AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7P2719 IDLER GP-FRONT-PART 2 OF 2 S/N 21Z1-654 963 TRACK LOADER


UNDERCARRIAGE
IDLER GP
FRAME AND BODY
GUARD GP

TRACK LOADER 963 TRACK LOADER 21Z
 963 LGP TRACK LOADER 21Z00001-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1367 963 21Z   (1982)

UNDERCARRIAGE

IDLER GP
IDLER GP-FRONT
7P-2719 IDLER GP-FRONT
IDLER GP-FRONT
7P-2719 IDLER GP-FRONT
IDLER GP-FRONT
7P-2719 IDLER GP-FRONT
IDLER GP-FRONT
7P-2719 IDLER GP-FRONT
IDLER GP-FRONT
5G-7869 IDLER GP-FRONT
IDLER GP-FRONT
5G-7869 IDLER GP-FRONT
IDLER GP-FRONT
3W-8157 IDLER GP-FRONT
IDLER GP-FRONT
3W-8157 IDLER GP-FRONT
IDLER GP-FRONT
3W-8157 IDLER GP-FRONT
IDLER GP-FRONT
3W-8157 IDLER GP-FRONT
 

#SEBP13670590
 

7P-2719: IDLER GP-FRONT

7P2719 IDLER GP-FRONT-PART 2 OF 2
S/N 21Z1-654
c756465 SEBP1367
7P2719 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
34. 6H-6269 [4] RING-WEAR  
35. 5F-0149 [2] SEAL-O-RING (91.44MM ID)  
36. 5M-2998 [2] RING-EXTRUSION  
  5M-2997 [2] SEAL  
37. 5P-9447 [2] PLATE  
38. 7B-3028 [8] SCREW-DRIVE (4X3/16IN)  
39. 7K-9203 [4] SEAL-LIP  
40. 7P-2781 [2] RING  
41. 7P-6747 [4] SEAL AS  
42. 8G-1562 [2] RETAINER  
43. 8G-4259 [2] BEARING-ALIGNING  
44. 1A-1135 [8] BOLT (5/8-11X2IN)  
45. 1H-8397 [2] RING-RETAINING  
46. 4S-9006 [2] SEAL-PACKING  
47. 8H-7980 [2] PISTON  
48. 7G-4332 [2] STOPPER  
49. 7G-4408 [2] PLUG  
50. 3P-1900 [4] BUSHING AS-IDLER (EACH INCLUDES)  
51. 8P-5197 [1] BEARING AS  
52. 9B-2289 [2] PIN  
53. 1H-6227 [4] SEAL-O-RING (101MM ID)  
54. 6V-1915 [4] SEAL GP-DUO-CONE (EACH INCLUDES)  
  8H-2262 [1] RING-TORIC SEAL  
55. 6V-1914 [1] RING  
56. 8G-1450 [2] SHAFT-GOVERNOR CONTROL  
57. 1A-2029 [24] BOLT (3/8-16X1.125IN)  
58. 7M-7260 GASKET-LIQUID  
59. 5M-2894 [24] WASHER (2.5MM THK)  
 

#SEBP13670591
 

7P-2719: IDLER GP-FRONT

7P2719 IDLER GP-FRONT-PART 1 OF 2
S/N 21Z655-812
c756476 SEBP1367
7P2719 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-1459 [2] SPRING-RECOIL  
2. 3W-8829 C [2] PILOT  
3. 7P-6777 [4] PIN  
4. 3W-8831 C [2] CYLINDER  
5. 2S-5926 [2] VALVE (RELIEF)  
  2S-5925 [2] VALVE (FILL)  
  5M-6708 [4] WASHER  
6. 7P-4229 [2] FLANGE AS  
7. 7P-6761 [2] BULKHEAD  
8. 8S-9092 [8] BOLT  
9. 7P-6770 [2] SUPPORT AS  
    (EACH INCLUDES)
10. 7P-7858 [2] BEARING-SLEEVE  
11. 7K-9202 [4] SEAL-LIP  
12. 1D-4566 [2] BOLT  
13. 1D-4719 [6] NUT-FULL  
14. 7P-2358 [2] PIN  
15. 7P-2355 [4] PIN  
16. 0L-1329 [4] BOLT  
17. 7T-4562 [2] IDLER AS (FRONT)  
18. 4F-7226 [4] BOLT  
  4K-9943 [4] WASHER-HARD  
  5M-5000 [4] LOCK-PIN  
19. 3W-8404 C [2] LINK AS  
    (RH OUTER-LH INNER)
  3W-8401 C [2] LINK AS  
    (RH INNER-LH OUTER)
    (EA LINK AS INCL)
  3W-8403 [1] SLEEVE  
20. 1J-1902 [8] SEAL-LIP  
21. 7P-6768 [2] ROD AS  
    (EACH INCLUDES)
  7P-7335 [1] BEARING-SLEEVE  
22. 1D-4612 [8] BOLT  
23. 5P-8248 [12] WASHER-HARD  
24. 7P-6773 [2] PILOT  
25. 3W-8399 C [2] GUARD AS  
    (RH OUTER-LH INNER)
  3W-8396 C [2] GUARD AS  
    (RH INNER-LH OUTER)
    (EA GUARD AS INCL)
26. 3W-8398 [2] BEARING-SLEEVE  
27. 1A-8063 [4] BOLT  
28. 6B-9194 [4] BOLT  
29. 7P-2751 [2] YOKE AS  
    (EACH INCLUDES)
30. 7P-7334 [2] BEARING-SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13670592
 

