5C8965 ENGINE AR Engine S/N 12Z537-Up 963 TRACK LOADER

Part No	Qty	Parts name
7N-1620	[1]	OIL FILLER GP
7N-1718	[1]	OIL LEVEL GAUGE GP
3N-3392	[1]	FUMES DISPOSAL GP
1W-1393	[1]	FAN DRIVE GP
7N-5276	[1]	FAN PULLEY GP
8N-0888	[1]	REGULATOR GP
		S/N 12Z537-47532, 51322-UP
6C-8901	[1]	REGULATOR GP
		S/N 12Z47533-51321
7N-2330	[1]	ENGINE AR

#SEBP13670002

5C-9206: ENGINE AR-SOUND SUPPRESSION

ENGINE AR-SOUND SUPPRESSION

5C9206 ENGINE AR-SOUND SUPPRESSION
3304 Engine S/N 12Z537-Up
Part Of 3A6486, 3A6488 Sound Supression Ars
When Ordering Parts Give Engine Ar Number And S/N. An Attachment

SEBP13670002 SEBP1367

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
1W-0734	[1]	FAN PULLEY GP
7N-1730	[1]	SOUND SUPPRESSION AR
5C-8965	[1]	ENGINE AR

#SEBP13670003

7N-1730: SOUND SUPPRESSION AR-ENGINE RELATED PARTS

SOUND SUPPRESSION AR-ENGINE RELATED PARTS

7N1730 SOUND SUPPRESSION AR-ENGINE RELATED PARTS
Engine Installation
An Attachment

SEBP13670003 SEBP1367

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
1N-3849	[1]	COVER GP
8N-9465	[1]	PANEL GP
		-OR-
1W-6524	[1]	PANEL GP
7N-1148	[1]	PULLEY GP

#SEBP13670004

7N-2330: ENGINE AR

ENGINE AR

7N2330 ENGINE AR-PART 1 OF 2
3304 Engine S/N 12Z537-Up

SEBP13670004 SEBP1367

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
7N-6553	[1]	CYLINDER BLOCK GP
7N-1714	[1]	CYLINDER BLOCK COVER GP
6N-8080	[1]	CRANKSHAFT GP
2P-7308	[1]	CRANKSHAFT SEAL GP
8N-2531	[4]	PISTON & ROD GP
		S/N 12Z537-2241
2W-1177	[4]	PISTON & ROD GP
		S/N 12Z2242-UP
1N-4436	[1]	CAMSHAFT GP
1W-2872	[1]	BALANCER GP
7N-6544	[1]	CYLINDER HEAD GP
7N-9534	[1]	CYLINDER HEAD FASTENER GP
7N-8024	[1]	VALVE MECHANISM GP
8N-4446	[1]	VALVE MECHANISM COVER GP
6N-8326	[1]	ENGINE LIFTING GP
2P-6530	[1]	CYLINDER HEAD COVER GP
8N-0303	[1]	FRONT HOUSING GP
4N-5162	[1]	FRONT HOUSING COVER GP
8N-0872	[1]	FRONT HOUSING FASTENER GP
1W-5634	[1]	FRONT GEAR GP
8N-0107	[1]	TRUNNION GP
8N-1079	[1]	ENGINE SUPPORT GP
7N-1142	[1]	CRANKSHAFT PULLEY GP
1W-4759	[1]	FLYWHEEL HOUSING GP
6N-9026	[1]	FLYWHEEL GP
7N-1717	[1]	REAR GEAR GP
2P-6155	[1]	OIL PAN GP
2P-6189	[1]	OIL PAN FASTENER GP

