AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1V-4909 CONTROL GP-STEERING S/N 50W6041-8566 PART OF 8V-1006 OPERATOR AR 988B WHEEL LOADER


OPERATOR STATION
CONTROL GP-STEERING
CONTROL GP-TRANSMISSION

WHEEL LOADER 988B WHEEL LOADER 50W
 988B Wheel Loader 50W06041-UP (MACHINE) POWERED BY 3408 Engine SEBP1388 988B 50W   (1976)

OPERATOR STATION

CONTROL GP-STEERING
CONTROL GP-STEERING
1V-4909 CONTROL GP-STEERING
CONTROL GP-STEERING
1V-4909 CONTROL GP-STEERING
CONTROL GP-STEERING
1V-4909 CONTROL GP-STEERING
CONTROL GP-STEERING
1V-4909 CONTROL GP-STEERING
CONTROL GP-STEERING
8V-4399 CONTROL GP-STEERING
CONTROL GP-STEERING
8V-4399 CONTROL GP-STEERING
 

#SEBP13880860
 

1V-4909: CONTROL GP-STEERING

1V-4909 CONTROL GP-STEERING
S/N 50W6041-8566
PART OF 8V-1006 OPERATOR AR
i00194200 SEBP1388
1V4909 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 988B WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-6282 [1] SPINNER AS  
2. 1V-9385 [1] COVER-EMBLEM  
3. 9K-5635 [3] SCREW-TAPPING (8-18X1-IN)  
4. 032-5678 [1] STEERING WHEEL  
5. 1S-6106 [1] RING-SNAP  
6. 6K-8161 [1] BALL BEARING  
7. 5H-6480 [1] RING-RETAINING  
8. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
  3B-4506 [4] LOCKWASHER  
9. 2R-6806 [1] CONNECTOR  
10. 3J-1907 [4] SEAL-O-RING  
11. 030-7947 [3] ELBOW  
12. 2V-3219 I [1] HOSE AS (65.6CM)  
13. 3V-5648 I [1] HOSE AS  
14. 2P-1278 [4] UNION  
15. 2P-1279 [4] LOCKNUT (9/16-18-THD)  
16. 4V-6133 I [1] HOSE AS  
17. 3G-7595 CY [1] PUMP GP-METERING (HMU)  
18. 1V-6349 [1] SHAFT AS  
19. 9K-5636 [1] BALL BEARING  
20. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
  4B-4281 [1] WASHER (16.8X33X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP13880861
 

1V-4909: CONTROL GP-STEERING

1V-4909 CONTROL GP-STEERING
S/N 50W8567-8806; 50W8808-8810; 50W8814-8829; 50W8831-8833
PART OF 8V-1006 OPERATOR AR
i00194201 SEBP1388
1V4909 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 988B WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-6282 [1] SPINNER AS  
2. 1V-9385 [1] COVER-EMBLEM  
3. 9K-5635 [3] SCREW-TAPPING (8-18X1-IN)  
4. 032-5678 [1] STEERING WHEEL  
5. 1S-6106 [1] RING-SNAP  
6. 6K-8161 [1] BALL BEARING  
7. 5H-6480 [1] RING-RETAINING  
8. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
  3B-4506 [4] LOCKWASHER  
9. 2R-6806 [1] CONNECTOR  
10. 3J-1907 [4] SEAL-O-RING  
11. 030-7947 [3] ELBOW  
12. 2V-4726 CI [1] HOSE AS (63.5CM)  
13. 3V-5648 CI [2] HOSE AS  
14. 2P-1278 [4] UNION  
15. 2P-1279 [4] LOCKNUT (9/16-18-THD)  
16. 4V-6133 I [1] HOSE AS  
17. 3G-7595 Y [1] PUMP GP-METERING (HMU)  
18. 1V-6349 [1] SHAFT AS  
19. 6V-8914 C [1] BALL BEARING  
20. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
  4B-4281 [1] WASHER (16.8X33X2.5-MM THK)  
21. 6K-9194 C [1] ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP13880862
 

