AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3508 GENERATOR SET ENGINE 23Z00001-01022 BASIC ENGINE Caterpillar SIS



GEN SET ENGINE 3508 GEN SET ENGINE 23Z
 3508 GENERATOR SET ENGINE 23Z00001-01022 SEBP1360 3508 23Z   (1981)

Parts group 3508:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP
8N8360 AIR COMPRESSOR GROUP-BELT DRIVEN-PART 1-TYPE 1
FOR USAGE REFER TO 8N7500 CHART SHOWN ON PAGE 29
AN ATTACHMENT
AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP
8N8360 AIR COMPRESSOR GROUP-BELT DRIVEN-PART 2-TYPE 1
1W8495 COMPRESSOR PARTS ARE SHOWN ON PAGE 138
FOR USAGE REFER TO 8N7500 CHART SHOWN ON PAGE 29. AN ATTACHMENT
AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP
8N8360 AIR COMPRESSOR GROUP-BELT DRIVEN-PART 1-TYPE 2
FOR USAGE REFER TO 8N7500 CHART SHOWN ON PAGE 29
AN ATTACHMENT
AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP
8N8360 AIR COMPRESSOR GROUP-BELT DRIVEN-PART 2-TYPE 2
1W8495 COMPRESSOR PARTS ARE SHOWN ON PAGE 138
FOR USAGE REFER TO 8N7500 CHART SHOWN ON PAGE 29. AN ATTACHMENT
AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP
8N8360 AIR COMPRESSOR GROUP-BELT DRIVEN-PART 1-TYPE 3
REFER TO 8N7500 CHART ON PAGE 29
AN ATTACHMENT
AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP
8N8360 AIR COMPRESSOR GROUP-BELT DRIVEN-PART 2-TYPE 3
1W8495 - PAGE 138
REFER TO 8N7500 CHART PAGE 29. AN ATTACHMENT
AIR COMPRESSOR GP
1W-8495 AIR COMPRESSOR GP
1W8495 AIR COMPRESSOR GROUP
PART OF 8N8360 AIR COMPRESSOR GROUP SHOWN ON PAGE 137, 137B & 137D
AN ATTACHMENT
BALANCER GP
BALANCER GP
7N-8711 BALANCER GP
7N8711 BALANCER GROUP
SERIAL NO. 23Z954-UP
BALANCER GP
7N-8711 BALANCER GP
7N8711 BALANCER GROUP
SERIAL NO. 23Z1 TO 23Z953 INCLUSIVE
CAMSHAFT GP
CAMSHAFT GP
7N-8732 CAMSHAFT GP
7N8732 CAMSHAFT GROUP
SERIAL NO. 23Z1 TO 23Z675 INCLUSIVE
CAMSHAFT GP
7N-8732 CAMSHAFT GP
7N8732 CAMSHAFT GROUP
SERIAL NO. 23Z676 TO 23Z871 INCLUSIVE.
CAMSHAFT GP-SINGLE
4W-9708 CAMSHAFT GP-SINGLE
4W9708 SINGLE CAMSHAFT GROUP
ENGINE SERIAL NO.23Z872-UP.
CLUTCH GP
CLUTCH GP
3N-4130 CLUTCH GP
3N4130 CLUTCH GROUP-TYPE 1
3N4128-PAGE 38.04
PART OF 5N2847 FRONT POWER TAKE-OFF. AN ATTACHMENT
CLUTCH GP
3N-4130 CLUTCH GP
3N4130 CLUTCH GROUP-TYPE 2
3N4128-PAGE 38.04
PART OF 5N2847 FRONT POWER TAKE-OFF. AN ATTACHMENT
CLUTCH AS
3N-4128 CLUTCH AS
3N4128 CLUTCH ASSEMBLY
PART OF 3N4130 CLUTCH
AN ATTACHMENT
CLUTCH GP-FLYWHEEL
2N-7079 CLUTCH GP-FLYWHEEL
2N7079 FLYWHEEL CLUTCH ASSEMBLY
PART OF 8L6384 REAR CLUTCH POWER TAKE OFF
AN ATTACHMENT
CLUTCH GP-FLYWHEEL
7L-7759 CLUTCH GP-FLYWHEEL
7L7759 FLYWHEEL CLUTCH ASSEMBLY-SIDE VIEW
PART OF 7L7760 ENCLOSED CLUTCH
AN ATTACHMENT
CLUTCH GP-FLYWHEEL
7L-7759 CLUTCH GP-FLYWHEEL
7L7759 FLYWHEEL CLUTCH ASSEMBLY-END VIEW
PART OF 7L7760 ENCLOSED CLUTCH
AN ATTACHMENT
COUPLING GP
MOUNTING GP-ENGINE FLEXIBLE
8N-9567 MOUNTING GP-ENGINE FLEXIBLE
8N9567 ENGINE FLEXIBLE MOUNTING GROUP
FOR USE WITH GENERATOR SET RAILS, CANNOT BE USED WITH RADIATOR
AN ATTACHMENT
GUARD GP-COUPLING
3N-5765 GUARD GP-COUPLING
3N5765 FLYWHEEL COUPLING GUARD GROUP
AN ATTACHMENT
COUPLING AR-SHAFT TO SHAFT
3N-8996 COUPLING AR-SHAFT TO SHAFT
3N8996 COUPLING ARRANGEMENT-SHAFT TO SHAFT
PROVIDES A COUPLING FOR DRIVING 2-GE752 GENERATORS IN TANDEM. IF A.C.
GENERATOR IS COUPLED TO GE752, 1-3N8676 GUARD & 1-3N5596 HUB IS REQUIRED.
3N8647 FASTENER, 3N8677 GUARD. 5N3764 COUPLING & 3N5620 SPACER PARTS ARE
SHOWN ON PAGES 60A, 62, 63 & 64. AN ATTACHMENT
FASTENER GP-COUPLING
3N-8647 FASTENER GP-COUPLING
3N8647 COUPLING FASTENER GROUP
PROVIDES NECESSARY HARDWARE TO MOUNT 3N5596 FLEXIBLE COUPLING HUB FOR USE
IN BETWEEN GENERATORS, TANDEM SHAFTS OR TAPER SHAFT GE752 GENERATOR. ALSO
PART OF 3N8996 COUPLING ARRANGEMENT SHOWN ON PAGE 60. AN ATTACHMENT
COUPLING GP-FLEXIBLE
5N-8574 COUPLING GP-FLEXIBLE
5N8574 FRONT COUPLING GROUP
3N8647 FASTENER, 3N8677 GUARD AND 5N3764 FLEXIBLE COUPLING PARTS ARE
SHOWN ON PAGES 60, 62 & 63
AN ATTACHMENT
GUARD GP-COUPLING
3N-8676 GUARD GP-COUPLING
3N8676 COUPLING GUARD GROUP-BAND
PART OF 3N8677 COUPLING GUARD GROUP SHOWN ON PAGE 62
AN ATTACHMENT
GUARD GP-COUPLING
3N-8677 GUARD GP-COUPLING
3N8677 COUPLING GUARD GROUP
PART OF 3N8996 COUPLING ARRANGEMENT AND 5N8574 FRONT COUPLING GROUP SHOWN
ON PAGES 60 & 61. 3N8676 COUPLING GUARD PARTS ARE SHOWN ON PAGE 62. AN
ATTACHMENT
COUPLING GP-FLEXIBLE
5N-3765 COUPLING GP-FLEXIBLE
5N3765 FLEXIBLE COUPLING GROUP-VISCOUS DAMPER
FOR USE WITH "00" FLYWHEEL & FLYWHEEL HOUSING. AN ATTACHMENT
COUPLING GP-FLEXIBLE
5N-3764 COUPLING GP-FLEXIBLE
5N3764 FLEXIBLE COUPLING GROUP-VISCOUS DAMPER
PART OF 3N8996 COUPLING ARRANGEMENT & 5N8574 FRONT COUPLING GROUP SHOWN
ON PAGES 60 & 61. AN ATTACHMENT
SPACER GP-DISC
3N-5620 SPACER GP-DISC
3N5620 DISCONNECT SPACER GROUP
PART OF 3N8996 COUPLING
AN ATTACHMENT
COUPLING GP-GENERATOR
8N-7152 COUPLING GP-GENERATOR
8N7152 GENERATOR COUPLING GROUP
AN ATTACHMENT
COUPLING GP-GENERATOR
5N-2912 COUPLING GP-GENERATOR
5N912 GENERATOR COUPLING GROUP
PART OF 5N1681 GENERATOR INSTALLATION ARRANGEMENT LISTED ON PAGE 293
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
7N-8707 CRANKSHAFT GP
7N8707 CRANKSHAFT GROUP
SERIAL NO. 23Z1 TO 23Z510 INCLUSIVE
CRANKSHAFT GP
7N-8707 CRANKSHAFT GP
7N8707 CRANKSHAFT GP
S/N 23Z511-UP
FOR FIELD REPLACEMENT OF 7W0210 CRANKSHAFT ORDER 9Y3798 CRANKSHAFT
SEAL GP-CRANKSHAFT
7N-1854 SEAL GP-CRANKSHAFT
7N1854 CRANKSHAFT SEAL GROUP
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
