OPERATOR STATION
CONTROL GP-HYDRAULICCONTROL GP-STEERING
CONTROL GP-TRANSMISSION
OPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP13770740
9V-1303: CONTROL GP-HYDRAULIC HAND
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7F-2050 | [6] | LOCKNUT (3/4-16-THD) | |
| 2. | 2P-1281 | [3] | ADAPTER-STRAINER | |
| 3. | 5V-4044 I | [1] | HOSE AS | |
| 4. | 0L-1351 | [4] | BOLT (3/8-16X0.875-IN) | |
| 4B-4278 | [4] | WASHER (10.2X20.5X1.6-MM THK) | ||
| 5. | 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 6. | 0L-1466 | [2] | SPRING-HUB SEAL | |
| 2D-6414 | [4] | WASHER (0.281X1.406X0.188-IN THK) | ||
| 7. | 7M-0706 | [1] | KNOB | |
| 8. | 1V-8222 | [1] | LEVER AS | |
| 9. | 7V-9537 | [1] | BRACKET AS | |
| 9F-6445 | [1] | NUT-WELD (1/4-20-THD) | ||
| 10. | 9F-2978 | [4] | NUT-WELD (3/8-16-THD) | |
| 11. | 1V-8223 | [2] | SPACER | |
| 12. | 2H-3903 | [2] | SETSCREW-SOCKET | |
| 13. | 1V-8224 | [1] | SHAFT | |
| 14. | 0S-0509 | [4] | BOLT (3/8-16X0.75-IN) | |
| 15. | 9J-4142 Y | [1] | VALVE GP (PILOT CONT TILT & LIFT) | |
| 16. | 9S-1921 I | [1] | HOSE AS | |
| 17. | 005-4173 | [1] | ELBOW | |
| 2M-9780 | [1] | SEAL-O-RING | ||
| 18. | 8M-0505 | [1] | ADAPTER | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 19. | 2P-2204 | [3] | ELBOW-UNION | |
| 20. | 8M-0547 | [3] | ELBOW-FLARED (SWIVEL) | |
| 21. | 2R-6806 | [1] | CONNECTOR | |
| 22. | 8K-8604 | [2] | BOOT | |
| 23. | 2P-1279 | [1] | LOCKNUT (9/16-18-THD) | |
| 24. | 4F-7957 | [9] | BOLT (1/4-20X0.875-IN) | |
| 3N-4895 | [9] | NUT AS-SPRING | ||
| 5P-4115 | [9] | WASHER-HARD (7.2X19X2-MM THK) | ||
| 25. | 4V-0359 | [1] | SHEET AS | |
| 26. | 5V-9004 | [1] | PLATE AS | |
| 9D-4439 | [6] | STUD-WELD (3/8-16X1-IN) | ||
| 27. | 2K-4973 | [6] | LOCKNUT (3/8-16-THD) | |
| 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 28. | 9K-4848 | [4] | WASHER-THRUST | |
| 29. | 2P-7215 | [1] | ELBOW | |
| 30. | 3J-1907 | [5] | SEAL-O-RING | |
| 31. | 9L-0191 | [2] | BEARING | |
| 32. | 7V-7699 | [1] | LEVER | |
| 33. | 9S-4606 I | [5] | HOSE AS | |
| 34. | 8M-0506 | [5] | ADAPTER-O-RING | |
| 35. | 030-7962 | [1] | ELBOW | |
| 36. | 4B-3057 | [3] | PIN-CLEVIS | |
| 37. | 3B-4607 | [5] | PIN-COTTER | |
| 38. | 5P-0537 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 39. | 7B-5005 | [2] | END-YOKE ROD | |
| 40. | 6F-0612 | [6] | NUT-JAM (1/4-28-THD) | |
| 41. | 3F-7674 | [3] | LOCKNUT (1/4-28-THD) | |
| 42. | 1V-8225 | [2] | ROD | |
| 43. | 7V-1855 | [2] | ROD END | |
| 44. | 4B-4276 | [4] | WASHER (7X16X1.6-MM THK) | |
| 45. | 2H-3903 | [2] | SETSCREW-SOCKET | |
| 46. | 1V-8228 | [1] | SHAFT | |
| 1V-8230 | [1] | SPACER (0.531X1X0.57-IN THK) | ||
| 9K-4848 | [2] | WASHER-THRUST | ||
| 47. | 1V-9371 | [1] | LEVER AS | |
| 48. | 1V-9240 | [2] | ROLLER-CAM | |
| 49. | 4V-6545 | [2] | SPRING | |
| 50. | 0S-1615 | [4] | BOLT (1/4-20X0.75-IN) | |
