8N5810 ENGINE ARRANGEMENT-PART 2 OF 2 SAE OPPOSITE STANDARD ENGINE ROTATION SERIAL NO. 95Y1 TO 95Y620 INCLUSIVE NOTE: WHEN ORDERING PARTS GIVE ENGINE ARRANGEMENT AND SERIAL NUMBER 3508

8N5810 ENGINE ARRANGEMENT-PART 2 OF 2
SAE OPPOSITE STANDARD ENGINE ROTATION
SERIAL NO. 95Y1 TO 95Y620 INCLUSIVE
NOTE: WHEN ORDERING PARTS GIVE ENGINE ARRANGEMENT AND SERIAL NUMBER

SEBP13590010 SEBP1359

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name


		COOLING SYSTEM

7N-8719 Y	[1]	WATER PUMP GROUP
7N-8721 Y	[1]	OIL COOLER GROUP
7N-8720 Y	[1]	WATER LINES GROUP
8N-7716 Y	[1]	WATER LINES GROUP-AFTERCOOLER

		INTAKE AND EXHAUST SYSTEM

7N-8641 Y	[1]	EXHAUST MANIFOLD GROUP
7N-8913 Y	[1]	TURBOCHARGER GROUP
		SERIAL NO. 95Y1 TO 95Y618 INCLUSIVE
1W-7581 Y	[1]	TURBOCHARGER GROUP
		SERIAL NO. 95Y619 TO 95Y620 INCLUSIVE
7N-8722 Y	[1]	WATER AFTERCOOLER GROUP
7N-8626 Y	[1]	AIR LINES GROUP
		SERIAL NO. 95Y1 TO 95Y618 INCLUSIVE
1W-9619 Y	[1]	AIR LINES GROUP
		SERIAL NO. 95Y619-UP
8N-9557 Y	[1]	AIR SHUT-OFF GROUP
		SERIAL NO. 95Y1 TO 95Y618 INCLUSIVE
5N-2068 Y	[1]	AIR SHUT-OFF GROUP
		SERIAL NO. 95Y619-UP

		FUEL SYSTEM AND GOVERNOR

8N-7724 Y	[8]	FUEL INJECTION PUMP GROUP
8N-6151 Y	[1]	FUEL TRANSFER PUMP GROUP
7N-8728 Y	[1]	FUEL INJECTION CONTROL GROUP
8N-9853 Y	[1]	FUEL PRIMING PUMP GROUP
8N-7726 Y	[1]	FUEL FILTER GROUP
7N-8672 Y	[1]	FUEL INJECTION LINES GROUP
8N-9635 Y	[1]	GOVERNOR GROUP
7N-4869 Y	[1]	MANUAL SHUT-OFF GROUP
8N-4927 Y	[1]	MECHANICAL SHUT-OFF GROUP
8N-1471 Y	[1]	TACHOMETER DRIVE GROUP
8N-9228 Y	[1]	SERVICE METER GROUP


		NOTE: REFER TO INDEX FOR PAGE LOCATION
		OF GASKET KITS
Y		SEPARATE ILLUSTRATION

#SEBP13590011

7N-8706: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7N8706 CYLINDER BLOCK GROUP-PART 1
SERIAL NO. 95Y1 TO 95Y618 INCLUSIVE
8N9549 BLOCK PARTS ARE SHOWN ON PAGE 10

c234524 SEBP1359

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-0683	[2]	DOWEL
2.	7N-2044	[2]	DOWEL
3.	7N-2047	[3]	DOWEL
4.	2J-6274	[3]	SEAL
5.	8N-9549 Y	[1]	BLOCK ASSEM.
	Y		SEPARATE ILLUSTRATION

