AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N1858 VALVE MECHANISM GROUP-8 REQUIRED SERIAL NO. 23Z1 TO 23Z675 INCLUSIVE 3508 GEN SET ENGINE


BASIC ENGINE
VALVE MECHANISM GP
LIFTING GP-ENGINE
VALVE MECHANISM GP
COUPLING GP
MOUNTING GP-ENGINE
ENCLOSURES, GUARDS AND BASES
RAIL GP

GEN SET ENGINE 3508 GEN SET ENGINE 23Z
 3508 GENERATOR SET ENGINE 23Z00001-01022 SEBP1360 3508 23Z   (1981)

BASIC ENGINE

VALVE MECHANISM GP
VALVE MECHANISM GP
7N-1858 VALVE MECHANISM GP
VALVE MECHANISM GP
7N-1858 VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
 

#SEBP13600040
 

7N-1858: VALVE MECHANISM GP

7N1858 VALVE MECHANISM GROUP-8 REQUIRED
SERIAL NO. 23Z1 TO 23Z675 INCLUSIVE
c301895 SEBP1360
7N1858 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8289 [2] BOLT  
2. 1W-2422 C [1] SHAFT ASSEM.  
  1W-2421 C [1] DOWEL  
3. 7N-3413 [3] SCREW  
  3J-9196 [3] NUT  
4. 8N-7290 C [2] ARM ASSEM.  
    (Each Includes)
5. 8N-7197 [1] SOCKET  
6. 1W-6326 C [1] BEARING  
7. 8N-7289 C [1] ARM ASSEM.  
  1W-6326 C [1] BEARING  
8. 8N-7197 [1] SOCKET  
9. 2N-5842 [2] SCREW  
  9L-7712 [2] NUT  
10. 8N-7292 C [2] BRIDGE ASSEM.  
    (Each Includes)
11. 8N-7191 [1] SEAT  
12. 8F-8858 [3] BUTTON  
13. 9F-7707 [3] RING  
14. 1W-1372 C [1] BASE ASSEM.  
15. 8N-4387 [2] DOWEL  
16. 8N-3969 [1] GASKET  
17. 1A-5964 [2] BOLT  
18. 5M-2894 [6] WASHER  
19. 2J-0157 C [2] SEAL  
20. 2W-3256 C [3] LIFTER ASSEM.  
21. 7N-4782 [3] SPRING  
22. 7N-3431 [3] ROD  
23. 0S-1590 [4] BOLT  
  C   INDICATES CHANGE
 

#SEBP13600041
 

7N-1858: VALVE MECHANISM GP

7N1858 VALVE MECHANISM GROUP-8 REQUIRED
SERIAL NO. 23Z676-UP
c510210 SEBP1360
7N1858 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8289 [2] BOLT-12 POINT HEAD  
2. 1W-2422 [1] SHAFT AS-ARMATURE  
  1W-2421 [1] DOWEL-HOLLOW  
3. 7N-3413 [3] SCREW-ADJUSTING  
  3J-9196 [3] NUT-JAM  
4. 8N-7290 [2] ARM AS-ROCKER  
    (EACH INCLUDES)
5. 8N-7197 [1] SOCKET-ARM  
6. 1W-6326 [1] BEARING  
7. 8N-7289 [1] ARM AS-ROCKER  
  1W-6326 [1] BEARING  
8. 8N-7197 [1] SOCKET-ARM  
9. 2N-5842 [2] SCREW  
  9L-7712 [2] NUT  
10. 8N-7292 [2] BRIDGE AS  
    (EACH INCLUDES)
11. 8N-7191 [1] SEAT-WEAR  
12. 8F-8858 [3] BUTTON  
13. 9F-7707 [3] RING-RETAINER  
14. 4W-7774 C [1] BASE AS-COVER  
15. 8N-4387 [2] DOWEL-HOLLOW  
16. 4W-7656 C [1] GASKET  
17. 0S-1590 [4] BOLT  
18. 5M-2894 [4] WASHER  
19. 2J-0157 [2] SEAL-O-RING  
20. 2W-3256 [3] LIFTER AS  
21. 7N-4782 [3] SPRING-LIFT GUIDE  
22. 7N-3431 [3] ROD-VALVE PUSH  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13600042
 

8N-7734: LIFTING GP

8N7734 LIFTING EYE GROUP
c602045 SEBP1360
8N7734 LIFTING GP Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8291 [4] BOLT  
2. 2B-2695 [4] BOLT  
  9N-0869 [4] WASHER  
3. 8N-2408 [2] CLIP  
4. 8N-2407 [2] CLIP  
5. 7N-2326 [2] EYE-LIFTING  
6. 7N-2328 [4] DOWEL  
7. 8N-8017 [4] BRACKET-LIFTING  
8. 6V-9995 [4] BOLT-12 POINT HD  
9. 5P-8248 [8] WASHER-HARD  
 

#SEBP13600043
 

7N-1855: COVER GP-VALVE MECHANISM

7N1855 VALVE MECHANISM COVER GROUP-8 REQUIRED
SERIAL NO. 23Z1 TO 23Z811 INCLUSIVE
c236244 SEBP1360
7N1855 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-8925 [4] BOLT (31.75MM LONG)  
    -OR-
  1A-9579 C [4] BOLT (38.1MM LONG)  
  7H-3937 C [4] LOCKWASHER  
2. 7N-2407 [1] COVER  
3. 5P-5678 D SEAL (.8M)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP13600044
 

7N-1855: COVER GP-VALVE MECHANISM

7N1855 VALVE MECHANISM COVER GROUP
SERIAL NO. 23Z812-UP
c333550 SEBP1360
7N1855 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-9579 [4] BOLT  
  9M-1974 C [4] WASHER  
2. 2W-8894 C [1] COVER  
3. 4W-1596 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13600045
 

8N-9567: MOUNTING GP-ENGINE FLEXIBLE

8N9567 ENGINE FLEXIBLE MOUNTING GROUP
FOR USE WITH GENERATOR SET RAILS, CANNOT BE USED WITH RADIATOR
AN ATTACHMENT
c228847 SEBP1360
8N9567 MOUNTING GP-ENGINE FLEXIBLE Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9970 [6] MOUNT AS  
2. 5P-7197 [6] WASHER  
 

#SEBP13600046
 

7N-1863: TRUNNION GP-ENGINE

7N1863 TRUNNION GROUP
AN ATTACHMENT
c588656 SEBP1360
7N1863 TRUNNION GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-4734 C [16] BOLT (50.80MM LG)  
2. 5P-8246 C [16] WASHER-HARD  
3. 8N-1287 [1] SUPPORT-OUTER  
4. 5P-8245 [20] WASHER  
5. 1D-4566 [20] BOLT (88.90MM LG)  
6. 9X-7438 [1] MOUNT AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13600047
 

2W-6607: SUPPORT GP-ENGINE

2W6607 ENGINE SUPPORT GROUP-FRONT-TRUNNION-UG8
NOT FOR USE WITH JACKET WATER HEATER,SUMP PUMP,ENGINE SUPPORT RAILS
FRONT CLUTCH,HYDRAULIC PUMP DRIVE MOUNTING.
AN ATTACHMENT
c319999 SEBP1360
2W6607 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-5514 [1] SUPPORT AS-TRUNNION  
2. 2W-5508 [2] BEARING  
3. 2W-5507 [1] SUPPORT-TRUNNION  
4. 1D-4566 [20] BOLT  
  5P-8245 [20] WASHER  
 

#SEBP13600048
 

2W-1774: MOUNTING GP-ENGINE

2W1774 ENGINE MOUNTING GROUP-FLEXIBLE
FOR USE WITH 3508 MARINE GENERATOR SET WITH GENERATOR SET RAILS AND WITH
OR WITHOUT RADIATOR. AN ATTACHMENT
c319281 SEBP1360
2W1774 MOUNTING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3757 [12] BOLT  
  5P-8249 [12] WASHER  
2. 2W-2180 [6] MOUNT AS  
  F   NOT SHOWN
 