| 51. | 9G-9891 | [2] | SOLENOID AS | |
| 52. | 031-2701 | [1] | BOLT-LOCKING (5/16-18X1.25-IN) | |
| 53. | 0S-1613 | [1] | BOLT (1/4-20X0.375-IN) | |
| 54. | 7J-0435 | [2] | ROD (END) | |
| 55. | 9S-1303 | [2] | PIN | |
| 56. | 3V-0075 | [2] | LINK | |
| 57. | 8H-9620 | [1] | WASHER | |
| 58. | 2L-9038 | [4] | LOCKNUT (1/4-28-THD) | |
| 59. | 0L-1590 | [2] | BOLT (1/4-28X1.125-IN) | |
| 5P-0537 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 60. | 2A-0762 | [1] | BOLT (1/4-20X0.625-IN) | |
| 1B-4330 | [1] | NUT (1/4-20-THD) | ||
| 61. | 7V-7663 Y | [1] | CONTROL GP-HYDRAULIC HAND | |
| 62. | 1B-2713 | [2] | BOLT (1/4-20X1.75-IN) | |
| 5K-9214 | [2] | NUT (1/4-20-THD) | ||
| 63. | 8M-2771 | [2] | CLIP | |
| 64. | 4V-3277 | [1] | LEVER AS | |
| 65. | 9L-0191 | [2] | BEARING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770741
9V-1303: CONTROL GP-HYDRAULIC HAND
9V-1303 CONTROL GP-HYDRAULIC HAND
S/N 49Z304-1615
PART OF 7V-0011 OPERATOR AR
S/N 49Z304-1615
PART OF 7V-0011 OPERATOR AR
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7F-2050 | [6] | LOCKNUT (3/4-16-THD) | |
| 2. | 2P-1281 | [3] | ADAPTER-STRAINER | |
| 3. | 5V-4044 I | [1] | HOSE AS | |
| 4. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
| 5. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 6. | 0L-1466 | [2] | SPRING-HUB SEAL | |
| 2D-6414 | [4] | WASHER (0.281X1.406X0.188-IN THK) | ||
| 7. | 7M-0706 | [1] | KNOB (GEARSHIFT) | |
| 8. | 1V-8222 | [1] | LEVER AS (TILT CONT) | |
| 9. | 7V-9537 | [1] | BRACKET AS | |
| 9F-6445 | [1] | NUT-WELD (1/4-20-THD) | ||
| 10. | 9F-2978 | [4] | NUT-WELD (3/8-16-THD) | |
| 11. | 1V-8223 | [2] | SPACER | |
| 12. | 4B-6060 C | [2] | SETSCREW-SOCKET (1/4-20X0.375-IN) | |
| 13. | 1V-8224 | [1] | SHAFT | |
| 14. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 15. | 9J-4142 Y | [1] | VALVE GP (PILOT CONT TILT & LIFT) | |
| 16. | 9C-3444 I | [1] | HOSE AS | |
| 17. | 005-4173 | [1] | ELBOW | |
| 2M-9780 | [1] | SEAL-O-RING | ||
| 18. | 8M-0505 | [1] | ADAPTER (FLARED) | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 19. | 2P-2204 | [3] | ELBOW-UNION | |
| 8T-4994 C | [3] | WASHER-HARD (20X36.5X3.5-MM THK) | ||
| 20. | 8M-0547 | [3] | ELBOW-FLARED (SWIVEL) | |
| 21. | 8T-4205 C | [9] | WASHER-HARD (7.2X14.5X2-MM THK)(PLATED) | |
| 22. | 8K-8604 | [2] | BOOT | |
| 23. | 2P-1279 | [1] | LOCKNUT (9/16-18-THD)(BULKHEAD) | |
| 24. | 1H-3337 C | [9] | BOLT (1/4-20X0.875-IN) | |
| 8T-9370 C | [9] | NUT AS-SPRING | ||
| 25. | 4V-0359 | [1] | SHEET AS | |
| 26. | 5V-9004 | [1] | PLATE AS | |
| 9D-4439 | [6] | STUD-WELD (3/8-16X1-IN) | ||
| 27. | 2K-4973 | [6] | LOCKNUT (3/8-16-THD) | |
| 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 28. | 9K-4848 | [6] | WASHER-THRUST | |
| 29. | 2P-7215 | [1] | ELBOW | |
| 30. | 3J-1907 | [5] | SEAL-O-RING | |
