OPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
VALVE GP-CONTROLPULLER GP-PIN
CYLINDER GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP13560800
7G-5124: CONTROL AR-HYDRAULIC
7G5124 CONTROL AR-HYDRAULIC-PIN PULLER-PART 1 OF 2
TYPE 1. S/N 53Y1-3484
REQUIRED WHENEVER A MACHINE IS EQUIPPED WITH A 4T0147 RIPPER OR A
9P9906 PIN PULLER AR
AN ATTACHMENT
TYPE 1. S/N 53Y1-3484
REQUIRED WHENEVER A MACHINE IS EQUIPPED WITH A 4T0147 RIPPER OR A
9P9906 PIN PULLER AR
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3D-2824 | [2] | SEAL-O-RING | |
| 2. | 2P-7211 | [1] | TEE | |
| 3. | 6K-9194 | [1] | ELBOW | |
| 030-6936 | [1] | REDUCER-FLARED | ||
| 8M-0744 | [1] | NUT-FLARED | ||
| 4. | 3T-0253 | [1] | HOSE AS | |
| 2P-5943 | HOSE 75.6IN.(192CM) | |||
| 5. | 4S-5414 | [2] | SLEEVE | |
| 6. | 8S-6417 | [1] | COUPLING AS (STRAIGHT) | |
| 7. | 8S-6393 G | [1] | COUPLING AS (90) | |
| 8. | 5P-7462 | [1] | CLIP (TAB) | |
| 5P-7463 | [1] | CLIP (SLOT) | ||
| 6V-0683 | [1] | GROMMET | ||
| 9. | 0S-1608 | [1] | BOLT | |
| 2D-6412 | [1] | WASHER | ||
| 10. | 2P-8421 | [1] | ADAPTER-O-RING | |
| 11. | 2R-6806 | [2] | CONNECTOR | |
| 12. | 3J-1907 | [3] | SEAL | |
| 13. | 2V-5924 | [1] | HOSE AS | |
| 2P-5943 | HOSE 60.63IN.(154CM) | |||
| 14. | 4S-5414 | [2] | SLEEVE | |
| 15. | 8S-6417 | [1] | COUPLING AS (STRAIGHT) | |
| 16. | 8S-6393 G | [1] | COUPLING AS (90) | |
| 17. | 1P-1376 | [1] | CONNECTOR-PORT | |
| 18. | 8B-2377 | [2] | BOLT | |
| 5P-0537 | [2] | WASHER | ||
| 1B-4330 | [2] | NUT | ||
| 19. | 0S-1594 | [3] | BOLT | |
| 5M-2894 | [3] | WASHER | ||
| 20. | 9P-1485 | [1] | BRACKET AS | |
| 21. | 7K-4129 | [2] | UNION-FLARED | |
| G | ORDER BY THE INCH | |||
#SEBP13560801
7G-5124: CONTROL AR-HYDRAULIC
7G5124 CONTROL AR-HYDRAULIC-PIN PULLER-PART 2 OF 2
TYPE 1. S/N 53Y1-3484
3G9668-PAGE 236. REQUIRED WHENEVER A MACHINE IS EQUIPPED WITH A 4T0147
RIPPER OR A 9P9906 PIN PULLER AR
AN ATTACHMENT
TYPE 1. S/N 53Y1-3484
3G9668-PAGE 236. REQUIRED WHENEVER A MACHINE IS EQUIPPED WITH A 4T0147
RIPPER OR A 9P9906 PIN PULLER AR
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8054 | [1] | CLIP (TAB) | |
| 3G-8057 | [1] | CLIP (SLOT) | ||
| 6V-0974 C | [1] | GROMMET | ||
| 2. | 1A-2029 C | [2] | BOLT | |
| 3. | 5M-2894 C | [4] | WASHER | |
| 4. | 0S-1594 C | [2] | BOLT | |
| 5. | 3T-0254 C | [2] | HOSE AS | |
| (EACH INCLUDES) | ||||
| 2P-5943 | HOSE 66.93IN.(170CM) | |||
| 1P-9919 C | [1] | COUPLING AS (45) | ||
| 8S-6417 | [1] | COUPLING AS (STRAIGHT) | ||
| 4S-5414 G | [2] | SLEEVE | ||
