AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C8928 GOVERNOR & FUEL INJECTION PUMP GP-PART 4 OF 5 TYPE 1 PART OF 7C9665 & 7C8973 GOVERNOR & FUEL INJECTION PUMPS 3208


FUEL SYSTEM
GOVERNOR GP

GEN SET ENGINE 3208 GEN SET ENGINE 30A
 3208 GENERATOR SET ENGINE 30A00210-05099 SEBP1385 3208 30A   (1982)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
 

#SEBP13850250
 

7C-8928: PUMP GP-GOV & FUEL INJ

7C8928 GOVERNOR & FUEL INJECTION PUMP GP-PART 4 OF 5
TYPE 1
PART OF 7C9665 & 7C8973 GOVERNOR & FUEL INJECTION PUMPS
c456522 SEBP1385
7C8928 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-6641 [4] BOLT  
2. 4N-2954 [1] SLEEVE-CAMSHAFT  
3. 4N-1132 [1] BODY AS-TRANSFER PUMP  
4. 8S-6814 [1] PIN  
5. 4N-1584 [1] SEAL-LIP TYPE  
6. 4N-0636 [1] SEAL-LIP TYPE  
7. 8H-9804 [1] SHAFT-PUMP IDLER  
8. 4N-0429 [1] GEAR-PUMP (15 TEETH)  
9. 4N-0406 [1] GEAR-PUMP (10 TEETH)  
10. 5M-6509 [1] SEAL-O-RING  
11. 4N-1767 [1] VALVE-BYPASS (FUEL)  
12. 4N-0605 [1] SPRING  
 

#SEBP13850251
 

7C-8928: PUMP GP-GOV & FUEL INJ

7C8928 GOVERNOR & FUEL INJECTION PUMP GP-PART 5 OF 5
TYPE 1
PART OF 7C9665 & 7C8973 GOVERNOR & FUEL INJECTION PUMPS
c592419 SEBP1385
7C8928 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4276 [1] SEAT-SPRING  
2. 4N-6408 [1] PISTON AS  
3. 4N-6406 [1] RING-SPACER  
4. 4N-6404 [1] RING-RETAINING  
5. 4N-6407 [1] SPOOL-DASHPOT  
6. 6N-2517 [1] SPRING-DASHPOT  
7. 2W-8623 [1] SEAT-SPRING  
8. 4N-0434 [1] RISER-GOVERNOR  
9. 4N-2927 [2] RACE-THRUST BEARING  
10. 4N-2953 [1] LOCKRING  
11. 4N-3779 [1] KEY-CAMSHAFT  
12. 9N-5858 [1] CAMSHAFT-FUEL PUMP  
13. 8N-2663 [1] CARRIER-WEIGHT  
14. 8N-2662 [3] BOLT-SOCKET HEAD  
15. 4N-1723 [1] SHIELD-CARRIER  
16. 4N-0425 [3] WEIGHT-GOVERNOR  
17. 4N-0511 [3] DOWEL  
18. 4N-5482 [1] SHAFT-WEIGHT CARRIER  
19. 4N-9019 [1] DOWEL  
20. 9N-5822 [1] WASHER-THRUST  
21. 7M-7219 [1] BEARING-THRUST  
 

#SEBP13850252
 

7C-8928: PUMP GP-GOV & FUEL INJ

7C8928 GOVERNOR & FUEL INJECTION PUMP GP-PART 1 OF 5
TYPE 2
PART OF 7C9665 & 7C8973 GOVERNOR & FUEL INJECTION PUMPS
c503019 SEBP1385
7C8928 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-3010 [8] PUMP AS-FUEL INJECTION  
    (EACH INCLUDES)
2. 9N-5862 [1] SPRING-LIFTER  
3. 4N-2728 [1] WASHER-RETAINER  
4. 7W-8039 [8] BONNET-VALVE  
5. 4N-0224 [8] RING-RETAINER  
6. 7W-8120 [8] BUSHING  
7. 9N-5827 [8] ROLLER-FUEL PUMP LIFT  
8. 9N-5817 [8] LIFTER-PLUNGER  
9. 6F-6672 [8] SEAL-O-RING  
10. 1W-6987 [8] VALVE AS-CHECK  
11. 2M-5471 [2] BOLT  
12. 7C-9966 [1] INSERT  
13. 9Y-0546 C [1] FLANGE AS  
14. 7E-5346 [1] VALVE AS  
15. 4N-0975 [1] GASKET-CHECK VALVE  
16. 6N-1716 [1] VALVE AS  
17. 3J-7354 [1] SEAL-O-RING  
18. 8N-1415 [8] SPRING-CHECK  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13850253
 

