WORK TOOLS
BUCKET GPWORK TOOLS
BUCKET GP
#SEBP13770900
101-3159: BUCKET GP-ROCK
101-3159 BUCKET GP-ROCK -HIGH LIFT
S/N 49Z1-99999
10.7 CU M (14 CU YD). SPADE. BOLT-ON SEGMENTS
FOR USE WITH HIGH LIFT
S/N 49Z1-99999
10.7 CU M (14 CU YD). SPADE. BOLT-ON SEGMENTS
FOR USE WITH HIGH LIFT
For full view, you need register
#SEBP13770901
106-7788: BUCKET GP-ROCK
106-7788 BUCKET GP-ROCK
S/N 49Z1-99999
10.07 CU M (14 CU YD). MODULOK
FOR USE WITH HIGH & INTERMEDIATE LIFT
S/N 49Z1-99999
10.07 CU M (14 CU YD). MODULOK
FOR USE WITH HIGH & INTERMEDIATE LIFT
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1U-0740 | [2] | PROTECTOR-SIDE BAR | ||
| 8J-2928 | [20] | BOLT-PLOW (1-8X3.75-IN) | ||
| 4J-9208 | [8] | BOLT-PLOW (1-8X3.5-IN) | ||
| 106-1788 Y | [1] | BUCKET AS-ROCK | ||
| 1U-0741 | [9] | COVER | ||
| 1U-0869 | [2] | EDGE-CUTTING | ||
| 9J-9974 | [3] | EDGE-CUTTING | ||
| 9J-9973 | [3] | EDGE-CUTTING | ||
| 2J-3507 | [28] | NUT-FULL (1-8-THD) | ||
| 107-3378 | [18] | PIN | ||
| 1U-0739 | [4] | PIN | ||
| 4T-6541 | [2] | PLATE-WEAR | ||
| 4T-6540 | [3] | PLATE-WEAR | ||
| 6W-0276 | [2] | PLATE-WEAR | ||
| 8E-5559 | [4] | RETAINER AS | ||
| 107-8559 | [18] | RETAINER AS | ||
| 9N-4552 | [9] | TIP-LONG (HEAVY-DUTY) | ||
| 5P-8250 | [28] | WASHER (28X49X5-MM THK) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770902
2Q-7248: BUCKET GP-ROCK
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 135-0794 Y | [1] | BUCKET AS-ROCK | ||
| 123-4392 Y | [1] | EDGE GP-SEGMENT | ||
| 101-3083 Y | [2] | PROTECTOR GP-SIDE BAR | ||
| 4J-9208 | [8] | BOLT-PLOW (1-8X3.5-IN) | ||
| 5P-8136 | [6] | BOLT-PLOW (1-8X4-IN) | ||
| 6Y-0311 | [1] | EDGE-CUTTING | ||
| 6Y-0312 | [1] | EDGE-CUTTING | ||
| 2J-3507 | [14] | NUT-FULL (1-8-THD) | ||
| 6W-0276 | [2] | PLATE-WEAR | ||
| 5P-8250 | [14] | WASHER (28X49X5-MM THK) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770903
2Z-9655: BUCKET GP-ROCK
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2Q-7121 Y | [1] | BUCKET AS-ROCK | ||
| 123-4392 Y | [1] | EDGE GP-SEGMENT | ||
| 101-3083 Y | [2] | PROTECTOR GP-SIDE BAR | ||
| 4J-9208 | [8] | BOLT-PLOW (1-8X3.5-IN) | ||
| 5P-8136 | [6] | BOLT-PLOW (1-8X4-IN) | ||
| 6Y-0311 | [1] | EDGE-CUTTING | ||
| 6Y-0312 | [1] | EDGE-CUTTING | ||
| 2J-3507 | [14] | NUT-FULL (1-8-THD) | ||
| 6W-0276 | [2] | PLATE-WEAR | ||
| 5P-8250 | [14] | WASHER (28X49X5-MM THK) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770904
4E-8015: BUCKET GP-ROCK
4E-8015 BUCKET GP-ROCK
S/N 49Z1-99999
10.7 CU. M (14 CU. YD). MODULOK
CANNOT BE USED WITH HIGH LIFT ARS
S/N 49Z1-99999
10.7 CU. M (14 CU. YD). MODULOK
CANNOT BE USED WITH HIGH LIFT ARS
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0740 | [2] | PROTECTOR-SIDE BAR | |
| 2. | 1U-0739 | [4] | PIN | |
