AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W0263 PUMP GP-FUEL INJECTION Engine S/N 12Z22304-Up 1W6539-Page 62A Part Of 9Y1264 Pump-Governor & Fuel Injection 963


FUEL SYSTEM
PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION

TRACK LOADER 963 TRACK LOADER 21Z
 963 LGP TRACK LOADER 21Z00001-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1367 963 21Z   (1982)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
8N-2515 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0263 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0263 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
8N-2517 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
 

#SEBP13670160
 

2W-0263: PUMP GP-FUEL INJECTION

2W0263 PUMP GP-FUEL INJECTION
Engine S/N 12Z22304-Up
1W6539-Page 62A
Part Of 9Y1264 Pump-Governor & Fuel Injection
c608425 SEBP1367
2W0263 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG-O-RING (5/16-24THD)  
  4J-7533 [2] SEAL-O-RING (6.07MM ID)  
2. 1W-3485 [1] RACK-REGULATOR  
3. 1W-3486 [1] HOUSING AS-FUEL PUMP  
4. 1S-1953 [1] BEARING-RACK  
5. 1W-3285 [1] BEARING-RACK  
6. 4P-8480 [4] PIN-PUMP GUIDE  
7. 6I-0979 [4] DOWEL  
8. 8N-2518 [1] BEARING-SLEEVE  
9. 7N-7970 [1] BEARING-SLEEVE  
10. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
11. 1W-6539 Y [4] PUMP GP-FUEL INJECTION  
12. 8N-5117 [4] BUSHING-TERMINAL  
13. 114-8718 [4] SEAL-O-RING  
14. 4W-6869 [4] SPACER-FUEL PUMP  
15. 4P-9022 [1] CAMSHAFT AS  
16. 7N-7264 [4] WEIGHT-GOVERNOR  
17. 9Y-7037 [4] BOLT  
18. 1S-5440 [4] DOWEL  
19. 4N-9019 [1] DOWEL  
20. 7E-3986 [1] CARRIER-WEIGHT  
21. 7L-3326 [1] BEARING-THRUST  
22. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
23. 7N-7166 [2] RACE-THRUST BEARING  
24. 7N-8421 [1] RING-RETAINING  
25. 8N-2487 [1] WASHER-THRUST  
26. 4P-9832 [4] LIFTER AS  
27. 0S-1615 [4] BOLT (1/4-20X.75IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13670161
 

8N-2517: PUMP GP-FUEL INJECTION

8N2517 PUMP GP-FUEL INJECTION
Engine S/N 12Z537-1362
Part Of 8N2515 Pump-Fuel Injection
c226518 SEBP1367
8N2517 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-3506 [1] RING-RETAINER  
2. 8N-1415 [1] SPRING-CHECK  
3. 8N-2516 [1] BONNET-VALVE  
4. 8N-1414 [1] CHECK AS-PUMP  
5. 8N-9130 [1] PLUNGER AS  
6. 7N-1067 [1] SPRING-LIFTER  
7. 7N-1415 [1] WASHER-RETAINER  
 

#SEBP13670162
 

8N-2772: LINES GP-FUEL INJECTION

8N2772 LINES GP-FUEL INJECTION
8N8170-Page 62B
c603131 SEBP1367
8N2772 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-8170 Y [1] LINES GP-FUEL INJECTION  
2. 3S-2713 [3] NUT-FULL  
3. 6V-6921 C [1] SEAL-RING  
4. 2H-3934 [1] SEAL  
5. 0S-1571 [1] BOLT  
6. 2H-3932 [1] SEAL  
7. 0L-1143 [1] BOLT (3/8-16X2.5IN)  
    -OR-
  0S-1619 C [1] BOLT  
8. 5F-7054 [1] SEAL-O-RING  
9. 5M-2894 [2] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13670163
 

1W-6539: PUMP GP-FUEL INJECTION

1W6539 PUMP GP-FUEL INJECTION
Type 1
Part Of 8N2515, 2W0263 Pumps-Fuel Injection
c182072 SEBP1367
1W6539 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-3506 [1] RING-RETAINER  
2. 8N-1415 [1] SPRING-CHECK  
3. 8N-2516 [1] BONNET-VALVE  
4. 8N-1414 [1] CHECK AS-PUMP  
5. 1W-6541 [1] PLUNGER AS  
6. 7N-1067 [1] SPRING-LIFTER  
7. 7N-1415 [1] WASHER-RETAINER  
8. 8H-9299 [1] SCREW-PLUNGER GEAR  
 

#SEBP13670164
 

1W-6539: PUMP GP-FUEL INJECTION

1W6539 PUMP GP-FUEL INJECTION
Type 2
Part Of 8N2515, 2W0263 Pumps-Fuel Injection
c466949 SEBP1367
1W6539 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1927 [1] RING-RETAINER  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-9171 [1] BONNET-VALVE  
4. 1W-6987 [1] VALVE AS-CHECK  
5. 1W-6541 [1] PLUNGER AS  
6. 7N-1067 [1] SPRING-LIFTER  
7. 7W-2808 [1] WASHER-RETAINER  
8. 8H-9299 [1] SCREW-PLUNGER GEAR  
    (11.1MM LG)
    -OR-
  7C-5278 C [1] BOLT-GEAR  
    (12.1MM LG)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13670165
 

8N-8170: LINES GP-FUEL INJECTION

8N8170 LINES GP-FUEL INJECTION
Engine S/N 12Z537-1694
Part Of 8N2772 Lines-Fuel Injection
c233477 SEBP1367
8N8170 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5132 [4] CLAMP  
2. 1T-0416 [4] BOLT  
3. 8N-7001 [4] NOZZLE ASSEM.  
    (Each Includes)
4. 8F-3469 [1] SEAL  
5. 8N-4174 [1] SEAL  
6. 8N-4183 [1] WASHER  
7. 9L-9098 [1] SEAL  
8. 8N-5725 [1] CLAMP ASSEM.  
9. 6N-6404 [6] CLAMP  
10. 0S-1616 [2] BOLT  
  3B-4504 [2] LOCKWASHER  
11. 1W-3013 [1] BRACKET ASSEM.  
12. 1A-5964 [1] BOLT  
13. 5M-2894 [2] WASHER  
14. 6N-6403 [5] CLAMP (threaded)  
15. 6H-9954 [4] MACHINE SCREW ASSEM.  
16. 8N-8014 [1] LINE ASSEM. (No. 4)  
17. 8N-8012 [1] LINE ASSEM. (No. 2)  
18. 8N-8011 [1] LINE ASSEM. (No. 1)  
19. 0S-1571 [1] BOLT  
20. 1W-4699 [1] BRACKET ASSEM.  
21. 8N-8013 [1] LINE ASSEM. (No. 3)  
 

#SEBP13670166
 

8N-8170: LINES GP-FUEL INJECTION

8N8170 LINES GP-FUEL INJECTION
Engine S/N 12Z1695-5320
Part Of 8N2772 Lines-Fuel Injection
c306045 SEBP1367
8N8170 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5132 [4] CLAMP  
2. 1T-0416 [4] BOLT  
3. 8N-7001 [4] NOZZLE ASSEM.  
    (Each Includes)
4. 8F-3469 [1] SEAL  
5. 8N-4174 [1] SEAL  
6. 8N-4183 [1] WASHER  
7. 9L-9098 [1] SEAL  
8. 1W-9167 C [1] CLAMP ASSEM.  
9. 1W-9168 C [6] CLAMP  
10. 6V-5783 C [2] SCREW  
11. 1W-3013 [1] BRACKET ASSEM.  
12. 0T-0065 C [1] BOLT  
13. 5M-2894 [2] WASHER  
14. 1W-9169 C [4] CLAMP  
15. 5P-4939 C [4] MACHINE SCREW ASSEM.  
16. 8N-8014 [1] LINE ASSEM. (No. 4)  
17. 8N-8012 [1] LINE ASSEM. (No. 2)  
18. 8N-8011 [1] LINE ASSEM. (No. 1)  
19. 0S-1571 [1] BOLT  
20. 2W-0845 C [1] BRACKET ASSEM.  
21. 8N-8013 [1] LINE ASSEM. (No. 3)  
  C   INDICATES CHANGE
 

#SEBP13670167
 

8N-8170: LINES GP-FUEL INJECTION

8N8170 LINES GP-FUEL INJECTION
Engine S/N 12Z5321-10965
1W8995, 1W8996-Page 63.01.02
Part Of 8N2772 Lines-Fuel Injection
c313451 SEBP1367
8N8170 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5132 [4] CLAMP-NOZZLE  
2. 1T-0416 [4] BOLT  
3. 8N-7005 CR [4] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
4. 2W-1230 [1] SCREW-BUTTON HEAD  
5. 1W-8616 [1] WASHER-SEALING  
6. 1W-7461 [1] WASHER  
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 1W-8996 CY [1] LINES GP-FUEL INJECTION  
9. 0T-0065 [1] BOLT  
10. 5M-2894 [2] WASHER  
11. 0S-1571 [1] BOLT  
12. 1W-8995 CY [1] LINES GP-FUEL INJECTION  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13670168
 

8N-8170: LINES GP-FUEL INJECTION

8N8170 LINES GP-FUEL INJECTION
Engine S/N 12Z10966-45417
7C5160, 7C5170-Page 63.02
Part Of 8N2772 Lines-Fuel Injection
c354533 SEBP1367
8N8170 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5132 [4] CLAMP-NOZZLE  
2. 1T-0416 [4] BOLT  
3. 8N-7005 R [4] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
4. 2W-1230 [1] SCREW-BUTTON HEAD  
5. 8T-0659 [1] WASHER-SEALING  
6. 7W-4486 [1] WASHER  
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 7C-5170 CY [1] LINES GP-FUEL INJECTION  
9. 0T-0065 [1] BOLT  
10. 5M-2894 [2] WASHER  
11. 0S-1571 [1] BOLT  
12. 7C-5160 CY [1] LINES GP-FUEL INJECTION  
13. 8H-9204 C [4] WASHER-FELT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13670169
 

8N-8170: LINES GP-FUEL INJECTION

8N8170 LINES GP-FUEL INJECTION
Engine S/N 12Z45418-Up
4P9950, 4P9960-Page 63.03
Part Of 8N2772 Lines-Fuel Injection
c544778 SEBP1367
8N8170 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5132 [4] CLAMP-NOZZLE  
2. 1T-0416 [4] BOLT  
3. 8N-7005 R [4] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
4. 2W-1230 [1] SCREW-BUTTON HEAD  
5. 8T-0659 [1] WASHER-SEALING  
6. 7W-4486 [1] WASHER  
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 4P-9960 CY [1] LINES GP-FUEL INJECTION  
9. 0T-0065 [1] BOLT  
10. 5M-2894 [3] WASHER  
11. 0S-1571 [1] BOLT  
12. 4P-9950 CY [1] LINES GP-FUEL INJECTION  
13. 8H-9204 [4] WASHER-FELT  
14. 0S-1608 [1] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation of 8G4418 Vandalism Guard Group{7451}
Installation of 8G4418 Vandalism Guard Group{7451}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Disassembly and Assembly
Fuel Transfer Pump
963 TRACK-TYPE LOADER
Fuel Injection Nozzles
963 TRACK-TYPE LOADER
Fuel Injection Pumps
963 TRACK-TYPE LOADER
Fuel Injection Pump Housing And Governor
963 TRACK-TYPE LOADER
Fuel Injection Pump Housing
963 TRACK-TYPE LOADER
Governor
963 TRACK-TYPE LOADER
Fuel Injection Nozzles - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Vandalism Guard Prevents Damage When The Platform Is Tilted{7315}
1983/04/25
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Tube Assemblies In Fuel Lines Group Prevent Contact With Transmission Oil Cooler Lines {1274,1273,1256}
1984/06/25
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2007/08/13
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Cat® Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Machine Engines {1251, 1278}
2014/09/04

Caterpillar Parts SIS Catalog 963 :

PUMP GP-FUEL INJECTION
2W-0263 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
8N-2515 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
8N-2515 PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER*R
1W-1695 PUMP GP-FUEL TRANSFER*R
PUMP GP-FUEL TRANSFER*R
1W-1695 PUMP GP-FUEL TRANSFER*R
PUMP GP-FUEL TRANSFER*R
1W-1695 PUMP GP-FUEL TRANSFER*R
PUMP GP-FUEL TRANSFER
2W-4160 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
7N-6831 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION
8N-2517 PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-2772 LINES GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8170 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8170 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8170 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8170 LINES GP-FUEL INJECTION

Truck sale:

Caterpillar 963K, track loaders, Construction
394,800 
Caterpillar 963K, track loaders, Construction
- track loaders
ZIEGLER CAT
Caterpillar 963K, track loaders, Construction
244,373 
Caterpillar 963K, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 963K, track loaders, Construction
386,250 
Caterpillar 963K, track loaders, Construction
- track loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar 963, track loaders, Construction
 
Caterpillar 963, track loaders, Construction
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 963K, track loaders, Construction
148,500 
Caterpillar 963K, track loaders, Construction
- track loaders
ALTORFER INDUSTRIES
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.