AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3508 MARINE ENGINE 96Y00001-00682 AIR INLET AND EXHAUST SYSTEM Caterpillar SIS



MARINE ENGINE 3508 MARINE ENGINE 96Y
 3508 MARINE ENGINE 96Y00001-00682 SEBP1361 3508 96Y   (1981)

Parts group 3508:

  For full view, you need register
AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP
LINES GP-AUXILIARY
5N-5901 LINES GP-AUXILIARY
5N5901 AUXILIARY LINES GROUP-FRESH WATER-TYPE 1
AN ATTACHMENT
LINES GP-AUXILIARY
5N-5901 LINES GP-AUXILIARY
5N5901 AUXILIARY LINES GROUP-FRESH WATER-TYPE 2
AN ATTACHMENT
AFTERCOOLER GP-WATER
7N-8676 AFTERCOOLER GP-WATER
7N8676 AFTERCOOLER GROUP-WATER
AIR CLEANER GP
AIR CLEANER GP
8N-9303 AIR CLEANER GP
8N9303 AIR CLEANER GROUP
8N3378 AIR CLEANER PARTS ARE SHOWN ON PAGE 104. AN ATTACHMENT
AIR CLEANER GP
8N-3378 AIR CLEANER GP
8N3378 AIR CLEANER GROUP
PART OF 8N9303 AIR CLEANER GROUP SHOWN ON PAGE 103. AN ATTACHMENT
AIR CLEANER GP
5N-7822 AIR CLEANER GP
5N7822 AIR CLEANER GROUP
{FOR USE WITH 8N9302, 8N9303, 1W5938, 1W5959 & 2W6543 AIR CLEANER}
AN ATTACHMENT
ADAPTER GP-AIR CLEANER
7N-8549 ADAPTER GP-AIR CLEANER
7N8549 AIR CLEANER ADAPTER GROUP
AN ATTACHMENT
LINES GP-AIR
LINES GP-AIR
7N-8669 LINES GP-AIR
7N8669 AIR LINES GROUP
SERIAL NO. 96Y1 TO 96Y588 INCLUSIVE
LINES GP-AIR
7N-8669 LINES GP-AIR
7N8669 AIR LINES GROUP
SERIAL NO. 96Y589 TO 96Y605 INCLUSIVE
LINES GP-AIR
1W-9620 LINES GP-AIR
1W9620 AIR LINES GROUP
SERIAL NO. 96Y606 TO 96Y617 INCLUSIVE
LINES GP-AIR
1W-9620 LINES GP-AIR
1W9620 AIR LINES GROUP
SERIAL NO. 96Y618 ONLY
LINES GP-AIR
4W-0711 LINES GP-AIR
4W711 AIR LINES GROUP
SERIAL NO. 96Y619-UP
LINES GP-AIR
8N-8480 LINES GP-AIR
8N8480 AIR STARTING LINES GROUP-TYPE 1
FOR R.H. "0" HOUSING WITH ELECTRIC PRELUBE
4N7556 LUBRICATOR PARTS ARE SHOWN ON PAGE 190
LINES GP-AIR
8N-8480 LINES GP-AIR
8N8480 AIR STARTING LINES GROUP-TYPE 2
FOR R.H. "0" HOUSING WITH ELECTRIC PRELUBE
4N7556-PAGE 190
AN ATTACHMENT
LINES GP-AIR
8N-8480 LINES GP-AIR
8N8480 AIR STARTING LINES GROUP-TYPE 3
FOR R.H. "0" HOUSING WITH ELECTRIC PRELUBE
4N7556-PAGE 190
AN ATTACHMENT
MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
7N-8674 MANIFOLD GP-EXHAUST
7N8674 EXHAUST MANIFOLD GROUP
SERIAL NO. 96Y1 TO 96Y618 INCLUSIVE
MANIFOLD GP-EXHAUST
7N-8674 MANIFOLD GP-EXHAUST
7N8674 EXHAUST MANIFOLD GROUP
SERIAL NO. 96Y619-UP
TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
7N-8640 LINES GP-TURBOCHARGER OIL
7N8640 TURBOCHARGER OIL LINES GROUP
TURBOCHARGER GP
1W-5348 TURBOCHARGER GP
1W5348 TURBOCHARGER GROUP
SERIAL NO. 96Y1 TO 96Y617 INCLUSIVE
1W5261-PAGE 111, 1W5262-PAGE 113
TURBOCHARGER GP
1W-5348 TURBOCHARGER GP
1W5348 TURBOCHARGER GROUP
SERIAL NO. 96Y618-UP
1W5261-PAGE 111, 1W5261-PAGE 113
TURBOCHARGER GP
1W-5261 TURBOCHARGER GP
1W5261 TURBOCHARGER GROUP
PART OF 1W5348 TURBOCHARGER GROUP SHOWN ON PAGE 110
9N5263 CARTRIDGE PARTS ARE SHOWN ON PAGE 115
TURBOCHARGER GP
1W-5262 TURBOCHARGER GP
1W5262 TURBOCHARGER GROUP
9N5263-PAGE 115
PART OF 1W5348 TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
9N-5263 CARTRIDGE GP-TURBOCHARGER
9N5263 CARTRIDGE GROUP*R
PART OF 1W5261 & 1W5262 TURBOCHARGER GROUPS SHOWN ON PAGES 111 & 113
LINES GP-EXHAUST
FLANGE GP-EXHAUST
2W-7866 FLANGE GP-EXHAUST
2W7866 EXHAUST FLANGE GROUP-254 MM (10 IN)
2W4075 MUFFLER, CONSISTING OF 2-4J4382 PLUG, IS AVAILABLE
AN ATTACHMENT
FLANGE GP-EXHAUST
2W-7863 FLANGE GP-EXHAUST
2W7863 EXHAUST FLANGE GROUP-2 REQUIRED
{FOR USE WITH 203 MM (8 IN.) PIPE
AN ATTACHMENT
NOTE: 2W4073 MUFFLER IS AVAILABLE
FLANGE GP-EXHAUST
7N-6961 FLANGE GP-EXHAUST
7N6961 EXHAUST FLANGE GROUP
FOR USE WITH 203 MM (8") PIPE. AN ATTACHMENT
FLANGE GP-EXHAUST
7N-6962 FLANGE GP-EXHAUST
7N6962 EXHAUST FLANGE GROUP
FOR USE WITH 254 MM (10") PIPE
5N2458 ELBOW & 1W215 MUFFLER ARE AVAILABLE. AN ATTACHMENT
FITTING GP-EXHAUST
5N-2457 FITTING GP-EXHAUST
5N2457 FLEXIBLE EXHAUST FITTING GROUP
FOR USE WITH 254 MM (10") OR 305 MM (12") PIPE. AN ATTACHMENT
FITTING GP-EXHAUST
7N-6968 FITTING GP-EXHAUST
7N6968 EXHAUST FITTING GROUP
FOR USE WITH 254 MM (10") PIPE. AN ATTACHMENT
ELBOW GP-EXHAUST
8N-8487 ELBOW GP-EXHAUST
8N8487 EXHAUST ELBOW GROUP
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
New Check Valve Available{1063,1355}
1994/04/18
Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fume Recirculation{1063}
1999/02/01
A New Gasket is Used {1063, 1380}
2005/05/23
Special Instruction
Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
Technical Information Bulletin
