AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GPAIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP#SEBP13850170
4W-1133: TURBOCHARGER GP
4W1133 TURBOCHARGER GP*R
S/N 30A675-1581
4W1131-PAGE 46A
PART OF 2W2589 TURBOCHARGER
S/N 30A675-1581
4W1131-PAGE 46A
PART OF 2W2589 TURBOCHARGER
Parts for your 3208 GEN SET ENGINE:
CATERPILLAR SIS#SEBP13850171
2W-2589: TURBOCHARGER GP
Parts for your 3208 GEN SET ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4W-1133 CRY | [1] | TURBOCHARGER GP | |
2. | 5P-7530 | [1] | SEAL-O-RING (LARGE) | |
3. | 1N-7284 C | [2] | BOLT-12 POINT HEAD | |
4. | 9N-5305 | [1] | COVER | |
5. | 3B-1915 | [2] | BOLT | |
6. | 9N-5307 | [1] | GASKET | |
7. | 8M-5127 | [1] | SEAL-O-RING (SMALL) | |
8. | 5M-2894 C | [2] | WASHER | |
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMFG PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP13850172
7W-2874: TURBOCHARGER GP
Parts for your 3208 GEN SET ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2W-3139 | [1] | HOUSING-COMPRESSOR | |
2. | 6V-0413 | [8] | SCREW-MACHINE | |
3. | 1W-8917 | [4] | CLAMP | |
4. | 7W-2878 RY | [1] | CARTRIDGE GP-TURBOCHARGER | |
5. | 1W-9311 | [1] | CLAMP AS-TURBINE | |
6. | 1W-9312 | [1] | SEAL-O-RING | |
7. | 2W-3140 | [1] | HOUSING-TURBINE | |
8. | 1W-4795 | [1] | NAMEPLATE | |
2F-0808 | [2] | SCREW | ||
R | REMFG PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP13850173
2W-2589: TURBOCHARGER GP
Parts for your 3208 GEN SET ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7W-2874 CRY | [1] | TURBOCHARGER GP | |
2. | 5P-7530 | [1] | SEAL-O-RING (LARGE) | |
3. | 1N-7284 | [2] | BOLT-12 POINT HEAD | |
4. | 9N-5305 | [1] | COVER | |
5. | 3B-1915 | [2] | BOLT | |
6. | 9N-5307 | [1] | GASKET | |
7. | 8M-5127 | [1] | SEAL-O-RING (SMALL) | |
8. | 5M-2894 | [2] | WASHER | |
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMFG PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP13850174
7W-9132: TURBOCHARGER GP
Parts for your 3208 GEN SET ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2W-3139 | [1] | HOUSING-COMPRESSOR | |
2. | 6V-0413 | [8] | SCREW-MACHINE | |
3. | 1W-8917 | [4] | CLAMP | |
4. | 7W-2878 RY | [1] | CARTRIDGE GP-TURBOCHARGER | |
5. | 1W-9311 | [1] | CLAMP AS-TURBINE | |
6. | 1W-9312 | [1] | SEAL-O-RING | |
7. | 7W-9133 | [1] | HOUSING-TURBINE | |
8. | 1W-4795 | [1] | NAMEPLATE | |
2F-0808 | [2] | SCREW | ||
R | REMFG PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP13850175
7W-9197: TURBOCHARGER GP
7W9197 TURBOCHARGER GP
7W9132-PAGE 45B.01
7W9132-PAGE 45B.01
Parts for your 3208 GEN SET ENGINE:
CATERPILLAR SIS#SEBP13850176
7W-2876: TURBOCHARGER GP
Parts for your 3208 GEN SET ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2W-3139 | [1] | HOUSING-COMPRESSOR | |
2. | 6V-0413 | [8] | SCREW-MACHINE | |
3. | 1W-8917 | [1] | CLAMP | |
4. | 7W-2878 RY | [1] | CARTRIDGE GP-TURBOCHARGER | |
5. | 1W-9311 | [1] | CLAMP AS-TURBINE | |
6. | 1W-9312 | [1] | SEAL-O-RING | |
7. | 2W-3477 | [1] | HOUSING-TURBINE | |
8. | 1W-4795 | [1] | NAMEPLATE | |
2F-0808 | [2] | SCREW | ||
R | REMFG PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP13850177
1W-6718: TURBOCHARGER GP
Parts for your 3208 GEN SET ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7W-2876 CRY | [1] | TURBOCHARGER GP | |
2. | 5P-7530 | [1] | SEAL-O-RING (LARGE) | |
3. | 1N-7284 | [2] | BOLT-12 POINT HEAD | |
4. | 9N-5305 | [1] | COVER | |
5. | 3B-1915 | [2] | BOLT | |
6. | 9N-5307 | [1] | GASKET | |
7. | 8M-5127 | [1] | SEAL-O-RING (SMALL) | |
8. | 5M-2894 | [2] | WASHER | |