7C-8928: PUMP GP-GOV & FUEL INJ

7C8928 GOVERNOR & FUEL INJECTION PUMP GP-PART 2 OF 5
TYPE 2
PART OF 7C9665 & 7C8973 GOVERNOR & FUEL INJECTION PUMPS
c632636 SEBP1385
7C8928 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-2773 [1] SHAFT AS-CONTROL  
2. 5S-0003 [1] NUT-FULL  
3. 4N-2708 [1] SETSCREW  
4. 4N-0528 [1] SHAFT-LEVER  
5. 4N-9828 [1] SHAFT AS-CONTROL  
6. 4N-3922 [1] LEVER AS-CONNECTION  
7. 2N-2658 [10] BOLT-SOCKET HEAD  
8. 9N-5820 [8] LEVER-CONTROL  
9. 126-4144 [1] LEVER-SHAFT  
10. 124-5941 [1] SHAFT-CONTROL  
11. 7C-6201 [1] LEVER-SEAT  
12. 7C-6202 [1] LEVER  
13. 6F-0612 [1] NUT-JAM  
  6L-3921 [1] WASHER-SEAL  
14. 6N-4176 [1] SETSCREW  
15. 4N-0445 [1] LEVER-LOAD STOP  
  2M-7819 [1] RING-RETAINING  
16. 4N-0523 [1] DOWEL-STOP SUPPORT  
17. 2D-6392 [2] SEAL-O-RING  
18. 4N-3329 [2] WASHER  
19. 6N-7523 [1] WASHER  
20. 8F-8178 [1] BOLT  
21. 1D-4533 [3] BOLT  
22. 2A-4781 [3] BOLT  
   
   
23. 8N-3946 [1] HOUSING AS-GOVERNOR  
24. 4N-2333 [1] PIN-SPRING  
25. 8S-6814 [2] PIN  
26. 9Y-4966 C [1] VALVE AS-RELIEF  
  2D-6392 [1] SEAL-O-RING  
27. 9S-4182 [1] PLUG  
28. 3J-7354 [1] SEAL-O-RING  
29. 8N-3945 [1] BUSHING-TERMINAL  
30. 2W-4037 [1] SEAL-LIP  
31. 7X-2395 C [1] BOLT-LOCKING  
32. 3H-0442 [1] SEAL-O-RING  
33. 128-7347 [1] LEVER AS-RISER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13850254
 

7C-8928: PUMP GP-GOV & FUEL INJ

7C8928 GOVERNOR & FUEL INJECTION PUMP GP-PART 3 OF 5
TYPE 2
PART OF 7C9665 & 7C8973 GOVERNOR & FUEL INJECTION PUMPS
c632637 SEBP1385
7C8928 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1615 [7] BOLT  
2. 3J-7354 [1] SEAL-O-RING  
3. 9S-4182 [1] PLUG  
4. 8H-3127 [2] BOLT  
5. 9S-9332 [1] FITTING-ELBOW  
6. 124-5939 [1] COVER-FUEL PUMP HOUSING  
7. 6D-3031 [4] SCREW-SOCKET HEAD  
8. 4N-0941 [1] LEVER-LIMITER  
9. 4N-0505 [1] GASKET-HOUSING  
10. 128-2974 [1] HOUSING AS  
11. 4N-3713 [1] SEAL-LIP  
12. 132-2117 [1] HOUSING AS-PUMP  
13. 9N-5821 [2] DEFLECTOR-PULSE  
14. 4N-1826 [2] DOWEL  
15. 2D-6392 [2] SEAL-O-RING  
16. 3H-0703 [1] DOWEL  
17. 8N-0984 [8] PIN-SPRING  
18. 4N-5481 [1] STUD  
19. 9S-4180 [1] PLUG-O-RING  
20. 4J-7533 [1] SEAL-O-RING  
21. 4N-0940 [1] LEVER-SHUTOFF  
22. 124-5942 [1] SHAFT-SOLENOID  
23. 4N-0532 [1] GASKET-COVER  
24. 4N-0531 [1] COVER-IDLE SCREW  
25. 6L-1756 [2] BOLT  
26. 4N-0938 [1] SHAFT-LEVER  
27. 127-7139 [1] GASKET-TOP COVER  
28. 1P-4001 [1] FITTING  
29. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
 