An Improperly Vented Aftercooler May Force Coolant Out Of The Radiator Overflow Tube
An Improperly Vented Aftercooler May Force Coolant Out Of The Radiator Overflow Tube
Specifications
Aftercooler
3500 Marine Engines
Aftercooler
3500 Marine Engines
Systems Operation
Aftercooler
3500 Marine Engines
Reuse And Salvage Guidelines
Visual Inspection and Salvage Procedures for Aftercoolers in 3500 Engines {1063, 1063, 1379}
Visual Inspection and Salvage Procedures for Aftercoolers in 3500 Engines {1063, 1063, 1379}
Disassembly and Assembly
Aftercooler
3508, 3512 & 3516 MARINE ENGINES
Aftercooler
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
New Nut In Fresh And Raw Water Pumps Has More Corrosion Resistance{1371}
1989/02/13
New Seal Used In Auxiliary Water Pump Groups{1361}
1989/06/19
New Bolt Improves Serviceability Of Auxiliary (Sea Water) Pump Group {1371}
1990/05/28
New Auxiliary Water Pump Groups Used{1371}
1991/09/23
New Auxiliary Water Pump Groups Used{1371}
1991/11/18
Thicker Gasket Helps Prevent Leaks In Auxiliary Sea Water Pump Applications {1371}
1993/03/01
Check Valves Require Periodic Maintenance {1355,1063}
1993/09/13
Engine News
Dual Element Air Cleaner Group Available
1985/09/01
Round Air Cleaner Inlet Adapter Available
1986/01/01
New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups
1987/03/01
Improved Air Cleaner Element Has Pleats That Are Evenly Spaced
1988/09/01
Air Filter Indicator Maintenance
1993/10/01
New Air Filter Restriction Indicator Now Reads 25 Inches Maximum{7452,1051}
1995/06/01
Air Cleaner Inlets Rotated To Upward Position{1051}
1995/11/20
Special Instruction
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Disassembly and Assembly
Air Cleaner Housings
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Dual Element Air Cleaner Group Available{1054,1051}
1985/08/26
Round Air Cleaner Inlet Adapter Available{1051}
1986/01/13
New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups {1051}
1987/03/09
Improved Air Cleaner Element Has Pleats That Are Evenly Spaced{1054}
1988/09/05
Truck Engine News
A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2004/01/01
Engine News
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage
1984/01/18
Water Cooled Exhaust Elbow Groups Available
1985/06/01
New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group
1989/11/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
New Gasket Used In Turbocharger Groups{1052,1061}
1997/03/01
New Exhaust Shield Group For Dry Exhaust Manifold Engines Has Updated Shield Assemblies {1059,1061,1067,1073}
1999/06/01
A Previous High Temperature Locknut is Used in Engine Exhaust System Groups {7553}
2003/08/01
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Specifications
Air Inlet and Exhaust Lines
3500 Marine Engines
Reuse And Salvage Guidelines
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Testing and Adjusting
Restriction of Air Inlet and Exhaust
3500 Marine Engines
Measuring Exhaust Temperature
3500 Marine Engines
Service Magazine
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage{1052,1061}
1983/12/12
Water Cooled Exhaust Elbow Groups Available{1052,1061}
1985/06/03
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/11
New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group{1059}
1989/11/13
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
Engine News
Dual Element Air Cleaner Group Available
1985/09/01
Round Air Cleaner Inlet Adapter Available
1986/01/01
New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups
1987/03/01
Improved Air Cleaner Element Has Pleats That Are Evenly Spaced
1988/09/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
Center Mating Parts Of Air Inlet Piping Extends Service Life
1993/07/01
Air Filter Indicator Maintenance
1993/10/01
New Air Filter Restriction Indicator Now Reads 25 Inches Maximum{7452,1051}
1995/06/01
Air Cleaner Inlets Rotated To Upward Position{1051}
1995/11/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Specifications
Air Inlet and Exhaust Lines
3500 Marine Engines
Testing and Adjusting
Restriction of Air Inlet and Exhaust
3500 Marine Engines
Disassembly and Assembly
Air Cleaner Housings
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Dual Element Air Cleaner Group Available{1054,1051}
1985/08/26
Round Air Cleaner Inlet Adapter Available{1051}
1986/01/13
New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups {1051}