#SEBP13590012

7N-8706: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7N8706 CYLINDER BLOCK GROUP-PART 2
SERIAL NO. 95Y1 TO 95Y618 INCLUSIVE

c235383 SEBP1359

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1N-4755	[1]	JET ASSEM.
			(Includes)
	4D-0514	[1]	PLUG
2.	2M-4453	[16]	SEAL
3.	8N-6864	[8]	PLATE
4.	7N-2038	[8]	GASKET
5.	4N-1650	[16]	DOWEL
6.	7N-2049	[8]	DOWEL
7.	6F-6673	[2]	SEAL
8.	8N-8056	[2]	COVER
9.	0T-0102	[8]	BOLT
10.	5M-2894	[10]	WASHER
11.	0S-1585	[2]	BOLT
12.	5P-8245	[2]	WASHER
13.	1A-2029	[2]	BOLT
14.	1W-4188	[8]	RETAINER ASSEM.
15.	7N-2042	[3]	PLUG
16.	8S-0768	[4]	SEAL
17.	2B-0858	[4]	PLUG
18.	1B-5174	[2]	PLUG
19.	7H-3171	[20]	PLUG
20.	8N-1848	[8]	PLUG
	5H-7370	[8]	SEAL
21.	1W-5420	[1]	ADAPTER
22.	7N-5641	[2]	PLUG
	5F-9657	[4]	SEAL
23.	5M-6213 H	[6]	PLUG
24.	1B-2790	[8]	BOLT
	9M-1974	[8]	WASHER
25.	7N-2048	[10]	BEARING
	H		USE AS REQUIRED

#SEBP13590013

7N-8706: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7N8706 CYLINDER BLOCK GROUP-PART 1 OF 2
SERIAL NO. 95Y619 TO 95Y639 INCLUSIVE
2W290-PAGE 11A

c310371 SEBP1359

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-0683	[2]	DOWEL
2.	7N-2044	[2]	DOWEL
3.	7N-2047 C	[3]	DOWEL
4.	2J-6274	[3]	SEAL-O-RING
5.	2W-0290	[1]	CYLINDER BLOCK GP
	C		CHANGE FROM PREVIOUS TYPE

#SEBP13590014

7N-8706: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7N8706 CYLINDER BLOCK GROUP-PART 2 OF 2
SERIAL NO. 95Y619 TO 95Y639 INCLUSIVE

c337240 SEBP1359

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-8598 C	[8]	JET AS-OIL COOLING
			(EACH INCLUDES)
	4D-0514	[1]	PLUG-PIPE
2.	2M-4453	[16]	SEAL-O-RING
3.	8N-6864	[8]	PLATE-SPACER
4.	7N-2038	[8]	GASKET-PLATE
5.	8T-0099 C	[16]	DOWEL
6.	7N-2049	[8]	DOWEL
7.	6F-6673	[2]	SEAL-O-RING
8.	8N-8056	[2]	COVER
9.	0T-0102	[8]	BOLT
10.	5M-2894	[10]	WASHER
11.	0S-1595 C	[2]	BOLT
12.	5P-8245	[2]	WASHER
13.	1A-2029	[2]	BOLT
14.	1W-4188	[8]	RETAINER AS-JET
15.	7N-2048	[10]	BEARING-CAMSHAFT
16.	5M-6213 B	[6]	PLUG
17.	2B-0858 C	[3]	PLUG-PIPE
18.	1B-5174	[2]	PLUG-PIPE
19.	7H-3171	[20]	PLUG-PIPE
20.	2W-2940 C	[8]	PLUG-OIL MANIFOLD
	6V-3348 C	[8]	SEAL-O-RING
21.	1B-2790	[8]	BOLT
	9M-1974	[8]	WASHER
22.	7N-5641	[2]	PLUG-MANIFOLD
	5F-9657	[4]	SEAL-O-RING
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP13590015

