AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W6738 GOVERNOR & FUEL INJECTION PUMP GP-PART 3 OF 5 PART OF 7W9222 GOVERNOR & FUEL INJECTION PUMP 3208


FUEL SYSTEM
GOVERNOR GP

GEN SET ENGINE 3208 GEN SET ENGINE 30A
 3208 GENERATOR SET ENGINE 30A00210-05099 SEBP1385 3208 30A   (1982)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
4W-6738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-6738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-6738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-6738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-6738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1W-7363 PUMP GP-GOV & FUEL INJ
 

#SEBP13850230
 

4W-6738: PUMP GP-GOV & FUEL INJ

4W6738 GOVERNOR & FUEL INJECTION PUMP GP-PART 3 OF 5
PART OF 7W9222 GOVERNOR & FUEL INJECTION PUMP
c319222 SEBP1385
4W6738 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1615 [7] BOLT  
2. 3J-7354 [1] SEAL-O-RING  
3. 9S-4182 [1] PLUG  
4. 8H-3127 [2] BOLT  
5. 9S-9332 [1] FITTING-ELBOW  
6. 6N-1729 [1] COVER-PUMP HOUSING  
7. 6D-3031 [4] SCREW-SOCKET HEAD  
8. 4N-0941 [1] LEVER-LIMITER  
9. 4N-0505 [1] GASKET-HOUSING  
10. 4N-0935 [1] HOUSING AS (SHUT-OFF)  
  4N-3713 [1] SEAL-LIP TYPE  
11. 4N-0595 [1] GASKET-TOP COVER  
12. 9N-5861 [1] HOUSING AS-PUMP  
  9S-4180 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
13. 9N-5821 [2] DEFLECTOR-PULSE  
14. 4N-1826 [2] DOWEL  
15. 2D-6392 [2] SEAL-O-RING  
16. 4N-2333 [1] PIN-SPRING  
17. 8N-0984 [8] PIN-SPRING  
18. 4N-5481 [1] STUD  
19. 4N-0940 [1] LEVER-SHUT-OFF  
20. 4N-0937 [1] SHAFT-LEVER  
21. 1P-4001 [1] FITTING  
22. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
23. 4N-0532 [1] GASKET-COVER  
24. 4N-0531 [1] COVER-IDLE SCREW  
25. 6L-1756 [2] BOLT  
26. 4N-0938 [1] SHAFT-LEVER  
 

#SEBP13850231
 

4W-6738: PUMP GP-GOV & FUEL INJ

4W6738 GOVERNOR & FUEL INJECTION PUMP GP-PART 4 OF 5
PART OF 7W9222 GOVERNOR & FUEL INJECTION PUMP
c319223 SEBP1385
4W6738 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1359 [1] FLANGE-INLET  
2. 2M-5471 [2] BOLT  
3. 4N-3088 [1] GASKET-INLET  
4. 6N-1716 [1] VALVE AS  
5. 3J-7354 [1] SEAL-O-RING  
6. 9F-6641 [4] BOLT  
7. 4N-2954 [1] SLEEVE-CAMSHAFT  
8. 4N-1132 [1] BODY AS-TRANSFER PUMP  
9. 8S-6814 [1] PIN  
10. 4N-1584 [1] SEAL-LIP TYPE  
11. 4N-0636 [1] SEAL-LIP TYPE  
12. 8H-9804 [1] SHAFT-PUMP IDLER  
13. 4N-0429 [1] GEAR-PUMP (15 TEETH)  
14. 4N-0406 [1] GEAR-PUMP (10 TEETH)  
15. 5M-6509 [1] SEAL-O-RING  
16. 4N-1767 [1] VALVE-BYPASS  
17. 4N-0605 [1] SPRING  
18. 4N-0975 [1] GASKET-CHECK VALVE  
19. 7N-1364 [1] FLANGE AS-CHECK VALVE  
20. 1P-2298 [1] VALVE AS  
 