1987/03/09
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Engine News
Improved Serviceability Of Water Cooled Exhaust Manifolds
1985/06/01
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation
1985/12/01
New Watercooled Exhaust Manifolds
1989/08/01
Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section.
1989/11/01
New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group
1989/11/01
New Water Cooled Exhaust Manifold Groups Used{1059}
1994/03/01
New Exhaust Shield Group For Dry Exhaust Manifold Engines Has Updated Shield Assemblies {1059,1061,1067,1073}
1999/06/01
A New Gasket Is Used In Turbocharger Groups {1059}
2002/02/01
Improved Gasket for the Exhaust Elbow {1059}
2003/11/01
Service Letter-NACD
Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3508, 3512 And 3516 Marine Engines
Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3508, 3512 And 3516 Marine Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
BOLT BREAKAGE AT EXHAUST MANIFOLD SLIP JOINTS
BOLT BREAKAGE AT EXHAUST MANIFOLD SLIP JOINTS
Specifications
Exhaust Manifold
3500 Marine Engines
Exhaust Manifold
3500 Marine Engines
Service Letter-China
Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3508, 3512 And 3516 Marine Engines
Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3508, 3512 And 3516 Marine Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Salvage of Weld on Water-Cooled Exhaust Manifold for 3500 Series Engines {0679, 1059}
Salvage of Weld on Water-Cooled Exhaust Manifold for 3500 Series Engines {0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Service Letter-APD
Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3508, 3512 And 3516 Marine Engines
Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3508, 3512 And 3516 Marine Engines
Testing and Adjusting
Measuring Exhaust Temperature
3500 Marine Engines
Disassembly and Assembly
Exhaust Manifolds
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Improved Serviceability Of Water Cooled Exhaust Manifolds{1350,1355}
1985/06/03
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/11
Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers{1059,1070}
1988/09/19
New Watercooled Exhaust Manifolds{1059}
1989/08/14
Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section{1059}
1989/10/30
New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group{1059}
1989/11/13
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21
Testing and Adjusting
Measuring Inlet Manifold Pressure
3500 Marine Engines
Service Magazine
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers
1988/09/01
Improved Air Cleaner Element Has Pleats That Are Evenly Spaced
1988/09/01
Stronger Leaf Spring Used In Air Shut-Off Group{1078}
1995/01/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Systems Operation
Air Inlet and Exhaust System Operation
3500 Marine Engines
Service Magazine
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage{1052,1061}
1983/12/12
Improved Remote Shutoff Group Has New Pressure Control Group{1050,1078,1085}
1985/05/13
Water Cooled Exhaust Elbow Groups Available{1052,1061}
1985/06/03
Dual Element Air Cleaner Group Available{1054,1051}
1985/08/26
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/11
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Round Air Cleaner Inlet Adapter Available{1051}
1986/01/13
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers{1059,1070}
1988/09/19
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Watercooled Exhaust Manifolds{1059}
1989/08/14
Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section{1059}
1989/10/30
New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group{1059}
1989/11/13
New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Special Instruction
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Engine News
Changes Made To Air Intake Shut-offs And Contactor Groups
1983/10/26
Stronger Leaf Spring Used In Air Shut-Off Group{1078}
1995/01/01
Specifications
Air Intake Shutoff
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Manual Shutoff
3500 Marine Engines
Air Shutoff
3500 Marine Engines
Disassembly and Assembly
Air Intake Shutoff (3508)
3508, 3512 & 3516 MARINE ENGINES
Air Intake Shutoff (3516)
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Changes Made To Air Intake Shut-offs And Contactor Groups{1078}
1983/10/17
Improved Remote Shutoff Group Has New Pressure Control Group{1050,1078,1085}
