AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W5641 GOVERNOR & FUEL INJECTION PUMP GP-PART 5 OF 5 S/N 29A789-1682 PART OF 4W5620 GOVERNOR & FUEL INJECTION PUMP 3208


FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP
GOVERNOR GP
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-VOLTAGE
FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL

GEN SET ENGINE 3208 GEN SET ENGINE 29A
 3208 GENERATOR SET ENGINE 29A00225-UP SEBP1372 3208 29A   (1982)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
4W-5641 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5641 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5641 PUMP GP-GOV & FUEL INJ
CONTROL GP-GOVERNOR
9L-6743 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4W-3728 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
3N-7815 CONTROL GP-GOVERNOR
 

#SEBP13720150
 

4W-5641: PUMP GP-GOV & FUEL INJ

4W5641 GOVERNOR & FUEL INJECTION PUMP GP-PART 5 OF 5
S/N 29A789-1682
PART OF 4W5620 GOVERNOR & FUEL INJECTION PUMP
c335355 SEBP1372
4W5641 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4276 [1] SEAT-SPRING  
2. 4N-6408 [1] PISTON AS  
3. 4N-6406 [1] RING-SPACER  
4. 4N-6404 [1] RING-RETAINING  
5. 4N-6407 [1] SPOOL-DASHPOT  
6. 6N-2517 [1] SPRING-DASHPOT  
7. 2W-8623 [1] SEAT-SPRING  
8. 4N-0434 C [1] RISER-GOVERNOR  
9. 4N-2927 [2] RACE-BEARING THRUST  
  7M-7219 [1] BEARING-THRUST  
10. 4N-2953 [1] RING-LOCK  
11. 4N-3779 [1] KEY-CAMSHAFT  
12. 9N-3752 [1] CAMSHAFT AS  
  9N-3751 [1] CAMSHAFT-FUEL PUMP  
13. 8N-2663 [1] CARRIER-WEIGHT  
14. 8N-2662 [3] BOLT-SOCKET HEAD  
15. 4N-1723 [1] SHIELD-CARRIER  
16. 4N-0425 [3] WEIGHT-GOVERNOR  
17. 4N-0511 [3] DOWEL  
18. 4N-5482 [1] SHAFT-WEIGHT CARRIAGE  
19. 4N-9019 [1] DOWEL  
20. 9N-5822 [1] WASHER-THRUST  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13720151
 

9L-6743: CONTROL GP-GOVERNOR

9L6743 GOVERNOR CONTROL GP
c527787 SEBP1372
9L6743 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0984 [1] LEVER  
2. 5P-2534 [1] BOLT-FLANGE HEAD  
3. 6I-1810 [1] SPRING  
4. 9N-0983 [1] LEVER AS  
 

#SEBP13720152
 

6N-0509: TORQUE CONTROL GP

6N0509 TORQUE CONTROL GP
PART OF 1W6806, 4W5619, 9Y0505,9Y0512 GOVERNOR & FUEL INJECTION PUMP
c456524 SEBP1372
6N0509 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6452 [2] INSULATOR  
2. 8M-9064 [1] SHIM-SPRING  
3. 4L-7124 [1] BOLT  
4. 4N-3882 [1] CONTACT-STOP  
5. 4N-3881 [1] SCREW  
6. 9M-1311 [1] NUT-JAM  
7. 4N-3884 [1] WASHER-SPRING  
8. 4N-3883 [1] BAR-LOAD STOP  
9. 4L-6458 [1] NUT-FULL  
 

#SEBP13720153
 

4W-3728: CONTROL GP-GOVERNOR

4W3728 GOVERNOR CONTROL GP-POSITIVE LOCK
FOR USE WITH INSTRUMENT PANEL
AN ATTACHMENT
c330827 SEBP1372
4W3728 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-9183 [1] BRACKET  
2. 4F-7957 [2] BOLT  
  1B-4330 [2] NUT  
  3B-4504 [2] LOCKWASHER  
3. 2N-1274 [1] CONTROL-VERNIER  
4. 7L-7784 [1] CLEVIS AS  
5. 3S-2093 [1] STRAP-CABLE  
6. 7L-7785 [1] CLAMP-CABLE  
7. 4B-1229 [2] SCREW  
  4B-2047 [2] NUT  
  3B-4502 [2] LOCKWASHER  
8. 3N-7820 [1] BRACKET  
9. 6H-1717 [2] BOLT  
  5P-8245 [2] WASHER  
 

#SEBP13720154
 

5N-9175: CONTROL GP-VOLTAGE

5N9175 CONTROL GP-32 VOLT DC RELAY
FOR USE WITH 2W8901, 2W8903, 2W8905, 2W8907, 4W9601 & 4W9602
JUNCTION BOXES. FOR USAGE REFER TO 5N8487 CHART-PAGE 59.01
AN ATTACHMENT
c548556 SEBP1372
5N9175 CONTROL GP-VOLTAGE Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1909 [1] RESISTOR AS  
2. 1S-9593 [3] STRAP-CABLE  
3. 5P-6009 DB TUBE  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP13720155
 

5N-9174: CONTROL GP-VOLTAGE

5N9174 GOVERNOR CONTROL GP-12 VOLT DC RELAY
FOR USE WITH 2W8901, 2W8903, 2W8905, 2W8907,
4W9601 & 4W9602 JUNCTION BOXES.
AN ATTACHMENT
c548550 SEBP1372
5N9174 CONTROL GP-VOLTAGE Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-9362 [1] RELAY AS  
 

#SEBP13720156
 

106-0447: CONTROL GP-MANUAL VOLTAGE

1060447 CONTROL GP-VOLTAGE-MANUAL
12 VOLT DC RELAY
AN ATTACHMENT
c564679 SEBP1372
1060447 CONTROL GP-MANUAL VOLTAGE Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-9362 [2] RELAY AS  
 

#SEBP13720157
 

3N-7815: CONTROL GP-GOVERNOR

3N7815 GOVERNOR CONTROL GP-POSITIVE LOCK
AN ATTACHMENT
c528639 SEBP1372
3N7815 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-9183 [1] BRACKET  
2. 4F-7957 [2] BOLT  
  9S-8750 [2] NUT-FULL  
  5P-0537 [4] WASHER  
3. 2W-0419 C [1] BRACKET-SUPPORT  
4. 7L-7784 [1] CLEVIS AS  
5. 2N-1274 [1] CONTROL-VERNIER  
6. 7L-7785 [1] CLAMP-CABLE  
7. 4B-1229 [2] SCREW  
  4B-2047 [2] NUT  
  7X-0620 [2] WASHER-HARD  
8. 3N-7820 [1] BRACKET  
9. 0S-1594 [2] BOLT 25.4MM(1.0IN)LG  
  5M-2894 [2] WASHER 18.5MM(.792IN)OD  
    -OR-
  6H-1717 C [2] BOLT 28.58MM(1.125IN)LG  
  5P-8245 C [2] WASHER 25.5MM(1.004IN)OD  
10. 3S-2093 [1] STRAP-CABLE  
11. 5M-2894 B [4] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13720158
 

9N-0552: LINES GP-FUEL FILTER

9N0552 FUEL FILTER LINES GP
S/N 29A225-580
c158075 SEBP1372
9N0552 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-2417 C [1] BRACKET AS  
2. 030-6816 [2] ELBOW  
3. 1J-9671 [2] SEAL-O-RING  
4. 031-4847 [1] SPACER  
5. 9N-0855 [1] TUBE AS-BLEED  
6. 4H-8878 [1] CLIP  
7. 1A-5350 [1] CLIP  
8. 9N-0856 [1] TUBE AS-OUTLET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13720159
 

9N-0552: LINES GP-FUEL FILTER

9N0552 FUEL FILTER LINES GP
S/N 29A581-UP
c706723 SEBP1372
9N0552 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-1707 [1] BRACKET AS-BLEED FITTING  
2. 030-6816 [2] ELBOW  
3. 1J-9671 [2] SEAL-O-RING  
4. 033-3083 C [1] BRACKET-SPRING  
5. 9N-0855 [1] TUBE AS-BLEED  
6. 4H-8878 [1] CLIP  
7. 1A-5350 [1] CLIP  
8. 9N-0856 [1] TUBE AS-OUTLET  
9. 9N-2061 C [1] CLIP  
10. 2A-0762 C [1] BOLT  
  9S-8750 C [1] NUT-FULL  
  5P-0537 C [2] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Governor
3208 GENERATOR SET ENGINES
Governor And Fuel Injection Pump Drive Group
3208 GENERATOR SET ENGINES
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 GENERATOR SET ENGINE
Fuel Transfer Pump
3208 GENERATOR SET ENGINE
Governor
3208 GENERATOR SET ENGINE
Shutoff Housing, Check Valve And Bypass Valve
3208 GENERATOR SET ENGINE
Fuel Injection Pumps
3208 GENERATOR SET ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20

Caterpillar Parts SIS Catalog 3208 :

PUMP GP-GOV & FUEL INJ
4W-5641 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5641 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5641 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5641 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
8N-5642 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
8N-5642 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
8N-5642 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
8N-5642 PUMP GP-GOV & FUEL INJ
CONTROL GP-GOVERNOR
9L-6743 CONTROL GP-GOVERNOR
TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP
CONTROL GP-GOVERNOR
4W-3728 CONTROL GP-GOVERNOR
CONTROL GP-VOLTAGE
5N-9175 CONTROL GP-VOLTAGE
CONTROL GP-VOLTAGE
5N-9174 CONTROL GP-VOLTAGE
CONTROL GP-MANUAL VOLTAGE
106-0447 CONTROL GP-MANUAL VOLTAGE
CONTROL GP-GOVERNOR
3N-7815 CONTROL GP-GOVERNOR
LINES GP-FUEL FILTER
9N-0552 LINES GP-FUEL FILTER

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.