7P-2719: IDLER GP-FRONT

7P2719 IDLER GP-FRONT-PART 2 OF 2
S/N 21Z655-812
c756477 SEBP1367
7P2719 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
31. 6H-6269 [4] RING-WEAR  
32. 5H-8624 C [2] SEAL-O-RING  
33. 5M-2998 [2] RING-EXTRUSION  
  5M-2997 [2] SEAL  
34. 5P-9447 [2] PLATE  
35. 7B-3028 [8] SCREW-DRIVE  
36. 7K-9203 [4] SEAL-LIP  
37. 7P-2781 [2] RING  
38. 7P-6747 [4] SEAL AS  
39. 8G-1562 [2] RETAINER  
40. 8G-4259 [2] BEARING-ALIGNING  
41. 1A-1135 [8] BOLT  
42. 1H-8397 [2] RING-RETAINING  
43. 4S-9006 [2] SEAL-PACKING  
44. 8H-7980 [2] PISTON  
45. 7G-4332 [2] STOPPER  
46. 7G-4408 [2] PLUG  
47. 3P-1900 [4] BUSHING AS-IDLER  
    (EACH INCLUDES)
48. 8P-5197 [1] BEARING AS  
49. 9B-2289 [2] PIN  
50. 1H-6227 [4] SEAL-O-RING  
51. 6V-1915 [4] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  8H-2262 [1] RING-TORIC SEAL  
52. 6V-1914 [1] RING  
53. 8G-1450 [2] SHAFT-GOVERNOR CONTROL  
54. 1A-2029 [24] BOLT  
55. 7M-7260 B GASKET-LIQUID  
56. 5M-2894 [24] WASHER  
57. 3B-8489 C [4] FITTING-GREASE  
58. 7K-9209 C [8] SEAL-LIP  
59. 7P-8733 C [8] SPRING-DISC  
60. 3W-8406 C [4] CAP  
61. 0S-1573 [12] BOLT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13670593
 

5G-7869: IDLER GP-FRONT

5G7869 IDLER GP-FRONT-PART 1 OF 2
S/N 21Z813-3441
c757965 SEBP1367
5G7869 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-1584 [2] SPRING-RECOIL  
2. 3W-8829 [2] PILOT  
3. 7P-6777 [4] PIN  
4. 3W-8831 [2] CYLINDER  
5. 2S-5926 [2] VALVE (RELIEF)  
  2S-5925 [2] VALVE (FILL)  
  5M-6708 [4] WASHER  
6. 7P-4229 [2] FLANGE AS  
7. 7P-6761 [2] BULKHEAD  
8. 7X-0347 [8] BOLT  
9. 7P-6768 [2] ROD AS  
    (EACH INCLUDES)
  7P-7335 [1] BEARING-SLEEVE  
10. 1J-1902 [8] SEAL-LIP  
11. 7K-9202 [4] SEAL-LIP  
12. 7X-0328 [2] BOLT  
13. 6V-8188 [6] NUT  
14. 7P-2358 [2] PIN  
15. 7P-2355 [4] PIN  
16. 7X-0326 [4] BOLT  
17. 7T-4562 [2] IDLER AS  
18. 7X-0318 [4] BOLT  
  7X-0563 [4] WASHER-HARD  
  5M-5000 [4] LOCK-PIN  
19. 7P-6773 [2] PILOT  
20. 6V-4432 [12] BOLT  
21. 7K-9209 [8] SEAL-LIP  
22. 8C-8842 [8] BOLT  
23. 8T-4994 [12] WASHER  
24. 3W-8406 [4] CAP  
  7P-8733 [8] SPRING-DISC  
25. 3W-8396 [2] GUARD AS  
    (RH OUTER-LH INNER)
  3W-8399 [2] GUARD AS  
    (RH INNER-LH OUTER)
    (EACH INCLUDES)
  3W-8398 [2] BEARING-SLEEVE  
26. 3B-8489 [4] FITTING-GREASE  
27. 8T-8924 [4] BOLT  
28. 7X-0463 [4] BOLT  
29. 3W-2891 [2] YOKE AS  
    (EACH INCLUDES)
30. 7P-7334 [2] BEARING-SLEEVE  
31. 3W-8401 [2] LINK AS (RH OUTER-LH INNER)  
  3W-8404 [2] LINK AS (RH INNER-LH OUTER)  
    (EACH INCLUDES)
  3W-8403 [1] SLEEVE  
 

