AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W5619 GOVERNOR & FUEL INJECTION PUMP GP S/N 29A789-1682 4W5620-PAGE 37.03, 6N0509-PAGE 43,5N9234-PAGE 59 3208


FUEL SYSTEM
GOVERNOR GP

GEN SET ENGINE 3208 GEN SET ENGINE 29A
 3208 GENERATOR SET ENGINE 29A00225-UP SEBP1372 3208 29A   (1982)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
1W-6806 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5619 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-0506 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-0505 PUMP GP-GOV & FUEL INJ
DRIVE GP-GOVERNOR & FUEL PUMP
6N-0805 DRIVE GP-GOVERNOR & FUEL PUMP
 

#SEBP13720120
 

4W-5619: PUMP GP-GOV & FUEL INJ

4W5619 GOVERNOR & FUEL INJECTION PUMP GP
S/N 29A789-1682
4W5620-PAGE 37.03, 6N0509-PAGE 43,5N9234-PAGE 59
c324738 SEBP1372
4W5619 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0509 Y [1] TORQUE CONTROL GP  
2. 4N-0443 [1] PIN-LOAD STOP  
  5N-9234 Y [1] SHUT-OFF GP-ELECTRICAL  
3. 4W-5620 Y [1] GOV & FUEL INJ PUMP GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13720121
 

9Y-0506: PUMP GP-GOV & FUEL INJ

9Y0506 GOVERNOR & FUEL INJECTION PUMP GP
S/N 29A1683-UP
9Y0509-PAGE 37.04
PART OF 9Y0505 PUMP
c410106 SEBP1372
9Y0506 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6804 [1] SPRING-GOVERNOR  
2. 4N-0508 [1] GASKET-COVER  
3. 4N-0527 [1] SPRING  
4. 2M-5471 [2] BOLT  
5. 4F-7957 [2] BOLT  
6. 3L-5987 [1] COVER  
  6L-5773 [1] GASKET  
7. 9Y-0509 YC [1] GOV & FUEL INJ PUMP GP  
8. 4N-1591 [1] COVER AS-SPRING  
  6N-0411 [1] COVER-TORQUE SPRING  
9. 6N-0412 [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER 1.52MM(.06IN.)THK  
  8F-1326 [1] WASHER .813MM(.032IN)THK  
10. 2P-3200 [1] BOLT-WASHER HEAD  
  1J-9671 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13720122
 

9Y-0505: PUMP GP-GOV & FUEL INJ

9Y0505 GOVERNOR & FUEL INJECTION PUMP GP
S/N 29A1683-UP ; 9Y0506-PAGE 36.02,5N9234-PAGE 59,6N0509-PAGE 43
FIELD REPLACEMENT ORDER 9Y0511-PAGE 37.01, 8C5524 SOLENIOD AS,1W9070
DIODE AS, 4N0117 SOLENOID GASKET & 2-4F7957 BOLT
c410105 SEBP1372
9Y0505 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0509 Y [1] TORQUE CONTROL GP  
2. 4N-0443 [1] PIN-LOAD STOP  
3. 5N-9234 Y [1] SHUT-OFF GP-ELECTRICAL  
4. 9Y-0506 Y [1] GOV & FUEL INJ PUMP GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13720123
 

6N-0805: DRIVE GP-GOVERNOR & FUEL PUMP

6N0805 DRIVE GP-GOVERNOR & FUEL INJECTION PUMP
S/N 29A225-1159
c220500 SEBP1372
6N0805 DRIVE GP-GOVERNOR & FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-1856 [1] SHAFT ASSEM.  
    (Includes)
2. 9L-9236 [1] SLEEVE  
3. 9N-5022 C [1] WASHER  
4. 4N-2968 [1] GEAR (69 teeth)  
5. 2N-5061 [1] GEAR (69 teeth)  
6. 5M-7516 [1] SCREW  
7. 8S-7499 [1] PIN  
8. 9L-7034 [1] WASHER  
  C   INDICATES CHANGE
 

#SEBP13720124
 

6N-0805: DRIVE GP-GOVERNOR & FUEL PUMP

6N0805 DRIVE GP-GOVERNOR & FUEL INJECTION PUMP
S/N 29A1160-UP
c338390 SEBP1372
6N0805 DRIVE GP-GOVERNOR & FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1603 C [1] BOLT  
2. 9L-7034 [1] WASHER  
3. 9N-5022 [1] WASHER-HARD  
4. 4W-9120 C [1] GEAR (69 TEETH)  
5. 4W-9118 C [1] GEAR (69 TEETH)  
6. 5M-7516 [1] SCREW-MACHINE  
7. 8S-7499 [1] PIN-SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13720125
 

9Y-0512: PUMP GP-GOV & FUEL INJ

9Y0512 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 29A1683-UP
9Y0509-PAGE 37.04, 6N0509-PAGE 43
PART OF 9Y0511 PUMP
c639691 SEBP1372
9Y0512 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6508 [1] SPRING (OUTER)  
2. 4N-5663 [1] SPRING (INNER)  
3. 4N-0527 [1] SPRING  
4. 7L-8070 [2] BOLT-HEAD  
5. 117-0287 [1] GASKET-TORQUE SPRING COVER  
6. 9Y-0509 Y [1] PUMP GP-GOV & FUEL INJ  
7. 134-3857 [1] COVER AS-TORQUE SPRING  
8. 6N-0412 [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER (1.52MM THK)  
  8F-1326 [1] WASHER (.813MM THK)  
9. 3K-8460 [1] PLUG  
  1J-9671 [1] SEAL-O-RING  
10. 3L-5987 [1] COVER  
11. 4F-7957 [4] BOLT  
12. 6L-5773 [1] GASKET  
13. 4N-8507 [1] COVER  
  2W-5447 [1] GASKET  
14. 6N-0509 Y [1] TORQUE CONTROL GP  
15. 4N-0443 [1] PIN-LOAD STOP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13720126
 

9Y-0511: PUMP GP-GOV & FUEL INJ

9Y0511 PUMP GP-GOVERNOR & FUEL INJECTION*R
S/N 29A1683-UP.
FIELD REPLACEMENT FOR 9Y0505-PAGE 36.02
SEBP13720126 SEBP1372
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  9Y-0512 Y [1] PUMP GP-GOVERNOR & FUEL INJECTION  
   
  9L-7630 [2] GASKET-AIR INLET  
   
  8M-5661 [1] SEAL  
   
  8M-8157 [1] SEAL  
   
  9M-9729 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13720127
 

1W-6805: PUMP GP-GOV & FUEL INJ

1W6805 GOVERNOR & FUEL INJECTION PUMP GP
S/N 29A225-788
8N5642-PAGE 38
PART OF 1W6806 GOVERNOR & FUEL INJECTION
c236262 SEBP1372
1W6805 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6804 [1] SPRING  
2. 6L-5773 [1] GASKET  
3. 4N-0527 [1] SPRING  
4. 2M-5471 [2] BOLT  
5. 4N-0508 [1] GASKET  
6. 8N-5642 Y [1] FUEL INJECTION PUMP GROUP  
    (Separate Illustration)
7. 4N-1591 [1] COVER ASSEM.  
    (Includes)
  6N-0411 [1] COVER  
8. 6N-0412 [1] MACHINE SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER 1.52mm(.06 in.)thick  
  8F-1326 [1] WASHER .813mm(.032 in.)thick  
9. 2P-3200 [1] BOLT  
  1J-9671 [1] SEAL  
10. 3L-5987 [1] COVER  
11. 4F-7957 [2] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13720128
 

4W-5620: PUMP GP-GOV & FUEL INJ

4W5620 GOVERNOR & FUEL INJECTION PUMP GP
S/N 29A789-UP
4W5641-PAGE 42A
PART OF 4W5619 GOVERNOR & FUEL INJECTION
c324737 SEBP1372
4W5620 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6804 [1] SPRING-GOVERNOR  
2. 4N-0508 [1] GASKET-COVER  
3. 4N-0527 [1] SPRING  
4. 2M-5471 [2] BOLT  
5. 4F-7957 [2] BOLT  
6. 3L-5987 [1] COVER  
  6L-5773 [1] GASKET  
7. 4W-5641 Y [1] GOV & FUEL INJ PUMP GP  
8. 4N-1591 [1] COVER AS-SPRING  
  6N-0411 [1] COVER-TORQUE SPRING  
9. 6N-0412 [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER 1.52MM(.06IN.)THK  
  8F-1326 [1] WASHER  
    .813MM(.032IN.)THK
10. 2P-3200 [1] BOLT-WASHER HEAD  
  1J-9671 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13720129
 

9Y-0509: PUMP GP-GOV & FUEL INJ

9Y0509 GOVERNOR & FUEL INJECTION PUMP GP-PART 1 OF 5
TYPE 1
PART OF 9Y0506 & 9Y0512 GOVERNOR & FUEL INJECTION PUMPS
c409696 SEBP1372
9Y0509 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-0510 [8] PUMP AS-FUEL INJECTION  
    (EACH INCLUDES)
2. 9N-5862 [1] SPRING-LIFTER  
3. 4N-2728 [1] WASHER-RETAINER  
4. 7W-8039 [8] BONNET-VALVE  
  8N-1415 [8] SPRING-CHECK  
  4W-5869 [8] VALVE-DELIVERY  
5. 4N-0224 [8] RING-RETAINER  
6. 7W-8120 [8] BUSHING  
7. 4N-2685 [8] ROLLER-LIFTER  
8. 6N-6794 [8] LIFTER-PLUNGER  
9. 6F-6672 [8] SEAL-O-RING  
10. 7N-1359 [1] FLANGE-INLET  
11. 2M-5471 [2] BOLT  
12. 4N-3088 [1] GASKET-INLET  
13. 7N-1364 [1] FLANGE AS-CHECK VALVE  
14. 1P-2298 [1] VALVE AS  
15. 4N-0975 [1] GASKET-CHECK VALVE  
16. 6N-1716 [1] VALVE AS  
17. 3J-7354 [1] SEAL-O-RING  
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Governor
3208 GENERATOR SET ENGINES
Governor And Fuel Injection Pump Drive Group
3208 GENERATOR SET ENGINES
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 GENERATOR SET ENGINE
Fuel Transfer Pump
3208 GENERATOR SET ENGINE
Governor
3208 GENERATOR SET ENGINE
Shutoff Housing, Check Valve And Bypass Valve
3208 GENERATOR SET ENGINE
Fuel Injection Pumps
3208 GENERATOR SET ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20

Caterpillar Parts SIS Catalog 3208 :

PUMP GP-GOV & FUEL INJ
1W-6806 PUMP GP-GOV & FUEL INJ
VALVE AS-PCV
7C-6353 VALVE AS-PCV
VALVE AS-PCV
9L-8790 VALVE AS-PCV
GAUGE GP-AIR CLEANER
2N-3322 GAUGE GP-AIR CLEANER
PRECLEANER AS
121-7746 PRECLEANER AS
AIR CLEANER GP
4W-9079 AIR CLEANER GP
PRECLEANER AS
4M-0310 PRECLEANER AS
AIR CLEANER GP
6I-2572 AIR CLEANER GP
PUMP GP-GOV & FUEL INJ
9Y-0506 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-0505 PUMP GP-GOV & FUEL INJ
DRIVE GP-GOVERNOR & FUEL PUMP
6N-0805 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
6N-0805 DRIVE GP-GOVERNOR & FUEL PUMP
PUMP GP-GOV & FUEL INJ
9Y-0512 PUMP GP-GOV & FUEL INJ
9Y-0511 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1W-6805 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5620 PUMP GP-GOV & FUEL INJ

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.