AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9N3600 CYLINDER HEAD GROUP-PART 2 OF 2*R S/N 30A210-514 3208 GEN SET ENGINE


BASIC ENGINE
CYLINDER HEAD GP

GEN SET ENGINE 3208 GEN SET ENGINE 30A
 3208 GENERATOR SET ENGINE 30A00210-05099 SEBP1385 3208 30A   (1982)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
9N-6486 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-6620 CYLINDER HEAD GP
 

#SEBP13850050
 

9N-3600: CYLINDER HEAD GP

9N3600 CYLINDER HEAD GROUP-PART 2 OF 2*R
S/N 30A210-514
c229509 SEBP1385
9N3600 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [1] BOLT 4.44CM(1.75IN)LONG  
    (LOCATION "C"-LEFT
    HEAD)
  9L-9166 [1] STUDBOLT 9.14CM(3.6IN)LONG  
    (RIGHT HEAD)
2. 9N-5565 [16] WASHER-SPRING SEAT  
3. 9N-5496 [16] SPRING-VALVE OUTER  
4. 9N-5495 [16] SPRING-VALVE INNER  
5. 2A-4429 [32] LOCK-RETAINER  
6. 6N-8505 [2] GASKET-CYLINDER HEAD  
7. 9N-5125 [8] VALVE-EXHAUST  
8. 9L-7682 [8] VALVE-INLET  
9. 9N-5497 [16] RETAINER-VALVE SPRING  
 

#SEBP13850051
 

9N-3600: CYLINDER HEAD GP

9N3600 CYLINDER HEAD GROUP*R
S/N 30A515-2995
1W2282-PAGE 18
c344882 SEBP1385
9N3600 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2282 YR [2] CYLINDER HEAD GP  
2. 9L-7657 [2] PLUG-CUP  
3. 6F-5282 [8] BOLT (LOCATION A)  
4. 7W-2059 [2] GASKET-CYLINDER HEAD  
5. 0S-1571 [1] BOLT 4.44CM(1.75IN)LONG  
6. 5B-9603 [6] BOLT (LOCATION D)  
7. 0L-1329 [8] BOLT (LOCATION E)  
8. 2B-2006 [12] BOLT (LOCATION F)  
9. 2B-0947 [8] BOLT (LOCATION G)  
10. 5M-6213 [4] PLUG  
11. 3H-7654 [36] WASHER  
12. 2B-0858 [2] PLUG-PIPE  
13. 4L-2768 [1] PLUG-PIPE  
14. 9L-9166 [1] STUDBOLT 9.14CM(3.6IN)LONG  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13850052
 

9N-3600: CYLINDER HEAD GP

9N3600 CYLINDER HEAD GP*R
S/N 30A2996-UP
1W2282-PAGE 18A.01
c613275 SEBP1385
9N3600 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2282 RY [2] CYLINDER HEAD GP  
2. 9L-7657 [2] PLUG-CUP  
3. 6F-5282 [8] BOLT (1/2-13X5.25IN)(LOCATION A)  
4. 7C-1599 C [2] GASKET-CYLINDER HEAD  
5. 0S-1571 [1] BOLT (44.45MM(1.75IN)LG)  
    (LEFT HEAD)
6. 5B-9603 [6] BOLT (3/8-16X5IN) (LOCATION D)  
7. 0L-1329 [8] BOLT (1/2-13X3IN) (LOCATION E)  
8. 2B-2006 [12] BOLT (((1/2-13X4.75IN) (LOCATION  
9. 2B-0947 [8] BOLT (((1/2-13X2.25IN) (LOCATION  
10. 8T-6765 [2] PLUG-PIPE (LEFT HEAD)  
11. 3H-7654 [36] WASHER  
12. 4L-2768 [1] PLUG-PIPE (LEFT HEAD)  
13. 8T-6765 B [1] PLUG-PIPE (RIGHT HEAD)  
14. 2B-0858 [2] PLUG-PIPE  
15. 9L-9166 [1] STUDBOLT (91.44MM(3.6IN)LG)  
    (RIGHT HEAD)
16. 8T-6765 [1] PLUG-PIPE (RIGHT HEAD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13850053
 

9N-6620: CYLINDER HEAD GP

9N6620 CYLINDER HEAD GROUP*R
S/N 30A210-1185
PART OF 9N6486 CYLINDER HEAD
c237337 SEBP1385
9N6620 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 9N-5497 [8] RETAINER-VALVE SPRING  
3. 9N-5496 [8] SPRING-VALVE OUTER  
4. 1W-9897 [8] WASHER-SPRING SEAT  
5. 9L-7683 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET  
6. 9N-5819 [1] CYLINDER HEAD AS  
7. 9N-2837 [4] INSERT-SEAT EXHAUST  
  2N-8943 [4] INSERT-INTAKE  
8. 8M-5860 [4] PLUG-CUP  
9. 9L-7657 [1] PLUG-CUP  
10. 5M-6214 [1] PLUG-PIPE  
11. 0L-1329 [3] BOLT  
12. 5M-6213 [1] PLUG  
13. 9N-5495 [8] SPRING-VALVE INNER  
 

