLET  
11. 3G-2242 [1] RING-SEAL  
12. 9T-5102 [2] FLEXPLATE  
13. 9T-5109 [1] ROTOR  
14. 9T-5114 [2] SCREW  
 

#SEBP13550675
 

2V-4248: LINES GP-HYDRAULIC

2V4248 LINES GP-HYDRAULIC
S/N 94X1-2805, 2807, 2809 & 2810
PART 0F 2V4242 HYDRAULIC AR
c709532 SEBP1355
2V4248 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 966D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1135 [4] BOLT (5/8-11X2IN)  
2. 5P-8247 C [4] WASHER-HARD (3.5MM THK)  
3. 4V-8316 [1] ELBOW  
  7S-1156 [1] SEAL-O-RING (113.66MM ID)  
4. 9M-6738 [3] CLAMP-HOSE  
5. 5P-1296 E HOSE 18CM(7IN.)  
6. 4F-7387 [1] SEAL-O-RING (100.97MM ID)  
7. 4V-8318 [1] TUBE AS  
8. 8F-8804 [2] BOLT (1/2-13X5.75IN)  
9. 1A-1460 C [2] BOLT (1/2-13X2IN)  
10. 1P-4579 [8] FLANGE-HALF  
  4J-0524 [4] SEAL-O-RING (47.22MM ID)  
11. 0S-1587 [18] BOLT (1/2-13X1.75IN)  
12. 5P-8245 C [35] WASHER (3MM THK)  
13. 4V-8313 I [1] HOSE AS  
14. 5P-7470 C [1] CLIP (SLOT)  
  5P-7471 C [1] CLIP (TAB)  
  5P-7703 C [1] GROMMET  
15. 0S-1595 C [1] BOLT (1/2-13X1.25IN)  
16. 5V-8898 [1] ELBOW  
17. 8J-5914 [1] PLUG-O-RING (9/16-18 THD)  
18. 2S-4078 [2] SEAL-O-RING (37.46MM ID)  
19. 9S-4191 [1] PLUG-O-RING (9/16-18 THD)  
  3J-1907 [1] SEAL-O-RING (11.89MM ID)  
20. 9S-6130 [1] PLUG-O-RING (1-5/8-12 THD)  
21. 0V-0375 [2] BOLT (1/2-13X3.25IN)  
22. 2B-0947 C [6] BOLT (1/2-13X2.25IN)  
23. 1D-4566 [4] BOLT (1/2-13X3.5IN)  
24. 5V-8897 [1] ELBOW  
25. 1P-3705 [3] SEAL-RECTANGULAR (44.7MM ID)  
26. 4V-8312 I [1] HOSE AS  
27. 0L-2070 C [2] BOLT (3/8-16X2.25IN)  
  5M-2894 [2] WASHER (2.5MM THK)  
  7V-1862 [1] CAP  
28. 4V-8315 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP13550676
 

2V-4248: LINES GP-HYDRAULIC

2V4248 LINES GP-HYDRAULIC
S/N 94X2806, 2808, 2811-5399
PART 0F 2V4242 HYDRAULIC AR
c709565 SEBP1355
2V4248 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 966D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1135 [4] BOLT (5/8-11X2IN)  
2. 5P-8247 C [12] WASHER-HARD (3.5MM THK)  
3. 4V-8316 [1] ELBOW  
  7S-1156 [1] SEAL-O-RING (113.66MM ID)  
4. 5P-1717 C [3] CLAMP-HOSE  
5. 5P-1296 BE HOSE  
6. 4F-7387 [1] SEAL-O-RING (100.97MM ID)  
7. 4V-8318 [1] TUBE AS  
8. 8F-8804 [2] BOLT (1/2-13X5.75IN)  
9. 1A-1460 [2] BOLT (1/2-13X2IN)  
10. 1P-4579 C [4] FLANGE-HALF  
11. 0S-1587 C [10] BOLT (1/2-13X1.75IN)  
12. 5P-8245 C [30] WASHER (3MM THK)  
13. 9V-4467 CI [1] HOSE AS  
14. 9V-4465 C [1] ELBOW  
15. 5P-8077 C [4] FLANGE-HALF  
16. 9V-4466 C [1] ELBOW  
17. 8J-5914 [1] PLUG-O-RING (9/16-18 THD)  
18. 2S-4078 [2] SEAL-O-RING (37.46MM ID)  
19. 6V-3965 C [1] NIPPLE AS  
  6V-0852 C [1] CAP-DUST  
  3J-1907 [1] SEAL-O-RING (11.89MM ID)  
20. 9S-6130 [1] PLUG-O-RING (1-5/8-12 THD)  
21. 0V-0375 [2] BOLT (1/2-13X3.25IN)  
22. 2B-0947 [6] BOLT (1/2-13X2.25IN)  
23. 1D-4566 C [6] BOLT (1/2-13X3.5IN)  
24. 5V-8897 [1] ELBOW  
25. 1P-3705 C [5] SEAL-RECTANGULAR (44.7MM ID)  
26. 4V-8312 I [1] HOSE AS  
27. 0S-1588 C [1] BOLT (3/8-16X1.25IN)  
28. 4V-8315 [1] TUBE AS  
29. 5M-2894 C [3] WASHER (2.5MM THK)  
30. 0S-1591 C [1] BOLT (3/8-16X1.5IN)  
  1D-4717 C [1] NUT (3/8-16 THD)  
31. 6V-1572 C [2] CLIP (SLOT)  
  6V-1573 C [2] CLIP (TAB)  
  6V-1574 C [2] GROMMET  
32. 0S-1625 C [8] BOLT (5/8-11X2.5IN)  
33. 4J-0524 C [3] SEAL-O-RING (47.22MM ID)  
34. 9S-1366 C [2] BOLT (1/2-13X2.5IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP13550677
 