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMFG PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP13850178
7W-2878: CARTRIDGE GP-TURBOCHARGER
7W2878 TURBOCHARGER CARTRIDGE GP*R
S/N 30A1582-UP
PART OF 7W2874, 7W9132 & 7W2876 TURBOCHARGERS
S/N 30A1582-UP
PART OF 7W2874, 7W9132 & 7W2876 TURBOCHARGERS
Parts for your 3208 GEN SET ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2W-3141 R | [1] | WHEEL & SHAFT AS | |
2. | 7N-3759 J | [1] | RING-PISTON | |
3. | 7C-7058 | [1] | SHROUD-HEAT | |
4. | 1W-4459 J | [3] | RING-RETAINING | |
5. | 105-1973 | [1] | PLATE-COMPRESSOR BACKING | |
6. | 7W-2880 R | [1] | HOUSING AS-BEARING | |
7. | 9F-2247 | [1] | PLUG | |
8. | 4P-3817 J | [1] | BEARING-THRUST | |
9. | 105-1974 | [1] | COLLAR-THRUST | |
10. | 1W-4467 J | [1] | RING-SEAL | |
11. | 9M-8919 J | [1] | RING-SEAL | |
12. | 6V-5698 M | [3] | SCREW-BUTTON HEAD | |
13. | 3S-4484 J | [1] | LOCKNUT-TURBOCHARGER | |
14. | 2W-3142 | [1] | WHEEL-COMPRESSOR | |
15. | 6V-8214 M | [4] | BOLT | |
16. | ZL | [2] | BEARING | |
17. | ZL | [1] | WASHER | |
THE FOLLOWING REPAIR | ||||
KITS ARE AVAILABLE: | ||||
2W-5972 | [1] | KIT-BEARING (INCLDS. PARTS MARKED L) | ||
7W-4873 C | [1] | KIT-CARTRIDGE | ||
(INCLDS. PARTS MARKED J) | ||||
C | CHANGE FROM PREVIOUS TYPE | |||
M | METRIC PART | |||
R | REMFG PART MAY BE AVAILABLE | |||
Z | NOT SERVICED SEPARATELY |
#SEBP13850179
2W-3138: CARTRIDGE GP-TURBOCHARGER
2W3138 TURBOCHARGER CARTRIDGE GP*R
S/N 30A210-674
PART OF 2W2937 TURBOCHARGER
S/N 30A210-674
PART OF 2W2937 TURBOCHARGER
Parts for your 3208 GEN SET ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2W-3142 | [1] | WHEEL-COMPRESSOR | |
2. | 9M-8919 | [2] | RING-SEAL | |
3. | 3C-3664 M | [4] | BOLT | |
4. | 1W-4466 | [1] | BACKPLATE AS | |
5. | 1W-4467 | [1] | RING-SEAL | |
6. | 6V-5698 M | [3] | SCREW-BUTTON HEAD | |
7. | 1W-4457 | [1] | HOUSING-BEARING | |
8. | 1W-4458 | [1] | SHROUD-HEAT | |
9. | 2W-3141 R | [1] | SHAFT & WHEEL AS | |
10. | 7N-3759 | [1] | RING-PISTON | |
11. | 1W-4459 | [3] | RING-RETAINING | |
12. | 1W-4462 | [1] | BEARING-THRUST | |
13. | 1W-4463 | [1] | COLLAR-THRUST | |
14. | 1W-4464 | [1] | SPACER-THRUST | |
15. | 3S-4484 | [1] | LOCKNUT-TURBOCHARGER | |
THE FOLLOWING REPAIR | ||||
KIT IS AVAILABLE: | ||||
2W-5972 C | [1] | KIT-BEARING | ||
(INCL BEARING & WASHER) | ||||
C | CHANGE FROM PREVIOUS TYPE | |||
M | METRIC PART | |||
R | REMFG PART MAY BE AVAILABLE |
Information:
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
Engine News
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
1977/03/15
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
2004/04/01
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Water Pump Reconditioning Using The 9N3139 Rebuild Kit And 5P7361 Tool Group{1361}
Water Pump Reconditioning Using The 9N3139 Rebuild Kit And 5P7361 Tool Group{1361}
Water Pump Reconditioning Using The 9N3139 Rebuild Kit And 5P7361 Tool Group{1361}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
Disassembly and Assembly
Service Magazine
Important Differences In Engine Arrangements On 3208 Engines Equipped With Turbochargers{1000}
1984/11/26
1984/11/26
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
1986/02/03
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
1977/02/28
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
1979/06/25
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
1979/09/03
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Caterpillar Parts SIS Catalog 3208 :
Truck sale:
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -