3G1550 LINES GP-TILT CYLINDER TYPE 1 PART OF 3G6087,4T7702,7T3639,3G6092,7T3460 BULLDOZER ARS AN ATTACHMENT D8L



HYDRAULIC SYSTEM
LINES GP-CYLINDER
CYLINDER GP

TRACK-TYPE TRACTOR D8L TRACK-TYPE TRACTOR 53Y
 D8L TRACTOR 53Y00001-UP (MACHINE) POWERED BY 3408 ENGINE SEBP1356 D8L 53Y   (1981)

HYDRAULIC SYSTEM

LINES GP-CYLINDER
LINES GP-TILT CYLINDER
8P-1253 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
8P-1253 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
3G-1550 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
3G-1550 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
3G-1550 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
3G-8030 LINES GP-TILT CYLINDER
 

#SEBP13560780
 

3G-1550: LINES GP-TILT CYLINDER

3G1550 LINES GP-TILT CYLINDER
TYPE 1
PART OF 3G6087,4T7702,7T3639,3G6092,7T3460 BULLDOZER ARS
AN ATTACHMENT
c311151 SEBP1356
3G1550 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1U-3558 I [1] HOSE AS  
  9S-0671 G HOSE 25.98IN(66CM)  
  3S-9454 [1] STEM AS-COLLET (STRAIGHT)  
2. 3S-8606 [2] SLEEVE  
3. 5S-9593 [1] STEM AS-COLLET (90 DEGREE)  
4. 3B-1915 [48] BOLT  
5. 5M-2894 [52] WASHER  
6. 4J-5267 [13] SEAL  
7. 1P-4576 [24] FLANGE  
8. 3G-7326 [1] TUBE AS  
9. 1U-3557 I [1] HOSE AS  
  9S-0671 G HOSE 29.29IN(76CM)  
  3S-9454 [1] STEM AS-COLLET (STRAIGHT)  
10. 3S-8606 [2] SLEEVE  
11. 5S-9593 [1] STEM AS-COLLET (90 DEGREE)  
12. 0S-1595 [9] BOLT  
  5P-8245 [9] WASHER  
13. 3G-7452 I [1] HOSE AS  
  9S-0247 G HOSE 31.1IN(79CM)  
  6V-0745 CE GUARD-HOSE 70CM(27.55IN)  
  3S-7165 [1] STEM AS (STRAIGHT)  
14. 3S-8363 [1] STEM AS (90 DEGREE)  
15. 3S-7166 [2] SLEEVE  
16. 3G-7806 I [1] HOSE AS  
  9S-0247 HOSE 32.28IN(82CM)  
  6V-0745 CE GUARD-HOSE 62CM(24.4IN)  
17. 3S-8363 [2] STEM AS  
18. 3S-7166 [2] SLEEVE  
19. 0T-0690 [4] BOLT  
  5P-8249 [4] WASHER  
20. 1U-3587 [1] GUARD  
21. 1D-4599 [4] BOLT  
  1D-4720 [4] NUT  
  5P-8247 [4] WASHER-HARD  
22. 3G-7451 I [2] HOSE AS  
    (EACH INCLUDES)
  9S-0247 G HOSE 62.99IN(160CM)  
23. 3S-7166 [2] SLEEVE  
24. 3S-8362 [2] STEM AS-COLLET  
25. 3G-7172 [2] PLATE-COVER  
26. 3G-7168 [2] GUARD  
27. 0S-1590 [4] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP13560781
 