2V-4248: LINES GP-HYDRAULIC

2V4248 LINES GP-HYDRAULIC
S/N 94X5400-5427
PART 0F 2V4242 HYDRAULIC AR
c709579 SEBP1355
2V4248 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 966D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1135 [4] BOLT (5/8-11X2IN)  
2. 5P-8247 [12] WASHER-HARD (3.5MM THK)  
3. 4V-8316 [1] ELBOW  
  7S-1156 [1] SEAL-O-RING (113.66MM ID)  
4. 5P-1717 [3] CLAMP-HOSE  
5. 5P-1296 BE HOSE  
6. 4F-7387 [1] SEAL-O-RING (100.97MM ID)  
7. 4V-8318 [1] TUBE AS  
8. 8F-8804 [2] BOLT (1/2-13X5.75IN)  
9. 1A-1460 C [6] BOLT (1/2-13X2IN)  
10. 1P-4579 [4] FLANGE-HALF  
11. 0S-1587 C [4] BOLT (1/2-13X1.75IN)  
12. 5P-8245 C [24] WASHER (3MM THK)  
13. 6W-0328 CI [1] HOSE AS  
14. 9V-4465 [1] ELBOW  
15. 5P-8077 [4] FLANGE-HALF  
16. 9V-4466 [1] ELBOW  
17. 8J-5914 [1] PLUG-O-RING (9/16-18 THD)  
18. 2S-4078 [2] SEAL-O-RING (37.46MM ID)  
19. 6V-3965 [1] NIPPLE AS  
  6V-0852 [1] CAP-DUST  
  3J-1907 [1] SEAL-O-RING (11.89MM ID)  
20. 9S-6130 [1] PLUG-O-RING (1-5/8-12 THD)  
21. 0V-0375 [2] BOLT (1/2-13X3.25IN)  
22. 2B-0947 C [2] BOLT (1/2-13X2.25IN)  
23. 1D-4566 [6] BOLT (1/2-13X3.5IN)  
24. 5V-8897 [1] ELBOW  
25. 1P-3705 C [4] SEAL-RECTANGULAR (44.7MM ID)  
26. 6W-0329 CI [1] HOSE AS  
27. 0S-1588 [1] BOLT (3/8-16X1.25IN)  
28. 9S-1366 [2] BOLT (1/2-13X2.5IN)  
29. 5M-2894 [3] WASHER (2.5MM THK)  
30. 0S-1591 [1] BOLT (3/8-16X1.5IN)  
  1D-4717 [1] NUT (3/8-16 THD)  
31. 6V-1572 [2] CLIP (SLOT)  
  6V-1573 [2] CLIP (TAB)  
  6V-1574 [2] GROMMET  
32. 0S-1625 [8] BOLT (5/8-11X2.5IN)  
33. 4J-0524 [3] SEAL-O-RING (47.22MM ID)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP13550678
 