#SEBP13850232
 

4W-6738: PUMP GP-GOV & FUEL INJ

4W6738 GOVERNOR & FUEL INJECTION PUMP GP-PART 5 OF 5
PART OF 7W9222 GOVERNOR & FUEL INJECTION PUMP
c319224 SEBP1385
4W6738 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4276 [1] SEAT-SPRING  
2. 4N-6408 [1] PISTON AS  
3. 4N-6406 [1] RING-SPACER  
4. 4N-6404 [1] RING-RETAINING  
5. 4N-6407 [1] SPOOL-DASHPOT  
6. 6N-2517 [1] SPRING-DASHPOT  
7. 2W-8623 [1] SEAT-SPRING  
8. 4N-0434 [1] RISER-GOVERNOR  
9. 4N-2927 [2] RACE-BEARING THRUST  
  7M-7219 [1] BEARING-THRUST  
10. 4N-2953 [1] RING-LOCK  
11. 4N-3779 [1] KEY-CAMSHAFT  
12. 4W-6737 [1] CAMSHAFT-FUEL PUMP  
13. 8N-2663 [1] CARRIER-WEIGHT  
14. 8N-2662 [3] BOLT-SOCKET HEAD  
15. 4N-1723 [1] SHIELD-CARRIER  
16. 4N-0425 [3] WEIGHT-GOVERNOR  
17. 4N-0511 [3] DOWEL  
18. 4N-5482 [1] SHAFT-WEIGHT CARRIAGE  
19. 4N-9019 [1] DOWEL  
20. 9N-5822 [1] WASHER-THRUST  
 

#SEBP13850233
 

1W-7363: PUMP GP-GOV & FUEL INJ

1W7363 GOVERNOR AND FUEL INJECTION PUMP GP
S/N 30A210-1175
9N5778-PAGE 53
PART OF 1W7362 GOVERNOR AND FUEL INJECTION PUMP
c235370 SEBP1385
1W7363 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6804 [1] SPRING-GOVERNOR  
2. 4N-0508 [1] GASKET-COVER  
3. 4N-0527 [1] SPRING  
4. 2M-5471 [2] BOLT  
5. 9N-5778 Y [1] GOV & FUEL INJ PUMP GP  
6. 4N-1591 [1] COVER AS-SPRING  
  6N-0411 [1] COVER-TORQUE SPRING  
7. 6N-0412 [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER 1.52MM(.06IN)THK  
  8F-1326 [1] WASHER .813MM(.032IN)THK  
8. 2P-3200 [1] BOLT-WASHER HEAD  
  1J-9671 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13850234
 

4W-5632: PUMP GP-GOV & FUEL INJ

4W5632 GOVERNOR AND FUEL INJECTION PUMP GP
S/N 30A1176-2548
4W5634-PAGE 57.01
PART OF 4W5631 GOVERNOR & FUEL INJECTION PUMP
c324756 SEBP1385
4W5632 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6804 [1] SPRING-GOVERNOR  
2. 6L-5773 [1] GASKET  
3. 4N-0527 [1] SPRING  
4. 2M-5471 [2] BOLT  
5. 4N-0508 [1] GASKET-COVER  
6. 4W-5634 Y [1] GOV & FUEL INJ PUMP GP  
7. 4N-1591 [1] COVER AS-SPRING  
  6N-0411 [1] COVER-TORQUE SPRING  
8. 6N-0412 [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER 1.52MM(.06IN)THK  
  8F-1326 [1] WASHER .813MM(.032IN)THK  
9. 2P-3200 [1] BOLT-WASHER HEAD  
  1J-9671 [1] SEAL-O-RING  
10. 3L-5987 [1] COVER  
11. 0S-1616 [2] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13850235
 

7C-8972: PUMP GP-GOV & FUEL INJ

7C8972 GOVERNOR & FUEL INJECTION GP
7C8973-PAGE 57.17
FIELD REPLACEMENT FOR 7C9666 PUMP. WHEN USED IN
CONJUNCTION WITH OTHER GPS.
c406647 SEBP1385
7C8972 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8973 Y [1] GOV & FUEL INJ PUMP GP  
2. 9M-9729 [1] SEAL-O-RING  
3. 8M-8157 [1] SEAL 9.19MM(.362IN)ID  
   
  8M-5661 F [1] SEAL-O-RING (TACH DRIVE)  
    47.22MM(1.86IN)ID
  9L-7630 F [2] GASKET-AIR INLET  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP13850236
 