#SEBP13850255
 

7C-8928: PUMP GP-GOV & FUEL INJ

7C8928 GOVERNOR & FUEL INJECTION PUMP GP-PART 4 OF 5
TYPE 2
PART OF 7C9665 & 7C8973 GOVERNOR & FUEL INJECTION PUMPS
c456522 SEBP1385
7C8928 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-6641 [4] BOLT  
2. 4N-2954 [1] SLEEVE-CAMSHAFT  
3. 4N-1132 [1] BODY AS-TRANSFER PUMP  
4. 8S-6814 [1] PIN  
5. 4N-1584 [1] SEAL-LIP TYPE  
6. 4N-0636 [1] SEAL-LIP TYPE  
7. 8H-9804 [1] SHAFT-PUMP IDLER  
8. 4N-0429 [1] GEAR-PUMP (15 TEETH)  
9. 4N-0406 [1] GEAR-PUMP (10 TEETH)  
10. 5M-6509 [1] SEAL-O-RING  
11. 4N-1767 [1] VALVE-BYPASS (FUEL)  
12. 4N-0605 [1] SPRING  
 

#SEBP13850256
 

7C-8928: PUMP GP-GOV & FUEL INJ

7C8928 GOVERNOR & FUEL INJECTION PUMP GP-PART 5 OF 5
TYPE 2
PART OF 7C9665 & 7C8973 GOVERNOR & FUEL INJECTION PUMPS
c592419 SEBP1385
7C8928 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4276 [1] SEAT-SPRING  
2. 4N-6408 [1] PISTON AS  
3. 4N-6406 [1] RING-SPACER  
4. 4N-6404 [1] RING-RETAINING  
5. 4N-6407 [1] SPOOL-DASHPOT  
6. 6N-2517 [1] SPRING-DASHPOT  
7. 2W-8623 [1] SEAT-SPRING  
8. 4N-0434 [1] RISER-GOVERNOR  
9. 4N-2927 [2] RACE-THRUST BEARING  
10. 4N-2953 [1] LOCKRING  
11. 4N-3779 [1] KEY-CAMSHAFT  
12. 9N-5858 [1] CAMSHAFT-FUEL PUMP  
13. 8N-2663 [1] CARRIER-WEIGHT  
14. 8N-2662 [3] BOLT-SOCKET HEAD  
15. 4N-1723 [1] SHIELD-CARRIER  
16. 4N-0425 [3] WEIGHT-GOVERNOR  
17. 4N-0511 [3] DOWEL  
18. 4N-5482 [1] SHAFT-WEIGHT CARRIER  
19. 4N-9019 [1] DOWEL  
20. 9N-5822 [1] WASHER-THRUST  
21. 7M-7219 [1] BEARING-THRUST  
 

#SEBP13850257
 

7C-8973: PUMP GP-GOV & FUEL INJ

7C8973 GOVERNOR & FUEL INJECTION GP
7C8928-PAGE 57.07, 6N0509-PAGE 60
PART OF 7C8972 GOVERNOR & FUEL INJECTION
c632221 SEBP1385
7C8973 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9226 [1] SPRING (OUTER)  
2. 4N-5663 [1] SPRING (INNER)  
3. 4N-0527 [1] SPRING  
4. 7L-8070 [2] BOLT-HEAD  
5. 4F-7957 [4] BOLT  
6. 4N-8507 [1] COVER  
  2W-5447 [1] GASKET  
7. 6N-0509 Y [1] TORQUE CONTROL GP  
8. 4N-0443 [1] PIN-LOAD STOP  
9. 7C-8928 Y [1] PUMP GP-GOV & FUEL INJ  
10. 3L-5987 [1] COVER  
  6L-5773 [1] GASKET  
11. 134-3857 [1] COVER AS-TORQUE SPRING  
12. 3K-8460 [1] PLUG  
  1J-9671 [1] SEAL-O-RING  
13. 4B-2042 [1] NUT  
  6N-0412 [1] SCREW AS-MACHINE  
  3B-4501 [1] LOCKWASHER  
  8F-1326 [1] WASHER (.813MM(.032IN)THK)  
  1P-7326 [1] WASHER (1.52MM(.06IN)THK)  
14. 117-0287 [1] GASKET-TORQUE SPRING COVER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13850258
 