1V-4909: CONTROL GP-STEERING

1V-4909 CONTROL GP-STEERING
S/N 50W8807-8807; 50W8811-8813; 50W8830-8830; 50W8834-9679
PART OF 8V-1006 OPERATOR AR
i00194202 SEBP1388
1V4909 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 988B WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-6282 [1] SPINNER AS  
2. 1V-9385 [1] COVER-EMBLEM  
3. 9K-5635 [3] SCREW-TAPPING (8-18X1-IN)  
4. 032-5678 [1] STEERING WHEEL  
5. 1S-6106 [1] RING-SNAP  
6. 6K-8161 [1] BALL BEARING  
7. 5H-6480 [1] RING-RETAINING  
8. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
  8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 030-7962 C [1] ELBOW  
10. 3J-1907 [4] SEAL-O-RING  
11. 030-7947 C [4] ELBOW  
12. 2V-4726 I [1] HOSE AS  
13. 3V-5648 I [2] HOSE AS  
14. 2P-1278 [4] UNION  
15. 2P-1279 [4] LOCKNUT (9/16-18-THD)  
16. 4V-6133 I [1] HOSE AS  
17. 3G-7595 Y [1] PUMP GP-METERING (HMU)  
18. 1V-6349 [1] SHAFT AS  
19. 6V-8914 [1] BALL BEARING  
20. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
  4B-4281 [1] WASHER (16.8X33X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP13880863
 

1V-4909: CONTROL GP-STEERING

1V-4909 CONTROL GP-STEERING
S/N 50W9680-99999
PART OF 8V-1006 OPERATOR AR
i00091480 SEBP1388
1V4909 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 988B WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-6282 [1] SPINNER AS  
2. 1V-9385 [1] COVER-EMBLEM  
3. 9K-5635 [3] SCREW-TAPPING (8-18X1-IN)  
4. 032-5678 [1] STEERING WHEEL  
5. 1S-6106 [1] RING-SNAP  
6. 6K-8161 [1] BALL BEARING  
7. 5H-6480 [1] RING-RETAINING  
8. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
  8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 030-7962 C [1] ELBOW  
10. 3J-1907 [4] SEAL-O-RING  
11. 030-7947 C [4] ELBOW  
12. 2V-4726 I [1] HOSE AS  
13. 3V-5648 I [2] HOSE AS  
14. 2P-1278 [4] UNION  
15. 2P-1279 [4] LOCKNUT (9/16-18-THD)  
16. 4V-6133 I [1] HOSE AS  
17. 6E-2726 Y [1] PUMP GP-METERING (HMU)  
18. 1V-6349 [1] SHAFT AS  
19. 6V-8914 [1] BALL BEARING  
20. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
  4B-4281 [1] WASHER (16.8X33X2.5-MM THK)  
21. 3F-9559 [4] LOCKWASHER  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP13880864
 