#SEBP13670594
 

5G-7869: IDLER GP-FRONT

5G7869 IDLER GP-FRONT-PART 2 OF 2
S/N 21Z813-3441
c757966 SEBP1367
5G7869 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
32. 6H-6269 [4] RING-WEAR  
33. 5H-8624 [2] SEAL-O-RING  
34. 5M-2998 [2] RING-EXTRUSION  
  5M-2997 [2] SEAL  
35. 5P-9447 [2] PLATE  
36. 7B-3028 [8] SCREW-DRIVE  
37. 7K-9203 [4] SEAL-LIP  
38. 7P-2781 [2] RING  
39. 7P-6747 [4] SEAL AS  
40. 8G-1562 [2] RETAINER  
41. 8G-4259 [2] BEARING-ALIGNING  
42. 7X-0346 [8] BOLT  
43. 1H-8397 [2] RING-RETAINING  
44. 4S-9006 [2] SEAL-PACKING  
45. 8H-7980 [2] PISTON  
46. 7G-4332 [2] STOPPER  
47. 7G-4408 [2] PLUG  
48. 3P-1900 [4] BUSHING AS-IDLER  
    (EACH INCLUDES)
49. 8P-5197 [1] BEARING AS  
50. 9B-2289 [2] PIN  
51. 6V-1915 [4] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  6V-1914 [1] RING  
52. 8H-2262 [1] RING-TORIC SEAL  
53. 1H-6227 [4] SEAL-O-RING  
54. 8G-1450 [2] SHAFT-GOVERNOR CONTROL  
55. 9B-7237 [24] BOLT  
  8T-4896 [24] WASHER-HARD  
56. 7M-7260 B GASKET-LIQUID  
57. 7P-6770 [2] SUPPORT AS  
    (EACH INCLUDES)
58. 7P-7858 [2] BEARING-SLEEVE  
  B   USE AS REQUIRED
 

#SEBP13670595
 

3W-8157: IDLER GP-FRONT

3W8157 IDLER GP-FRONT-PART 1 OF 2
S/N 21Z3442-4170
c752614 SEBP1367
3W8157 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-1584 [2] SPRING-RECOIL  
2. 8T-4176 M [14] BOLT  
3. 8Y-0038 [4] PIN  
4. 7P-8733 [8] SPRING-DISC  
5. 8T-4195 M [4] BOLT  
  8T-4121 [4] WASHER  
6. 8Y-2203 [2] LINK AS  
    (RH OUTER-LH INNER)
  8Y-2204 [2] LINK AS  
    (RH INNER-LH OUTER)
    (EACH INCLUDES)
  3W-8403 [1] SLEEVE  
7. 8Y-0035 [2] YOKE AS  
    (EACH INCLUDES)
8. 7P-7334 [2] BEARING-SLEEVE  
9. 7X-0463 [4] BOLT  
10. 1J-1902 [8] SEAL-LIP  
11. 7K-9202 [4] SEAL-LIP  
12. 7X-2563 M [4] BOLT  
13. 8T-4244 M [6] NUT  
14. 7P-2358 [2] PIN  
15. 7P-2355 [4] PIN  
16. 8T-6868 M [4] BOLT  
17. 7T-4562 [2] IDLER AS  
18. 7X-0318 [4] BOLT  
  7X-0563 [4] WASHER-HARD  
  5M-5000 [4] LOCK-PIN  
19. 3B-8489 [8] FITTING-GREASE  
20. 3W-9592 [2] GUARD AS  
    (RH OUTER-LH INNER)
  3W-9593 [2] GUARD AS  
    (RH INNER-LH OUTER)
    (EACH INCLUDES)
  3W-8398 [2] BEARING-SLEEVE  
21. 7K-9209 [8] SEAL-LIP  
22. 7X-2565 M [8] BOLT  
23. 8T-4123 [12] WASHER-PLATED  
24. 3W-8406 [4] CAP  
  7P-8733 [8] SPRING-DISC  
  M   METRIC PART
 