3G-1550: LINES GP-TILT CYLINDER

3G1550 LINES GP-TILT CYLINDER
TYPE 2
PART OF 3G6087,4T7702,7T3639,3G6092,7T3460 BULLDOZER ARS
AN ATTACHMENT
c327535 SEBP1356
3G1550 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1U-3558 [1] HOSE AS  
  9S-0671 BG HOSE  
  3S-9454 [1] STEM AS-COLLET (STRAIGHT)  
2. 3S-8606 [2] SLEEVE  
3. 5S-9593 [1] STEM AS-COLLET (90)  
4. 3B-1915 C [40] BOLT  
5. 5M-2894 C [44] WASHER  
6. 4J-5267 C [11] SEAL  
7. 1P-4576 C [20] FLANGE  
8. 4T-5338 C [1] TUBE AS  
9. 1U-3557 [1] HOSE AS  
  9S-0671 BG HOSE  
  3S-9454 [1] STEM AS-COLLET (STRAIGHT)  
10. 3S-8606 [2] SLEEVE  
11. 5S-9593 [1] STEM AS-COLLET (90)  
12. 0S-1595 [9] BOLT  
  5P-8245 [9] WASHER  
13. 3G-7452 C [2] HOSE AS  
    (EACH INCLUDES)
  9S-0247 BG HOSE  
  6V-0745 E GUARD-HOSE 70CM(27.55IN.)  
  3S-7165 [1] STEM AS (STRAIGHT)  
14. 3S-8363 [1] STEM AS (90)  
15. 3S-7166 [2] SLEEVE  
16. 0S-1590 [4] BOLT  
17. 3G-7168 [2] GUARD  
18. 3G-7172 [2] PLATE-COVER  
19. 0T-0690 [4] BOLT  
  5P-8249 [4] WASHER  
20. 4T-5336 C [1] GUARD AS  
21. 1D-4597 C [4] BOLT  
  1D-4720 [4] NUT  
  5P-8247 [8] WASHER-HARD  
22. 3G-7451 [2] HOSE AS  
    (EACH INCLUDES)
  9S-0247 BG HOSE  
23. 3S-7166 [2] SLEEVE  
24. 3S-8362 [2] STEM AS-COLLET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
 

#SEBP13560782
 

3G-1550: LINES GP-TILT CYLINDER

3G1550 LINES GP-TILT CYLINDER
JAPAN MARKET
c311151 SEBP1356
3G1550 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1U-3558 I [1] HOSE AS  
  9S-0671 G HOSE 25.98IN(66CM)  
  3S-9454 [1] STEM AS-COLLET (STRAIGHT)  
2. 3S-8606 [2] SLEEVE  
3. 5S-9593 [1] STEM AS-COLLET (90 DEGREE)  
4. 3B-1915 [48] BOLT  
5. 5M-2894 [52] WASHER  
6. 4J-5267 [13] SEAL  
7. 1P-4576 [24] FLANGE  
8. 3G-7326 [1] TUBE AS  
9. 1U-3557 I [1] HOSE AS  
  9S-0671 G HOSE 29.29IN(76CM)  
  3S-9454 [1] STEM AS-COLLET (STRAIGHT)  
10. 3S-8606 [2] SLEEVE  
11. 5S-9593 [1] STEM AS-COLLET (90 DEGREE)  
12. 0S-1595 [9] BOLT  
  5P-8245 [9] WASHER  
13. 3G-7452 I [1] HOSE AS  
  9S-0247 G HOSE 31.1IN(79CM)  
  6V-0745 CE GUARD-HOSE 70CM(27.55IN)  
  3S-7165 [1] STEM AS (STRAIGHT)  
14. 3S-8363 [1] STEM AS (90 DEGREE)  
15. 3S-7166 [2] SLEEVE  
16. 3G-7806 I [1] HOSE AS  
  9S-0247 HOSE 32.28IN(82CM)  
  6V-0745 CE GUARD-HOSE 62CM(24.4IN)  
17. 3S-8363 [2] STEM AS  
18. 3S-7166 [2] SLEEVE  
19. 0T-0690 [4] BOLT  
  5P-8249 [4] WASHER  
20. 1U-3587 [1] GUARD  
21. 1D-4599 [4] BOLT  
  1D-4720 [4] NUT  
  5P-8247 [4] WASHER-HARD  
22. 3G-7451 I [2] HOSE AS  
    (EACH INCLUDES)
  9S-0247 G HOSE 62.99IN(160CM)  
23. 3S-7166 [2] SLEEVE  
24. 3S-8362 [2] STEM AS-COLLET  
25. 3G-7172 [2] PLATE-COVER  
26. 3G-7168 [2] GUARD  
27. 0S-1590 [4] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP13560783
 

3G-8030: LINES GP-TILT CYLINDER

3G8030 LINES GP-TILT CYLINDER-PART 1 OF 2
PART OF 3G6155 CYLINDER AR
AN ATTACHMENT
c235265 SEBP1356
3G8030 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 0S-1571 [4] BOLT  
2. 0T-0690 [4] BOLT  
3. 5P-8249 [4] WASHER  
4. 1U-4178 [1] TUBE AS  
5. 1U-4172 [1] GUARD AS  
6. 0S-1595 [1] BOLT  
7. 5P-8245 [1] WASHER  
8. 1P-4576 [6] FLANGE  
9. 4J-5267 [6] SEAL  
10. 3B-1915 [12] BOLT  
11. 5M-2894 [14] WASHER  
12. 0S-1585 [1] BOLT  
13. 1J-7647 [1] CLAMP (TAPPED)  
14. 1J-7468 [1] CLAMP  
15. 1U-4166 [1] BLOCK  
16. 0S-0509 [2] BOLT  
17. 7V-4240 [2] BLOCK  
18. 0S-1591 [8] BOLT  
19. 1U-4177 [1] TUBE AS  
20. 1U-4176 [1] TUBE AS  
21. 1U-4179 I [2] HOSE AS  
    (EACH INCLUDES)
  9S-0247 G HOSE 86.62IN(220CM)  
  6V-0745 E GUARD-HOSE 135CM(53.15IN)  
  3S-8363 [1] STEM AS (90 DEGREE)  
22. 3S-7166 [4] SLEEVE  
23. 2P-2525 [1] STEM AS (STRAIGHT)  
24. 3S-8361 [1] STEM AS (60 DEGREE)  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP13560784
 

3G-8030: LINES GP-TILT CYLINDER

3G8030 LINES GP-TILT CYLINDER-PART 2 OF 2
PART OF 3G6155 CYLINDER AR
AN ATTACHMENT
c235978 SEBP1356
3G8030 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3B-1915 [20] BOLT  
2. 5M-2894 [20] WASHER  
3. 1P-4577 [2] FLANGE-HALF  
  4J-0520 [1] SEAL 32.92MM(1.33IN)ID  
4. 1U-4180 I [1] HOSE AS  
  9S-0247 G HOSE 45.67IN(116CM)  
  6V-0745 E GUARD-HOSE 107CM(42.13IN)  
5. 6V-3364 [1] STEM AS-COLLET (135 DEGREE)  
6. 3S-7166 [2] SLEEVE  
7. 3S-8363 [1] STEM AS (90 DEGREE)  
8. 1U-4181 I [1] HOSE AS  
  9S-0247 G HOSE 50.59IN(128.5CM)  
  6V-0745 E GUARD-HOSE 119.5CM(47.05IN)  
9. 3S-8360 [1] STEM AS-COLLET (45 DEGREE)  
10. 3S-7166 [2] SLEEVE  
11. 3S-8363 [1] STEM AS  
12. 1P-4576 [8] FLANGE  
13. 4J-5267 [4] SEAL 24.99CM(.98IN)ID  
14. 1U-2332 [1] TUBE AS  
15. 5S-8712 [3] BLOCK (TOP)  
16. 5S-8711 [3] BLOCK (LOWER)  
17. 1U-4171 [1] GUARD  
18. 0S-1591 [3] BOLT  
19. 9S-1366 [3] BOLT  
  5P-8245 [3] WASHER  
20. 1U-4099 [1] TUBE AS  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP13560785
 

9J-8802: CYLINDER GP-BULLDOZER TILT

9J8802 CYLINDER GP-BULLDOZER TILT
TYPE 1. 190.5MM (7.5IN) BORE X 349.2MM (13.7IN) STROKE
PART OF 3G6155 CYLINDER AR
AN ATTACHMENT
c182572 SEBP1356
9J8802 CYLINDER GP-BULLDOZER TILT Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9J-8803 [1] CYLINDER ASSEM.  
    (Includes)
2. 1U-2182 [2] BEARING  
3. 1U-2583 [1] PISTON  
4. 5P-3235 [1] RING  
  4H-6520 [1] SEAL  
5. 1D-4629 [2] BOLT 88.90mm(3.50 in.)long  
  1D-4628 [6] BOLT 82.55mm(3.25 in.)long  
  5P-8249 [8] WASHER  
6. 6J-6736 [1] SEAL  
7. 5J-8350 [1] SEAL  
8. 1U-2183 [1] ROD ASSEM.  
    (Includes)
9. 6V-3340 [1] BEARING  
10. 7J-3296 [2] RING  
11. 4J-8981 [1] SEAL  
12. 9J-8808 [1] HEAD  
13. 9J-7117 [1] SEAL ASSEM.  
14. 1U-2218 [1] RING  
15. 4J-6888 C [1] NUT  
  C   INDICATES CHANGE
 

#SEBP13560786
 

9J-8802: CYLINDER GP-BULLDOZER TILT

9J8802 CYLINDER GP-BULLDOZER TILT
TYPE 2. 190.5MM (7.5IN) BORE X 349.2MM (13.7IN) STROKE
PART OF 3G6155 CYLINDER AR
AN ATTACHMENT
c330159 SEBP1356
9J8802 CYLINDER GP-BULLDOZER TILT Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9J-8803 [1] CYLINDER AS  
2. 1U-2182 [2] BEARING-SLEEVE  
3. 1U-2583 [1] PISTON  
4. 4T-3107 C [1] RING-BACK-UP  
  4H-6520 [1] SEAL-O-RING  
5. 1D-4629 [2] BOLT 88.90MM(3.50IN.)LG.  
  1D-4628 [6] BOLT 82.55MM(3.25IN.)LG.  
  5P-8249 [8] WASHER  
6. 6J-6736 [1] SEAL-RING  
7. 5J-8350 [1] SEAL  
8. 4T-6838 CR [1] ROD AS  
9. 6V-3340 [1] BEARING-SPHERICAL  
10. 5J-9454 [1] RING-RETAINING  
11. 4J-8981 [1] SEAL-LIP TYPE  
12. 9J-8808 [1] HEAD  
13. 9J-7117 [1] SEAL AS  
14. 1U-2218 [1] RING-WEAR  
15. 4J-6888 [1] NUT-SELF LOCKING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13560787
 

9J-8802: CYLINDER GP-BULLDOZER TILT

9J8802 CYLINDER GP-BULLDOZER TILT
TYPE 3. 190.5MM (7.5IN) BORE X 349.2MM (13.7IN) STROKE
PART OF 3G6155 CYLINDER AR
AN ATTACHMENT
c351303 SEBP1356
9J8802 CYLINDER GP-BULLDOZER TILT Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9J-8803 [1] CYLINDER AS  
2. 1U-2182 [2] BEARING-SLEEVE  
3. 1U-2583 [1] PISTON  
4. 4T-3107 [1] RING-BACK-UP  
  4H-6520 [1] SEAL-O-RING  
5. 1D-4629 [2] BOLT 88.90MM(3.50IN)LG  
  1D-4628 [6] BOLT 82.55MM(3.25IN)LG  
  5P-8249 [8] WASHER  
6. 6J-6736 [1] SEAL-RING  
7. 5J-8350 [1] SEAL  
8. 4T-6838 R [1] ROD AS  
9. 6V-3340 [1] BEARING-SPHERICAL  
10. 5J-9454 [1] RING-RETAINING  
11. 4J-8981 [1] SEAL-LIP TYPE  
12. 9T-3508 C [1] HEAD  
13. 9J-7117 [1] SEAL AS  
14. 1U-2218 [1] RING-WEAR  
15. 4J-6888 [1] NUT-SELF LOCKING  
16. 8T-6746 C [1] RING-WEAR  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13560788
 