CYLINDER BLOCK GP
CYLINDER BLOCK GP
7N-8706 CYLINDER BLOCK GP
7N8706 CYLINDER BLOCK GROUP-PART 1
SERIAL NO. 23Z1 TO 23Z472 INCLUSIVE
8N9549 CYLINDER BLOCK PARTS ARE SHOWN ON PAGE 10
CYLINDER BLOCK GP
7N-8706 CYLINDER BLOCK GP
7N8706 CYLINDER BLOCK GROUP-PART 2
SERIAL NO. 23Z1 TO 23Z472 INCLUSIVE
CYLINDER BLOCK GP
7N-8706 CYLINDER BLOCK GP
7N8706 CYLINDER BLOCK GROUP-PART 1 OF 2
SERIAL NO. 23Z473 TO 23Z953 INCLUSIVE
2W0290-PAGE 10A
CYLINDER BLOCK GP
7N-8706 CYLINDER BLOCK GP
7N8706 CYLINDER BLOCK GROUP-PART 2 OF 2
SERIAL NO. 23Z473 TO 23Z953 INCLUSIVE
CYLINDER BLOCK GP
2W-8240 CYLINDER BLOCK GP
2W8240 CYLINDER BLOCK GROUP
SERIAL NO. 23Z954-UP
2W8239-PAGE 10A.01
CYLINDER BLOCK AS
8N-9549 CYLINDER BLOCK AS
8N9549 CYLINDER BLOCK ASSEMBLY
SERIAL NO. 23Z1 TO 23Z472 INCLUSIVE
PART OF 7N8706 CYLINDER BLOCK GROUP SHOWN ON PAGE 8
FOR FIELD REPLACEMENT ORDER 1N2932 SHOWN ON PAGE 10B
CYLINDER BLOCK GP
2W-0290 CYLINDER BLOCK GP
2W0290 CYLINDER BLOCK GROUP
SERIAL NO. 23Z473 TO 23Z953 INCLUSIVE
PART OF 7N8706 CYLINDER BLOCK
FOR FIELD REPLACEMENT ORDER 2W0291-PAGE 10C
CYLINDER BLOCK AS
2W-8239 CYLINDER BLOCK AS
2W8239 CYLINDER BLOCK GROUP
SERIAL NO. 23Z954-UP
PART OF 2W8240 CYLINDER BLOCK
FOR FIELD REPLACEMENT ORDER 2W8241-PAGE 10D
CYLINDER BLOCK GP
1N-2932 CYLINDER BLOCK GP
1N2932 CYLINDER BLOCK GROUP-FIELD INSTALLATION
SERIAL NO. 23Z1 TO 23Z472 INCLUSIVE
PROVIDES FIELD REPLACEMENT FOR 8N9549 SHOWN ON PAGE 10
CYLINDER BLOCK GP
2W-0291 CYLINDER BLOCK GP
2W0291 CYLINDER BLOCK GROUP-FIELD INSTALLATION-TYPE 1
SERIAL NO. 23Z473 TO 23Z953 INCLUSIVE
PROVIDES FIELD REPLACEMENT FOR 2W0290-PAGE 10A
CYLINDER BLOCK GP
2W-0291 CYLINDER BLOCK GP
2W0291 CYLINDER BLOCK GROUP-FIELD INSTALLATION-TYPE 2
SERIAL NO. 23Z473 TO 23Z953 INCLUSIVE
FIELD REPLACEMENT FOR 2W290-PAGE 10A
CYLINDER BLOCK GP
2W-8241 CYLINDER BLOCK GP
2W8241 CYLINDER BLOCK GROUP - FIELD INSTALLATION
SERIAL NO. 23Z954-UP
PROVIDES FIELD REPLACEMENT FOR 2W8239
COVER GP-CYLINDER BLOCK
7N-8633 COVER GP-CYLINDER BLOCK
7N8633 CYLINDER BLOCK COVER GROUP
SERIAL NO. 23Z1 TO 23Z433 INCLUSIVE
COVER GP-CYLINDER BLOCK
7N-8633 COVER GP-CYLINDER BLOCK
7N8633 CYLINDER BLOCK COVER GROUP
SERIAL NO. 23Z434 TO 23Z675 INCLUSIVE
COVER GP-CYLINDER BLOCK
7N-8633 COVER GP-CYLINDER BLOCK
7N8633 CYLINDER BLOCK COVER GROUP
SERIAL NO. 23Z676-UP
VALVE AR-EXPLOSION RELIEF
5N-4830 VALVE AR-EXPLOSION RELIEF
5N4830 CRANKCASE EXPLOSION RELIEF VALVE ARRANGEMENT
AN ATTACHMENT
CYLINDER HEAD GP
CYLINDER HEAD GP
8N-7173 CYLINDER HEAD GP
8N7173 CYLINDER HEAD GROUP
8N7172 CYLINDER HEAD PARTS ARE SHOWN ON PAGE 17
CYLINDER HEAD GP
8N-7172 CYLINDER HEAD GP
8N7172 CYLINDER HEAD GROUP*R
PART OF 8N7173 CYLINDER HEAD GROUP
CYLINDER HEAD GP
2W-5803 CYLINDER HEAD GP
2W5803 CYLINDER HEAD GROUP
2W5802-PAGE 17.02
CYLINDER HEAD GP
7W-2447 CYLINDER HEAD GP
7W2447 CYLINDER HEAD GROUP
2W5802-PAGE 17.02
CYLINDER HEAD GP
7W-2234 CYLINDER HEAD GP
7W2234 CYLINDER HEAD GROUP
7W2233-PAGE 17.04
CYLINDER HEAD GP
2W-5802 CYLINDER HEAD GP
2W5802 CYLINDER HEAD GROUP*R
PART OF 2W5803 & 7W2447 CYLINDER HEAD
FIELD REPLACEMENT ORDER 4W1900-PAGE 17.03
CYLINDER HEAD AS
4W-1900 CYLINDER HEAD AS
4W1900 CYLINDER HEAD ASSEMBLY*R
PART OF 7W0707 CYLINDER HEAD GROUP
FIELD REPLACEMENT FOR 2W5802-PAGE 17.02
CYLINDER HEAD GP
7W-2233 CYLINDER HEAD GP
7W2233 CYLINDER HEAD GROUP
PART OF 7W2234 CYLINDER HEAD
DAMPER GP
GUARD GP-DAMPER
8N-9639 GUARD GP-DAMPER
8N9639 DAMPER GUARD GROUP
SERIAL NO. 23Z1 TO 23Z898, 23Z945 & 23Z946 INCLUSIVE
DAMPER GP
8N-7182 DAMPER GP
8N7182 DAMPER GROUP
GUARD GP-DAMPER
8N-9639 GUARD GP-DAMPER
8N9639 DAMPER GUARD GROUP
SERIAL NO. 23Z899 TO 23Z944 & 23Z947-UP
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
7N-4871 DRIVE GP-ACCESSORY
7N4871 ACCESSORY DRIVE GROUP-UPPER R.H. MOUNTED
ALSO AVAILABLE AS AN ATTACHMENT
DRIVE GP-ACCESSORY
8N-9166 DRIVE GP-ACCESSORY
8N9166 ACCESSORY DRIVE GROUP-UPPER L.H. MOUNTED
FOR USE WITH 8N9167 ACCESSORY DRIVE GROUP SHOWN ON PAGE 32
FOR USAGE REFER TO 8N7500 CHART SHOWN ON PAGE 29. AN ATTACHMENT
DRIVE GP-ACCESSORY
8N-9167 DRIVE GP-ACCESSORY
8N9167 ACCESSORY DRIVE GROUP-LOWER L.H. MOUNTED-TYPE 1
FOR USAGE REFER TO 8N7500 CHART SHOWN ON PAGE 29
AN ATTACHMENT
DRIVE GP-ACCESSORY
8N-9167 DRIVE GP-ACCESSORY
8N9167 ACCESSORY DRIVE GROUP-LOWER L.H. MOUNTED-TYPE 2
FOR USAGE REFER TO 8N7500 CHART SHOWN ON PAGE 29
AN ATTACHMENT
DRIVE GP-ACCESSORY
7N-7428 DRIVE GP-ACCESSORY
7N7428 ACCESSORY DRIVE GROUP-SHUT-OFF-TYPE 1
REFER TO 5N5382 CHART-PAGE 232
AN ATTACHMENT
DRIVE GP-ACCESSORY
7N-7428 DRIVE GP-ACCESSORY
7N7428 ACCESSORY DRIVE GROUP-SHUT OFF-TYPE 2
REFER TO 5N5382 CHART-PAGE 232
AN ATTACHMENT
COVER GP-ACCESSORY DRIVE HSG
8N-4263 COVER GP-ACCESSORY DRIVE HSG
8N4263 ACCESSORY DRIVE HOUSING COVER GROUP-R.H. MOUNTED
PART OF 8N6485, 8N6477, 8N6479, 1W5020, 1W5021, 1W5022,
1W5023 & 2W8583 WOODWARD GOVERNORS
AN ATTACHMENT
COVER GP-ACCESSORY DRIVE
8N-4266 COVER GP-ACCESSORY DRIVE
8N4266 ACCESSORY DRIVE COVER GROUP-FRONT R.H. MOUNTED
FOR USE WITH ALTERNATOR & L.H. GOVERNOR
AN ATTACHMENT
DRIVE GP-AUXILIARY
CHART-AUXILIARY DRIVE
8N-7500 CHART-AUXILIARY DRIVE
8N7500 AUXILIARY DRIVE CHART-GEAR & INSTALLATION INFORMATION
AN ATTACHMENT
SHAFT GP-AUXILIARY DRIVE
7N-8042 SHAFT GP-AUXILIARY DRIVE
7N8042 AUXILIARY DRIVE SHAFT GROUP
FOR USAGE REFER TO 8N7500 CHART SHOWN ON PAGE 29
AN ATTACHMENT
SHAFT GP-STUB
5N-2324 SHAFT GP-STUB
5N2324 STUB SHAFT GROUP-FRONT-FULL H.P.