#SEBP13600049
 

7N-8277: RAIL GP-ENGINE SUPPORT

7N8277 ENGINE SUPPORT RAIL GROUP-ENGINE LENGTH
AN ATTACHMENT
c336495 SEBP1360
7N8277 RAIL GP-ENGINE SUPPORT Parts scheme
  For full view, you need register

Parts for your 3508 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-8281 [1] SUPPORT-ENGINE-LH  
2. 7N-8280 [1] SUPPORT-ENGINE-RH  
3. 1A-0075 [28] BOLT (FINE THREAD)  
    -OR-
  1A-0458 C [28] BOLT (COARSE THREAD)  
4. 5P-8248 [28] WASHER-HARD  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Changes To Valve Clearance Settings
1983/04/27
Crankshaft Positions For Injector Timing And Valve Clearance Settings
1983/11/30
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18
Check Cylinder Heads For Water Passage Plugs
1984/04/11
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal
1985/01/16
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Stronger Push Rod Used
1985/08/01
Valve Mechanism Groups Use New Lifter Assemblies
1985/08/01
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure
1985/09/01
Check Height Of Locating Dowels Before Installing Cylinder Head
1985/10/01
Checking Or Adjusting Valve Clearances
1986/01/01
Stronger Cylinder Heads Used
1986/02/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Check Oil Drain Hole In 0R2671 or 0R2621 Remanufactured Cylinder Heads If Head Used With Breather
1986/11/01
Improved Injector Clamp Eliminates Interference With Bridge
1987/03/01
Material Changed In Exhaust and Inlet Valves
1987/05/01
Improvements To Prevent Oil Leakage At Cylinder Heads
1987/12/01
Silicone Water Seals Reinstated In Cylinder Heads
1988/08/01
New Rocker Arm Shaft Assembly and Bolts Used
1988/09/01
Improved Valve Lifter Assemblies; Better Insert Retention
1989/02/01
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, and New Cylinder Head Assemblies Groups With New Inlet Valve Seats
1990/03/01
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes
1990/06/01
Valve Lifters Can Be Removed Without Removing Cylinder Heads
1990/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability
1990/11/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/01
Taller Water Seals Used In Cylinder Head Groups
1992/08/01
Correct Identification Of Rocker Arm Assembly Components
1992/10/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Cylinder Head Bolt Tightening Procedure
1992/12/01
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt
1992/12/01
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit
1993/02/01
Valve Seat Insert Removal Tools
1993/02/01
New Cylinder Head Gasket Used
1993/09/01
Non-Counterbored Valve Guides Used{1104}
1994/03/01
Intake And Exhaust Valve Lash Increased{1105}
1994/07/01
New Exhaust Valve With Tapered Stem Used In Engine Cylinder Head Groups{1105}
1995/09/01
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
A Chamfer Has Been Added To Some Engine Cylinder Head Bolt Holes To Help Reduce Stress Concentrations And Prevent Cracks {1101}
1996/09/23
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Addition to Specifications "Valve Mechanism" {1123}
2005/02/28
New Cover Seals are Available {1107, 1201, 1210}
2002/11/01
New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
2003/01/01
A Pin for the Rocker Shaft Is Now Available for Parts Service {1102}
2003/08/01
New Rocker Arm Improves Lubrication {1123}
2003/09/01
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2004/09/01
A New Dowel Improves Lubrication to the Rocker Assembly {1123, 1123}
2003/12/01
An Improved Lifter Is Used for 3500 Engines with Mechanical Unit Injectors {1102, 1121, 1123}
2011/03/09
Remanufactured Rocker Arm has been Changed {1123}
2005/09/12
Importance of Proper Valve Lash Setting {1102, 1121, 1123}
2012/10/04
Remanufactured Camshaft and Lifter Kits Are Available for Certain 3500B Engines {1209, 1210}
2013/09/20
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3500 Industrial and Generator Set Engines
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installation Of Service Cylinder Head Assembly{1101}
Installation Of Service Cylinder Head Assembly{1101}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Service Letter-NACD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Installation Of New Cylinder Port Thermocouples
Installation Of New Cylinder Port Thermocouples
Specifications
Valve Rocker Arms, Lifters, And Bridges
SUPPLEMENT FOR UPRATED 3500 ENGINES
Valve Mechanism
3500 Generator Set Engines
Valve Mechanism
3500 Generator Set Engines
Fuel Injector Mechanism
3500 Generator Set Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
Service Letter-China
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
REMANUFACTURED VALVE LIFTERS FOR THE 3500 ENGINE
REMANUFACTURED VALVE LIFTERS FOR THE 3500 ENGINE
REMANUFACTURED VALVE ROCKER ARMS FOR THE 3500 ENGINE
REMANUFACTURED VALVE ROCKER ARMS FOR THE 3500 ENGINE
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Testing and Adjusting
Finding the Top Center Position for the No. 1 Piston
3500 Engines
Valve Lash and Valve Bridge Adjustment
3500 Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500 Engines
Valve Lash Check
3500 Engines
Disassembly and Assembly
Valve Cover - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Rocker Shaft and Push Rods - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Rocker Shaft - Disassemble
3508, 3512 and 3516 Generator Set Engines
Rocker Shaft - Assemble
3508, 3512 and 3516 Generator Set Engines
Valve Cover Base - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Changes To Valve Clearance Settings{0374,1105,1250}
1983/04/25
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area{1209,1208,1210}
1983/12/05
Check Cylinder Heads For Water Passage Plugs{1100,0374}
1984/03/12
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal {1107}
1985/01/14
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Mechanism Groups Use New Lifter Assemblies{1209}
1985/08/05
Stronger Push Rod Used{1208}
1985/08/05
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Stronger Cylinder Heads Used{1100}
1986/01/27
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Check Oil Drain Hole In OR2671 Or OR2621 Remanufactured Cylinder Heads If Head Used With Breather{1100,1300,1317}
1986/10/27
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Socket In Valve Rocker Arms Provides Lubrication For Inlet Valve Seats {1103,1105,1123}
1988/04/25
New Rocker Arm Shaft Assembly and Bolts Used{1102}
1988/09/05
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Valve Lifter Assemblies; Better Insert Retention{1112}
1989/02/13
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, New Cylinder Head Assemblies With New Inlet Valve Seats {1100,1103,1104,1105}
1990/02/26
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes{1209}
1990/06/04
Valve Lifters Can Be Removed Without Removing Cylinder Heads {1112}
1990/07/02
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability{1124}
1990/10/29
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/11
Correct Identification Of Rocker Arm Assembly Components{1123}
1992/11/09
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
New Cylinder Head Bolt Tightening Procedure{1100}
1992/12/21
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Cylinder Head Gasket Used{1124}
1993/09/20
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23