2V-4248: LINES GP-HYDRAULIC

2V4248 LINES GP-HYDRAULIC
S/N 94X5428-5633
PART 0F 2V4242 HYDRAULIC AR
c709602 SEBP1355
2V4248 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 966D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1135 [4] BOLT (5/8-11X2IN)  
2. 5P-8247 [12] WASHER-HARD (3.5MM THK)  
3. 4V-8316 [1] ELBOW  
  7S-1156 [1] SEAL-O-RING (113.66MM ID)  
4. 5P-1717 [3] CLAMP-HOSE  
5. 5P-1296 BE HOSE  
6. 4F-7387 [1] SEAL-O-RING (100.97MM ID)  
7. 4V-8318 [1] TUBE AS  
8. 8F-8804 [2] BOLT (1/2-13X5.75IN)  
9. 1A-1460 [6] BOLT (1/2-13X2IN)  
10. 1P-4579 [4] FLANGE-HALF  
11. 0S-1587 [4] BOLT (1/2-13X1.75IN)  
12. 5P-8245 [24] WASHER (3MM THK)  
13. 6W-7295 CI [1] HOSE AS  
14. 6W-7292 C [1] ELBOW  
15. 5P-8077 [4] FLANGE-HALF  
16. 9V-4466 [1] ELBOW  
17. 8J-5914 [1] PLUG-O-RING (9/16-18 THD)  
18. 2S-4078 [2] SEAL-O-RING (37.46MM ID)  
19. 6V-3965 [1] NIPPLE AS  
  6V-0852 [1] CAP-DUST  
  3J-1907 [1] SEAL-O-RING (11.89MM ID)  
20. 9S-6130 [1] PLUG-O-RING (1-5/8-12 THD)  
21. 0V-0375 [2] BOLT (1/2-13X3.25IN)  
22. 2B-0947 [2] BOLT (1/2-13X2.25IN)  
23. 1D-4566 [6] BOLT (1/2-13X3.5IN)  
24. 5V-8897 [1] ELBOW  
25. 1P-3705 [4] SEAL-RECTANGULAR (44.7MM ID)  
26. 6W-0329 I [1] HOSE AS  
27. 0S-1588 [1] BOLT (3/8-16X1.25IN)  
28. 9S-1366 [2] BOLT (1/2-13X2.5IN)  
29. 5M-2894 [3] WASHER (2.5MM THK)  
30. 0S-1591 [1] BOLT (3/8-16X1.5IN)  
  9S-8752 C [1] NUT-FULL (3/8-16 THD)  
31. 6V-1572 [2] CLIP (SLOT)  
  6V-1573 [2] CLIP (TAB)  
  6V-1574 [2] GROMMET  
32. 0S-1625 [8] BOLT (5/8-11X2.5IN)  
33. 4J-0524 [3] SEAL-O-RING (47.22MM ID)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP13550679
 

3V-0346: LINES GP-PILOT

3V0346 LINES GP-PILOT
TYPE 1. 1U2620-PAGE 222
PART OF 4V9654 HYDRAULIC AR, 3V0345 CONVERSION AR
AN ATTACHMENT
c526151 SEBP1355
3V0346 LINES GP-PILOT Parts scheme
  For full view, you need register

Parts for your 966D WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-6806 [3] CONNECTOR  
2. 3J-1907 [8] SEAL  
3. 030-7947 [3] ELBOW  
4. 5P-1404 [2] ADAPTER-O-RING  
  2M-9780 [2] SEAL-O-RING  
5. 0L-2070 [3] BOLT  
  5M-2894 [3] WASHER  
6. 1U-2620 Y [1] VALVE GP-PILOT  
7. 030-8156 [1] ELBOW  
8. 7V-6703 [1] TUBE AS  
9. 7V-6704 [1] TUBE AS  
10. 8V-0722 I [1] HOSE AS  
11. 8V-0723 I [1] HOSE AS  
12. 030-7942 [1] ELBOW  
13. 7V-6571 [4] GROMMET  
14. 7V-6659 [4] CLAMP-DOUBLE  
15. 4V-0968 [2] LOCK  
16. 4V-0939 [2] BOLT  
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog 966D :

VALVE GP-RELIEF
4T-2764 VALVE GP-RELIEF
PUMP & MOUNTING GP
7V-2889 PUMP & MOUNTING GP
VALVE GP-RELIEF
4T-8614 VALVE GP-RELIEF
VALVE GP-RELIEF
4T-4162 VALVE GP-RELIEF
VALVE GP-RELIEF
4T-8618 VALVE GP-RELIEF
VALVE GP-RELIEF
4T-4751 VALVE GP-RELIEF
VALVE GP
4T-2745 VALVE GP
VALVE GP-RELIEF
4T-2742 VALVE GP-RELIEF
PUMP GP-VANE
1U-2220 PUMP GP-VANE
PUMP GP-VANE
4T-6847 PUMP GP-VANE
CARTRIDGE GP-REAR
1U-2667 CARTRIDGE GP-REAR
CARTRIDGE GP
4T-0422 CARTRIDGE GP
LINES GP-HYDRAULIC
2V-4248 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
2V-4248 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
2V-4248 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
2V-4248 LINES GP-HYDRAULIC

Truck sale:

Caterpillar 966D, Construction
41,668 USD 
Caterpillar 966D, Construction
- Wheel Loaders
FINNING CANADA
Canada
Caterpillar 966D, Construction
65,000 
Caterpillar 966D, Construction
- Wheel Loaders
N C MACHINERY CO.
 
 
1985 CAT 966D

Petrowsky Auctioneers Inc
Cromwell, Connecticut
CATERPILLAR 966D 1987
$35,981 USD 
CATERPILLAR 966D 1987
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
1981 CAT 966D
Call 
1981 CAT 966D

GERL Baumaschinen Handel - AUSTRIA
Haid, Austria, Austria
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.