AN ATTACHMENT
SHAFT GP-STUB
5N-2323 SHAFT GP-STUB
5N2323 STUB SHAFT GROUP-REAR
FOR USE WITH SAE "00" FLYWHEEL HOUSING
AN ATTACHMENT
SHAFT GP-STUB
7N-7660 SHAFT GP-STUB
7N7660 STUB SHAFT GROUP
ALSO PART OF 8N6163, 8N6438, 8N6442, 8N6458, 8N6416, 8N6420, 8N6415,
8N6437, 8N6441,8N6419, 4W6876, 7W1448 FAN DRIVES
REFER TO 8N7500 CHART-PAGE 29. AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
8N-6438 DRIVE GP-FAN
8N6438 FAN DRIVE GROUP-BELT-SUCTION-.562 RATIO
FOR USE WITH 1372 MM (54") DIAMETER FAN. 7N7660 STUB SHAFT AND 8N6560 FAN
DRIVE PARTS ARE SHOWN ON PAGE 50 & 51. AN ATTACHMENT
DRIVE GP-FAN
8N-6163 DRIVE GP-FAN
8N6163 FAN DRIVE GROUP-BELT-SUCTION-.513 RATIO
FOR USE WITH 8N9418 BELT TIGHTENER GROUP SHOWN ON PAGE 43. 7N7660 STUB
SHAFT AND 8N6560 FAN DRIVE PARTS ARE SHOWN ON PAGE 50 & 51. AN ATTACHMENT
DRIVE GP-FAN
8N-6458 DRIVE GP-FAN
8N6458 FAN DRIVE GROUP-BELT-BLOWER OR SUCTION-.513 RATIO
7N7660 STUB SHAFT PARTS ARE SHOWN ON PAGE 50. AN ATTACHMENT
DRIVE GP-FAN
8N-6442 DRIVE GP-FAN
8N6442 FAN DRIVE GROUP-BELT-SUCTION-.696 RATIO
FOR USE WITH 1372 MM (54") DIAMETER FAN. 7N7660 STUB SHAFT & 8N6560 FAN
DRIVE PARTS ARE SHOWN ON PAGES 50 & 51. AN ATTACHMENT
DRIVE GP-FAN
8N-6420 DRIVE GP-FAN
8N6420 FAN DRIVE GROUP-BELT
FOR USE WITH 1168 MM (46") DIAMETER FAN
7N7660 STUB SHAFT & 8N6560 FAN DRIVE PARTS ARE SHOWN ON PAGES 50 & 51
AN ATTACHMENT
DRIVE GP-FAN
8N-6416 DRIVE GP-FAN
8N6416 FAN DRIVE GROUP-BELT
FOR USE WITH 1168 MM (46") DIAMETER FAN. 7N7660 STUB SHAFT AND 8N6560 FAN
DRIVE PARTS ARE SHOWN ON PAGES 50 & 51. AN ATTACHMENT
DRIVE GP-FAN
8N-6437 DRIVE GP-FAN
8N6437 FAN DRIVE GROUP-BELT-BLOWER .562 RATIO
FOR USE WITH 1372 MM (54") DIAMETER FAN. 7N7660 STUB SHAFT & 8N6559 FAN
DRIVE PARTS ARE SHOWN ON PAGES 50 & 52. AN ATTACHMENT
DRIVE GP-FAN
8N-6415 DRIVE GP-FAN
8N6415 FAN DRIVE GROUP-BELT
FOR USE WITH 1168 MM (46") DIAMETER FAN. 7N7660 STUB SHAFT & 8N6559 FAN
DRIVE PARTS ARE SHOWN ON PAGES 50 & 52. AN ATTACHMENT
DRIVE GP-FAN
8N-6419 DRIVE GP-FAN
8N6419 FAN DRIVE GROUP-BELT-BLOWER-.782 RATIO
FOR USE WITH 1168 MM (46") DIAMETER FAN. 7N7660 STUB SHAFT & 8N6559 FAN
DRIVE PARTS ARE SHOWN ON PAGES 50 & 52. AN ATTACHMENT
DRIVE GP-FAN
8N-6441 DRIVE GP-FAN
8N6441 FAN DRIVE GROUP-BELT-BLOWER-.696 RATIO
FOR USE WITH 1372 MM (54") DIAMETER FAN. 7N7660 STUB SHAFT & 8N6559 FAN
DRIVE PARTS ARE SHOWN ON PAGES 50 & 52. AN ATTACHMENT
DRIVE GP-FAN
7W-1448 DRIVE GP-FAN
7W1448 DRIVE GP-FAN BELT
7N7660-PAGE 50
BELT-BLOWER-.339 RATIO
AN ATTACHMENT
DRIVE GP-FAN
4W-6876 DRIVE GP-FAN
4W6876 FAN BELT DRIVE GROUP-BLOWER OR SUCTION
7N7660-PAGE 50
FOR USE WITH F SIZE RADIATOR & GEN SET ARRANGEMENT AT 750 KW RATING
AN ATTACHMENT
DRIVE GP-FAN
8N-6560 DRIVE GP-FAN
8N6560 FAN DRIVE GROUP-TYPE 1
PART OF 8N6163, 8N6438, 8N6442, 8N6416 & 8N6420 FAN DRIVES
AN ATTACHMENT
DRIVE GP-FAN
8N-6560 DRIVE GP-FAN
8N6560 FAN DRIVE GROUP-SUCTION-TYPE 2
PART OF 8N6416, 8N6163, 8N6420, 8N6438 & 8N6442 FAN DRIVES
AN ATTACHMENT
DRIVE GP-FAN
8N-6559 DRIVE GP-FAN
8N6559 FAN DRIVE GROUP-BLOWER-TYPE 1
PART OF 8N6415, 8N6437, 8N6441 & 8N6419 FAN DRIVES
AN ATTACHMENT
DRIVE GP-FAN
8N-6559 DRIVE GP-FAN
8N6559 FAN DRIVE GROUP-BLOWER-TYPE 2
PART OF 8N6415, 8N6419, 8N6437 & 8N6441 FAN DRIVES
AN ATTACHMENT
DRIVE GP-PUMP
MOUNTING GP-HYD PUMP DRIVE
5N-2462 MOUNTING GP-HYD PUMP DRIVE
5N2462 HYDRAULIC PUMP DRIVE MOUNTING GROUP
REPLACED BY 7W0283-PAGE 38.06. PROVIDES MOUNTING FOR HYDRAULIC
PUMP DRIVE WITH CUTOFF CLUTCH THAT DOES NOT REQUIRE A PILOT BEARING
NOT FOR USE WITH SAE REVERSE ROTATION ENGINE, FRONT STUB SHAFT,
AUXILIARY DRIVE CRANKSHAFT PULLEY OR RADIATOR FAN DRIVE. AN ATTACHMENT
MOUNTING GP-HYD PUMP DRIVE
7W-0283 MOUNTING GP-HYD PUMP DRIVE
7W0283 HYDRAULIC PUMP DRIVE MOUNTING GROUP
AN ATTACHMENT
FLYWHEEL GP
GEAR GP-REAR
7N-8671 GEAR GP-REAR
7N8671 REAR GEAR GROUP
SERIAL NO. 23Z1 TO 23Z727 INCLUSIVE
GEAR GP-REAR
4W-5520 GEAR GP-REAR
4W5520 REAR GEAR GROUP
SERIAL NO. 23Z728 TO 23Z953 INCLUSIVE
GEAR GP-REAR
4W-5520 GEAR GP-REAR
4W5520 REAR GEAR GROUP
SERIAL NO. 23Z954-UP
FLYWHEEL GP
7N-7784 FLYWHEEL GP
7N7784 FLYWHEEL GROUP
SAE "0" STANDARD ENGINE ROTATION
FLYWHEEL GP
7N-4851 FLYWHEEL GP
7N4851 FLYWHEEL GROUP
GEAR GP
GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
8N7174 FRONT TIMING GEAR GROUP
SERIAL NO. 23Z1 TO 23Z484 INCLUSIVE
GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
8N7174 FRONT TIMING GEAR GROUP
SERIAL NO. 23Z485-UP
GEAR GP-REAR
7N-8671 GEAR GP-REAR
7N8671 REAR GEAR GROUP
SERIAL NO. 23Z1 TO 23Z727 INCLUSIVE
GEAR GP-REAR
4W-5520 GEAR GP-REAR
4W5520 REAR GEAR GROUP
SERIAL NO. 23Z728 TO 23Z953 INCLUSIVE
GEAR GP-REAR
4W-5520 GEAR GP-REAR
4W5520 REAR GEAR GROUP
SERIAL NO. 23Z954-UP
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
8N-8113 HOUSING GP-FLYWHEEL
8N8113 FLYWHEEL HOUSING GROUP
SERIAL NO. 23Z1 TO 23Z690 INCLUSIVE
HOUSING GP-FLYWHEEL
8N-8113 HOUSING GP-FLYWHEEL
8N8113 FLYWHEEL HOUSING GROUP
SERIAL NO. 23Z691-UP
HOUSING GP-FLYWHEEL