| 3. | 5P-8250 | [28] | WASHER (28X49X5-MM THK) | |
| 4. | 2J-3507 | [28] | NUT-FULL (1-8-THD) | |
| 5. | 9U-3013 Y | [1] | BUCKET AS-ROCK | |
| 6. | 9J-9974 | [3] | EDGE-CUTTING | |
| 7. | 1U-0869 | [2] | EDGE-CUTTING | |
| 8. | 1U-0741 | [9] | COVER | |
| 9. | 9N-4552 | [9] | TIP-LONG (HEAVY-DUTY) | |
| 10. | 6W-0276 | [2] | PLATE-WEAR | |
| 11. | 4T-6540 | [3] | PLATE-WEAR | |
| 12. | 4T-6541 | [2] | PLATE-WEAR | |
| 13. | 9J-9973 | [3] | EDGE-CUTTING | |
| 14. | 8E-5559 | [4] | RETAINER AS | |
| 15. | 107-3378 | [18] | PIN | |
| 16. | 4J-9208 | [8] | BOLT-PLOW (1-8X3.5-IN) | |
| 17. | 8J-2928 | [20] | BOLT-PLOW (1-8X3.75-IN) | |
| 18. | 107-8559 | [18] | RETAINER AS | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770905
4E-8016: BUCKET GP-ROCK
4E-8016 BUCKET GP-ROCK
S/N 49Z1-99999
10.7 CU M (14 CU YD). SPADE, DOUBLE STRAP TEETH & BOLT-ON SEGMENTS
CANNOT BE USED WITH HIGH LIFT
S/N 49Z1-99999
10.7 CU M (14 CU YD). SPADE, DOUBLE STRAP TEETH & BOLT-ON SEGMENTS
CANNOT BE USED WITH HIGH LIFT
For full view, you need register
#SEBP13770906
4E-8621: BUCKET GP-ROCK
4E-8621 BUCKET GP-ROCK
S/N 49Z1-99999
9.6 CU M (12.5 CU YD). SPADE, BOLT ON SEGMENTS
FOR USE WITH HIGH LIFT
S/N 49Z1-99999
9.6 CU M (12.5 CU YD). SPADE, BOLT ON SEGMENTS
FOR USE WITH HIGH LIFT
For full view, you need register
#SEBP13770907
5V-5386: BUCKET GP-ROCK
5V-5386 BUCKET GP-ROCK
S/N 49Z1-99999
10 CU M (13 CU YD) HEAPED CAPACITY-4775 MM (188 IN) WIDE. SPADE NOSE MODULOK
CANNOT BE USED WITH MACHINES EQUIPPED WITH EXTENDED DUMP HEIGHT
S/N 49Z1-99999
10 CU M (13 CU YD) HEAPED CAPACITY-4775 MM (188 IN) WIDE. SPADE NOSE MODULOK
CANNOT BE USED WITH MACHINES EQUIPPED WITH EXTENDED DUMP HEIGHT
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0740 | [2] | PROTECTOR-SIDE BAR | |
| 2. | 1U-0739 | [4] | PIN | |
| 3. | 3K-5234 | [28] | WASHER-HARD (28X49X6-MM THK) | |
| 4. | 2J-3507 | [28] | NUT-FULL (1-8-THD) | |
| 5. | 5V-5387 Y | [1] | BUCKET AS-ROCK | |
| 6. | 9J-9974 | [3] | EDGE-CUTTING | |
| 7. | 1U-0869 | [2] | EDGE-CUTTING | |
| 8. | 1U-0741 | [9] | COVER | |
| 9. | 4T-1553 | [9] | TIP-ABRASION | |
| -OR- | ||||
| 9J-4551 A | [9] | TIP-SHORT | ||
| -OR- | ||||
| 9J-4552 A | [9] | TIP-LONG | ||
| -OR- | ||||
| 9J-4559 A | [9] | TIP-PENETRATION | ||
| 10. | 7V-6835 | [2] | PLATE-WEAR | |
| 11. | 8J-9854 | [3] | PLATE-WEAR (34.92MM 1.375IN THK) | |
| -OR- | ||||
| 8J-4974 A | [3] | PLATE-WEAR (41.28MM 1.625IN THK) | ||
| 12. | 9J-9960 | [2] | PLATE-WEAR (34.92MM 1.375IN THK) | |
| -OR- | ||||
| 9J-6836 A | [2] | PLATE-WEAR (41.28MM 1.625IN THK) | ||
| 13. | 9J-9973 | [3] | EDGE-CUTTING | |
| 14. | 3G-9559 | [22] | RETAINER | |
| 15. | 1U-1558 | [18] | PIN | |
| 16. | 4J-9208 | [8] | BOLT-PLOW (1-8X3.5-IN) | |
| 17. | 8J-2928 | [20] | BOLT-PLOW (1-8X3.75-IN) | |