| 6. | 6D-0679 | [1] | KNOB | |
| 7. | 9P-2239 | [1] | BOOT | |
| 8. | 3P-5668 | [1] | HANDLE | |
| 9. | 3G-9668 | [1] | VALVE GP-CONTROL | |
| 10. | 030-7942 | [2] | ELBOW | |
| 3J-1907 | [2] | SEAL | ||
| 11. | 1P-3321 Y | [2] | PIN | |
| 4B-4274 | [4] | WASHER | ||
| 3B-4604 | [2] | PIN-COTTER | ||
| 12. | 3P-5669 | [2] | LINK | |
| 13. | 4B-3057 | [1] | PIN-CLEVIS | |
| 3B-4607 | [1] | COTTER | ||
| 14. | 5P-7462 | [2] | CLIP (TAB) | |
| 5P-7463 | [2] | CLIP (SLOT) | ||
| 15. | 6V-0683 | [2] | GROMMET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| G | ORDER BY THE INCH | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13560802
7G-5124: CONTROL AR-HYDRAULIC
7G5124 CONTROL AR-HYDRAULIC-PIN PULLER-PART 1 OF 2
TYPE 2. S/N 53Y1-3484
REQUIRED WHENEVER A MACHINE IS EQUIPPED WITH A 4T0147 RIPPER OR A
9P9906 PIN PULLER AR
AN ATTACHMENT
TYPE 2. S/N 53Y1-3484
REQUIRED WHENEVER A MACHINE IS EQUIPPED WITH A 4T0147 RIPPER OR A
9P9906 PIN PULLER AR
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3D-2824 | [2] | SEAL | |
| 2. | 2P-7211 | [1] | TEE | |
| 3. | 6K-9194 | [1] | ELBOW | |
| 030-6936 | [1] | REDUCER | ||
| 8M-0744 | [1] | NUT | ||
| 4. | 3T-0253 | [1] | HOSE AS. | |
| 2P-5943 G | HOSE 75.6IN.(192CM) | |||
| 5. | 4S-5414 | [2] | SLEEVE | |
| 6. | 8S-6417 | [1] | COUPLING AS. (STRAIGHT) | |
| 7. | 8S-6393 | [1] | COUPLING AS. (90 degrees) | |
| 8. | 5P-1075 C | [1] | WASHER | |
| 9. | 9P-2749 C | [2] | CLIP (SLOT) | |
| 9P-2750 C | [2] | CLIP (TAB) | ||
| 10. | 2P-8421 | [1] | ADAPTER | |
| 11. | 2R-6806 | [2] | CONNECTOR | |
| 12. | 3J-1907 | [3] | SEAL | |
| 13. | 2V-5924 | [1] | HOSE AS. | |
| 2P-5943 G | HOSE 60.63IN.(154CM) | |||
| 14. | 4S-5414 | [2] | SLEEVE | |
| 15. | 8S-6417 | [1] | COUPLING AS. (STRAIGHT) | |
| 16. | 8S-6393 | [1] | COUPLING AS. (90 degrees) | |
| 17. | 1P-1376 | [1] | CONNECTOR | |
| 18. | 8B-2377 | [2] | BOLT | |
| 5P-0537 | [2] | WASHER | ||
| 1B-4330 | [2] | NUT | ||
| 19. | 0S-1594 C | [4] | BOLT | |
| 20. | 9P-1485 | [1] | BRACKET AS. | |
| 21. | 5M-2894 | [3] | WASHER | |
| 22. | 4T-2142 C | [1] | CLIP AS. | |
| 5H-9394 | [1] | BOSS | ||
| 23. | 0S-1621 C | [1] | BOLT | |
| 5P-8245 C | [1] | WASHER | ||
| C | INDICATES CHANGE | |||
| G | ORDER BY THE INCH | |||
#SEBP13560803
7G-5124: CONTROL AR-HYDRAULIC
7G5124 CONTROL AR-HYDRAULIC-PIN PULLER-PART 2 OF 2
TYPE 2. S/N 53Y1-3484
3G9668-PAGE 236. REQUIRED WHENEVER A MACHINE IS EQUIPPED WITH A 4T0147
RIPPER OR A 9P9906 PIN PULLER AR
AN ATTACHMENT
TYPE 2. S/N 53Y1-3484
3G9668-PAGE 236. REQUIRED WHENEVER A MACHINE IS EQUIPPED WITH A 4T0147
RIPPER OR A 9P9906 PIN PULLER AR
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8054 | [1] | CLIP (TAB) | |
| 3G-8057 | [1] | CLIP (SLOT) | ||
| 6V-0974 | [1] | GROMMET | ||
| 2. | 1A-2029 C | [1] | BOLT | |
| 3. | 5M-2894 C | [3] | WASHER | |
| 4. | 0S-0509 C | [1] | BOLT | |
| 1D-4717 C | [1] | NUT | ||
| 5. | 3T-0254 I | [2] | HOSE AS | |
| (EACH INCLUDES) | ||||
| 2P-5943 G | HOSE 66.93IN(170CM) | |||
| 1P-9919 | [1] | COUPLING AS (45 DEGREE) | ||
| 8S-6417 | [1] | COUPLING AS (STRAIGHT) | ||
| 4S-5414 | [2] | SLEEVE | ||
| 6. | 6D-0679 | [1] | KNOB | |
| 7. | 9P-2239 | [1] | BOOT | |
| 8. | 3P-5668 | [1] | HANDLE | |
| 9. | 3G-9668 Y | [1] | VALVE GP-CONTROL | |
| 10. | 1P-1376 C | [1] | CONNECTOR-PORT | |
| 11. | 1P-3321 | [2] | PIN | |
| 4B-4274 | [4] | WASHER | ||
| 3B-4604 | [2] | PIN-COTTER | ||
| 12. | 3P-5669 | [2] | LINK | |
| 13. | 4B-3057 | [1] | PIN-CLEVIS | |
| 3B-4607 | [1] | COTTER (PIN) | ||
| 14. | 2R-6806 C | [1] | CONNECTOR | |
| 15. | 3J-1907 | [2] | SEAL | |
| 16. | 7K-4129 | [2] | UNION-FLARED | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| G | ORDER BY THE INCH | |||
| I | SEE HOSE FABRICATION GUIDE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13560804
7G-5124: CONTROL AR-HYDRAULIC
7G5124 CONTROL AR-HYDRAULIC-PIN PULLER-PART 1 OF 2
TYPE 3. S/N 53Y1-3484
REQUIRED WHENEVER A MACHINE IS EQUIPPED WITH A 4T0147 RIPPER OR A
9P9906 PIN PULLER AR
AN ATTACHMENT
TYPE 3. S/N 53Y1-3484
REQUIRED WHENEVER A MACHINE IS EQUIPPED WITH A 4T0147 RIPPER OR A
9P9906 PIN PULLER AR
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3D-2824 | [2] | SEAL-O-RING | |
| 2. | 2P-7211 | [1] | TEE | |
| 3. | 6K-9194 | [1] | ELBOW | |
| 030-6936 | [1] | REDUCER-FLARED | ||
| 8M-0744 | [1] | NUT-FLARED | ||
| 4. | 3T-9577 C | [1] | HOSE AS | |
| 5. | 0S-1621 | [1] | BOLT | |
| 5P-8245 | [1] | WASHER | ||
| 6. | 4T-2142 | [1] | CLIP AS | |
| 5H-9394 | [1] | BOSS | ||
| 7. | 5M-2894 | [3] | WASHER | |
| 8. | 5P-1075 | [1] | WASHER-HARD | |
| 9. | 9P-2749 | [2] | CLIP (SLOT) | |
| 9P-2750 | [2] | CLIP (TAB) | ||
| 10. | 2P-8421 | [1] | ADAPTER-O-RING | |
| 11. | 2R-6806 | [2] | CONNECTOR | |
| 12. | 3J-1907 | [3] | SEAL | |
| 13. | 3V-3680 C | [1] | HOSE AS | |
| 14. | 9P-1485 | [1] | BRACKET AS | |
| 15. | 0S-1594 | [4] | BOLT | |
| 16. | 8B-2377 | [2] | BOLT | |
| 5P-0537 | [2] | WASHER | ||
| 1B-4330 | [2] | NUT | ||
| 17. | 1P-1376 | [1] | CONNECTOR-PORT | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP13560805