8V-4399: CONTROL GP-STEERING

8V-4399 CONTROL GP-STEERING
S/N 50W6041-11559
PART OF 8V-0991 CHASSIS AR
i00412315 SEBP1388
8V4399 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 988B WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-9346 [1] TUBE AS  
2. 9S-1310 [2] CLIP  
3. 8T-9371 [2] BOLT (3/8-16X0.5-IN)  
4. 030-7947 [2] ELBOW  
5. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 3J-1907 [7] SEAL-O-RING  
7. 2R-6806 [4] CONNECTOR  
8. 2V-9301 I [2] HOSE AS  
9. 031-6281 [1] TEE-FLARED  
10. 2V-9347 [1] TUBE AS  
11. 5P-0419 [1] CONNECTOR-PORT  
12. 9X-8291 [2] BOLT-FLAT HEAD (1/2-13X2.75-IN)  
13. 1D-5117 [2] NUT-JAM (1/2-13-THD)  
14. 8T-9377 [6] BOLT (3/8-16X2.25-IN)  
15. 8J-1553 Y [2] VALVE GP-STEERING NEUTRALIZER  
16. 030-6816 [1] ELBOW  
17. 1J-9671 [2] SEAL-O-RING  
18. 2V-9348 [1] TUBE AS  
19. 4L-6454 [4] BOLT (3/8-16X1-IN)  
20. 1V-7944 [1] PLATE AS  
21. 2V-9302 I [1] HOSE AS  
22. 2V-7777 [1] JUNCTION BLOCK  
23. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
24. 7X-0337 [1] BOLT (1/2-13X5.75-IN)  
25. 6V-8188 [3] NUT (1/2-13-THD)  
26. 7X-0334 [2] BOLT (1/2-13X5-IN)  
27. 8J-2318 Y [1] VALVE GP-STEERING  
28. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
29. 6V-1889 [1] CLIP (LOOP)  
  5P-9298 [1] CLIP  
30. 3V-3308 [2] WASHER-HARD (10.2X20.5X2.5-MM THK)  
31. 8T-9389 C [1] BOLT (1/2-13X2.75-IN)  
  9F-4831 C [1] SPACER (13.5X38X38-MM THK)  
    -OR-
  0S-1595 [1] BOLT (1/2-13X1.25-IN)  
32. 2V-9298 I [2] HOSE AS  
33. 2V-9299 I [1] HOSE AS  
34. 3V-0778 [1] BRACKET  
35. [1] BOLT  
36. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
37. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
38. 6V-8801 [2] NUT (3/8-16-THD)  
39. 1S-1015 [1] CLIP  
40. 7K-1181 [4] STRAP-CABLE  
41. 4K-6297 [1] ELBOW  
42. 2V-9345 [1] TUBE AS  
43. 6K-3607 [1] CONNECTOR  
44. 2M-9780 [1] SEAL-O-RING  
45. 030-7947 [4] ELBOW  
46. 3J-1907 [6] SEAL-O-RING  
47. 8R-5506 [1] TUBE AS  
48. 030-7942 [1] ELBOW  
49. 8T-8917 C [3] BOLT (1/2-13X1.25-IN)  
50. 8T-4223 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
51. 1V-8976 [1] BRACKET AS  
  3R-0451 [1] BOSS (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP13880865
 

8V-4399: CONTROL GP-STEERING

8V-4399 CONTROL GP-STEERING
S/N 50W11560-99999
PART OF 8V-0991 CHASSIS AR
i00412329 SEBP1388
8V4399 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 988B WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-9346 [1] TUBE AS  
2. 9S-1310 [2] CLIP  
3. 8T-9371 [2] BOLT (3/8-16X0.5-IN)  
4. 030-7947 [6] ELBOW  
5. 8T-4896 C [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 3J-1907 [13] SEAL-O-RING  
7. 2R-6806 [4] CONNECTOR  
8. 2V-9301 I [2] HOSE AS  
9. 031-6281 [1] TEE-FLARED  
10. 2V-9347 [1] TUBE AS  
11. 5P-0419 [1] CONNECTOR-PORT  
12. 9X-8291 [2] BOLT-FLAT HEAD (1/2-13X2.75-IN)  
13. 1D-5117 [2] NUT-JAM (1/2-13-THD)  
14. 8T-9377 [6] BOLT (3/8-16X2.25-IN)  
15. 8J-1553 Y [2] VALVE GP-STEERING NEUTRALIZER  
16. 030-6816 [1] ELBOW  
17. 1J-9671 [2] SEAL-O-RING  
18. 2V-9348 [1] TUBE AS  
19. 4L-6454 [4] BOLT (3/8-16X1-IN)  
20. 1V-7944 [1] PLATE AS  
21. 2V-9302 I [1] HOSE AS  
22. 2V-7777 [1] JUNCTION BLOCK  
23. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
24. 7X-0337 [1] BOLT (1/2-13X5.75-IN)  
25. 6V-8188 [3] NUT (1/2-13-THD)  
26. 7X-0334 [2] BOLT (1/2-13X5-IN)  
27. 8J-2318 Y [1] VALVE GP-STEERING  
28. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
29. 6V-1889 [1] CLIP (LOOP)  
  124-0174 C [1] CLIP  
30. 3V-3308 [2] WASHER-HARD (10.2X20.5X2.5-MM THK)  
31. 8T-9389 [1] BOLT (1/2-13X2.75-IN)  
    -OR-
  0S-1595 [1] BOLT (1/2-13X1.25-IN)  
32. 2V-9298 I [2] HOSE AS  
33. 2V-9299 I [1] HOSE AS  
34. 3V-0778 [1] BRACKET  
35. 8S-0948 C [1] CLIP  
36. 5P-8167 C [1] BOLT (3/8-16X0.625-IN)  
37. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
38. 6V-8801 C [3] NUT (3/8-16-THD)  
39. 1S-1015 [1] CLIP  
40. 7K-1181 [4] STRAP-CABLE  
41. 4K-6297 [1] ELBOW  
42. 2V-9345 [1] TUBE AS  
43. 6K-3607 [1] CONNECTOR  
44. 2M-9780 [1] SEAL-O-RING  
45. 9B-7237 C [1] BOLT (3/8-16X1.25-IN)  
46. 9F-4831 [1] SPACER (13.5X38X38-MM THK)  
47. 8R-5506 [1] TUBE AS  
48. 030-7942 [1] ELBOW  
49. 8T-8917 [3] BOLT (1/2-13X1.25-IN)  
50. 8T-4223 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
51. 1V-8976 [1] BRACKET AS  
  3R-0451 [1] BOSS (3/8-16-THD)  
52. 8R-9137 C [1] ANGLE  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP13880866
 

1V-4911: CONTROL GP-TRANSMISSION

1V-4911 CONTROL GP-TRANSMISSION
S/N 50W6041-6598
PART OF 8V-1006 OPERATOR AR
i00194203 SEBP1388
1V4911 CONTROL GP-TRANSMISSION Parts scheme 1V4911 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 988B WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-1644 [1] SCREW (5/16-18X2.75-IN)  
2. 6K-5177 [1] HANDLE-SHIFT  
3. 1V-6347 [1] SHAFT  
4. 1V-6346 [1] COLLAR-INDICATOR  
5. 5B-9324 [1] SETSCREW  
6. 1V-6343 [1] LEVER AS  
7. 2M-2489 [1] SEAL-LIP TYPE  
8. 1V-5326 [2] BEARING  
9. 9K-6605 [1] SPACER  
10. 1V-9809 [1] RETAINER  
11. 5S-7046 [1] RING-RETAINING  
12. 2V-9009 [1] RACK  
13. 2V-3713 [1] STOP  
14. 0S-1594 [2] BOLT (3/8-16X1-IN)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
15. 010-2571 [3] SETSCREW-SOCKET (1/4-20X0.31-IN)  
16. 1V-6342 [1] GEAR AS  
  1V-5326 [1] BEARING  
17. 4V-3059 [1] BELLCRANK  
18. 1V-6350 [1] CABLE AS (SPEED)  
19. 2V-7617 [1] CABLE AS (FORWARD, REVERSE)  
20. 5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 7B-2742 [3] BOLT (1/4-20X1.25-IN)  
22. 4V-0031 [1] CLAMP  
23. 1V-6348 [1] PIN  
24. 3K-9042 [2] RING-RETAINING  
25. 9L-2685 [2] BALL JOINT AS  
26. 6F-0612 [3] NUT-JAM (1/4-28-THD)  
27. 3B-4504 [1] LOCKWASHER  
28. 4V-3058 [1] PIN  
29. 010-2570 [2] SETSCREW (1/4-20X0.375-IN)(9.53MM .375IN LONG)  
30. 2V-6076 [1] CAM  
31. 4V-0074 [1] END-YOKE  
32. 8D-5294 [2] RING  
  8D-5295 [2] PIN  
33. 2V-6078 [2] BRACKET  
34. 3V-0979 Y [1] LOCK GP-TRANSMISSION CONTROL  
35. 1H-9696 [1] SEAL-O-RING  
36. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
37. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
38. 3B-4506 [5] LOCKWASHER  
39. 1V-6341 [2] SEAL  
40. 4D-3704 [2] WASHER-HARD (17X30X5-MM THK)  
41. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
42. 6F-0612 [1] NUT-JAM (1/4-28-THD)  
43. 8B-3768 [1] ROD END  
44. 4F-7952 [2] SEAL-O-RING  
45. 1T-0765 [2] BOLT (3/8-16X1-IN)  
46. 4D-7794 [1] CLIP  
47. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
48. 1B-4330 C [3] NUT (1/4-20-THD)  
  1H-3338 C [3] LOCKWASHER (EXTERNAL TOOTH)  
49. 1B-7904 C [2] SPACER (6.8X10X9.5-MM THK)  
50. 0S-1615 C [1] BOLT (1/4-20X0.75-IN)  
51. 2V-3216 C [2] CLIP  
52. 2V-3222 C [1] RETAINER  
53. 2V-3215 C [1] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13880867
 