#SEBP13670005

7N-2330: ENGINE AR

ENGINE AR

7N2330 ENGINE AR-PART 2 OF 2
3304 Engine S/N 12Z537-Up

SEBP13670005 SEBP1367

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
2P-1784	[1]	OIL PUMP GP
7N-1719	[1]	OIL LINES GP
2P-6475	[1]	OIL FILTER GP
		S/N 12Z537-9573
1P-4244	[1]	BREATHER GP
		S/N 12Z537-33210
9Y-1252	[1]	BREATHER GP
		S/N 12Z33211-UP
7N-5909	[1]	WATER PUMP GP
7N-1720	[1]	WATER LINES GP
		S/N 12Z537-9573
2W-6779	[1]	WATER LINES GP
		S/N 12Z9574-UP
2P-6215	[1]	ENGINE OIL COOLER GP
		S/N 12Z537-9573
2W-7649	[1]	COOLER GP-FILTER BASE & ENGINE OIL
		S/N 12Z9574-UP
7N-1723	[1]	WATER LINES GP-ELBOW
		S/N 12Z537-9573
6N-7155	[1]	TURBOCHARGER GP
8N-2594	[1]	TURBOCHARGER OIL LINES GP
6N-5393	[1]	EXHAUST MANIFOLD GP
1W-3793	[1]	EXHAUST MANIFOLD FASTENER GP
6N-6855	[1]	AIR LINES GP
8N-4123	[1]	GOVERNOR & FUEL INJECTION PUMP GP
		S/N 12Z537-2101
2W-0265	[1]	GOVERNOR & FUEL INJECTION PUMP GP
		S/N 12Z2102-22066, 22068-22303
9Y-1264	[1]	GOVERNOR & FUEL INJECTION PUMP GP
		S/N 12Z22067, 22304-UP
8N-2772	[1]	FUEL INJECTION LINES GROUP
1W-0743	[1]	FUEL PRIMING PUMP & PRIMARY FILTER GP
		S/N 12Z537-6168
1W-9531	[1]	FUEL PRIMING PUMP & PRIMARY FILTER GP
		S/N 12Z6169-UP
1W-1691	[1]	DRAIN LINES GP
		S/N 12Z537-6168
1W-9533	[1]	DRAIN LINES GP
		S/N 12Z6169-UP
8N-1294	[1]	SECONDARY FUEL FILTER GP
		-OR-
1W-9532	[1]	SECONDARY FUEL FILTER GP
2W-4160	[1]	FUEL TRANSFER & MOUNTING PUMP GP

#SEBP13670006

7N-6553: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7N6553 CYLINDER BLOCK GP
7N6552-Page 9

c503169 SEBP1367

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-5496	[1]	SEAL-O-RING
2.	1S-9540	[1]	DOWEL
3.	7H-3171	[1]	PLUG-PIPE
4.	4B-3938	[1]	PLUG-CUP
5.	8M-9307	[1]	PLUG-DRAIN
	6F-7062	[1]	WASHER
6.	5M-6213	[2]	PLUG
7.	7M-4046	[2]	BEARING-SLEEVE
8.	7N-8021	[1]	PLATE-BLOCK
9.	5B-7652	[2]	DOWEL
10.	7W-7544	[1]	GASKET-PLATE
11.	7N-6552 Y	[1]	CYLINDER BLOCK AS
12.	5M-6214	[1]	PLUG-PIPE
13.	8K-1207	[2]	PIN-DOWEL
14.	8B-6349	[2]	DOWEL
15.	5S-8462	[1]	STUD
16.	8N-4110	[1]	BEARING-SLEEVE
17.	4B-9782	[5]	BALL
18.	5S-6419	[4]	BEARING-SLEEVE
19.	5S-6420	[2]	BEARING-SLEEVE
20.	2B-0858	[1]	PLUG-PIPE
	Y		SEPARATE ILLUSTRATION

#SEBP13670007

7N-6552: CYLINDER BLOCK AS

CYLINDER BLOCK AS

7N6552 CYLINDER BLOCK AS
Part Of 7N6553 Cylinder Block
Field Replacement Order 1N3574-Page 10 & 6N7727 Cylinder Block Kit

c479941 SEBP1367

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-8003	[5]	CAP-CRANKSHAFT BEARING
2.	7S-3224	[10]	BOLT
	2S-5658	[10]	WASHER-HARD
3.	2P-8889	[4]	LINER-CYLINDER
4.	2W-6134	[4]	BAND-FILLER
5.	5S-6670	[12]	SEAL-O-RING

#SEBP13670008

1N-3574: CYLINDER BLOCK GP*R

CYLINDER BLOCK GP*R

1N3574 CYLINDER BLOCK GP*R
Field Replacement For 7N6552-Page 9

c526553 SEBP1367

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-6019	[1]	PLUG
2.	8K-1207	[2]	PIN-DOWEL
3.	5B-7652	[2]	DOWEL
4.	1S-9540	[1]	DOWEL
5.	8B-6349	[2]	DOWEL
6.	5S-8462	[1]	STUD
7.	7M-4046	[2]	BEARING-SLEEVE
8.	8N-4110	[1]	BEARING-SLEEVE
9.	2A-3798	[2]	DOWEL
10.	6N-8003	[5]	CAP-CRANKSHAFT BEARING
11.	7S-3224	[10]	BOLT
	2S-5658	[10]	WASHER-HARD
12.	5S-6419	[4]	BEARING-SLEEVE
13.	5S-6420	[2]	BEARING-SLEEVE
14.	4B-9782	[5]	BALL
15.	4B-3938	[1]	PLUG-CUP

#SEBP13670009

8N-9465: PANEL GP-SOUND SUPRESSION

PANEL GP-SOUND SUPRESSION

8N9465 PANEL GP-SOUND SUPRESSION
Cylinder Block
Part Of 7N1730 Sound Suppression Ar
An Attachment

c177109 SEBP1367

8N9465 PANEL GP-SOUND SUPRESSION Parts scheme

For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-3388	[19]	BOLT
2.	9N-0869	[19]	WASHER
3.	4N-9915	[19]	GROMMET ASSEM.
4.	7N-0673	[1]	PANEL ASSEM. (R.H.)
			(Includes)
5.	1N-3090	[1]	BLANKET
6.	8K-1115	[2]	BUMPER
7.	7N-0723	[1]	PANEL ASSEM. (L.H.)
			(Includes)
8.	1N-3091	[1]	BLANKET
9.	1N-3092	[1]	BLANKET
10.	8K-1115	[2]	BUMPER

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}

Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
963 TRACK-TYPE LOADER

Tool Operating Manual

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Technical Analysis

Technical Analysis (TA1) Visual Inspection for Track-Type Loaders {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Loaders {0372, 1000, 7000, 753S, 7565}

Disassembly and Assembly

Engine
963 TRACK-TYPE LOADER

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Analyzing A Major Engine Failure{1000}
1982/07/19

Unusual Transmission Noises At Low Engine RPM{3208}
1982/08/23

Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

Common Drain Pipe For Engine Or Transmission Oil{1318,3179}
1983/08/15

Improved Temperature Gauges Available For Transmission Oil And Engine Coolant {7453}
1984/01/16

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/24

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 963 :

5C-9206 ENGINE AR-SOUND SUPPRESSION

7N-1730 SOUND SUPPRESSION AR-ENGINE RELATED PARTS

7N-2330 ENGINE AR

7N-6553 CYLINDER BLOCK GP

7N-6552 CYLINDER BLOCK AS

1N-3574 CYLINDER BLOCK GP*R

8N-9465 PANEL GP-SOUND SUPRESSION

Truck sale:

394,800

Caterpillar 963K, track loaders, Construction
- track loaders
ZIEGLER CAT

244,373

Caterpillar 963K, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.

386,250

Caterpillar 963K, track loaders, Construction
- track loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC

Caterpillar 963, track loaders, Construction
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI

148,500

Caterpillar 963K, track loaders, Construction
- track loaders
ALTORFER INDUSTRIES