| A | NOT PART OF THIS GROUP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13770908
5V-5602: BUCKET GP-ROCK
5V-5602 BUCKET GP-ROCK
S/N 49Z1-99999
10 CU M (13 CU YD) HEAPED CAPACITY-4750 MM (187 IN) WIDE. SPADE NOSE
CANNOT BE USED WITH MACHINES EQUIPPED WITH EXTENDED DUMP HEIGHT
S/N 49Z1-99999
10 CU M (13 CU YD) HEAPED CAPACITY-4750 MM (187 IN) WIDE. SPADE NOSE
CANNOT BE USED WITH MACHINES EQUIPPED WITH EXTENDED DUMP HEIGHT
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5V-5603 | [1] | BUCKET AS-LOADER | |
| 2. | 8P-9770 C | [2] | PLATE | |
| 3. | 3V-3214 | [2] | BAR | |
| 4. | 8K-6489 | [1] | CORNER (RH) | |
| 8K-6490 | [1] | CORNER (LH) | ||
| 5. | 5V-5578 | [1] | EDGE-CUTTING | |
| 6. | 5V-2571 | [1] | HINGE AS (OUTER) | |
| 7. | 5V-2730 | [1] | HINGE AS (INNER) | |
| 8. | 3V-6704 | [1] | HINGE AS (CENTER) | |
| 9. | 3V-6705 | [1] | HINGE AS (CENTER) | |
| 10. | 5V-2573 | [1] | HINGE AS (INNER) | |
| 11. | 5V-2554 | [1] | HINGE AS (OUTER) | |
| 12. | 5V-2553 | [1] | PLATE | |
| 13. | 3V-3235 | [1] | GUARD AS | |
| 14. | 3V-3217 | [8] | GRILL | |
| 15. | 7V-6835 C | [2] | PLATE-WEAR | |
| 16. | 2J-3507 | [8] | NUT-FULL (1-8-THD) | |
| 3K-5234 | [8] | WASHER-HARD (28X49X6-MM THK) | ||
| 17. | 4J-9208 | [8] | BOLT-PLOW (1-8X3.5-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP13770909
8V-7565: BUCKET GP-ROCK
8V-7565 BUCKET GP-ROCK
S/N 49Z1-99999
10 M3 (13 YD 3), 4750 MM(187 IN) WIDE. SPADE NOSE
CANNOT BE USED WITH MACHINES EQUIPPED WITH EXTENDED DUMP HEIGHT
S/N 49Z1-99999
10 M3 (13 YD 3), 4750 MM(187 IN) WIDE. SPADE NOSE
CANNOT BE USED WITH MACHINES EQUIPPED WITH EXTENDED DUMP HEIGHT
For full view, you need register
Parts for your 992C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5V-5601 | [1] | BUCKET AS-LOADER | |
| 2. | 5V-5579 | [1] | EDGE AS-CUTTING | |
| 3. | 3G-9494 | [2] | ADAPTER-TIP (2-STRAP, CENTER)(CENTER) | |
| 4. | 5V-5410 | [1] | ADAPTER-TIP (OUTER) | |
| 5V-5409 | [1] | ADAPTER-TIP (OUTER) | ||
| 5. | 3G-9495 | [2] | ADAPTER-TIP (2-STRAP, RH)(INNER) | |
| 3G-9496 | [2] | ADAPTER-TIP (2-STRAP, LH)(INNER) | ||
| 6. | 8P-9770 | [2] | PLATE | |
| 7. | 5V-5393 | [2] | BAR | |
| 8. | 5V-5402 | [2] | CORNER | |
| 9. | 3V-3235 | [1] | GUARD AS | |
| 10. | 3V-3217 | [8] | GRILL | |
| 11. | 5V-2571 | [1] | HINGE AS (OUTER) | |
| 12. | 5V-2730 | [1] | HINGE AS (INNER) | |
| 13. | 3V-6704 | [1] | HINGE AS (CENTER) | |
| 14. | 3V-6705 | [1] | HINGE AS (CENTER) | |
| 15. | 5V-2573 | [1] | HINGE AS (INNER) | |
| 16. | 5V-2554 | [1] | HINGE AS (OUTER) | |
| 17. | 5V-2553 | [2] | PLATE | |
| 18. | 4J-9208 | [8] | BOLT-PLOW (1-8X3.5-IN) | |
| 2J-3507 | [8] | NUT-FULL (1-8-THD) | ||
| 3K-5234 | [8] | WASHER-HARD (28X49X6-MM THK) | ||
| 19. | 7V-6835 | [2] | PLATE-WEAR |
Information:
Caterpillar Parts SIS Catalog 992C :
Truck sale:
45.000