1V-4911: CONTROL GP-TRANSMISSION

1V-4911 CONTROL GP-TRANSMISSION
S/N 50W6599-8151
PART OF 8V-1006 OPERATOR AR
i00194204 SEBP1388
1V4911 CONTROL GP-TRANSMISSION Parts scheme 1V4911 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 988B WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-1644 [1] SCREW (5/16-18X2.75-IN)  
2. 6K-5177 [1] HANDLE-SHIFT  
3. 1V-6347 [1] SHAFT  
4. 1V-6346 [1] COLLAR-INDICATOR  
5. 5B-9324 [1] SETSCREW  
6. 1V-6343 [1] LEVER AS  
7. 2M-2489 [1] SEAL-LIP TYPE  
8. 1V-5326 [2] BEARING  
9. 9K-6605 [1] SPACER  
10. 1V-9809 [1] RETAINER  
11. 5S-7046 [1] RING-RETAINING  
12. 2V-9009 [1] RACK  
13. 2V-3713 [1] STOP  
14. 0S-1594 [2] BOLT (3/8-16X1-IN)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
15. 010-2571 [3] SETSCREW-SOCKET (1/4-20X0.31-IN)  
16. 1V-6342 [1] GEAR AS  
  1V-5326 [1] BEARING  
17. 4V-3059 [1] BELLCRANK  
18. 1V-6350 [1] CABLE AS (SPEED)  
19. 2V-7617 [1] CABLE AS (FORWARD, REVERSE)  
20. 5P-0537 C [3] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 7B-2742 [3] BOLT (1/4-20X1.25-IN)  
22. 4V-0031 [1] CLAMP  
23. 1V-6348 [1] PIN  
24. 3K-9042 [2] RING-RETAINING  
25. 9L-2685 [2] BALL JOINT AS  
26. 1B-4201 C [2] NUT-FULL (1/4-28-THD)  
27. 4V-3058 [1] PIN  
28. 010-2570 [2] SETSCREW (1/4-20X0.375-IN)  
29. 5S-9607 [1] LOCKNUT  
30. 2V-6076 [1] CAM  
31. 4V-0074 [1] END-YOKE  
32. 8D-5294 [2] RING  
  8D-5295 [2] PIN  
33. 2V-6078 C [1] BRACKET  
34. 3V-0979 Y [1] LOCK GP-TRANSMISSION CONTROL  
35. 1H-9696 [1] SEAL-O-RING  
36. 5V-8377 C [1] BRACKET  
37. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
38. 5M-2894 C [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
39. 1V-6341 [2] SEAL  
40. 5P-8247 C [2] WASHER-HARD (17X32X3.5-MM THK)  
41. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
42. 1B-4201 C [1] NUT-FULL (1/4-28-THD)  
43. 8B-3768 [1] ROD END  
44. 4F-7952 [2] SEAL-O-RING  
45. 1T-0765 [2] BOLT (3/8-16X1-IN)  
46. 4D-7794 [1] CLIP  
47. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
48. 1B-4330 [3] NUT (1/4-20-THD)  
  1H-3338 [3] LOCKWASHER (EXTERNAL TOOTH)  
49. 1B-7904 [2] SPACER (6.8X10X9.5-MM THK)  
50. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
51. 2V-3216 [2] CLIP  
52. 2V-3222 C [1] RETAINER  
53. 2V-3215 [1] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13880868
 