#SEBP13670596
 

3W-8157: IDLER GP-FRONT

3W8157 IDLER GP-FRONT-PART 2 OF 2
S/N 21Z3442-4170
c752615 SEBP1367
3W8157 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
25. 3W-7522 [2] GUARD  
26. 7P-7245 [2] VALVE  
27. 2J-6274 [2] SEAL-O-RING  
28. 5G-9672 [2] PLATE  
29. 3W-8160 [2] PISTON AS  
    (EACH INCLUDES)
  7P-7335 [1] BEARING-SLEEVE  
30. 1F-0636 [4] SEAL-LIP  
31. 8Y-0039 [2] PLATE-PRESSURE  
32. 8Y-0037 [2] SEAL AS  
33. 3W-8177 [2] RETAINER  
34. 8T-6404 [2] SEAL-O-RING  
35. 8Y-5306 [2] RETAINER  
36. 3W-8175 [2] SUPPORT AS  
    (EACH INCLUDES)
37. 7P-6348 [2] BEARING  
38. 3W-8158 [2] PISTON AS  
39. 7G-4332 [2] STOPPER  
40. 6Y-0473 [2] PLUG  
41. 3P-1900 [4] BUSHING AS-IDLER  
    (EACH INCLUDES)
42. 9B-2289 [2] PIN  
43. 2J-7426 [2] SEAL-LIP  
44. 9W-7235 [4] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  6V-1914 [1] RING  
45. 8H-2262 [1] RING-TORIC SEAL  
46. 1H-6227 [4] SEAL-O-RING (101MM ID)  
47. 8G-1450 [2] SHAFT-TRACK IDLER  
48. 9B-7237 [24] BOLT (3/8-16X1.25IN)  
  8T-4896 [24] WASHER-HARD (2.5MM THK)  
 

#SEBP13670597
 

3W-8157: IDLER GP-FRONT

3W8157 IDLER GP-FRONT-PART 1 OF 2
S/N 21Z4171-Up
c752632 SEBP1367
3W8157 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-1584 [2] SPRING-RECOIL  
2. 8T-4176 M [14] BOLT (M12X1.75X90MM)  
3. 8Y-0038 [4] PIN  
4. 7P-8733 [8] SPRING-DISC  
5. 8T-4195 M [4] BOLT (M10X1.50X30MM)  
  8T-4121 [4] WASHER (21MM OD)  
6. 8Y-2203 [2] LINK AS  
    (RH OUTER-LH INNER)
  8Y-2204 [2] LINK AS  
    (RH INNER-LH OUTER)
    (EA LINK AS INCLUDES)
  3W-8403 [1] SLEEVE  
7. 8Y-0035 [2] YOKE AS  
    (EACH INCLUDES)
8. 7P-7334 [2] BEARING-SLEEVE  
9. 7X-0462 [4] BOLT  
  8T-5361 [4] WASHER (5MM THK)  
10. 1J-1902 [8] SEAL-LIP  
11. 7K-9202 [4] SEAL-LIP  
12. 7X-2563 M [4] BOLT (M20X2.5X60MM)  
13. 8T-4244 M [6] NUT (M12X1.75 THD)  
14. 7P-2358 [2] PIN  
15. 7P-2355 [4] PIN  
16. 8T-6868 M [4] BOLT (M12X1.75X80MM)  
17. 7T-4562 [2] IDLER AS  
18. 7X-0318 [4] BOLT (7/16-14X4IN)  
  7X-0563 [4] WASHER-HARD (6.4MM THK)  
  5M-5000 [4] LOCK-PIN  
19. 3B-8489 [8] FITTING-GREASE  
20. 8Y-6672 C [2] GUARD AS  
    (RH OUTER-LH INNER)
  8Y-6671 C [2] GUARD AS  
    (RH INNER-LH OUTER)
    (EA GUARD AS INCLUS)
  3W-8398 [2] BEARING-SLEEVE  
21. 7K-9209 [8] SEAL-LIP  
22. 7X-2565 M [8] BOLT  
23. 8T-4123 [12] WASHER-PLATED (3.5MM THK)  
24. 3W-8406 [4] CAP  
   