| 31. | 3V-0060 | [2] | BEARING | |
| 32. | 7V-7699 | [1] | LEVER (LIFT DETENT) | |
| 33. | 9C-3613 CI | [5] | HOSE AS | |
| 34. | 8M-0506 | [5] | ADAPTER-O-RING | |
| 35. | 5V-8193 | [2] | TAG-IDENTIFICATION | |
| 36. | 4B-3057 | [3] | PIN-CLEVIS | |
| 37. | 3B-4607 | [5] | PIN-COTTER | |
| 38. | 8T-4205 C | [9] | WASHER-HARD (7.2X14.5X2-MM THK)(PLATED) | |
| 39. | 7B-5005 | [2] | END-YOKE ROD | |
| 40. | 4V-3277 | [1] | LEVER AS (LIFT CONTROL) | |
| 41. | 9L-0191 | [2] | BEARING | |
| 42. | 1V-8225 | [2] | ROD | |
| 43. | 7V-1855 | [2] | ROD END | |
| 44. | 9K-4848 | [2] | WASHER-THRUST | |
| 45. | 4B-6060 C | [2] | SETSCREW-SOCKET (1/4-20X0.375-IN) | |
| 46. | 1V-8228 | [1] | SHAFT | |
| 1V-8230 | [1] | SPACER (0.531X1X0.57-IN THK) | ||
| 47. | 1V-9371 | [1] | LEVER AS (TILT DETENT) | |
| 48. | 1V-9240 | [2] | ROLLER-CAM | |
| 49. | 7D-9722 | [2] | SPRING | |
| 50. | 5P-2675 | [2] | BOLT (1/4-20X1.75-IN) | |
| 5K-9214 | [2] | NUT (1/4-20-THD) | ||
| 51. | 9X-5301 | [2] | SOLENOID AS | |
| (EACH INCLUDES) | ||||
| 6V-8377 C | [2] | NUT (8-32-THD) | ||
| 9B-7233 C | [1] | LOCKWASHER | ||
| 9G-9508 | [1] | BOOT | ||
| 52. | 031-2701 | [1] | BOLT-LOCKING (5/16-18X1.25-IN) | |
| 53. | 6V-1322 | [1] | BOLT (1/4-20X0.375-IN) | |
| 54. | 7J-0435 | [2] | ROD | |
| 55. | 9S-1303 | [2] | PIN | |
| 56. | 3V-0075 | [2] | LINK | |
| 57. | 8H-9620 | [1] | WASHER | |
| 58. | 8M-2771 | [2] | CLIP | |
| 59. | 7F-3531 C | [2] | BOLT (1/4-28X1.25-IN) | |
| 60. | 8T-9364 C | [4] | BOLT (1/4-20X0.625-IN) | |
| 61. | 7V-7663 Y | [1] | CONTROL GP-HYDRAULIC HAND | |
| 62. | 2L-9038 C | [3] | LOCKNUT (1/4-28-THD) | |
| 63. | 0S-1570 C | [1] | BOLT (1/4-28X0.625-IN) | |
| 64. | 6V-8187 C | [6] | NUT (1/4-28-THD) | |
| 65. | 3F-7674 C | [6] | LOCKNUT (1/4-28-THD) | |
| 66. | 3H-6782 C | [2] | SPACER (5/8-17/64X11/32-IN THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770742
1V-4909: CONTROL GP-STEERING
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1V-6282 | [1] | SPINNER AS | |
| 2. | 1V-9385 | [1] | COVER-EMBLEM | |
| 3. | 9K-5635 | [3] | SCREW-TAPPING (8-18X1-IN) | |
| 4. | 032-5678 | [1] | STEERING WHEEL | |
| 5. | 1S-6106 | [1] | RING-SNAP | |
| 6. | 6K-8161 | [1] | BALL BEARING | |
| 7. | 5H-6480 | [1] | RING-RETAINING | |
| 8. | 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | |
| 3B-4506 | [4] | LOCKWASHER | ||
| 9. | 2R-6806 | [1] | CONNECTOR | |
| 10. | 3J-1907 | [4] | SEAL-O-RING | |
| 11. | 030-7947 | [3] | ELBOW | |
| 12. | 2V-3219 I | [1] | HOSE AS (65.6CM) | |
| 13. | 3V-5648 I | [1] | HOSE AS | |
| 14. | 2P-1278 | [4] | UNION | |
| 15. | 2P-1279 | [4] | LOCKNUT (9/16-18-THD) | |
| 16. | 4V-6133 I | [1] | HOSE AS | |
| 17. | 3G-7595 CY | [1] | PUMP GP-METERING (HMU) | |
| 18. | 1V-6349 | [1] | SHAFT AS | |
| 19. | 9K-5636 | [1] | BALL BEARING | |
| 20. | 9S-1354 | [1] | NUT (5/8-18-THD) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 4B-4281 | [1] | WASHER (16.8X33X2.5-MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770743
1V-4909: CONTROL GP-STEERING
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1V-6282 | [1] | SPINNER AS | |
| 2. | 1V-9385 | [1] | COVER-EMBLEM | |
| 3. | 9K-5635 | [3] | SCREW-TAPPING (8-18X1-IN) | |
| 4. | 032-5678 | [1] | STEERING WHEEL | |
| 5. | 1S-6106 | [1] | RING-SNAP | |
| 6. | 6K-8161 | [1] | BALL BEARING | |
| 7. | 5H-6480 | [1] | RING-RETAINING | |
| 8. | 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | |
| 3B-4506 | [4] | LOCKWASHER | ||
| 9. | 2R-6806 | [1] | CONNECTOR | |
| 10. | 3J-1907 | [4] | SEAL-O-RING | |
| 11. | 030-7947 | [3] | ELBOW | |
| 12. | 2V-4726 CI | [1] | HOSE AS (63.5CM) | |
| 13. | 3V-5648 CI | [2] | HOSE AS | |
| 14. | 2P-1278 | [4] | UNION | |
| 15. | 2P-1279 | [4] | LOCKNUT (9/16-18-THD) | |
| 16. | 4V-6133 I | [1] | HOSE AS | |
| 17. | 3G-7595 Y | [1] | PUMP GP-METERING (HMU) | |
| 18. | 1V-6349 | [1] | SHAFT AS | |
| 19. | 6V-8914 C | [1] | BALL BEARING | |
| 20. | 9S-1354 | [1] | NUT (5/8-18-THD) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 4B-4281 | [1] | WASHER (16.8X33X2.5-MM THK) | ||
| 21. | 6K-9194 C | [1] | ELBOW | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770744
1V-4909: CONTROL GP-STEERING
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1V-6282 | [1] | SPINNER AS | |
| 2. | 1V-9385 | [1] | COVER-EMBLEM | |
| 3. | 9K-5635 | [3] | SCREW-TAPPING (8-18X1-IN) | |
| 4. | 032-5678 | [1] | STEERING WHEEL | |
| 5. | 1S-6106 | [1] | RING-SNAP | |
| 6. | 6K-8161 | [1] | BALL BEARING | |
| 7. | 5H-6480 | [1] | RING-RETAINING | |
| 8. | 9B-7237 | [4] | BOLT (3/8-16X1.25-IN) | |
| 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 9. | 030-7962 C | [1] | ELBOW | |
| 10. | 3J-1907 | [4] | SEAL-O-RING | |
| 11. | 030-7947 C | [4] | ELBOW | |
| 12. | 2V-4726 I | [1] | HOSE AS | |
| 13. | 3V-5648 I | [2] | HOSE AS | |
| 14. | 2P-1278 | [4] | UNION | |
| 15. | 2P-1279 | [4] | LOCKNUT (9/16-18-THD) | |
| 16. | 4V-6133 I | [1] | HOSE AS | |
| 17. | 3G-7595 Y | [1] | PUMP GP-METERING (HMU) | |
| 18. | 1V-6349 | [1] | SHAFT AS | |
| 19. | 6V-8914 | [1] | BALL BEARING | |
| 20. | 9S-1354 | [1] | NUT (5/8-18-THD) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 4B-4281 | [1] | WASHER (16.8X33X2.5-MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770745
1V-4909: CONTROL GP-STEERING
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1V-6282 | [1] | SPINNER AS | |
| 2. | 1V-9385 | [1] | COVER-EMBLEM | |
| 3. | 9K-5635 | [3] | SCREW-TAPPING (8-18X1-IN) | |
| 4. | 032-5678 | [1] | STEERING WHEEL | |
| 5. | 1S-6106 | [1] | RING-SNAP | |
| 6. | 6K-8161 | [1] | BALL BEARING | |
| 7. | 5H-6480 | [1] | RING-RETAINING | |
| 8. | 9B-7237 | [4] | BOLT (3/8-16X1.25-IN) | |
| 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 9. | 030-7962 C | [1] | ELBOW | |
| 10. | 3J-1907 | [4] | SEAL-O-RING | |
| 11. | 030-7947 C | [4] | ELBOW | |
| 12. | 2V-4726 I | [1] | HOSE AS | |
| 13. | 3V-5648 I | [2] | HOSE AS | |
| 14. | 2P-1278 | [4] | UNION | |
| 15. | 2P-1279 | [4] | LOCKNUT (9/16-18-THD) | |
| 16. | 4V-6133 I | [1] | HOSE AS | |
| 17. | 6E-2726 Y | [1] | PUMP GP-METERING (HMU) | |
| 18. | 1V-6349 | [1] | SHAFT AS | |
| 19. | 6V-8914 | [1] | BALL BEARING | |
| 20. | 9S-1354 | [1] | NUT (5/8-18-THD) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 4B-4281 | [1] | WASHER (16.8X33X2.5-MM THK) | ||
| 21. | 3F-9559 | [4] | LOCKWASHER | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770746
1V-5927: CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3K-1644 | [1] | SCREW (5/16-18X2.75-IN) | |
| 2. | 6K-5177 | [1] | HANDLE-SHIFT | |
| 3. | 1V-6347 | [1] | SHAFT | |
| 4. | 3V-3056 | [1] | COLLAR-INDICATOR | |
| 5. | 5B-9324 | [1] | SETSCREW | |
| 6. | 1V-6343 | [1] | LEVER AS | |
| 7. | 2M-2489 | [1] | SEAL-LIP TYPE | |
| 8. | 1V-5326 | [2] | BEARING | |
| 9. | 9K-6605 | [1] | SPACER | |
| 10. | 1V-9809 | [1] | RETAINER | |
| 11. | 5S-7046 | [1] | RING-RETAINING | |
| 12. | 2V-9009 | [1] | RACK | |
| 13. | 2V-3713 | [1] | STOP | |
| 14. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 15. | 010-2571 | [3] | SETSCREW-SOCKET (1/4-20X0.31-IN) | |
| 16. | 1V-6342 | [1] | GEAR AS | |
| 1V-5326 | [1] | BEARING | ||
| 17. | 4V-3059 | [1] | BELLCRANK | |
| 18. | 3V-5561 | [1] | CABLE AS (SPEED) | |
| 19. | 3V-5560 | [1] | CABLE AS (DIRECTIONAL) | |
| 20. | 5P-0537 C | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 21. | 7B-2742 | [3] | BOLT (1/4-20X1.25-IN) | |
| 22. | 4V-0031 | [1] | CLAMP | |
| 23. | 1V-6348 | [1] | PIN | |
| 24. | 3K-9042 | [2] | RING-RETAINING | |
| 25. | 9L-2685 | [2] | BALL JOINT AS | |
| 26. | 6F-0612 | [3] | NUT-JAM (1/4-28-THD) | |
| 27. | 3B-4504 | [1] | LOCKWASHER | |
| 28. | 4V-3058 | [1] | PIN | |
| 29. | 010-2570 | [2] | SETSCREW (1/4-20X0.375-IN)(9.53MM .375IN LG) | |
| 30. | 2V-6076 | [1] | CAM | |
| 31. | 3V-3876 | [1] | END-YOKE | |
| 32. | 8D-5294 | [2] | RING | |
| 8D-5295 | [2] | PIN | ||
| 33. | 2V-6078 | [2] | BRACKET | |
| 34. | 7V-3788 CY | [1] | LOCK GP-TRANSMISSION CONTROL | |
| 35. | 1H-9696 | [1] | SEAL-O-RING | |
| 36. | 9S-4190 | [3] | PLUG-O-RING (7/8-14-THD) | |
| 37. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 38. | 3B-4506 C | [4] | LOCKWASHER | |
| 39. | 1V-6341 | [2] | SEAL | |
| 40. | 4D-3704 | [2] | WASHER-HARD (17X30X5-MM THK) | |
| 41. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 42. | 6F-0612 | [1] | NUT-JAM (1/4-28-THD) | |
| 43. | 8B-3768 | [1] | ROD END | |
| 44. | 4F-7952 | [2] | SEAL-O-RING | |
| 45. | 1T-0765 | [2] | BOLT (3/8-16X1-IN) | |
| 46. | 5P-9297 C | [4] | CLIP (LOOP) | |
| 47. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 48. | 1B-4330 | [3] | NUT (1/4-20-THD) | |
| 1H-3338 | [3] | LOCKWASHER (EXTERNAL TOOTH) | ||
| 49. | 1B-7904 | [2] | SPACER (6.8X10X9.5-MM THK) | |
| 50. | 0S-1615 | [1] | BOLT (1/4-20X0.75-IN) | |
| 51. | 2V-3216 | [2] | CLIP | |
| 52. | 2V-3222 | [1] | RETAINER | |
| 53. | 2V-3215 | [1] | SEAL | |
| 54. | 5M-2894 C | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 55. | 7V-0580 C | [1] | BRACKET AS | |
| 56. | 9F-2978 | [3] | NUT-WELD (3/8-16-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770747
1V-5927: CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3K-1644 | [1] | SCREW (5/16-18X2.75-IN) | |
| 2. | 6K-5177 | [1] | HANDLE-SHIFT | |
| 3. | 1V-6347 | [1] | SHAFT | |
| 4. | 3V-3056 | [1] | COLLAR-INDICATOR | |
| 5. | 5B-9324 | [1] | SETSCREW | |
| 6. | 1V-6343 | [1] | LEVER AS | |
| 7. | 2M-2489 | [1] | SEAL-LIP TYPE | |
| 8. | 1V-5326 | [2] | BEARING | |
| 9. | 9K-6605 | [1] | SPACER | |
| 10. | 1V-9809 | [1] | RETAINER | |
| 11. | 5S-7046 | [1] | RING-RETAINING | |
| 12. | 2V-9009 | [1] | RACK | |
| 13. | 2V-3713 | [1] | STOP | |
| 14. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 15. | 010-2571 | [3] | SETSCREW-SOCKET (1/4-20X0.31-IN) | |
| 16. | 1V-6342 | [1] | GEAR AS | |
| 1V-5326 | [1] | BEARING | ||
| 17. | 4V-3059 | [1] | BELLCRANK | |
| 18. | 7T-2091 C | [1] | CABLE AS (SPEED) | |
| 19. | 7T-2090 C | [1] | CABLE AS (DIRECTIONAL) | |
| 20. | 5P-0537 C | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 21. | 7B-2742 | [3] | BOLT (1/4-20X1.25-IN) | |
| 22. | 4V-0031 | [1] | CLAMP | |
| 23. | 1V-6348 | [1] | PIN | |
| 24. | 3K-9042 | [2] | RING-RETAINING | |
| 25. | 9L-2685 | [2] | BALL JOINT AS | |
| 26. | 5S-9607 C | [3] | LOCKNUT | |
| 27. | 010-2570 | [2] | SETSCREW (1/4-20X0.375-IN)(9.53MM .375IN LG) | |
| 28. | 4V-3058 | [1] | PIN | |
| 29. | 2V-6076 | [1] | CAM | |
| 30. | 4V-0074 C | [1] | END-YOKE | |
| 31. | 8D-5294 | [2] | RING | |
| 8D-5295 | [2] | PIN | ||
| 32. | 2V-6078 C | [1] | BRACKET | |
| 33. | 7V-3788 Y | [1] | LOCK GP-TRANSMISSION CONTROL | |
| 34. | 1H-9696 | [1] | SEAL-O-RING | |
| 35. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 36. | 7V-0580 | [1] | BRACKET AS | |
| 37. | 9F-2978 | [3] | NUT-WELD (3/8-16-THD) | |
| 38. | 1V-6341 | [2] | SEAL | |
| 39. | 5P-8247 C | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 40. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 41. | 5S-9607 C | [1] | LOCKNUT | |
| 42. | 8B-3768 | [1] | ROD END | |
| 43. | 4F-7952 | [2] | SEAL-O-RING | |
| 44. | 1T-0765 | [2] | BOLT (3/8-16X1-IN) | |
| 45. | 5P-9297 | [4] | CLIP (LOOP) | |
| 46. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 47. | 1B-4330 | [3] | NUT (1/4-20-THD) | |
| 5P-0537 C | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 48. | 1B-7904 | [2] | SPACER (6.8X10X9.5-MM THK) | |
| 49. | 0S-1615 | [1] | BOLT (1/4-20X0.75-IN) | |
| 50. | 2V-3216 | [2] | CLIP | |
| 51. | 2V-3222 | [1] | RETAINER | |
| 52. | 2V-3215 | [1] | SEAL | |
| 53. | 5M-2894 C | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 54. | 5V-8377 C | [1] | BRACKET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770748
1V-5927: CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3K-1644 | [1] | SCREW (5/16-18X2.75-IN)(MACHINE) | |
| 2. | 6K-5177 | [1] | HANDLE-SHIFT | |
| 3. | 1V-6347 | [1] | SHAFT | |
| 4. | 1V-6346 C | [1] | COLLAR-INDICATOR | |
| 5. | 5B-9324 | [1] | SETSCREW (SOCKET) | |
| 6. | 1V-6343 | [1] | LEVER AS | |
| 7. | 2M-2489 | [1] | SEAL-LIP TYPE | |
| 8. | 1V-5326 | [2] | BEARING | |
| 9. | 9K-6605 | [1] | SPACER | |
| 10. | 1V-9809 | [1] | RETAINER | |
| 11. | 5S-7046 | [1] | RING-RETAINING | |
| 12. | 2V-9009 | [1] | RACK | |
| 13. | 2V-3713 | [1] | STOP | |
| 14. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 15. | 010-2571 | [3] | SETSCREW-SOCKET (1/4-20X0.31-IN) | |
| 16. | 1V-6342 | [1] | GEAR AS | |
| 1V-5326 | [1] | BEARING | ||
| 17. | 4V-3059 | [1] | BELLCRANK | |
| 18. | 7T-2091 | [1] | CABLE AS (SPEED) | |
| 19. | 7T-8996 C | [1] | CABLE AS (DIRECTIONAL) | |
| 20. | 5P-0537 C | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 21. | 7B-2742 | [3] | BOLT (1/4-20X1.25-IN) | |
| 22. | 4V-0031 | [1] | CLAMP | |
| 23. | 1V-6348 | [1] | PIN | |
| 24. | 3K-9042 | [2] | RING-RETAINING | |
| 25. | 9L-2685 | [2] | BALL JOINT AS | |
| 26. | 1B-4201 C | [2] | NUT-FULL (1/4-28-THD) | |
| 27. | 010-2570 | [2] | SETSCREW (1/4-20X0.375-IN)(SOCKET 9.53MM .375IN LG) | |
| 28. | 4V-3058 | [1] | PIN | |
| 29. | 5S-9607 C | [1] | LOCKNUT | |
| 30. | 5V-8377 | [1] | BRACKET | |
| 31. | 5M-2894 C | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 32. | 8D-5294 C | [1] | RING | |
| 8D-5295 C | [1] | PIN | ||
| 33. | 2V-3215 | [1] | SEAL | |
| 34. | 2V-3222 | [1] | RETAINER | |
| 35. | 2V-3216 | [2] | CLIP | |
| 36. | 9S-1354 C | [1] | NUT (5/8-18-THD) | |
| 37. | 7V-0580 | [1] | BRACKET AS | |
| 38. | 9F-2978 | [3] | NUT-WELD (3/8-16-THD) | |
| 39. | 1V-6341 | [2] | SEAL | |
| 40. | 5P-8247 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 41. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 42. | 1B-4201 C | [2] | NUT-FULL (1/4-28-THD) | |
| 43. | 8B-3768 | [1] | ROD END | |
| 44. | 8T-7320 C | [1] | SEAL (44.92-MM ID) | |
| 45. | 0S-1615 | [1] | BOLT (1/4-20X0.75-IN) | |
| 46. | 5P-9297 | [4] | CLIP (LOOP) | |
| 47. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 48. | 1B-4330 | [3] | NUT (1/4-20-THD) | |
| 5P-0537 C | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 49. | 1B-7904 | [2] | SPACER (6.8X10X9.5-MM THK) | |
| 50. | 6W-0639 CY | [1] | NEUTRALIZER GP-TRANSMISSION | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770749
1V-5927: CONTROL GP-TRANSMISSION
1V-5927 CONTROL GP-TRANSMISSION
S/N 49Z1023-1437; 49Z1439-1439; 49Z1441-1441; 49Z1443-1445; 49Z1449-1450
PART OF 7V-0011 OPERATOR AR
S/N 49Z1023-1437; 49Z1439-1439; 49Z1441-1441; 49Z1443-1445; 49Z1449-1450
PART OF 7V-0011 OPERATOR AR
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3K-1644 | [1] | SCREW (5/16-18X2.75-IN) | |
| 2. | 6K-5177 | [1] | HANDLE-SHIFT | |
| 3. | 1V-6347 | [1] | SHAFT | |
| 4. | 1V-6346 | [1] | COLLAR-INDICATOR | |
| 5. | 8T-5069 C | [1] | SETSCREW-SOCKET (10-24X0.25-IN) | |
| 6. | 6W-5795 C | [1] | LEVER AS | |
| 7. | 2M-2489 | [1] | SEAL-LIP TYPE | |
| 8. | 1V-5326 | [2] | BEARING | |
| 9. | 9K-6605 | [1] | SPACER | |
| 10. | 1V-9809 | [1] | RETAINER | |
| 11. | 5S-7046 | [1] | RING-RETAINING | |
| 12. | 6W-5546 C | [1] | RACK | |
| 13. | 2V-3713 | [1] | STOP | |
| 14. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 15. | 010-2571 | [3] | SETSCREW-SOCKET (1/4-20X0.31-IN) | |
| 16. | 1V-6342 | [1] | GEAR AS | |
| 1V-5326 | [1] | BEARING | ||
| 17. | 4V-3059 | [1] | BELLCRANK | |
| 18. | 7T-2091 | [1] | CABLE AS (SPEED) | |
| 19. | 7T-8996 | [1] | CABLE AS (DIRECTIONAL) | |
| 20. | 5P-0537 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 21. | 7B-2742 | [3] | BOLT (1/4-20X1.25-IN) | |
| 22. | 4V-0031 | [1] | CLAMP | |
| 23. | 1V-6348 | [1] | PIN | |
| 24. | 3K-9042 | [2] | RING-RETAINING | |
| 25. | 9L-2685 | [2] | BALL JOINT AS | |
| 26. | 1B-4201 | [2] | NUT-FULL (1/4-28-THD) | |
| 27. | 010-2570 | [2] | SETSCREW (1/4-20X0.375-IN)(9.53MM .375IN LG) | |
| 28. | 4V-3058 | [1] | PIN | |
| 29. | 5S-9607 | [1] | LOCKNUT | |
| 30. | 6W-5796 C | [1] | ADAPTER | |
| 31. | 5V-8377 | [1] | BRACKET | |
| 32. | 5M-2894 C | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 33. | 8D-5294 C | [1] | RING | |
| 8D-5295 C | [1] | PIN | ||
| 34. | 2V-3215 | [1] | SEAL | |
| 35. | 2V-3222 | [1] | RETAINER | |
| 36. | 2V-3216 | [2] | CLIP | |
| 37. | 9S-1354 C | [1] | NUT (5/8-18-THD) | |
| 38. | 7V-0580 | [1] | BRACKET AS | |
| 39. | 9F-2978 | [3] | NUT-WELD (3/8-16-THD) | |
| 40. | 1V-6341 | [2] | SEAL | |
| 41. | 5P-8247 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 42. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 43. | 1B-4201 C | [2] | NUT-FULL (1/4-28-THD) | |
| 44. | 8B-3768 | [1] | ROD END | |
| 45. | 8T-7320 C | [1] | SEAL (44.92-MM ID) | |
| 46. | 0S-1615 | [1] | BOLT (1/4-20X0.75-IN) | |
| 47. | 5P-9297 | [4] | CLIP (LOOP) | |
| 48. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 49. | 1B-4330 | [3] | NUT (1/4-20-THD) | |
| 5P-0537 C | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 50. | 1B-7904 | [2] | SPACER (6.8X10X9.5-MM THK) | |
| 51. | 6W-0639 CY | [1] | NEUTRALIZER GP-TRANSMISSION | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog 992C :
Truck sale:
45.000