2W-8240: CYLINDER BLOCK GP

CYLINDER BLOCK GP

2W8240 CYLINDER BLOCK GROUP
SERIAL NO. 95Y640-UP
2W8239-PAGE 11A.01

c333174 SEBP1359

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-8239 Y	[1]	CYLINDER BLOCK AS
2.	9M-1974	[8]	WASHER
3.	5P-8245 B	[1]	WASHER
4.	1A-2029	[1]	BOLT
5.	1B-5174	[2]	PLUG-PIPE
6.	5M-6213	[5]	PLUG
7.	2W-2940	[8]	PLUG-OIL MANIFOLD
8.	7N-2044	[2]	DOWEL
9.	2B-0858	[3]	PLUG-PIPE
10.	5M-2894	[9]	WASHER
11.	7N-2047	[3]	DOWEL
12.	2J-6274	[3]	SEAL-O-RING
13.	1W-8598	[8]	JET AS-OIL COOLING
14.	0T-0102	[8]	BOLT
15.	7N-2048	[10]	BEARING-CAMSHAFT
16.	4N-0683	[2]	DOWEL
17.	7H-3171	[20]	PLUG-PIPE
18.	0S-1585 B	[1]	BOLT
19.	8T-0099	[16]	DOWEL
20.	7N-5641	[2]	PLUG-MANIFOLD
21.	7N-2049	[8]	DOWEL
22.	2M-4453	[16]	SEAL-O-RING
23.	7N-2038	[8]	GASKET-PLATE
24.	8N-6864	[8]	PLATE-SPACER
25.	5F-9657	[4]	SEAL-O-RING
26.	6F-6673	[1]	SEAL-O-RING
27.	0S-1585	[1]	BOLT
28.	5P-8245	[1]	WASHER
29.	8N-8056	[1]	COVER
30.	6V-3348	[8]	SEAL-O-RING
31.	1W-4188	[8]	RETAINER AS-JET
	6V-3537	[1]	DOWEL
32.	1B-2790	[8]	BOLT
33.	5M-6213 B	[1]	PLUG
34.	6F-6673 B	[1]	SEAL-O-RING
35.	8N-8056 B	[1]	COVER
36.	1A-2029 B	[1]	BOLT
37.	5M-2894 B	[1]	WASHER
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

#SEBP13590016

8N-9549: CYLINDER BLOCK AS

CYLINDER BLOCK AS

8N9549 CYLINDER BLOCK ASSEMBLY
SERIAL NO. 95Y1 TO 95Y618 INCLUSIVE. REPLACED BY 1N2932 SHOWN ON PAGE 11
PART OF 7N8706 CYLINDER BLOCK GROUP SHOWN ON PAGE 8

c235384 SEBP1359

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-4707	[8]	BAND
2.	8N-6861	[8]	LINER
3.	7N-2046	[24]	SEAL
4.	1N-2933	[1]	BLOCK ASSEM.
			(Includes)
5.	8N-8216	[5]	CAP
6.	5P-8288	[20]	BOLT
	5P-8248	[20]	WASHER

#SEBP13590017

1N-2932: CYLINDER BLOCK GP

CYLINDER BLOCK GP

1N2932 CYLINDER BLOCK GROUP-FIELD INSTALLATION
SERIAL NO. 95Y1 TO 95Y618 INCLUSIVE

c235385 SEBP1359

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7H-3171	[20]	PLUG-PIPE
2.	7N-5641	[2]	PLUG-MANIFOLD
	5F-9657	[4]	SEAL-O-RING
3.	2B-0858	[4]	PLUG-PIPE
4.	1W-5420	[1]	ADAPTER
5.	8S-0768	[4]	SEAL-O-RING
6.	1N-2933	[1]	CYLINDER BLOCK AS
7.	8N-8216	[5]	CAP-CRANKSHAFT BEARING
8.	5P-8288	[20]	BOLT
	5P-8248	[20]	WASHER-HARD
9.	7N-2042	[3]	PLUG
10.	1B-5174	[2]	PLUG-PIPE
11.	7N-2048	[10]	BEARING-CAMSHAFT
12.	8N-1848	[8]	PLUG-O MANIFOLD
	5H-7370	[8]	SEAL-O-RING
13.	5M-6213 B	[6]	PLUG
	B		USE AS REQUIRED

#SEBP13590018

2W-0290: CYLINDER BLOCK GP

CYLINDER BLOCK GP

2W0290 CYLINDER BLOCK GROUP
SERIAL NO. 95Y619 TO 95Y639 INCLUSIVE
PART OF 7N8706 CYLINDER BLOCK
FOR FIELD REPLACEMENT ORDER 2W0291-PAGE 11B

c310373 SEBP1359

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-4707	[8]	BAND-FILLER
2.	8N-6861	[8]	LINER-CYLINDER
3.	7N-2046 CY	[24]	SEAL-O-RING
4.	2W-0291	[1]	CYLINDER BLOCK GP
5.	8N-8216	[5]	CAP-CRANKSHAFT BEARING
6.	5P-8288	[20]	BOLT
	5P-8248	[20]	WASHER-HARD
7.	7N-2042	[3]	PLUG
	8S-0768	[3]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP13590019