3G-6457: CYLINDER GP-RIPPER

3G6457 CYLINDER GP-RIPPER
TYPE 1. 210MM (8.3IN) BORE X 457MM (18IN) STROKE
PART OF 4T0148,4T0150,7T6939,7T6940 RIPPER ARS
AN ATTACHMENT
c312198 SEBP1356
3G6457 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE  
2. 7J-1965 [2] WASHER  
3. 5J-5559 [1] SEAL AS  
4. 1J-2176 C [1] SEAL-O-RING  
5. 2J-0744 [1] RING-BACK-UP  
6. 1D-4631 [2] BOLT  
7. 5P-8249 [8] WASHER  
8. 3G-6827 [1] ROD AS-PISTON  
9. 3G-5999 [1] BEARING-SLEEVE  
10. 6J-4169 [1] SEAL-LIP TYPE  
11. 5J-8325 R [1] SEAL-U-CUP  
12. 6J-7167 [1] SEAL-O-RING  
13. 1D-4627 [6] BOLT  
14. 6J-8319 [1] HEAD  
15. 3G-6828 [1] CYLINDER AS-HYD  
16. 3G-5999 [1] BEARING-SLEEVE  
17. 1U-1808 [1] PISTON  
18. 4J-7376 R [1] RING-WEAR  
19. 5J-3488 [1] NUT-SELF LOCKING  
20. 3J-7283 [1] FITTING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13560789
 

3G-6457: CYLINDER GP-RIPPER

3G6457 CYLINDER GP-RIPPER
210MM (8.3IN) BORE X 457MM (18IN) STROKE-TYPE 2
PART OF 4T0148,4T0150,7T6939,7T6940 RIPPER ARS
AN ATTACHMENT
c530630 SEBP1356
3G6457 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE  
2. 7J-1965 [2] WASHER  
3. 5J-5559 [1] SEAL AS  
4. 1J-2176 [1] SEAL-O-RING  
5. 2J-0744 [1] RING-BACK-UP  
6. 1D-4630 C [2] BOLT  
7. 5P-8249 [8] WASHER  
8. 3G-6827 R [1] ROD AS-PISTON  
9. 3G-5999 [1] BEARING-SLEEVE  
10. 8T-8389 [1] SEAL  
11. 5J-8325 [1] SEAL-U-CUP  
12. 8C-9121 [1] SEAL AS  
13. 1D-4627 [6] BOLT  
14. 9T-3505 C [1] HEAD  
15. 3G-6828 R [1] CYLINDER AS-HYD  
16. 3G-5999 [1] BEARING-SLEEVE  
17. 1U-1808 [1] PISTON  
18. 4J-7376 [1] RING-WEAR  
19. 5J-3488 [1] NUT-SELF LOCKING  
20. 8T-6745 C [1] RING-WEAR  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Service Magazine
Correct Orientation Of Mounting Groups For Bulldozer Lift Cylinders Necessary To Prevent Interference Between Tilt Cylinder Guard, Push Frame And Track{5102,6050,6051,6053,6054}
1983/09/26

Caterpillar Parts SIS Catalog D8L :

LINES GP-TILT CYLINDER
8P-1253 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
8P-1253 LINES GP-TILT CYLINDER
LINK GP
4T-0198 LINK GP
LINES GP-RIPPER
4T-0199 LINES GP-RIPPER
LINES GP-RIPPER
4T-0199 LINES GP-RIPPER
LINES GP-RIPPER
9W-7500 LINES GP-RIPPER
LINES GP-RIPPER
4T-0201 LINES GP-RIPPER
LINES GP-RIPPER
4T-0201 LINES GP-RIPPER
LINES GP-TILT CYLINDER
3G-1550 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
3G-1550 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
3G-8030 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
3G-8030 LINES GP-TILT CYLINDER
CYLINDER GP-BULLDOZER TILT
9J-8802 CYLINDER GP-BULLDOZER TILT
CYLINDER GP-BULLDOZER TILT
9J-8802 CYLINDER GP-BULLDOZER TILT
CYLINDER GP-BULLDOZER TILT
9J-8802 CYLINDER GP-BULLDOZER TILT
CYLINDER GP-RIPPER
3G-6457 CYLINDER GP-RIPPER

Truck sale:

Caterpillar D8L, Construction
250,617 USD 
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar D8L, Construction
 
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar D8L, Construction
75,000 
Caterpillar D8L, Construction
- Dozers
NMC
CATERPILLAR D8L 1984
 
CATERPILLAR D8L 1984
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1985 CAT D8L
USD $57,950 
1985 CAT D8L

Global Heavy Resources Inc.