    QUANTITIES SHOWN ARE
    THOSE REQUIRED FOR
    BOTH LH & RH SIDES
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP13670598
 

3W-8157: IDLER GP-FRONT

3W8157 IDLER GP-FRONT-PART 2 OF 2
S/N 21Z4171-Up
c752633 SEBP1367
3W8157 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
25. 3W-7522 [2] GUARD  
26. 7P-7245 [2] VALVE  
27. 2J-6274 [2] SEAL-O-RING  
28. 5G-9672 [2] PLATE  
29. 3W-8160 [2] PISTON AS  
    (EACH INCLUDES)
  7P-7335 [1] BEARING-SLEEVE  
30. 1F-0636 [4] SEAL-LIP  
31. 8Y-0039 [2] PLATE-PRESSURE  
32. 8Y-0037 [2] SEAL AS  
33. 3W-8177 [2] RETAINER  
34. 7X-4799 [2] SEAL-O-RING  
35. 8Y-5306 [2] RETAINER  
36. 3W-8175 [2] SUPPORT AS  
    (EACH INCLUDES)
37. 7P-6348 [2] BEARING  
38. 3W-8158 [2] PISTON AS  
39. 7G-4332 [2] STOPPER  
40. 6Y-0473 [2] PLUG  
41. 3P-1900 [4] BUSHING AS-IDLER  
    (EACH INCLUDES)
42. 9B-2289 [2] PIN  
43. 2J-7426 [2] SEAL-LIP  
44. 6V-1915 [4] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  6V-1914 [1] RING  
45. 8H-2262 [1] RING-TORIC SEAL  
46. 1H-6227 [4] SEAL-O-RING (101MM ID)  
47. 8G-1450 [2] SHAFT-TRACK IDLER  
48. 9B-7237 [24] BOLT (3/8-16X1.25IN)  
  8T-4896 [24] WASHER-HARD (2.5MM THK)  
   
    QUANTITIES SHOWN ARE
    THOSE REQUIRED FOR
    BOTH LH & RH SIDES
 

#SEBP13670599
 

8G-9575: GUARD GP-IDLER

8G9575 GUARD GP-IDLER
An Attachment
c320659 SEBP1367
8G9575 GUARD GP-IDLER Parts scheme
  For full view, you need register

Parts for your 963 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-2888 [2] GUARD AS.  
2. 3W-2891 [2] YOKE AS.  
    (EACH INCLUDES)
3. 7P-7334 [2] BEARING  
4. 3W-2885 [2] GUARD AS.  
5. 9S-1366 [4] BOLT  
6. 5P-8245 [8] WASHER  
7. 0S-1573 [4] BOLT  
8. 9P-9770 [2] PLATE  
9. 2H-3855 [16] BOLT  
10. 5P-1076 [20] WASHER  
11. 7B-3235 [4] BOLT  
12. 8G-9577 [2] GUARD AS.  
13. 3W-2892 [4] LUG  
 

Information:

Special Instruction
Installation Of Idler Guard Groups{4159, 7150}
Installation Of Idler Guard Groups{4159, 7150}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
A Stronger Recoil Spring Prevents Track Jumping{4158}
A Stronger Recoil Spring Prevents Track Jumping{4158}
Installation of Center Tread Idlers with SystemOne® Track{4159}
Installation of Center Tread Idlers with SystemOne® Track{4159}
Technical Information Bulletin
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Specifications
Front Idler Groups<BR> (7P2719)
963 TRACK-TYPE LOADER
Track Adjustment
963 TRACK-TYPE LOADER
Front Idler Groups
963 TRACK-TYPE LOADER POWER TRAIN
Track Adjustment
963 TRACK-TYPE LOADER POWER TRAIN
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Idler Oil Fill Volume {4159, 4159}
Idler Oil Fill Volume {4159, 4159}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Disassembly and Assembly Procedures for Idlers with Inverted Duo-Cone Seals {4159, 7561, 7561}
Disassembly and Assembly Procedures for Idlers with Inverted Duo-Cone Seals {4159, 7561, 7561}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Disassembly and Assembly
Front Idlers And Yokes
963 TRACK-TYPE LOADER
Track Adjusters And Recoil Springs
963 TRACK-TYPE LOADER
Track Adjusters
963 TRACK-TYPE LOADER
Front Idlers &amp; Yokes
SUPPLEMENT FOR 943, 953, 963, 973 TRACK TYPE LOADER UNDERCAR
Adjustment Of Tracks
SUPPLEMENT FOR 943, 953, 963, 973 TRACK TYPE LOADER UNDERCAR
Track Adjusters
SUPPLEMENT FOR 943, 953, 963, 973 TRACK TYPE LOADER UNDERCAR
Track Recoil Springs
SUPPLEMENT FOR 943, 953, 963, 973 TRACK TYPE LOADER UNDERCAR
Service Magazine
Use Correct Specification For Track Adjustment; New Warning Plate Used{4157,7557}
1982/11/08
New Idler Guard Group Available{4150,4159}
1984/03/26
Procedure Available To Repair Worn Retainer Assemblies On Track Rollers And Idlers{4180,4159}
1985/02/11
New Undercarriage Components Used {4170,4155,4159,4169,4175,4180}
1986/07/07
Bottom Of Idler Swing Links Can Now Be Lubricated; New Link Assemblies And Seals Used On 963, 973 Loaders {4159}
1987/08/03
Track Guards Can Be Moved Forward To Give Longer Life To Track Adjuster Rod{4159,4170}
1988/02/22
Stronger Idler Recoil Springs Used In Front Idler Groups Prevents Track Indexing{4158}
1988/04/04
Stronger Track Adjuster Cylinders Used; High Temperature Seals Used In Steel Mill Arrangement{4157}
1988/06/13
Use New Tooling Setup To Remove Any Recoil Spring{0729,4158}
1988/08/15
Recommendations For Installing L-Shaped Rings In Front Idler Duo-Cone Seals {4159,7561}
1989/04/10
Additional Lubrication Points In Equalizer Bar Group And Front Idler Group; New Track Adjustment Procedure For New Track Roller Frames With Idler Guards{4157,4151,7104,7269}
1991/03/18
Adjustment of the Front Idler on Track-Type Loaders {4159}
2001/10/22
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10

Caterpillar Parts SIS Catalog 963 :

IDLER GP-FRONT
7P-2719 IDLER GP-FRONT
ENCLOSURE GP-ENGINE & TRANSMISSION
7P-2598 ENCLOSURE GP-ENGINE & TRANSMISSION
ENCLOSURE GP-ENGINE & TRANSMISSION
7P-2598 ENCLOSURE GP-ENGINE & TRANSMISSION
ENCLOSURE GP-ENGINE & TRANSMISSION
7P-2598 ENCLOSURE GP-ENGINE & TRANSMISSION
ENCLOSURE GP-ENGINE & TRANSMISSION
7P-2598 ENCLOSURE GP-ENGINE & TRANSMISSION
ENCLOSURE GP-ENGINE & TRANSMISSION
7P-2598 ENCLOSURE GP-ENGINE & TRANSMISSION
ENCLOSURE GP-ENGINE & TRANSMISSION
7P-2598 ENCLOSURE GP-ENGINE & TRANSMISSION
ENCLOSURE GP-ENGINE & TRANSMISSION
7P-2598 ENCLOSURE GP-ENGINE & TRANSMISSION
IDLER GP-FRONT
7P-2719 IDLER GP-FRONT
IDLER GP-FRONT
7P-2719 IDLER GP-FRONT
IDLER GP-FRONT
5G-7869 IDLER GP-FRONT
IDLER GP-FRONT
5G-7869 IDLER GP-FRONT
IDLER GP-FRONT
3W-8157 IDLER GP-FRONT
IDLER GP-FRONT
3W-8157 IDLER GP-FRONT
IDLER GP-FRONT
3W-8157 IDLER GP-FRONT
IDLER GP-FRONT
3W-8157 IDLER GP-FRONT

Truck sale:

Caterpillar 963K, track loaders, Construction
394,800 
Caterpillar 963K, track loaders, Construction
- track loaders
ZIEGLER CAT
Caterpillar 963K, track loaders, Construction
244,373 
Caterpillar 963K, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 963K, track loaders, Construction
386,250 
Caterpillar 963K, track loaders, Construction
- track loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar 963, track loaders, Construction
 
Caterpillar 963, track loaders, Construction
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 963K, track loaders, Construction
148,500 
Caterpillar 963K, track loaders, Construction
- track loaders
ALTORFER INDUSTRIES
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.