2W-8239: CYLINDER BLOCK AS

CYLINDER BLOCK AS

2W8239 CYLINDER BLOCK GROUP
SERIAL NO. 95Y640-UP
PART OF 2W8240 CYLINDER BLOCK
FOR FIELD REPLACEMENT ORDER 2W8241-PAGE 11C

c402995 SEBP1359

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-4707	[8]	BAND-FILLER
2.	5P-8248 C	[20]	WASHER-HARD
3.	5P-8288	[20]	BOLT
4.	8N-8216	[5]	CAP-CRANKSHAFT BEARING
5.	7N-2042	[3]	PLUG
6.	8S-0768	[4]	SEAL-O-RING
7.	1W-5420	[1]	ADAPTER
8.	8N-6861	[8]	LINER-CYLINDER
9.	7N-2046	[24]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Engine Replacement
1982/04/07

Reference Chart for Engine Improvements
1982/11/10

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26

Engine Rotation Can Be Changed On 3500 Series Engines
1985/08/01

Uprated 3500 Series Engines Now Available
1986/02/01

Alternator/Generator Output Test On The Engine
1987/05/01

Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01

Dynamometer Testing of Electronic Engines{1000}
1995/10/01

New Engine News Special Edition, Product Support Update-3500 Diesel Commercial Engines, SEBD9243 Is Available{1000}
1997/05/01

Troubleshooting Data Sheet For Diesel Engines {1000}
1997/08/01

Process Changes Result In Improved 3500 Engine Remanufactured Connecting Rod Assembly{1218}
1998/03/01

Revised Maintenance Schedules For 3500 Diesel Commercial Engines {0374,1000}
1999/10/01

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1978/01/18

New Engine News Format {0374}
1999/12/01

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/01

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2002/02/01

WEB Sites Are Available On The Internet For Products That Are Manufactured At The Large Engine Center {1000}
2002/03/01

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/04/01

New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01

Responsibilities for Emission Certified Engines {1000}
2005/10/03

Troubleshooting Engines with Mechanical Unit Injection (MUI) {1000, 1254}
2006/01/02

Storage Procedures Exist for Caterpillar Products {1000, 7000}
2008/12/08

How Is Service Information Accessed / Used {1000}
2009/04/27

Proper Storage Procedures for Commercial Engines {0355, 1000}
2009/12/03

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Operation and Maintenance Manual

Engine - Clean
3500 Industrial and Generator Set Engines

Starting the Engine
3500 Industrial and Generator Set Engines

Welding on Engines with Electronic Controls
3500 Industrial and Generator Set Engines

Special Instruction

Using 6V9433 Crankshaft Removal Group{1000, 1202}
Using 6V9433 Crankshaft Removal Group{1000, 1202}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}

Procedure for Cleaning an Engine that is Saturated with Water{1000}
Procedure for Cleaning an Engine that is Saturated with Water{1000}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}

Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}

Specifications

Engine Design
3500 Industrial Engines

Tool Operating Manual

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Testing and Adjusting

Engine Rotation
3500 Industrial Engines

Troubleshooting
3500 Industrial Engines

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Industrial Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Industrial Engine {0372, 1000, 7000, 753S, 7565}

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Engine Replacement{1000}
1982/03/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Analyzing A Major Engine Failure{1000}
1982/07/19

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

Engine Rotation Can Be Changed On 3500 Series Engines{1000}
1985/08/05

Uprated 3500 Series Engines Now Available{1000}
1986/01/27

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

Replacing 6.25" Bore Marine Engines and 6.25" Bore Petroleum Engines With The 3500 Family Of Engines{1000}
1988/02/22

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01

New Service Magazine Special Edition (Product Support Update-3500 Machine Engines) Available {1000}
1997/05/05

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 3508 :

8N-5810 ENGINE AR

7W-7649 CONVERSION AR

4W-2156 CONVERSION AR

4W-2157 CONVERSION AR

7N-8704 ENGINE AR

7N-8706 CYLINDER BLOCK GP

2W-8240 CYLINDER BLOCK GP

8N-9549 CYLINDER BLOCK AS

1N-2932 CYLINDER BLOCK GP

2W-0290 CYLINDER BLOCK GP

Truck sale:

61,000

Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY

307.208

Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS

84,962

Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.

Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction

145.548

Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung