AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T5531 PUMP GP-GEAR TRANSMISSION S/N 8EA311-UP & 8CA1378-2026 PART OF 9J5010 & 4T5205 CONTROL ARS 973


POWER TRAIN
PUMP GP
MOTOR GP

TRACK LOADER 973 TRACK LOADER 86G
 973 LGP TRACK-TYPE LOADER 86G00001-02999 (MACHINE) POWERED BY 3306 ENGINE SEBP1387 973 86G   (1982)

POWER TRAIN

PUMP GP
PUMP GP-GEAR
9T-5531 PUMP GP-GEAR
PUMP GP-GEAR
3G-2185 PUMP GP-GEAR
PUMP GP-GEAR
6E-1224 PUMP GP-GEAR
ROTATING GP-PUMP
9J-4833 ROTATING GP-PUMP
 

#SEBP13870420
 

9T-5531: PUMP GP-GEAR

9T5531 PUMP GP-GEAR
TRANSMISSION S/N 8EA311-UP & 8CA1378-2026
PART OF 9J5010 & 4T5205 CONTROL ARS
c473088 SEBP1387
9T5531 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your 973 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3675 [1] SEAL-LIP TYPE  
2. 002-3455 [1] RING-RETAINING  
3. 9T-7073 [8] STUD  
  5P-8244 [8] WASHER  
  5B-3254 [8] NUT  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE
  1U-4628 [1] KIT-SEAL  
 

#SEBP13870421
 

3G-2185: PUMP GP-GEAR

3G2185 PUMP GP-GEAR
FIXED DISPLACEMENT
TRANSMISSION S/N 8CA1-1377 & 8EA1-310
PART OF 9J5010 & 4T5205 CONTROL ARS
c235633 SEBP1387
3G2185 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your 973 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7604 [1] RING-RETAINING  
2. 6V-3675 [1] SEAL-LIP TYPE  
3. 5B-3254 [8] NUT  
  5P-8244 [8] WASHER  
4. 1U-3192 [8] STUD  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  1U-4628 [1] KIT-SEAL  
 

#SEBP13870422
 

6E-1224: PUMP GP-GEAR

6E1224 PUMP GP-GEAR
TRANSMISSION S/N 8CA2027-UP
PART OF 9J5010 CONTROL AR
c517002 SEBP1387
6E1224 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your 973 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7604 [1] RING-RETAINING  
2. 6V-3675 [1] SEAL-LIP TYPE  
3. 5B-3254 [8] NUT  
  5P-8244 [8] WASHER  
4. 1U-3192 [8] STUD  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  6E-3687 [1] KIT-SEAL  
 

#SEBP13870423
 

3G-5014: MOTOR GP-PISTON

3G5014 MOTOR GP-PISTON LINK-2 REQUIRED-PART 1 OF 2
HYDROSTATIC
TYPE 1. S/N 86G1-170
3G3256-PAGE 124
c754059 SEBP1387
3G5014 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 973 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-0438 [1] SPRING  
  9J-5716 [1] TUBE  
2. 4T-2602 [1] SHAFT-GOVERNOR CONTROL  
3. 5H-6005 [3] SEAL-O-RING  
4. 3G-3256 Y [1] VALVE GP-SHUTTLE  
5. 1N-7543 [4] BOLT-LOCKING  
6. 9M-1974 [4] WASHER-HARD  
7. 2A-1531 [2] BOLT  
8. 4T-4042 C [2] SPRING  
9. 4T-4041 C [2] SPRING  
10. 1U-1967 [1] BEARING-ROLLER  
11. 1U-1965 R [1] BARREL AS-CYLINDER  
12. 3G-9710 [2] BOLT-STOP  
  3G-9709 [2] LOCKNUT  
13. 3G-9713 [2] BLOCK  
14. 3G-9714 [2] SEAT-SPRING  
15. 4T-0905 [1] JOINT AS  
  2R-1256 [2] RING-RETAINING  
16. 3G-9702 [1] BODY-MOTOR  
  9S-8008 [4] PLUG-O-RING  
  3D-2824 [4] SEAL-O-RING  
17. 3G-5755 [1] PLATE AS-DRIVE  
18. 3G-3739 [9] INSERT-BEARING  
19. 5H-3182 [1] PIN-SPRING  
20. 3G-5940 [1] NUT  
21. 8J-6242 [1] SEAL-LIP  
22. 3F-5792 [1] SEAL-O-RING  
23. 3G-9705 [1] PISTON  
24. 1U-3998 [1] SEAL AS  
25. 7F-2122 [1] SEAL-O-RING  
26. 8J-2559 [1] PLATE-CAUTION  
  4B-4158 [4] SCREW  
27. 8J-6273 [9] RING-RETAINING  
28. 3G-9706 [1] SLEEVE  
29. 1U-1095 [1] RING-RETAINING  
30. 3G-9708 [1] LINK-PISTON  
31. 6J-7836 [2] RING-SNAP  
32. 8J-6276 [2] RETAINER  
33. 1U-4019 [2] INSERT-BEARING  
34. 1U-4805 R [9] PISTON AS  
    (EACH INCLUDES)
35. 9J-8051 [1] RETAINER  
36. 6J-7836 [1] RING-SNAP  
37. 8J-6276 [1] RETAINER  
38. 4T-4038 C [2] RETAINER  
39. 4T-4040 C [2] SPRING  
40. 4T-4039 C [2] RETAINER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13870424
 

3G-5014: MOTOR GP-PISTON

3G5014 MOTOR GP-PISTON LINK-2 REQUIRED-PART 2 OF 2
HYDROSTATIC
TYPE 1. S/N 86G1-170
c754060 SEBP1387
3G5014 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 973 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
41. 3G-2629 [1] RETAINER  
42. 0S-1566 [1] BOLT  
  8J-6236 [1] LOCK  
43. 5J-5794 [8] BOLT  
44. 7K-6058 [8] BOLT-12 POINT HEAD  
45. 1U-1971 [1] HEAD-MOTOR  
46. 8B-1312 [2] DOWEL  
47. 1P-3705 [4] SEAL-RECTANGULAR  
48. 3G-9720 [1] TRUNNION  
49. 3G-9721 [1] GASKET  
50. 5P-0049 [2] COVER  
51. 5P-8077 [4] FLANGE-HALF  
52. 6J-5541 [2] SEAL-O-RING  
53. 3G-9723 [2] BALL BEARING  
54. 9J-0747 [1] BEARING AS  
55. 1H-5338 [1] CUP-ROLLER BEARING  
56. 2K-5097 [1] CONE-ROLLER BEARING  
57. 0S-1618 [6] BOLT  
  9M-1974 [6] WASHER-HARD  
58. 8J-6869 [1] RETAINER  
59. 8J-6239 [1] LOCK-NUT  
60. 8J-6277 [1] SHIM 1.26MM(.049IN)THK  
  8J-6278 [5] SHIM .076MM(.003IN)THK  
  8J-6279 [5] SHIM .127MM(.005IN)THK  
61. 1H-9696 [2] SEAL-O-RING  
62. 3G-9716 [2] COVER  
63. 5P-4255 [8] BOLT-LOCKING  
64. 1U-3999 [2] ROTOR  
65. 8S-2331 [8] BOLT-12 POINT HEAD  
  5P-8247 [8] WASHER-HARD  
66. 1T-0822 [20] BOLT-12 POINT HEAD  
67. 1U-2675 [1] PLATE-PORT  
68. 3G-9718 [1] COVER  
69. 3G-9717 [2] BOLT-STOP  
70. 0S-0130 [1] PIN  
71. 7J-4169 [1] RING-SNAP  
72. 4T-2625 [1] RETAINER  
73. 4T-2675 [1] RACE-THRUST  
74. 4T-2603 [1] BEARING-THRUST  
75. 4T-2674 [1] RACE-THRUST  
76. 4T-2673 [1] SPRING  
77. 4T-2676 [1] RETAINER  
78. 035-2297 [1] RING-RETAINING  
79. 3G-9724 [4] SEAL  
80. 3G-9726 [4] SEAL  
81. 3G-9725 [4] RING-BACKUP  
 

#SEBP13870425
 

3G-5014: MOTOR GP-PISTON

3G5014 MOTOR GP-PISTON LINK-2 REQUIRED-PART 1 OF 2
HYDROSTATIC
TYPE 2. S/N 86G1-170
3G3256-PAGE 124
c754063 SEBP1387
3G5014 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 973 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-0438 [1] SPRING  
  9J-5716 [1] TUBE  
2. 4T-2602 [1] SHAFT-GOVERNOR CONTROL  
3. 5H-6005 [3] SEAL-O-RING  
4. 3G-3256 Y [1] VALVE GP-SHUTTLE  
5. 1N-7543 [4] BOLT-LOCKING  
6. 9M-1974 [4] WASHER-HARD  
7. 6V-6633 C [2] BOLT  
8. 4T-4042 [2] SPRING  
9. 4T-4041 [2] SPRING  
10. 1U-1967 [1] BEARING-ROLLER  
11. 1U-1965 R [1] BARREL AS-CYLINDER  
12. 3G-9710 [2] BOLT-STOP  
  3G-9709 [2] LOCKNUT  
13. 4T-4160 C [2] BLOCK-BEARING  
14. 3G-9714 [2] SEAT-SPRING  
15. 4T-0905 [1] JOINT AS  
  2R-1256 [2] RING-RETAINING  
16. 3G-9702 [1] BODY-MOTOR  
  9S-8008 [4] PLUG-O-RING  
  3D-2824 [4] SEAL-O-RING  
17. 3G-5755 [1] PLATE AS-DRIVE  
18. 3G-3739 [9] INSERT-BEARING  
19. 5H-3182 [1] PIN-SPRING  
20. 3G-5940 [1] NUT  
21. 8J-6242 [1] SEAL-LIP  
22. 3F-5792 [1] SEAL-O-RING  
23. 3G-9705 [1] PISTON  
24. 1U-3998 [1] SEAL AS  
25. 7F-2122 [1] SEAL-O-RING  
26. 8J-2559 [1] PLATE-CAUTION  
  4B-4158 [4] SCREW  
27. 8J-6273 [9] RING-RETAINING  
28. 3G-9706 [1] SLEEVE  
29. 1U-1095 [1] RING-RETAINING  
30. 3G-9708 [1] LINK-PISTON  
31. 6J-7836 [2] RING-SNAP  
32. 8J-6276 [2] RETAINER  
33. 1U-4019 [2] INSERT-BEARING  
34. 1U-4805 R [9] PISTON AS  
    (EACH INCLUDES)
35. 9J-8051 [1] RETAINER  
36. 6J-7836 [1] RING-SNAP  
37. 8J-6276 [1] RETAINER  
38. 4T-4038 [2] RETAINER  
39. 4T-4040 [2] SPRING  
40. 4T-4039 [2] RETAINER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13870426
 

3G-5014: MOTOR GP-PISTON

3G5014 MOTOR GP-PISTON LINK-2 REQUIRED-PART 2 OF 2
HYDROSTATIC
TYPE 2. S/N 86G1-170
c754064 SEBP1387
3G5014 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 973 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
41. 3G-2629 [1] RETAINER  
42. 0S-1566 [1] BOLT  
  8J-6236 [1] LOCK  
43. 5J-5794 [8] BOLT  
44. 7K-6058 [8] BOLT-12 POINT HEAD  
45. 1U-1971 [1] HEAD-MOTOR  
46. 8B-1312 [2] DOWEL  
47. 1P-3705 [4] SEAL-RECTANGULAR  
48. 3G-9720 [1] TRUNNION  
49. 3G-9721 [1] GASKET  
50. 5P-0049 [2] COVER  
51. 5P-8077 [4] FLANGE-HALF  
52. 6J-5541 [2] SEAL-O-RING  
53. 3G-9723 [2] BALL BEARING  
54. 9J-0747 [1] BEARING AS  
55. 1H-5338 [1] CUP-ROLLER BEARING  
56. 2K-5097 [1] CONE-ROLLER BEARING  
57. 0S-1618 [6] BOLT  
  9M-1974 [6] WASHER-HARD  
58. 8J-6869 [1] RETAINER  
59. 8J-6239 [1] LOCK-NUT  
60. 8J-6277 [1] SHIM 1.245MM(.049IN)THICK  
  8J-6278 [5] SHIM .0762MM(.003IN)THICK  
  8J-6279 [5] SHIM .1270MM(.005IN)THICK  
61. 1H-9696 [2] SEAL-O-RING  
62. 3G-9716 [2] COVER  
63. 030-8535 C [8] BOLT-LOCKING  
64. 1U-3999 [2] ROTOR  
65. 8S-2331 [8] BOLT-12 POINT HEAD  
  5P-8247 [8] WASHER-HARD  
66. 1T-0822 [20] BOLT-12 POINT HEAD  
67. 1U-2675 [1] PLATE-PORT  
68. 3G-9718 [1] COVER  
69. 3G-9717 [2] BOLT-STOP  
70. 0S-0130 [1] PIN  
71. 7J-4169 [1] RING-SNAP  
72. 4T-2625 [1] RETAINER  
73. 4T-2675 [1] RACE-THRUST  
74. 4T-2603 [1] BEARING-THRUST  
75. 4T-2674 [1] RACE-THRUST  
76. 4T-2673 [1] SPRING  
77. 4T-2676 [1] RETAINER  
78. 035-2297 [1] RING-RETAINING  
79. 3G-9724 [4] SEAL  
80. 3G-9726 [4] SEAL  
81. 3G-9725 [4] RING-BACKUP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13870427
 

3G-5014: MOTOR GP-PISTON

3G5014 MOTOR GP-PISTON LINK-2 REQUIRED-PART 1 OF 2
HYDROSTATIC
TYPE 3. S/N 86G1-170
3G3256-PAGE 124
c754074 SEBP1387
3G5014 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 973 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-0438 [1] SPRING  
  9J-5716 [1] TUBE  
2. 4T-2602 [1] SHAFT-GOVERNOR CONTROL  
3. 5H-6005 [3] SEAL-O-RING  
4. 3G-3256 Y [1] VALVE GP-SHUTTLE  
5. 1N-7543 [4] BOLT-LOCKING  
6. 9M-1974 [4] WASHER-HARD  
7. 6V-6633 [2] BOLT  
8. 4T-4042 [2] SPRING  
9. 4T-4041 [2] SPRING  
10. 1U-1967 [1] BEARING-ROLLER  
11. 1U-1965 R [1] BARREL AS-CYLINDER  
12. 3G-9710 [2] BOLT-STOP  
  3G-9709 [2] LOCKNUT  
13. 4T-4160 [2] BLOCK-BEARING  
14. 3G-9714 [2] SEAT-SPRING  
15. 4T-0905 [1] JOINT AS  
  2R-1256 [2] RING-RETAINING  
16. 3G-9702 [1] BODY-MOTOR  
  9S-8008 [4] PLUG-O-RING  
  3D-2824 [4] SEAL-O-RING  
17. 3G-5755 [1] PLATE AS-DRIVE  
18. 3G-3739 [9] INSERT-BEARING  
19. 5H-3182 [1] PIN-SPRING  
20. 3G-5940 [1] NUT  
21. 8J-6242 [1] SEAL-LIP  
22. 3F-5792 [1] SEAL-O-RING  
23. 3G-9705 [1] PISTON  
24. 1U-3998 [1] SEAL AS  
25. 7F-2122 [1] SEAL-O-RING  
26. 8J-2559 [1] PLATE-CAUTION  
  4B-4158 [4] SCREW  
27. 8J-6273 [9] RING-RETAINING  
28. 3G-9706 [1] SLEEVE  
29. 1U-1095 [1] RING-RETAINING  
30. 3G-9708 [1] LINK-PISTON  
31. 6J-7836 [2] RING-SNAP  
32. 8J-6276 [2] RETAINER  
33. 1U-4019 [2] INSERT-BEARING  
34. 1U-4805 R [9] PISTON AS  
    (EACH INCLUDES)
35. 9J-8051 [1] RETAINER  
36. 6J-7836 [1] RING-SNAP  
37. 8J-6276 [1] RETAINER  
38. 4T-4038 [2] RETAINER  
39. 4T-4040 [2] SPRING  
40. 4T-4039 [2] RETAINER  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13870428
 