#SEBP13850054
 

9N-6620: CYLINDER HEAD GP

9N6620 CYLINDER HEAD GP*R
S/N 30A1186-1968
PART OF 9N6486 CYLINDER HEAD
c328100 SEBP1385
9N6620 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 9N-5497 [8] RETAINER-VALVE SPRING  
3. 9N-5496 [8] SPRING-VALVE OUTER  
4. 1W-9897 [8] WASHER-SPRING SEAT  
5. 9L-7683 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET  
6. 4W-4031 CR [1] CYLINDER HEAD AS-SERVICE  
7. 9N-2837 [4] INSERT-SEAT EXHAUST  
  2N-8943 [4] INSERT-INTAKE  
8. 8M-5860 [4] PLUG-CUP  
9. 9L-7657 [1] PLUG-CUP  
10. 2B-0858 [1] PLUG-PIPE  
11. 6H-1717 [2] BOLT  
  5P-8245 [2] WASHER  
12. 5M-6213 [1] PLUG  
13. 9N-5495 [8] SPRING-VALVE INNER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13850055
 

9N-6620: CYLINDER HEAD GP

9N6620 CYLINDER HEAD GP*R
S/N 30A1969-UP-TYPE 1
7C2295-PAGE 17D
PART OF 9N6486 CYLINDER HEAD
c497768 SEBP1385
9N6620 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 9N-5497 [8] RETAINER-VALVE SPRING  
3. 9N-5496 [8] SPRING-VALVE OUTER  
4. 1W-9897 [8] WASHER-SPRING SEAT  
5. 9L-7683 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET (INTAKE)  
6. 7C-2295 Y [1] CYLINDER HEAD AS  
7. 9N-5495 [8] SPRING-VALVE INNER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13850056
 

9N-6620: CYLINDER HEAD GP

9N6620 CYLINDER HEAD GP*R
S/N 30A1969-UP-TYPE 2
7C2296-PAGE 18E
PART OF 9N6486 CYLINDER HEAD
c517191 SEBP1385
9N6620 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 9N-5497 [8] RETAINER-VALVE SPRING  
3. 9N-5496 [8] SPRING-VALVE OUTER  
4. 1W-9897 [8] WASHER-SPRING SEAT  
5. 9L-7683 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET (INTAKE)  
6. 7C-2296 Y [1] CYLINDER HEAD AS  
7. 9N-5495 [8] SPRING-VALVE INNER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13850057
 

7C-2295: CYLINDER HEAD AS

7C2295 CYLINDER HEAD AS
PART OF 9N6620 CYLINDER HEAD
REPLACEMENT ORDER 7C2320-PAGE 18A.02 OR 7C3807-PAGE 18D
c625398 SEBP1385
7C2295 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] HEAD  
2. 8M-5860 [4] PLUG-CUP  
3. 9N-2837 [4] INSERT  
  Z   NOT SERVICED SEPARATELY
 

#SEBP13850058
 

1W-2282: CYLINDER HEAD GP

1W2282 CYLINDER HEAD GROUP*R
S/N 30A515-30A1185
PART OF 9N3600 CYLINDER HEAD
c315859 SEBP1385
1W2282 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5496 [8] SPRING-VALVE OUTER  
2. 9N-5495 [8] SPRING-VALVE INNER  
3. 9N-5497 [8] RETAINER-VALVE SPRING  
4. 2A-4429 [16] LOCK-RETAINER  
5. 2W-7167 [1] CYLINDER HEAD AS  
6. 8M-5860 [4] PLUG-CUP  
7. 9N-2837 [4] INSERT-SEAT EXHAUST  
  2N-8943 [4] INSERT-INTAKE  
8. 9N-5125 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET  
9. 1W-9897 [8] WASHER-SPRING SEAT  
 

#SEBP13850059
 

1W-2282: CYLINDER HEAD GP

1W2282 CYLINDER HEAD GP*R
S/N 30A1186-2017
PART OF 9N3600 CYLINDER HEAD
c327942 SEBP1385
1W2282 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5496 [8] SPRING-VALVE OUTER  
2. 9N-5495 [8] SPRING-VALVE INNER  
3. 9N-5497 [8] RETAINER-VALVE SPRING  
4. 2A-4429 [16] LOCK-RETAINER  
5. 1W-9897 [8] WASHER-SPRING SEAT  
6. 9N-5125 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET (INTAKE)  
7. 4W-4031 R [1] CYLINDER HEAD AS-SERVICE  
8. 9N-2837 [4] INSERT-SEAT EXHAUST  
  2N-8943 [4] INSERT-INTAKE  
9. 8M-5860 [4] PLUG-CUP  
10. 9L-7657 [1] PLUG-CUP  
11. 2B-0858 [1] PLUG-PIPE  
12. 6H-1717 [2] BOLT  
  5P-8245 [1] WASHER  
13. 5M-6213 [1] PLUG  
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Engine News
New 6V116 Water Sleeve Removal Tool Is Available
1979/05/23
New Rocker Arm Assemblies Used
1982/09/22
Resurfaced Cylinder Blocks And Heads
1982/11/10
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Improved Cylinder Head Gasket
1983/02/16
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power
1983/10/26
Correct Installation Of New Valve Springs
1983/11/30
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads
1984/01/18
Improved Cylinder Head Gasket
1984/06/20
New Relief Valve Guide Used In Oil Pump
1984/07/11
Identification Of Camshaft Groups And Valve Mechanism Groups
1984/12/12
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure
1985/04/01
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines
1985/08/01
Head Gasket Replacement Procedure
1985/08/01
Improved Cylinder Head Gasket
1986/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Plastic Water Sleeve Used
1987/06/01
Check Plastic Water Sleeve If Engine Experiences Severe Overheating
1987/11/01
New Head Gasket Used
1989/05/01
New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters)
1989/12/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Clarify Usage Of Parts Service Cylinder Head Gaskets
1993/12/01
New Lifter Assembly Is Available For Turbocharged Engines {1209}
1996/09/23
New Chrome-Plated Stem On Exhaust Valve Increases Valve And Valve Guide Wear Life {1105,1100}
1997/06/23
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
Installation of Head Gasket (With New Torque Procedure){1100}
Installation of Head Gasket (With New Torque Procedure){1100}
Adaptability of 7C1599 Cylinder Head Gasket{1100}
Adaptability of 7C1599 Cylinder Head Gasket{1100}
Installation Of Remanufactured Cylinder Head Groups{1101}
Installation Of Remanufactured Cylinder Head Groups{1101}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101}
Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Groups (Turbocharged){1101}
Installation Of Replacement Cylinder Head Groups (Turbocharged){1101}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Valve Rocker Arms And Lifters
3208 GENERATOR SET ENGINES
Valves
3208 GENERATOR SET ENGINES
Valve Seats And Inserts
3208 GENERATOR SET ENGINES
Cylinder Head
3208 GENERATOR SET ENGINES
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Rocker Shaft Assemblies And Push Rods
3208 GENERATOR SET ENGINE
Rocker Shaft Assemblies
3208 GENERATOR SET ENGINE
Valve Lifters
3208 GENERATOR SET ENGINE
Cylinder Head Assemblies
3208 GENERATOR SET ENGINE
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Resurfaced Cylinder BlocksAnd Heads{1201,1101,1000}
1982/10/25
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Improved Cylinder Head Gasket{1101,1201}
1983/01/24
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Valve Spring Retainers Now Have Thicker Flanges{1108}
1983/04/25
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Correct Installation Of New Valve Springs{1108}
1983/11/21
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads{1104}
1983/12/19
Improved Cylinder Head Gasket{1101,1201}
1984/05/21
New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/06/25
FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01
Head Gasket Replacement Procedure{0350,1100}
1985/08/05
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines{1100,1108}
1985/08/05
Improved Cylinder Head Gasket{1101,1201}
1986/03/24
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
New Plastic Water Sleeve Used{1380}
1987/05/18
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Head Gasket Used {1124}
1989/05/15
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Compression Ratio Increased On Remanufactured OR1094 & OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
Clarify Usage Of Parts Service Cylinder Head Gaskets{1124}
1994/01/10

Caterpillar Parts SIS Catalog 3208 :

CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-6486 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-6486 CYLINDER HEAD GP
PISTON & ROD GP
7W-9049 PISTON & ROD GP
PISTON GP
2W-4841 PISTON GP
PISTON & ROD GP
9N-6435 PISTON & ROD GP
PISTON & ROD GP
9N-6435 PISTON & ROD GP
CAMSHAFT GP
9N-6609 CAMSHAFT GP
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-6620 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-6620 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-6620 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-6620 CYLINDER HEAD GP
CYLINDER HEAD AS
7C-2295 CYLINDER HEAD AS
CYLINDER HEAD GP
1W-2282 CYLINDER HEAD GP

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.