7G-5124: CONTROL AR-HYDRAULIC
7G5124 CONTROL AR-HYDRAULIC-PIN PULLER-PART 2 OF 2
TYPE 3. S/N 53Y1-3484
3G9668-PAGE 236. REQUIRED WHENEVER A MACHINE IS EQUIPPED WITH A 4T0147
RIPPER OR A 9P9906 PIN PULLER AR
AN ATTACHMENT
TYPE 3. S/N 53Y1-3484
3G9668-PAGE 236. REQUIRED WHENEVER A MACHINE IS EQUIPPED WITH A 4T0147
RIPPER OR A 9P9906 PIN PULLER AR
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8054 | [1] | CLIP (TAB) | |
| 3G-8057 | [1] | CLIP (SLOT) | ||
| 6V-0974 | [1] | GROMMET | ||
| 2. | 1A-2029 | [1] | BOLT | |
| 3. | 5M-2894 | [3] | WASHER | |
| 4. | 0S-1594 C | [1] | BOLT | |
| 1D-4717 | [1] | NUT | ||
| 5. | 3T-0254 | [2] | HOSE AS | |
| 6. | 6D-0679 | [1] | KNOB | |
| 7. | 9P-2239 | [1] | BOOT | |
| 8. | 3P-5668 | [1] | HANDLE | |
| 9. | 3G-9668 Y | [1] | VALVE GP-CONTROL | |
| 10. | 1P-1376 | [1] | CONNECTOR-PORT | |
| 11. | 1P-3321 | [2] | PIN | |
| 4B-4274 | [4] | WASHER | ||
| 3B-4604 | [2] | PIN-COTTER | ||
| 12. | 3P-5669 | [2] | LINK | |
| 13. | 4B-3057 | [1] | PIN-CLEVIS | |
| 3B-4607 | [1] | COTTER | ||
| 14. | 2R-6806 | [1] | CONNECTOR | |
| 15. | 3J-1907 | [2] | SEAL | |
| 16. | 7K-4129 | [2] | UNION-FLARED | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13560806
7T-4413: CONTROL AR-HYDRAULIC
7T4413 CONTROL AR-HYDRAULIC
PIN PULLER
S/N 53Y3485-UP
6T4531-PAGE 198
AN ATTACHMENT
PIN PULLER
S/N 53Y3485-UP
6T4531-PAGE 198
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2P-8421 | [1] | ADAPTER-O-RING | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 2. | 7T-9611 I | [1] | HOSE AS | |
| 3. | 6V-9001 | [2] | ELBOW | |
| 4. | 3J-1907 | [4] | SEAL-O-RING | |
| 5. | 8T-9384 B | [1] | BOLT | |
| 8T-4223 B | [1] | WASHER-HARD | ||
| 5P-7458 B | [1] | CLIP (SLOT) | ||
| 5P-7459 B | [1] | CLIP (TAB) | ||
| 6. | 7T-9612 I | [1] | HOSE AS | |
| 7. | 7K-1181 | [1] | STRAP-CABLE | |
| 8. | 6T-4531 Y | [1] | VALVE & MOUNTING GP | |
| 9. | 8T-9101 | [4] | BOLT | |
| 10. | 8T-4896 | [7] | WASHER-HARD | |
| 11. | 2K-4973 | [4] | LOCKNUT | |
| 12. | 7T-4414 | [1] | BRACKET | |
| 13. | 5M-3062 C | [1] | BOLT | |
| 14. | 6V-8724 | [1] | ELBOW | |
| 15. | 7T-7628 | [1] | HARNESS AS | |
| 16. | 6V-8636 | [1] | CONNECTOR | |
| 17. | 6V-8397 | [4] | SEAL-O-RING | |
| 18. | 3T-3045 | [2] | CLIP AS | |
| 19. | 4D-7794 | [3] | CLIP | |
| 20. | 6T-6970 | [1] | SWITCH AS-TOGGLE (WARNING) | |
| 6T-3631 | [2] | NUT-HEX | ||
| 6T-3632 | [1] | LOCKWASHER (LARGE) | ||
| 6T-3633 | [1] | LOCKRING | ||
| 6V-8374 | [3] | SCREW-MACHINE | ||