3G-5014: MOTOR GP-PISTON

3G5014 MOTOR GP-PISTON LINK-2 REQUIRED-PART 2 OF 2
HYDROSTATIC
TYPE 3. S/N 86G1-170
c754075 SEBP1387
3G5014 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 973 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
41. 3G-2629 [1] RETAINER  
42. 0S-1566 [1] BOLT  
  8J-6236 [1] LOCK  
43. 5J-5794 [8] BOLT  
44. 7K-6058 [8] BOLT-12 POINT HEAD  
45. 1U-1971 [1] HEAD-MOTOR  
46. 8B-1312 [2] DOWEL  
47. 1P-3705 [4] SEAL-RECTANGULAR  
48. 3G-9720 [1] TRUNNION  
49. 3G-9721 [1] GASKET  
50. 5P-0049 [2] COVER  
51. 5P-8077 [4] FLANGE-HALF  
52. 5H-3252 C [2] SEAL-O-RING  
53. 3G-9723 [2] BALL BEARING  
54. 9J-0747 [1] BEARING AS  
55. 1H-5338 [1] CUP-ROLLER BEARING  
56. 2K-5097 [1] CONE-ROLLER BEARING  
57. 0S-1618 [6] BOLT  
  9M-1974 [6] WASHER-HARD  
58. 8J-6869 [1] RETAINER  
59. 8J-6239 [1] LOCK-NUT  
60. 8J-6277 [1] SHIM 1.245MM(.049IN)THK  
  8J-6278 [5] SHIM .0726MM(.003IN)THK  
  8J-6279 [5] SHIM .1270MM(.005IN)THK  
61. 1H-9696 [2] SEAL-O-RING  
62. 4T-4569 C [2] COVER  
63. 5P-4255 C [8] BOLT-LOCKING  
64. 1U-3999 [2] ROTOR  
65. 8S-2331 [8] BOLT-12 POINT HEAD  
  5P-8247 [8] WASHER-HARD  
66. 1T-0822 [20] BOLT-12 POINT HEAD  
67. 1U-2675 [1] PLATE-PORT  
68. 3G-9718 [1] COVER  
69. 3G-9717 [2] BOLT-STOP  
70. 0S-0130 [1] PIN  
71. 7J-4169 [1] RING-SNAP  
72. 4T-2625 [1] RETAINER  
73. 4T-2675 [1] RACE-THRUST  
74. 4T-2603 [1] BEARING-THRUST  
75. 4T-2674 [1] RACE-THRUST  
76. 4T-2673 [1] SPRING  
77. 4T-2676 [1] RETAINER  
78. 035-2297 [1] RING-RETAINING  
79. 3G-9724 [4] SEAL  
80. 3G-9726 [4] SEAL  
81. 3G-9725 [4] RING-BACKUP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13870429
 

4T-5100: MOTOR GP-PISTON

4T5100 MOTOR GP-PISTON LINK-2 REQUIRED-PART 1 OF 2
S/N 86G171-206
3G3256-PAGE 124
c754372 SEBP1387
4T5100 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 973 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-0438 [1] SPRING  
  9J-5716 [1] TUBE  
2. 4T-2602 [1] SHAFT-GOVERNOR CONTROL  
3. 5H-6005 [3] SEAL-O-RING  
4. 3G-3256 Y [1] VALVE GP-SHUTTLE  
5. 1N-7543 [4] BOLT-LOCKING  
6. 9M-1974 [4] WASHER-HARD  
7. 6V-6633 [2] BOLT  
8. 4T-4042 [2] SPRING  
9. 4T-4041 [2] SPRING  
10. 1U-1967 [1] BEARING-ROLLER  
11. 1U-1965 R [1] BARREL AS-CYLINDER  
12. 9J-7243 [2] BOLT-ANGLE STOP  
  1D-5121 [2] NUT-JAM  
13. 4T-4160 [2] BLOCK-BEARING  
14. 3G-9714 [2] SEAT-SPRING  
15. 4T-7480 [1] UNIVERSAL JOINT AS  
  2R-1256 [2] RING-RETAINING  
16. 4T-5099 [1] BODY-MOTOR  
  9S-8008 [4] PLUG-O-RING  
  3D-2824 [4] SEAL-O-RING  
17. 3G-5755 [1] PLATE AS-DRIVE  
18. 3G-3739 [9] INSERT-BEARING  
19. 5H-3182 [1] PIN-SPRING  
20. 3G-5940 [1] NUT  
21. 4T-1941 [2] INSERT-BEARING  
22. 3F-5792 [1] SEAL-O-RING  
23. 3G-9705 [1] PISTON  
24. 1U-3998 [1] SEAL AS  
25. 7F-2122 [1] SEAL-O-RING  
26. 8J-2559 [1] PLATE-CAUTION  
  4B-4158 [4] SCREW  
27. 8J-6273 [9] RING-RETAINING  
28. 4T-2060 [1] SLEEVE  
29. 1U-1095 [1] RING-RETAINING  
30. 3G-9708 [1] LINK-PISTON  
31. 6J-7836 [2] RING-SNAP  
32. 8J-6276 [2] RETAINER  
33. 1U-4805 R [9] PISTON AS  
    (EACH INCLUDES)
34. 9J-8051 [1] RETAINER  
35. 6J-7836 [1] RING-SNAP  
36. 8J-6276 [1] RETAINER  
37. 4T-4038 [2] RETAINER  
38. 4T-4040 [2] SPRING  
39. 4T-4039 [2] RETAINER  
40. 2J-0157 [2] SEAL-O-RING  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Reuse And Salvage Guidelines
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}

Caterpillar Parts SIS Catalog 973 :

CYLINDER GP
3G-5016 CYLINDER GP
CYLINDER GP
3G-5017 CYLINDER GP
FILTER GP-TRANSMISSION
9T-4730 FILTER GP-TRANSMISSION
FILTER GP-TRANSMISSION
9T-4730 FILTER GP-TRANSMISSION
VALVE GP-RELIEF
9T-1320 VALVE GP-RELIEF
VALVE GP-RELIEF
3G-0257 VALVE GP-RELIEF
FILTER GP
3G-1856 FILTER GP
LINES GP-HYDROSTATIC
7P-7646 LINES GP-HYDROSTATIC
PUMP GP-GEAR
3G-2185 PUMP GP-GEAR
PUMP GP-GEAR
6E-1224 PUMP GP-GEAR
MOTOR GP-PISTON
3G-5014 MOTOR GP-PISTON
MOTOR GP-PISTON
3G-5014 MOTOR GP-PISTON
MOTOR GP-PISTON
3G-5014 MOTOR GP-PISTON
MOTOR GP-PISTON
3G-5014 MOTOR GP-PISTON
MOTOR GP-PISTON
3G-5014 MOTOR GP-PISTON
MOTOR GP-PISTON
3G-5014 MOTOR GP-PISTON

Truck sale:

Caterpillar 973K, track loaders, Construction
195,000 
Caterpillar 973K, track loaders, Construction
- track loaders
HOLT CAT
Caterpillar 973K, track loaders, Construction
195,000 
Caterpillar 973K, track loaders, Construction
- track loaders
HOLT CAT
Caterpillar 973K, track loaders, Construction
185,000 
Caterpillar 973K, track loaders, Construction
- track loaders
HOLT CAT
Caterpillar 973K, track loaders, Construction
399,000 
Caterpillar 973K, track loaders, Construction
- track loaders
HOLT CAT
Caterpillar 973K, track loaders, Construction
190,000 
Caterpillar 973K, track loaders, Construction
- track loaders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.