7C-9666: PUMP GP-GOV & FUEL INJ

7C9666 PUMP GP-GOVERNOR & FUEL INJECTION
7C9665-PAGE 57.06,5N9234-PAGE 72,6N0509-PAGE 60
FIELD RELACEMENT ORDER 7C8972 PUMP GP, 1-1W9070 DIODE AS,
1-8C5524 SOLENOID AS, 2-4F7957 BOLT & 1-4N0117 GASKET
c408730 SEBP1385
7C9666 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0509 Y [1] TORQUE CONTROL GP  
2. 4N-0443 [1] PIN-LOAD STOP  
3. 5N-9234 Y [1] SHUT-OFF GP-ELECTRICAL  
4. 7C-9665 Y [1] GOV & FUEL INJ PUMP GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13850237
 

9N-5778: PUMP GP-GOV & FUEL INJ

9N5778 GOVERNOR & FUEL INJECTION PUMP GP-PART 1 OF 4
S/N 30A210-1175
PART OF 1W7363 & 9N5863 GOVERNOR & FUEL INJECTION PUMPS
c315400 SEBP1385
9N5778 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5857 [8] PUMP AS-FUEL INJECTION  
    (EACH INCLUDES)
  8N-1417 [1] BONNET-VALVE  
2. 8N-1415 [1] SPRING-CHECK  
  8N-1414 [1] CHECK AS-PUMP  
3. 4N-0224 [1] RING-RETAINER  
4. 9N-5862 [1] SPRING-LIFTER  
5. 4N-2728 [1] WASHER-RETAINER  
6. 4N-0218 [8] BUSHING  
7. 9N-5827 [8] ROLLER-FUEL PUMP LIFT  
8. 9N-5817 [8] LIFTER-PLUNGER  
9. 6F-6672 [8] SEAL-O-RING  
10. 7N-1359 [1] FLANGE-INLET  
11. 2M-5471 [2] BOLT  
12. 4N-3088 [1] GASKET-INLET  
13. 6N-1716 [1] VALVE AS  
14. 3J-7354 [1] SEAL-O-RING  
15. 9F-6641 [4] BOLT  
16. 4N-2954 [1] SLEEVE-CAMSHAFT  
17. 4N-1132 [1] BODY AS-TRANSFER PUMP  
18. 8S-6814 [1] PIN  
19. 4N-1584 [1] SEAL-LIP TYPE  
20. 4N-0636 [1] SEAL-LIP TYPE  
21. 8H-9804 [1] SHAFT-PUMP IDLER  
22. 4N-0429 [1] GEAR-PUMP (15 TEETH)  
23. 4N-0406 [1] GEAR-PUMP (10 TEETH)  
24. 5M-6509 [1] SEAL-O-RING  
25. 4N-1767 [1] VALVE-BYPASS  
26. 4N-0605 [1] SPRING  
27. 4N-0975 [1] GASKET-CHECK VALVE  
28. 7N-1364 [1] FLANGE AS-CHECK VALVE  
29. 1P-2298 [1] VALVE AS  
 

#SEBP13850238
 

9N-5778: PUMP GP-GOV & FUEL INJ

9N5778 GOVERNOR & FUEL INJECTION PUMP GP-PART 2 OF 4
S/N 30A210-1175
PART OF 1W7363 & 9N5863 GOVERNOR & FUEL INJECTION PUMPS
c315401 SEBP1385
9N5778 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-2773 [1] SHAFT AS-CONTROL  
2. 1D-4716 [1] NUT-FULL  
3. 4N-2708 [1] SETSCREW  
4. 4N-0528 [1] SHAFT-LEVER  
5. 4N-9828 [1] SHAFT AS-CONTROL  
6. 4N-3922 [1] LEVER AS-CONNECTION  
7. 2N-2658 [10] BOLT-SOCKET HEAD  
8. 9N-5820 [8] LEVER-CONTROL  
9. 4N-0563 [1] LEVER-SHAFT CONNECTION  
10. 9L-6807 [1] SHAFT-CONTROL  
11. 4N-1809 [1] LEVER AS-SEAT  
12. 031-0214 [2] BOLT-SELF LOCKING  
13. 9M-1311 [1] NUT-JAM  
14. 6N-4176 [1] SCREW-SET  
15. 4N-0445 [1] LEVER-LOAD STOP  
16. 4N-0523 [1] DOWEL-STOP SUPPORT  
17. 2D-6392 [2] SEAL-O-RING  
18. 4N-3329 [2] WASHER  
19. 6N-7523 [1] WASHER  
20. 8F-8178 [1] BOLT  
21. 1D-4533 [3] BOLT  
22. 2A-4781 [3] BOLT  
   
   
   
   
23. 8N-3946 [1] HOUSING AS-GOVERNOR  
24. 4N-2333 [1] PIN-SPRING  
25. 8S-6814 [2] PIN  
26. 9L-9503 [1] DOWEL-HOLLOW  
27. 9S-4182 [1] PLUG  
28. 3J-7354 [1] SEAL-O-RING  
29. 8N-3945 [1] BUSHING  
30. 2W-4037 [1] SEAL-LIP TYPE  
31. 4N-2677 [1] LEVER AS-RISER  
32. 3H-0442 [1] SEAL-O-RING  
33. 2M-7819 [1] RING-RETAINING  
34. 6L-3921 [1] WASHER-SEALING  
 

#SEBP13850239
 

9N-5778: PUMP GP-GOV & FUEL INJ

9N5778 GOVERNOR & FUEL INJECTION PUMP GP-PART 3 OF 4
S/N 30A210-1175
PART OF 1W7363 & 9N5863 GOVERNOR & FUEL INJECTION PUMPS
c315402 SEBP1385
9N5778 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1615 [7] BOLT  
2. 3J-7354 [1] SEAL-O-RING  
3. 9S-4182 [1] PLUG  
4. 8H-3127 [2] BOLT  
5. 9S-9332 [1] FITTING-ELBOW  
6. 6N-1729 [1] COVER-PUMP HOUSING  
7. 6D-3031 [4] SCREW-SOCKET HEAD  
8. 4N-0941 [1] LEVER-LIMITER  
9. 4N-0505 [1] GASKET-HOUSING  
10. 4N-0935 [1] HOUSING AS (SHUT-OFF)  
  4N-3713 [1] SEAL-LIP TYPE  
11. 4N-0595 [1] GASKET-TOP COVER  
12. 9N-5861 [1] HOUSING AS-PUMP  
  9S-4180 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
13. 9N-5821 [1] DEFLECTOR-PULSE  
14. 4N-1826 [2] DOWEL  
15. 2D-6392 [2] SEAL-O-RING  
16. 5P-4810 [1] BEARING  
17. 8N-0628 [1] BEARING  
18. 4N-2333 [1] PIN-SPRING  
19. 8N-0984 [8] PIN-SPRING  
20. 4N-5481 [1] STUD  
21. 1P-4001 [1] FITTING  
22. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
23. 4N-0532 [1] GASKET-COVER  
24. 4N-0531 [1] COVER-IDLE SCREW  
25. 6L-1756 [2] BOLT  
26. 4N-0938 [1] SHAFT-LEVER  
27. 4N-0940 [1] LEVER-SHUT-OFF  
28. 4N-0937 [1] SHAFT-LEVER  
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Governor
3208 GENERATOR SET ENGINES
Governor And Fuel Injection Pump Drive Group
3208 GENERATOR SET ENGINES
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 GENERATOR SET ENGINE
Fuel Transfer Pump
3208 GENERATOR SET ENGINE
Governor
3208 GENERATOR SET ENGINE
Shutoff Housing, Check Valve And Bypass Valve
3208 GENERATOR SET ENGINE
Fuel Injection Pumps
3208 GENERATOR SET ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Fuel Shutoff Solenoid Seals Better {1259,1286}
1981/10/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20

Caterpillar Parts SIS Catalog 3208 :

PUMP GP-GOV & FUEL INJ
4W-6738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-6738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-6066 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-6065 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-0892 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-0892 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-0892 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-0892 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-6738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-6738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1W-7363 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5632 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8972 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-9666 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9N-5778 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9N-5778 PUMP GP-GOV & FUEL INJ

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.