8N-8112 HOUSING GP-FLYWHEEL
8N8112 FLYWHEEL HOUSING GROUP-TYPE 1
SAE "0" STANDARD ENGINE ROTATION
AN ATTACHMENT
HOUSING GP-FLYWHEEL
8N-8112 HOUSING GP-FLYWHEEL
8N8112 FLYWHEEL HOUSING GROUP-TYPE 2
SAE"0"STANDARD ENGINE ROTATION
AN ATTACHMENT
COVER GP-FLYWHEEL HOUSING
7N-4852 COVER GP-FLYWHEEL HOUSING
7N4852 FLYWHEEL HOUSING COVER GROUP
ALSO AN ATTACHMENT
COVER GP-FLYWHEEL HOUSING
4W-1529 COVER GP-FLYWHEEL HOUSING
4W1529 REAR STRUCTURE COVER GROUP
COVER GP-FLYWHEEL HOUSING
4W-1528 COVER GP-FLYWHEEL HOUSING
4W1528 COVER GP-FLYWHEEL HOUSING
TYPE 1
FOR USE WITH SAE "0" FLYWHEEL HOUSING
AN ATTACHMENT
COVER GP-FLYWHEEL HOUSING
4W-1528 COVER GP-FLYWHEEL HOUSING
4W1528 COVER GP-FLYWHEEL HOUSING
TYPE 2
FOR USE WITH SAE "0" FLYWHEEL HOUSING
AN ATTACHMENT
COVER GP-FLYWHEEL HOUSING
7N-9539 COVER GP-FLYWHEEL HOUSING
7N9539 COVER GP-FLYWHEEL HOUSING
TYPE 1
FOR USE WITH SAE "0" FLYWHEEL HOUSING
AN ATTACHMENT
COVER GP-FLYWHEEL HOUSING
7N-9539 COVER GP-FLYWHEEL HOUSING
7N9539 COVER GP-FLYWHEEL HOUSING
TYPE 2
FOR USE WITH SAE "0" FLYWHEEL HOUSING
AN ATTACHMENT
HOUSING GP-FRONT
HOUSING GP-FRONT
8N-8111 HOUSING GP-FRONT
8N8111 FRONT HOUSING GROUP
SERIAL NO. 23Z1 TO 23Z891 INCLUSIVE
HOUSING GP-FRONT
8N-8111 HOUSING GP-FRONT
8N8111 FRONT HOUSING GROUP
SERIAL NO. 23Z892-UP
COVER GP-FRONT HOUSING
8N-9642 COVER GP-FRONT HOUSING
8N9642 FRONT HOUSING COVER GROUP
SERIAL NO. 23Z1 TO 23Z725 INCLUSIVE
COVER GP-FRONT HOUSING
8N-9642 COVER GP-FRONT HOUSING
8N9642 FRONT HOUSING COVER GROUP
SERIAL NO. 23Z726-UP
LIFTING GP-ENGINE
LIFTING GP
8N-7734 LIFTING GP
8N7734 LIFTING EYE GROUP
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE FLEXIBLE
8N-9567 MOUNTING GP-ENGINE FLEXIBLE
8N9567 ENGINE FLEXIBLE MOUNTING GROUP
FOR USE WITH GENERATOR SET RAILS, CANNOT BE USED WITH RADIATOR
AN ATTACHMENT
TRUNNION GP-ENGINE
7N-1863 TRUNNION GP-ENGINE
7N1863 TRUNNION GROUP
AN ATTACHMENT
SUPPORT GP-ENGINE
2W-6607 SUPPORT GP-ENGINE
2W6607 ENGINE SUPPORT GROUP-FRONT-TRUNNION-UG8
NOT FOR USE WITH JACKET WATER HEATER,SUMP PUMP,ENGINE SUPPORT RAILS
FRONT CLUTCH,HYDRAULIC PUMP DRIVE MOUNTING.
AN ATTACHMENT
MOUNTING GP-ENGINE
2W-1774 MOUNTING GP-ENGINE
2W1774 ENGINE MOUNTING GROUP-FLEXIBLE
FOR USE WITH 3508 MARINE GENERATOR SET WITH GENERATOR SET RAILS AND WITH
OR WITHOUT RADIATOR. AN ATTACHMENT
MOUNTING GP-ENGINE
7W-7548 MOUNTING GP-ENGINE
7W7548 MOUNTING GP-ENGINE
FOR USE WITH SPRING ISOLATORS & DEEP OIL PAN
AN ATTACHMENT
PAN GP-OIL
COVER GP-OIL PAN
7W-6401 COVER GP-OIL PAN
7W6401 COVER GROUP-OIL PAN
PROVIDES A CAST IRON COVER TO BE USED IN PLACE OF ALUMINUM COVER
AN ATTACHMENT
PAN GP-OIL
7N-6902 PAN GP-OIL
7N6902 OIL PAN GROUP
SERIAL NO. 23Z1 TO 23Z492 INCLUSIVE
PAN GP-OIL
7N-6902 PAN GP-OIL
7N6902 OIL PAN GROUP
SERIAL NO. 23Z493-UP
PAN GP-OIL
2W-8525 PAN GP-OIL
2W8525 OIL PAN GROUP - TYPE 1
AN ATTACHMENT
PAN GP-OIL
2W-8525 PAN GP-OIL
2W8525 OIL PAN GROUP - TYPE 2
AN ATTACHMENT
PAN GP-OIL
7N-8713 PAN GP-OIL
7N8713 OIL PAN GROUP-FRONT SUMP-PART 1 OF 2-TYPE 1
AN ATTACHMENT
PAN GP-OIL
7N-8713 PAN GP-OIL
7N8713 OIL PAN GROUP-FRONT SUMP-PART 2 OF 2-TYPE 1
AN ATTACHMENT
PAN GP-OIL
7N-8713 PAN GP-OIL
7N8713 OIL PAN GROUP-FRONT SUMP-PART 1 OF 2-TYPE 2
AN ATTACHMENT
PAN GP-OIL
7N-8713 PAN GP-OIL
7N8713 OIL PAN GROUP-FRONT SUMP-PART 2 OF 2-TYPE 2
AN ATTACHMENT
PAN GP-OIL
7N-8713 PAN GP-OIL
7N8713 OIL PAN GROUP-FRONT SUMP-PART 1 OF 2-TYPE 3
AN ATTACHMENT
PAN GP-OIL
7N-8713 PAN GP-OIL
7N8713 OIL PAN GROUP-FRONT SUMP-PART 2 OF 2-TYPE 3
AN ATTACHMENT
PAN GP-OIL
7N-8713 PAN GP-OIL
7N8713 FRONT SUMP OIL PAN GROUP-PART 1
AN ATTACHMENT
PAN GP-OIL
7N-8713 PAN GP-OIL
7N8713 FRONT SUMP OIL PAN GROUP-PART 2
AN ATTACHMENT
PISTON & ROD GP
PISTON & ROD GP
8N-7952 PISTON & ROD GP
8N7952 CONNECTING ROD AND PISTON GROUP-8 REQUIRED
PISTON & ROD GP
4W-7573 PISTON & ROD GP
4W7573 CONNECTING ROD & PISTON GROUP-8 REQUIRED
SERIAL NO. 23Z676-UP
FOR USE WITH 3500 ENGINE STANDBY GENERATOR SET
AN ATTACHMENT
PISTON & ROD GP
2W-9041 PISTON & ROD GP
2W9041 CONNECTING ROD AND PISTON GROUP-8 REQUIRED
POWER TAKE-OFF GP
POWER TAKE-OFF GP-REAR
8L-6384 POWER TAKE-OFF GP-REAR
8L6384 REAR CLUTCH PTO GROUP
2N7079 FLYWHEEL CLUTCH ASSEMBLY PARTS ARE SHOWN ON PAGE 39
AN ATTACHMENT
POWER TAKE-OFF GP
7L-7760 POWER TAKE-OFF GP
7L7760 ENCLOSED CLUTCH GROUP
7L7759-PAGE 40. AN ATTACHMENT
POWER TAKE-OFF GP-FRONT
7W-0281 POWER TAKE-OFF GP-FRONT
7W0281 TAKE-OFF GP-POWER-FRONT
CLUTCH
3N4130-PAGE 38.02
AN ATTACHMENT
POWER TAKE-OFF GP-FRONT
5N-2847 POWER TAKE-OFF GP-FRONT
5N2847 TAKE-OFF GP-POWER-FRONT
REPLACED BY 7W0281-PAGE 38.01. 3N4130-PAGE 38.02
NOT FOR USE WITH FRONT STUB SHAFT, RADIATOR FAN DRIVE, AUXILIARY DRIVE
CRANKSHAFT PULLEY. AN ATTACHMENT
PULLEY GP
PULLEY GP-AUXILIARY DRIVE
8N-8468 PULLEY GP-AUXILIARY DRIVE
8N8468 AUXILIARY DRIVE PULLEY GROUP-2 GROOVE
FOR USAGE REFER TO 8N7500 CHART SHOWN ON PAGE 29
AN ATTACHMENT
SHAFT GP-STUB
SHAFT GP-STUB
5N-2324 SHAFT GP-STUB
5N2324 STUB SHAFT GROUP-FRONT-FULL H.P.
AN ATTACHMENT
SHAFT GP-STUB
5N-2323 SHAFT GP-STUB
5N2323 STUB SHAFT GROUP-REAR
FOR USE WITH SAE "00" FLYWHEEL HOUSING
AN ATTACHMENT
SHAFT GP-STUB
7N-7660 SHAFT GP-STUB
7N7660 STUB SHAFT GROUP
ALSO PART OF 8N6163, 8N6438, 8N6442, 8N6458, 8N6416, 8N6420, 8N6415,
8N6437, 8N6441,8N6419, 4W6876, 7W1448 FAN DRIVES
REFER TO 8N7500 CHART-PAGE 29. AN ATTACHMENT
GUARD GP-STUB SHAFT
3N-7779 GUARD GP-STUB SHAFT
3N7779 STUB SHAFT GUARD GROUP
AN ATTACHMENT
SERPENTINE/V-BELTS
GUARD GP-BELT
8N-3581 GUARD GP-BELT
8N3581 BELT GUARD GROUP-ALTERNATOR & VEE BELT-R.H. MOUNTED-TYPE 2
AN ATTACHMENT
GUARD GP-BELT
8N-3581 GUARD GP-BELT
8N3581 BELT GUARD GROUP-ALTERNATOR & VEE BELT-R.H. MOUNTED-TYPE 1
AN ATTACHMENT
GUARD GP-BELT
8N-6486 GUARD GP-BELT
8N6486 BELT GUARD GROUP-TYPE 1
FOR USE WITH D & E SIZE RADIATOR
AN ATTACHMENT
GUARD GP-BELT
8N-6486 GUARD GP-BELT
8N6486 BELT GUARD GROUP-TYPE 2
REPLACED BY 2W2486-PAGE 211C
FOR USE WITH D & E SIZE RADIATORS
AN ATTACHMENT
GUARD GP-BELT
2W-2486 GUARD GP-BELT
2W2486 BELT GUARD GROUP - REPLACED BY 7W7214-PAGE 211D
FOR USE WITH D & E SIZE RADIATORS
AN ATTACHMENT
GUARD GP-BELT
7W-7214 GUARD GP-BELT
7W7214 BELT GUARD GROUP - TYPE 1
FOR USE WITH FOLDED CORE RADIATOR
AN ATTACHMENT
GUARD GP-BELT
7W-7214 GUARD GP-BELT
7W7214 BELT GUARD GROUP - TYPE 2
FOR USE WITH FOLDED CORE RADIATOR
AN ATTACHMENT
VALVE MECHANISM GP
VALVE MECHANISM GP
7N-1858 VALVE MECHANISM GP
7N1858 VALVE MECHANISM GROUP-8 REQUIRED
SERIAL NO. 23Z1 TO 23Z675 INCLUSIVE
VALVE MECHANISM GP
7N-1858 VALVE MECHANISM GP
7N1858 VALVE MECHANISM GROUP-8 REQUIRED
SERIAL NO. 23Z676-UP
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
7N1855 VALVE MECHANISM COVER GROUP-8 REQUIRED
SERIAL NO. 23Z1 TO 23Z811 INCLUSIVE
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
7N1855 VALVE MECHANISM COVER GROUP
SERIAL NO. 23Z812-UP

Information:

(For parts list, see above)

Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
The Connecting Rod On The Air Compressor Is Now Serviceable {1803}
2002/05/01
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Disassembly and Assembly
Air Starting Motor - Disassemble
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Engine News
The Timing Marks Have Been Improved On The Front and Rear Balancer Gears {1220}
2001/11/01
Specifications
Balancer Group (Front)
3500 Generator Set Engines
Disassembly and Assembly
Balancer Group (Front) - Remove and Install - 3508 Engine
3508, 3512 and 3516 Generator Set Engines
Engine News
Improved V-Belts For Alternator
1986/10/01
New Design Alternator Belt Used
1989/09/01
Specifications
Belt Tension Chart
3500 Generator Set Engines
Service Magazine
Improved V-Belts For Alternator{1405}
1986/09/22
New Fan Drives Used{1358}
1987/03/02
New Design Alternator Belt Used{1405,1406}
1989/09/18
New Spacer Used In Alternator Belt Guard Group{7168}
1989/10/23
New Alternator Drive Pulley Seal Used With New Drive Pulley; Poly-Vee Belt Can Be Installed {1425,1357}
1990/11/12
Engine News
Reusability Of Camshaft Rollers And Roller Followers
1982/09/22
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18
New Camshaft Installation Tools Available
1985/09/01
New 8T2998 Lubricant Available
1986/03/01
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment
1986/06/01
Piston And Camshaft Changes
1987/10/01
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes
1990/06/01
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/11/01
New Sleeve Bearing Used In Camshaft Idler Gear Assembly In Rear Gear Groups{1206}
1995/11/20
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
New Cover Seals are Available {1107, 1201, 1210}
2002/11/01
Quality of Remanufactured Camshafts {1210}
2003/07/01
Procedure for Installing the Camshaft Drive Gear {1212}
2005/12/12
Improved Hardware for the Camshaft Thrust Plate Is Used in Certain 3500 Engines {1204, 1210}
2013/01/28
Remanufactured Camshaft and Lifter Kits Are Available for Certain 3500B Engines {1209, 1210}
2013/09/20
Specifications
Camshafts
SUPPLEMENT FOR UPRATED 3500 ENGINES
Camshaft
3500 Generator Set Engines
Systems Operation
Camshaft
3500 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500 Engines
Camshaft Timing
3500 Engines
Disassembly and Assembly
Camshaft - Remove
3508, 3512 and 3516 Generator Set Engines
Camshaft - Install
3508, 3512 and 3516 Generator Set Engines
Camshaft Bearings - Remove
3508, 3512 and 3516 Generator Set Engines
Camshaft Bearings - Install
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area{1209,1208,1210}
1983/12/05
New Camshaft Installation Tools Available{0600}
1985/08/19
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Piston And Camshaft Changes{1214,1210,1200}
1987/10/12
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes{1209}
1990/06/04
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
1993/11/09
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Specifications
Power Take-Off Clutch - Front
3500 Generator Set Engines
Testing and Adjusting
Power Take-Off Clutch - Adjust
3500 Engines
Service Magazine
New Clutches For Rear Power Take-Off{3055,3054}
1983/02/14
Engine News
Engine Mounts Available To Provide Clearance For Deep Oil Pans
1986/12/01
Special Instruction SEHS8700 Available For Installation Of Engine Flexible Mounting Group
1990/07/01
Two Bearing Close Coupled Gensets Experience A Noise In The Coupling During Engine Shut Down {4456}
1998/11/01
Special Instruction
Installation of Flexible Mounting Groups{1152, 1353}
Installation of Flexible Mounting Groups{1152, 1353}
Installation Of 3N5620 Spacer Group Or 3N5573 Spacer Assembly{3252}
Installation Of 3N5620 Spacer Group Or 3N5573 Spacer Assembly{3252}
Maintenance and Inspection of the Rubber Element for the <NOBR>243-1520</NOBR> Flexible Coupling Gp, the <NOBR>247-0308</NOBR> Flexible Coupling Gp, the <NOBR>296-8050</NOBR> Flexible Coupling Gp, the <NOBR>309-1565</NOBR> Flexible Coupling Gp, the <NOBR>370-3967</NOBR> Flexible Coupling Gp, and the <NOBR>370-3968</NOBR> Flexible Coupling Gp. {1000, 3252, 4450}
Maintenance and Inspection of the Rubber Element for the 243-1520 Flexible Coupling Gp, the 247-0308 Flexible Coupling Gp, the 296-8050 Flexible Coupling Gp, the 309-1565 Flexible Coupling Gp, the 370-3967 Flexible Coupling Gp, and the 370-3968 Flexible Coupling Gp. {1000, 3252, 4450}
Assembly of the 5N-3765 Flexible Coupling Gp {3252, 4450}
Assembly of the 5N-3765 Flexible Coupling Gp {3252, 4450}
Specifications
Flexible Coupling
3500 Generator Set Engines
Reuse And Salvage Guidelines
Inspection of the Coupling Assembly for 3524 Engines {3279}
Inspection of the Coupling Assembly for 3524 Engines {3279}
Disassembly and Assembly
Coupling - Install
SR4 Generator with VR3 or VR4 Voltage Regulator
Coupling - Remove
SR4 Generator with VR3 or VR4 Voltage Regulator
Coupling - Remove
SR4 Generator with VR3 or VR4 Voltage Regulator
Service Magazine
Special Instruction SEHS8700 Available For Installation Of Engine Flexible Mounting Group{1152}
1990/06/18
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Crankshaft Positions For Injector Timing And Valve Clearance Settings
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Flange-Type Bushing Kits Available For Later Crankshaft Pulleys
1986/01/01
Use Of Crankshaft Seal Adapter Eliminated
1987/07/01
New Crankshaft Assembly Available For Parts Service
1988/02/01
New Wear Sleeve Available For Alternator Drive Pulley
1988/02/01
New Crankshaft Seal Adapter O-Ring Seal Is Made Of Higher Temperature Material
1989/02/01
New Crankshaft Thrust Plate Made Of Brass
1989/05/01
New Crankshaft Counterweight Bolt And Washer Used
1989/11/01
Crankshaft Wear Sleeve Has Smaller Inside Diameter{1160,1161}
1991/03/01
New Cylinder Blocks And Crankshafts Used
1991/04/01
Service Life of Crankshaft Gears Can Be Extended
1993/07/01
Improved Crankshaft Seal Groups Used
1993/10/01
Remanufactured Crankshaft Interchangeability; Remanufactured &quot;Upgrade To New&quot; (UTN) Availability {1202}
1994/10/01
New Crankshaft Damper Assembly Used {1205}
1995/04/01
Numbering The Crankshaft To Match Counterweights{1202,1231}
1995/10/01
New Counterweight Bolt Assembly Replaces Bolt And Washer {1231}
1998/07/01
Change In Location And Size Of Crankshaft Counterweight Sequence Number{1231,1202}
1998/12/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Be Sure To Use The Correct Procedure To Remove The Rear Crankshaft Seal And Wear Sleeve{1161}
1999/09/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2000/12/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2001/03/01
Be Sure To Check The Counterweights On The Engine Crankshaft For Counterweight Sequence Numbers {1231}
2001/08/01
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/18
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
Important Notice on Installation of Crankshaft Seals and Wear Sleeves {1160, 1161}
2009/02/23
New Front and Rear Crankshaft Seals Are Now Used on Certain 3500 and G3500 Engines {1160, 1161}
2015/07/10
New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Engines {1160}
New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Engines {1160}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3500 Industrial and Generator Set Engines
Special Instruction
Using 6V9433 Crankshaft Removal Group{1000, 1202}
Using 6V9433 Crankshaft Removal Group{1000, 1202}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Inspection of Crankshaft Main Bearings{1203}
Inspection of Crankshaft Main Bearings{1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Australia
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-CFEL
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-CSARL
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Americas
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Brazil
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Failure of the Connecting Rod Bearings on 3500 and 3600 Engines Due to Delamination {1219, 1225}
Failure of the Connecting Rod Bearings on 3500 and 3600 Engines Due to Delamination {1219, 1225}
Some 3508 Crankshafts May Be Manufactured with Trimmed Counterweight Ears{1202, 1231}
Some 3508 Crankshafts May Be Manufactured with Trimmed Counterweight Ears{1202, 1231}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Specifications
Crankshaft Wear Sleeves And Seals
SUPPLEMENT FOR UPRATED 3500 ENGINES
Crankshaft Wear Sleeves and Seals
3500 Generator Set Engines
Connecting Rod and Main Bearing Journals
3500 Generator Set Engines
Crankshaft
3500 Generator Set Engines
Service Letter-China
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Asia
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Systems Operation
Crankshaft
3500 Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500 Engines
Main Bearings
3500 Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500 Engines
Disassembly and Assembly
Bearing Clearance - Check
3508, 3512 and 3516 Generator Set Engines
Crankshaft Rear Seal and Wear Sleeve - Remove
3508, 3512 and 3516 Generator Set Engines
Crankshaft Rear Seal and Wear Sleeve - Install
3508, 3512 and 3516 Generator Set Engines
Crankshaft Front Seal and Wear Sleeve - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Crankshaft Main Bearings - Remove
3508, 3512 and 3516 Generator Set Engines
Crankshaft Main Bearings - Install
3508, 3512 and 3516 Generator Set Engines
Crankshaft - Remove
3508, 3512 and 3516 Generator Set Engines
Crankshaft - Install
3508, 3512 and 3516 Generator Set Engines
Service Magazine
6V3143 Distorter Adapter Available For Use With 5P7409 Wear Sleeve Distorter For Removal Of Crankshaft Wear Sleeves{0621,1202,1160,1161}
1980/09/08
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Specifications For Installation Of Crankshaft Counterweight Bolts{1202}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts{1202,1203,1218,1219,1230}
1984/03/12
Different Thread Lubricant Can Be Used On Connecting Rod And Counterweight Bolts{1202,1218}
1984/05/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bushing Kits Available For Crankshaft Pulleys{1205}
1985/12/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Of Crankshaft Seal Adapter Eliminated {1150,1160,1161}
1987/06/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Wear Sleeve Available For Alternator Drive Pulley{1400,1405}
1988/02/15
New Crankshaft Assembly Used{1202}
1988/02/22
New Alternator Drive Pulley Has Hardened Wear Sleeve; New Seal Used On Pulley{1425,1357}
1988/12/12
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Crankshaft Seal Adapter O-Ring Seal Is Made Of Higher Temperature Material{1160,1161}
1989/01/23
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used{1201}
1989/04/03
New Crankshaft Thrust Plate Made Of Brass {1232}
1989/05/08
New Crankshaft Counterweight Bolt And Washer Used{1231}
1989/10/23
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals{1204,1237,7568}
1990/04/02
Crankshaft Wear Sleeve Has Smaller Inside Diameter{1160,1161}
1991/02/25
New Cylinder Blocks And Crankshafts Used{1201,1202,1231}
1991/03/25
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
Service Life of Crankshaft Gears Can Be Extended{1204}
1993/07/26
New Crankshaft Seal Groups Prevent Oil Lip Damage {1160,1161}
1993/10/04
New Main Bearings Have Higher Fatigue Strength {1203,1200}
1993/10/04
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
New Copper Lead Main and Connecting Rod Bearings Are Available For All 3500 Diesel Machine Engines {1203, 1219}
2015/01/28
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts
1984/04/11
Crankcase Explosion Relief Valve Kit Available
1985/04/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Check Height Of Locating Dowels Before Installing Cylinder Head
1985/10/01
Checking Or Adjusting Valve Clearances
1986/01/01
Cylinder Liner Seat Insert Available
1986/05/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
New Piston Oil Cooling Jet Assembly Used
1987/01/01
Wider Main Bearing Cap And Higher Torque On Cap Bolts
1988/08/01
New Piston Cooling Jets Used
1988/09/01
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used
1989/04/01
New Viton Rubber Seals Used
1989/07/01
Stronger Spacer Plate Prevents Cracking
1989/08/01
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts
1989/11/01
New Cylinder Blocks And Crankshafts Used
1991/04/01
New Video Tape, SEVN1962, Shows Correct Procedures To Counterbore Top Deck Of Cylinder Block And Install Liner Insert
1991/08/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Main Bearings Have Higher Fatigue Strength
1993/09/01
New O-ring Seal Used On Cylinder Block Covers
1993/10/01
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/11/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
New Cylinder Blocks Made From Stronger Alloy{1201}
1994/12/01
&quot;Narrow Flange&quot; Cylinder Liner Available For Service Repair {1216,1201}
1995/03/01
Improved Spacer Plate Provides Visual Indication Of Use Of &quot;Wide Flange&quot; Cylinder Liners {1221}
1995/05/01
New Liner Seat Inserts Allow Cylinder Blocks With Deeper Liner Seat Cracks To Be Salvaged{1201,1217}
1995/07/01
5P-8665 Liner Puller Group Changed To Accommodate Cylinder Liner With Larger Diameter Top Flange{1216}
1995/09/01
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
Improved Cylinder Liner Has Longer Service Life{1216}
1997/05/01
Recommended Lubrication And Torque Procedure For Main Bearing Cap Bolts {1203}
1998/09/01
New Spacer Plate Gasket Provides Improved Sealing {1221}
1998/09/01
New Spacer Plate Gasket Provides Improved Sealing{1221}
1998/10/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
New Cover Seals are Available {1107, 1201, 1210}
2002/11/01
New Cylinder Liner {1216}
2003/05/01
The Cylinder Block Has Changed {1201}
2003/10/01
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
2010/06/25
A New Top Liner Seal Is Used on 3500 Engines {1201, 7555}
2010/12/16
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
2011/07/29
A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
2011/09/14
An Improved Inspection Process for Cylinder Liners Used in All 3500 Engines {1201, 1216}
2014/10/10
Cat<SUP>&reg;</SUP> Reman Has Added New Cylinder Block Groups for Certain 3500 and G3500 Commercial Engines {1000, 1201}
2014/10/31
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Engines {0705, 1201, 1217}
2014/12/05
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Installation of Service Replacement Cylinder Block Group{1201}
Installation of Service Replacement Cylinder Block Group{1201}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Ordering &quot;Series B&quot; Replacement Cylinder Blocks for 3500 Series Engines{1201}
Ordering "Series B" Replacement Cylinder Blocks for 3500 Series Engines{1201}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Inspection of Crankshaft Main Bearings{1203}
Inspection of Crankshaft Main Bearings{1203}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Installation of the 422-9537 Repair Kit {1233}
Installation of the 422-9537 Repair Kit {1233}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Service Letter-NACD
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Service Letter-Australia
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Service Letter-CFEL
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Service Letter-CSARL
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Service Letter-Americas
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Service Letter-Truck/Ag/Marine
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Technical Information Bulletin
Some Remanufactured Cylinder Packs for Series 3500 Engines Are Contaminated with Blasting Material{1213, 1239}
Some Remanufactured Cylinder Packs for Series 3500 Engines Are Contaminated with Blasting Material{1213, 1239}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Specifications
Oil Cooler Bypass And Cooling Jet Sequence Valves
SUPPLEMENT FOR UPRATED 3500 ENGINES
Cylinder Liner
3500 Generator Set Engines
Piston and Rings - Two-Piece Piston
3500 Generator Set Engines
Cylinder Block
3500 Generator Set Engines
Piston and Rings
3500 Generator Set Engines
Piston and Rings - One-Piece Piston
3500 Generator Set Engines
Connecting Rod
3500 Generator Set Engines
Service Letter-China
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Service Letter-Asia
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Systems Operation
Cylinder Block, Liners and Heads
3500 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Information Release Memo
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
CAT REMAN ANNOUNCES THE RELEASE OF REMAN 3500 BARE BLOCKS FOR 3508, 3512, 3516 AND 3524 APPLICATIONS
CAT REMAN ANNOUNCES THE RELEASE OF REMAN 3500 BARE BLOCKS FOR 3508, 3512, 3516 AND 3524 APPLICATIONS
Service Letter-APD
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
THE ENGINE CYLINDER BLOCK MAIN CAPS NEED TO BE INSPECTED ON CERTAIN 3508, 3512 AND 3516 GENERATOR SET, INDUSTRIAL, MARINE, LOCOMOTIVE MARINE AUXILIARY AND VEHICULAR ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CYLINDER LINERS IN CERTAIN 992G WHEEL LOADERS, 854G WHEEL TRACTORS, D11R TRACK TYPE TRACTORS, 777D, 777D HAA, 785C, 789C AND 793C OFF HIGHWAY TRUCKS, AND 3508, 3512, AND 3516 ENGINES
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500 Engines
Cylinder Block
3500 Engines
Cylinder Liner Projection
3500 Engines
Main Bearings
3500 Engines
Disassembly and Assembly
Bearing Clearance - Check
3508, 3512 and 3516 Generator Set Engines
Connecting Rod Bearings - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Spacer Plate - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Crankshaft Main Bearings - Remove
3508, 3512 and 3516 Generator Set Engines
Crankshaft Main Bearings - Install
3508, 3512 and 3516 Generator Set Engines
Piston Cooling Jets - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Cylinder Liner - Remove
3508, 3512 and 3516 Generator Set Engines
Cylinder Liner - Install
3508, 3512 and 3516 Generator Set Engines
Camshaft Bearings - Remove
3508, 3512 and 3516 Generator Set Engines
Camshaft Bearings - Install
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts{1202,1203,1218,1219,1230}
1984/03/12
Improved Vibration Damper Guard Group Has Flexible Mounting{1205,1200}
1985/04/01
Crankcase Explosion Relief Valve Kit Available{1200,1233}
1985/04/08
Correct Installation Of Oil Sequence Valves{1304}
1985/04/22
Check Height Of Locating Dowels Before Installing Cylinder Head{1201}
1985/10/07
Cylinder Liner Seat Insert Available{1217,1200}
1986/05/12
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
New Piston Oil Cooling Jet Assembly Used {1331}
1987/01/26
New Sealant Used On Oil Pan Mounting Bolts{1201,1302}
1987/07/06
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Piston And Camshaft Changes{1214,1210,1200}
1987/10/12
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Large Engine Blowby Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1988/06/20
Wider Main Bearing Cap And Higher Torque On Cap Bolts{1201}
1988/08/15
New Piston Cooling Jets Used{1331,1200}
1988/09/05
New Woodward Actuator Assembly (EG10P) Has Lower Relief Valve Setting{1289}
1988/10/17
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used{1201}
1989/04/03
New Viton Rubber Seals Used{1302,1307,1312,1306,1317,1200}
1989/07/10
Stronger Spacer Plate Prevents Cracking{1221,1350}
1989/07/24
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
New Cylinder Blocks And Crankshafts Used{1201,1202,1231}
1991/03/25
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
New Video Tape, SEVN1962, Shows Correct Procedures To Counterbore Top Deck Of Cylinder Block And Install Liner Insert {1201,0374,1216}
1991/07/22
New Steel Plunger Used In Oil Filter Relief Valve Plunger; Use 2P4005 Oil Filters Instead Of 1R0716 Oil Filters{1315,1318}
1992/07/13
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Main Bearings Have Higher Fatigue Strength {1203,1200}
1993/10/04
New O-ring Seal Used On Cylinder Block Covers {1200}
1993/10/11
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
1993/11/09
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Machine Engines {0705, 1201, 1217}
2014/12/05
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Changes To Valve Clearance Settings
1983/04/27
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
Crankshaft Positions For Injector Timing And Valve Clearance Settings
1983/11/30
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18
Check Cylinder Heads For Water Passage Plugs
1984/04/11
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal
1985/01/16
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Stronger Push Rod Used
1985/08/01
Valve Mechanism Groups Use New Lifter Assemblies
1985/08/01
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure
1985/09/01
Check Height Of Locating Dowels Before Installing Cylinder Head
1985/10/01
Checking Or Adjusting Valve Clearances
1986/01/01
Stronger Cylinder Heads Used
1986/02/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Check Oil Drain Hole In 0R2671 or 0R2621 Remanufactured Cylinder Heads If Head Used With Breather
1986/11/01
Improved Injector Clamp Eliminates Interference With Bridge
1987/03/01
Material Changed In Exhaust and Inlet Valves
1987/05/01
Improvements To Prevent Oil Leakage At Cylinder Heads
1987/12/01
Silicone Water Seals Reinstated In Cylinder Heads
1988/08/01
New Rocker Arm Shaft Assembly and Bolts Used
1988/09/01
Improved Valve Lifter Assemblies; Better Insert Retention
1989/02/01
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, and New Cylinder Head Assemblies Groups With New Inlet Valve Seats
1990/03/01
Valve Lifters Can Be Removed Without Removing Cylinder Heads
1990/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability
1990/11/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/01
Taller Water Seals Used In Cylinder Head Groups
1992/08/01
Correct Identification Of Rocker Arm Assembly Components
1992/10/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Cylinder Head Bolt Tightening Procedure
1992/12/01
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt
1992/12/01
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit
1993/02/01
Valve Seat Insert Removal Tools
1993/02/01
Use Molycoat Paste Lubricant On Cylinder Head Bolts
1993/07/01
New Cylinder Head Gasket Used
1993/09/01
Non-Counterbored Valve Guides Used{1104}
1994/03/01
Intake And Exhaust Valve Lash Increased{1105}
1994/07/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
New Exhaust Valve With Tapered Stem Used In Engine Cylinder Head Groups{1105}
1995/09/01
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
A Chamfer Has Been Added To Some Engine Cylinder Head Bolt Holes To Help Reduce Stress Concentrations And Prevent Cracks {1101}
1996/09/23
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
Improved Water Seal Reduces The Possibility Of Cylinder Head Joint Water Leaks {1100}
1998/01/20
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
Recommended Lubrication And Torque Procedure For Cylinder Head Bolts {1100}
1998/09/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}
1999/02/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
The Oil Seals Have Been Removed From The Exhaust Valves {1100}
2000/12/01
New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124}
2010/10/06
New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
2003/01/01
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2004/09/01
Oversized Valve Guides are Available {1104}
2005/01/31
Correction to Specifications "Cylinder Head Valves" {1108}
2005/03/21
Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/18
An Improved Outer Valve Spring is Used {1100, 1108}
2006/01/02
A New Cylinder Head Gasket is Used {1124}
2006/07/24
Use the Correct Parts in the Valve Train {1100}
2007/01/22
Improved Valve Components Are Used {1100, 1108}
2008/12/22
New Exhaust Valves Are Used in Diesel 3500 Commercial Engines {1100, 1105}
2014/01/13
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Cylinder Heads for 3500 and G3500 Engines {1100}
2015/05/01
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installation Of Service Cylinder Head Assembly{1101}
Installation Of Service Cylinder Head Assembly{1101}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-Brazil
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Truck/Ag/Marine
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Technical Information Bulletin
Installation Of New Cylinder Port Thermocouples
Installation Of New Cylinder Port Thermocouples
Machining Premachined Valve Seat Inserts
Machining Premachined Valve Seat Inserts
Failure of Reused Rotocoils in 3500 Engines{1100}
Failure of Reused Rotocoils in 3500 Engines{1100}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Specifications
Valve Rocker Arms, Lifters, And Bridges
SUPPLEMENT FOR UPRATED 3500 ENGINES
Cylinder Head Valves
3500 Generator Set Engines
Cylinder Head
3500 Generator Set Engines
Cylinder Head Valves
3500 Generator Set Engines
Cylinder Head
3500 Generator Set Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Systems Operation
Cylinder Block, Liners and Heads
3500 Engines
Valve System Components
3500 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Information Release Memo
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Testing and Adjusting
Valve Lash and Valve Bridge Adjustment
3500 Engines
Valve Lash Check
3500 Engines
Cylinder Heads
3500 Engines
Disassembly and Assembly
Cylinder Head - Remove
3508, 3512 and 3516 Generator Set Engines
Cylinder Head - Disassemble
3508, 3512 and 3516 Generator Set Engines
Cylinder Head - Assemble
3508, 3512 and 3516 Generator Set Engines
Cylinder Head - Install
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Changes To Valve Clearance Settings{0374,1105,1250}
1983/04/25
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Check Cylinder Heads For Water Passage Plugs{1100,0374}
1984/03/12
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
Check Height Of Locating Dowels Before Installing Cylinder Head{1201}
1985/10/07
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Stronger Cylinder Heads Used{1100}
1986/01/27
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Check Oil Drain Hole In OR2671 Or OR2621 Remanufactured Cylinder Heads If Head Used With Breather{1100,1300,1317}
1986/10/27
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Material Changed In Exhaust and Inlet Valves{1105}
1987/04/20
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Socket In Valve Rocker Arms Provides Lubrication For Inlet Valve Seats {1103,1105,1123}
1988/04/25
Silicone Water Seals Reinstated In Cylinder Heads{1115,1300}
1988/08/01
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Valve Lifter Assemblies; Better Insert Retention{1112}
1989/02/13
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, New Cylinder Head Assemblies With New Inlet Valve Seats {1100,1103,1104,1105}
1990/02/26
Valve Lifters Can Be Removed Without Removing Cylinder Heads {1112}
1990/07/02
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability{1124}
1990/10/29
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/01/28
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/11
Taller Water Seals Used In Cylinder Head Groups {1115}
1992/08/10
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
New Cylinder Head Bolt Tightening Procedure{1100}
1992/12/21
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit {1115}
1993/02/15
New Cylinder Head Gasket Used{1124}
1993/09/20
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
Engine News
Improved Vibration Damper Guard Group Has Flexible Mounting
1985/04/01
Damper Groups Improved To Help Prevent Leaks Of Viscous Fluids
1989/07/01
New, Larger Vibration Damper Improves Wear Life
1989/07/01
New Damper Guard Group Used
1993/04/01
New Crankshaft Damper Assembly Used {1205}
1995/04/01
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3500 Industrial and Generator Set Engines
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
Technical Information Bulletin
Damper Fluid Kits Are not Available Outside of the United States {1205}
Damper Fluid Kits Are not Available Outside of the United States {1205}
Specifications
Vibration Damper Groups
SUPPLEMENT FOR UPRATED 3500 ENGINES
Vibration Damper
3500 Generator Set Engines
Vibration Damper
3500 Generator Set Engines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Information Release Memo
REMANUFACTURED DAMPER FOR THE 3500 ENGINE
REMANUFACTURED DAMPER FOR THE 3500 ENGINE
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING VIBRATION DAMPERS DUE TO LEAKS FROM THE SEALING PLUG ON CERTAIN 3508, 3512, AND 3516 ENGINES; 777, 785, 789, AND 793 OFF HIGHWAY TRUCKS; 992, 994 WHEEL LOADERS; D11 TRACK-TYPE TRACTORS; 513
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
Testing and Adjusting
Vibration Damper
3500 Engines
Disassembly and Assembly
Vibration Damper - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Improved Vibration Damper Guard Group Has Flexible Mounting{1205,1200}
1985/04/01
Bushing Kits Available For Crankshaft Pulleys{1205}
1985/12/16
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Damper Groups Improved To Help Prevent Leaks Of Viscous Fluids{1205}
1989/06/26
New, Larger Vibration Damper Improves Wear Life{1205}
1989/07/10
New Damper Guard Group Used{7150}
1993/04/12
Engine News
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives
1987/04/01
Front Idler And Accessory Drive Gears Improved
1989/05/01
Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
2003/10/01
New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
2010/01/18
New Accessory Drives Are Used on Certain 3500 and G3500 Engines {1207}
2014/11/19
Technical Information Bulletin
Oil Leaks from the Accessory Drives of Certain 3500 and G3500 Engines{1207}
Oil Leaks from the Accessory Drives of Certain 3500 and G3500 Engines{1207}
Specifications
Accessory (Shutoff) Drive Group
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Accessory Drive (Upper Right Hand)
3500 Generator Set Engines
Disassembly and Assembly
Accessory Drive (Front) - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Accessory Drive (Front) - Disassemble
3508, 3512 and 3516 Generator Set Engines
Accessory Drive (Front) - Assemble
3508, 3512 and 3516 Generator Set Engines
Service Magazine
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives{1206,1207}
1987/04/06
Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
Engine News
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives
1987/04/01
Front Idler And Accessory Drive Gears Improved
1989/05/01
Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
2003/10/01
New Seal for the Front Housing {1151, 1207}
2004/06/01
Specifications
Accessory (Shutoff) Drive Group
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Auxiliary Drive Shaft
3500 Generator Set Engines
Auxiliary Drive Housing
3500 Generator Set Engines
Service Magazine
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives{1206,1207}
1987/04/06
Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
Engine News
New Washer And Bolts Keep Fan Drive Tight
1983/04/27
New Fan Drives Used
1987/03/01
Procedure for Tightening the Locknut for the Fan Drive on 3500 Engines {1359}
2003/04/01
Improved Fan Drives are Used {1359}
2007/03/05
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
2014/01/31
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
Operation and Maintenance Manual
Fan Drive Bearing - Lubricate
3500 Industrial and Generator Set Engines
Service Letter-NACD
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
Service Letter-Australia
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
Service Letter-CFEL
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
Service Letter-CSARL
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
Service Letter-Americas
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
Service Letter-China
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
Service Letter-Asia
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
Reuse And Salvage Guidelines
Specifications for Reusability of the <NOBR>251-7646</NOBR> Fan Drive Bracket Assembly on 3500 Machine Engines {1359}
Specifications for Reusability of the 251-7646 Fan Drive Bracket Assembly on 3500 Machine Engines {1359}
Service Letter-APD
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
Service Magazine
New Fan Drives Used{1358}
1987/03/02
Special Instruction
Oil Seal Replacement For Jacket Water Pumps{1361}
Oil Seal Replacement For Jacket Water Pumps{1361}
Disassembly and Assembly
Engine Oil and Water Pump Drive - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Engine Oil and Water Pump Drive - Disassemble
3508, 3512 and 3516 Generator Set Engines
Engine Oil and Water Pump Drive - Assemble
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Removal Of Water Pump Impeller {1361}
1982/11/29
New Water Pump Groups Have Improved Impellers And Shafts {1361,1364,1389}
1984/02/06
New Oil Seal For Water Pumps Has Hydrodynamic Grooves{1361,1389}
1988/11/21
Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15
Special Instruction
Oil Seal Replacement For Jacket Water Pumps{1361}
Oil Seal Replacement For Jacket Water Pumps{1361}
Technical Information Bulletin
Remanufactured Water Pump For 3500 Engine
Remanufactured Water Pump For 3500 Engine
Service Magazine
New Oil Seal For Water Pumps Has Hydrodynamic Grooves{1361,1389}
1988/11/21
Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Engine News
Two-Piece Guard For Alternator Fan And Belts
1982/05/12
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Gasket Removed From Flywheel Housing Cover Groups
1987/04/01
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives
1987/04/01
Front Idler And Accessory Drive Gears Improved
1989/05/01
Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals
1990/04/01
Rear Gear (Cam Drive) Groups Improved
1991/05/01
Correct Installation of Front Gear Train Idler Shaft{1237}
1994/11/01
New Flywheels Are Used {1156}
2003/08/01
Heavy Duty, Engine Turning Tool Released {0701, 1156, 1157}
2006/03/20
Improved Hardware for the Camshaft Thrust Plate Is Used in Certain 3500 Engines {1204, 1210}
2013/01/28
Service Letter-NACD
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Specifications
Rear Gear Group<BR> (3508)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Rear Gear Group<BR> (3512 &amp; 3516)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Flywheel
3500 Generator Set Engines
Service Letter-China
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Service Letter-APD
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Testing and Adjusting
Flywheel - Inspect
3500 Engines
Disassembly and Assembly
Flywheel - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Gasket Removed From Flywheel Housing Cover Groups{1157}
1987/03/23
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives{1206,1207}
1987/04/06
Use Of Crankshaft Seal Adapter Eliminated {1150,1160,1161}
1987/06/15
Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15
Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals{1204,1237,7568}
1990/04/02
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
Service Life of Crankshaft Gears Can Be Extended{1204}
1993/07/26
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Two Front Timing Gear Housings Available{1162,1150}
1987/02/23
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives{1206,1207}
1987/04/06
Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15

Truck sale:

Caterpillar 3508, Stationary Generator Sets, Construction
61,000 
Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
307.208 
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3508, Industrial engines, Construction
84,962 
Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction


 
145.548 
Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.