1985/05/13
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Service Magazine
Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures {0701, 0776, 0781}
2004/03/29
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies
1982/08/25
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage
1984/01/18
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers
1988/09/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
"Off-Size" Bearing Kits Available
1991/10/01
New Exhaust Bellows Used In Turbocharger Group
1992/06/01
New Bellows Assemblies Used In Turbocharger Groups
1992/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Water Cooled Turbine Housings May Require Larger Core Plugs{1065,1050}
1994/11/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
New Gasket Used In Turbocharger Groups{1052,1061}
1997/03/01
New Support Assembly (Turbocharger) Added {1059}
1998/01/20
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
New Gasket for the Turbocharger Oil Line {1052, 1307}
2004/08/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Hole in the Turbine Housing of the Turbocharger {1052}
2006/06/26
Packaging the Turbocharger {1052}
2007/02/26
Cat<SUP>&reg;</SUP> Reman Now Offers New Turbocharger and Cartridge Groups for Certain Commercial Engines {1052, 1053}
2014/09/12
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPAIRING LEAKS BETWEEN THE TURBOCHARGER TURBINE HOUSING AND THE EXHAUST ELBOW ON CERTAIN 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING LEAKS BETWEEN THE TURBOCHARGER TURBINE HOUSING AND THE EXHAUST ELBOW ON CERTAIN 3508, 3512, AND 3516 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV72 &amp; TW72) (TV78 &amp; TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV92 &amp; TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (C153 &amp; W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbocharger
3500 Marine Engines
Turbocharger
3500 Marine Engines
Turbocharger
3500 Marine Engines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPAIRING LEAKS BETWEEN THE TURBOCHARGER TURBINE HOUSING AND THE EXHAUST ELBOW ON CERTAIN 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING LEAKS BETWEEN THE TURBOCHARGER TURBINE HOUSING AND THE EXHAUST ELBOW ON CERTAIN 3508, 3512, AND 3516 ENGINES
Service Letter-Asia
Systems Operation
Turbocharger
3500 Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPAIRING LEAKS BETWEEN THE TURBOCHARGER TURBINE HOUSING AND THE EXHAUST ELBOW ON CERTAIN 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING LEAKS BETWEEN THE TURBOCHARGER TURBINE HOUSING AND THE EXHAUST ELBOW ON CERTAIN 3508, 3512, AND 3516 ENGINES
Disassembly and Assembly
Turbochargers (TW81, TW91)
3508, 3512 & 3516 MARINE ENGINES
Turbocharger (W153)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (TW81)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (TW91)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (W153)
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage{1052,1061}
1983/12/12
Water Cooled Exhaust Elbow Groups Available{1052,1061}
1985/06/03
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers{1059,1070}
1988/09/19
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
New Exhaust Bellows Used In Turbocharger Group{1052}
1992/06/15
New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
Insulation on Exhaust Components {1000}
2006/03/06
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Engine News
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage
1984/01/18
Water Cooled Exhaust Elbow Groups Available
1985/06/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
Disassembly and Assembly
Exhaust Elbow (Wet)
3508, 3512 & 3516 MARINE ENGINES
Exhaust Elbow (Dry)
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage{1052,1061}
1983/12/12
Water Cooled Exhaust Elbow Groups Available{1052,1061}
1985/06/03
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/11
New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group{1059}
1989/11/13
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27

Truck sale:

Caterpillar 3508, Stationary Generator Sets, Construction
61,000 
Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
307.208 
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3508, Industrial engines, Construction
84,962 
Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction


 
145.548 
Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.