Caterpillar Parts SIS Catalog 3508 :

CYLINDER HEAD GP
7W-2233 CYLINDER HEAD GP
CYLINDER HEAD AS
4W-1900 CYLINDER HEAD AS
CYLINDER HEAD GP
2W-5802 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2234 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2447 CYLINDER HEAD GP
CYLINDER HEAD GP
2W-5803 CYLINDER HEAD GP
CYLINDER HEAD GP
8N-7172 CYLINDER HEAD GP
CYLINDER HEAD GP
8N-7173 CYLINDER HEAD GP
VALVE MECHANISM GP
7N-1858 VALVE MECHANISM GP
LIFTING GP
8N-7734 LIFTING GP
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
MOUNTING GP-ENGINE FLEXIBLE
8N-9567 MOUNTING GP-ENGINE FLEXIBLE
TRUNNION GP-ENGINE
7N-1863 TRUNNION GP-ENGINE
SUPPORT GP-ENGINE
2W-6607 SUPPORT GP-ENGINE
MOUNTING GP-ENGINE
2W-1774 MOUNTING GP-ENGINE

Truck sale:

Caterpillar 3508, Stationary Generator Sets, Construction
61,000 
Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
307.208 
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3508, Industrial engines, Construction
84,962 
Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction


 
145.548 
Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.