9N-5864: PUMP GP-GOV & FUEL INJ

9N5864 GOVERNOR AND FUEL INJECTION PUMP GP-FIELD INSTALLATION*R
S/N 30A210-1175
FIELD REPLACEMENT FOR 1W7362-PAGE 51
SEBP13850258 SEBP1385
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
   
   
   
   
   
   
   
   
   
  9N-5863 Y [1] GOVERNOR & FUEL INJECTION PUMP GROUP  
   
  4N-0556 [1] GASKET-GOVERNOR HOUSING  
   
  4N-0532 [1] GASKET-IDLE SCREW COVER  
   
  4N-0508 [1] GASKET-TORQUE SPRING COVER  
   
  9L-7630 [2] GASKET-CROSS OVER PIPE  
   
  8M-8157 [1] SEAL-GOVERNOR HOUSING TO CYLINDER BLOCK  
   
  9M-9729 [1] SEAL-FUEL PUMP HOUSING  
   
  8M-5661 [1] SEAL-TACHOMETER DRIVE  
   
  7N-3807 [1] SPRING-GOVERNOR HIGH IDLE (1.23 N/MM)  
   
  6N-2129 [1] SPRING-GOVERNOR HIGH IDLE (1.576 N/MM)  
   
  4N-6119 [1] SPRING-GOVERNOR HIGH IDLE (2.10 N/MM)  
   
  4N-5661 [1] SPRING-GOVERNOR HIGH IDLE (2.452 N/MM)  
   
  6N-6662 [1] SPRING-OVER FUELING  
   
    FORM SMHS7595
  Y   SEPARATE ILLUSTRATION
 

#SEBP13850259
 

9N-5863: PUMP GP-GOV & FUEL INJ

9N5863 GOVERNOR AND FUEL INJECTION PUMP GP-FIELD INSTALLATION
S/N 30A210-1175
9N5778-PAGE 53, 6N0509-PAGE 60
PART OF 9N5864 GOVERNOR & FUEL INJECTION PUMP
c636395 SEBP1385
9N5863 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9226 [1] SPRING (OUTER)  
2. 4N-5663 [1] SPRING (INNER)  
3. 4N-0527 [1] SPRING  
4. 7L-8070 [2] BOLT-HEAD  
5. 4F-7957 [4] BOLT  
6. 4N-8507 [1] COVER  
  2W-5447 [1] GASKET  
7. 6N-0509 Y [1] TORQUE CONTROL GP  
8. 4N-0443 [1] PIN-LOAD STOP  
9. 9N-5778 Y [1] PUMP GP-GOV & FUEL INJ  
10. 3L-5987 [1] COVER  
  6L-5773 [1] GASKET  
11. 134-3857 [1] COVER AS-TORQUE SPRING  
  116-4151 [1] COVER-TORQUE SPRING  
12. 2P-3200 [1] BOLT-WASHER HEAD  
  1J-9671 [1] SEAL-O-RING  
13. 4B-2042 [1] NUT  
  6N-0412 [1] SCREW AS-MACHINE  
  3B-4501 [1] LOCKWASHER  
  8F-1326 [1] WASHER (.813MM(.032IN)THK)  
  1P-7326 WASHER (1.52MM(.06IN)THK)  
  3K-8460 [1] PLUG  
14. 117-0287 [1] GASKET-TORQUE SPRING COVER  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Governor
3208 GENERATOR SET ENGINES
Governor And Fuel Injection Pump Drive Group
3208 GENERATOR SET ENGINES
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 GENERATOR SET ENGINE
Fuel Transfer Pump
3208 GENERATOR SET ENGINE
Governor
3208 GENERATOR SET ENGINE
Shutoff Housing, Check Valve And Bypass Valve
3208 GENERATOR SET ENGINE
Fuel Injection Pumps
3208 GENERATOR SET ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Fuel Shutoff Solenoid Seals Better {1259,1286}
1981/10/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20

Caterpillar Parts SIS Catalog 3208 :

PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-9665 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5634 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5634 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5634 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5634 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8928 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8973 PUMP GP-GOV & FUEL INJ
9N-5864 PUMP GP-GOV & FUEL INJ

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.