| 3L-8187 | [3] | LOCKWASHER (SMALL) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | SEE HOSE FABRICATION GUIDE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13560807
3G-9668: VALVE GP-CONTROL
3G9668 VALVE GP
PIN PULLER CONTROL
PART OF 7G5124 CONTROL AR-HYDRAULIC
AN ATTACHMENT
PIN PULLER CONTROL
PART OF 7G5124 CONTROL AR-HYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0372 C | [1] | WASHER | |
| 2. | 1U-0373 C | [1] | CAP | |
| 3. | 1U-0374 C | [1] | WASHER | |
| 4. | 9J-5702 | [1] | BUSHING | |
| 5. | 9J-5704 | [1] | PLUG | |
| 6. | 5L-6688 C | [1] | BUTTON-PLUG | |
| 7. | 9J-5705 | [1] | PLUG | |
| 8. | 9J-5706 | [1] | PLUNGER | |
| 9. | 9J-5696 | [1] | SPRING | |
| 10. | 9J-5698 | [1] | SPRING | |
| 11. | 9J-5699 | [1] | SPACER | |
| 12. | 9J-5694 | [1] | WASHER | |
| 13. | 1U-0375 C | [1] | RING | |
| THE FOLLOWING REPAIR | ||||
| KIT IS AVAILABLE: | ||||
| 9J-5708 | [1] | KIT-SEAL | ||
| (INCL SEALS & WASHER) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP13560808
4T-0140: PULLER GP-PIN
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4K-0684 CB | [1] | WASHER-HARD | |
| 2. | 9F-1720 | [2] | PIN | |
| 3. | 1A-1898 CB | [5] | WASHER | |
| 4. | 4T-1213 | [1] | LEVER | |
| 5. | 2K-1606 | [1] | PIN | |
| 3B-4639 | [2] | COTTER | ||
| 6. | 1D-4612 | [2] | BOLT | |
| 1D-5119 | [4] | NUT (JAM) | ||
| 7. | 1U-1205 | [2] | LINK | |
| 8. | 4T-0142 | [1] | PIN | |
| 9. | 3G-9367 | [2] | SPACER | |
| 10. | 3B-5313 C | [4] | COTTER 38.1MM(1.5IN)LG | |
| -OR- | ||||
| 3B-4639 C | [4] | COTTER 44.45MM(1.75IN)LG | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP13560809
9J-7623: MOUNTING GP-CYLINDER
9J7623 MOUNTING GP-CYLINDER
TYPE 1. JAPAN MARKET
PART OF 3G6088,3G6092,3G6090 BULLDOZER ARS
AN ATTACHMENT
TYPE 1. JAPAN MARKET
PART OF 3G6088,3G6092,3G6090 BULLDOZER ARS
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-9067 | [1] | HANDLE | |
| 2. | 9J-7625 | [4] | CAP AS | |
| 9J-7625 | CAP AS (EACH INCLUDES) | |||
| 3. | 9J-5284 | [1] | BEARING-SLEEVE | |
| 4. | 9J-7624 | [2] | YOKE | |
| 5. | 5D-1972 | [6] | BOLT | |
| 1B-4331 | [8] | NUT | ||
| 6. | 5P-5520 | [2] | SEAL-LIP TYPE | |
| 7. | 9J-8961 | [2] | PIN | |
| 8. | 031-9099 | [2] | BOLT | |
| 9. | 5P-6652 | [4] | WASHER | |
| 5P-6652 | WASHER 44.5MM | |||
| 5P-6652 | WASHER -OR- | |||
| 5P-8248 | [6] | WASHER-HARD | ||
| 5P-8248 | WASHER-HARD 36.5MM |
Information:
Caterpillar Parts SIS Catalog D8L :
Truck sale:
250,617 USD
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