1V-4911: CONTROL GP-TRANSMISSION

1V-4911 CONTROL GP-TRANSMISSION
S/N 50W8152-8312
PART OF 8V-1006 OPERATOR AR
i00194206 SEBP1388
1V4911 CONTROL GP-TRANSMISSION Parts scheme 1V4911 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 988B WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-1644 [1] SCREW (5/16-18X2.75-IN)  
2. 6K-5177 [1] HANDLE-SHIFT  
3. 1V-6347 [1] SHAFT  
4. 1V-6346 [1] COLLAR-INDICATOR  
5. 5B-9324 [1] SETSCREW  
6. 1V-6343 [1] LEVER AS  
7. 2M-2489 [1] SEAL-LIP TYPE  
8. 1V-5326 [2] BEARING  
9. 9K-6605 [1] SPACER  
10. 1V-9809 [1] RETAINER  
11. 5S-7046 [1] RING-RETAINING  
12. 2V-9009 [1] RACK  
13. 2V-3713 [1] STOP  
14. 0S-1594 [2] BOLT (3/8-16X1-IN)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
15. 010-2571 [3] SETSCREW-SOCKET (1/4-20X0.31-IN)  
16. 1V-6342 [1] GEAR AS  
  1V-5326 [1] BEARING  
17. 4V-3059 [1] BELLCRANK  
18. 1V-6350 [1] CABLE AS (SPEED)  
19. 8T-9614 C [1] CABLE AS (FORWARD, REVERSE)  
20. 5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 7B-2742 [3] BOLT (1/4-20X1.25-IN)  
22. 4V-0031 [1] CLAMP  
23. 1V-6348 [1] PIN  
24. 3K-9042 [2] RING-RETAINING  
25. 9L-2685 [2] BALL JOINT AS  
26. 1B-4201 C [2] NUT-FULL (1/4-28-THD)  
27. 4V-3058 [1] PIN  
28. 010-2570 [2] SETSCREW (1/4-20X0.375-IN)(9.53MM(.375 IN.)LONG)  
29. 5S-9607 [1] LOCKNUT  
30. 9S-1354 C [1] NUT (5/8-18-THD)  
31. 6W-0639 CY [1] NEUTRALIZER GP-TRANSMISSION  
32. 8D-5294 C [1] RING  
  8D-5295 C [1] PIN  
33. 2V-3215 [1] SEAL  
34. [1] RETAINER  
35. 2V-3216 [2] CLIP  
36. 5V-8377 [1] BRACKET  
37. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
38. 5M-2894 C [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
39. 1V-6341 [2] SEAL  
40. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
41. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
42. 1B-4201 C [2] NUT-FULL (1/4-28-THD)  
43. 8B-3768 [1] ROD END  
44. 8T-7320 C [1] SEAL (44.92-MM ID)  
45. 1B-7904 [2] SPACER (6.8X10X9.5-MM THK)  
46. 4D-7794 [1] CLIP  
47. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
48. 1B-4330 [3] NUT (1/4-20-THD)  
  1H-3338 [3] LOCKWASHER (EXTERNAL TOOTH)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13880869
 

1V-4911: CONTROL GP-TRANSMISSION

1V-4911 CONTROL GP-TRANSMISSION
S/N 50W8313-9536; 50W9538-9538; 50W9540-9544; 50W9546-9548; 50W9550-9550; 50W9553-9553; 50W9563-9563; 50W9569-9570; 50W9573-9573
PART OF 8V-1006 OPERATOR AR
i00194205 SEBP1388
1V4911 CONTROL GP-TRANSMISSION Parts scheme 1V4911 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 988B WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-1644 [1] SCREW (5/16-18X2.75-IN)  
2. 6K-5177 [1] HANDLE-SHIFT  
3. 1V-6347 [1] SHAFT  
4. 1V-6346 [1] COLLAR-INDICATOR  
5. 8T-5069 C [1] SETSCREW-SOCKET (10-24X0.25-IN)  
6. 6W-5795 C [1] LEVER AS  
7. 2M-2489 [1] SEAL-LIP TYPE  
8. 1V-5326 [2] BEARING  
9. 9K-6605 [1] SPACER  
10. 1V-9809 [1] RETAINER  
11. 5S-7046 [1] RING-RETAINING  
12. 6W-5546 C [1] RACK  
13. 2V-3713 [1] STOP  
14. 0S-1594 [2] BOLT (3/8-16X1-IN)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
15. 010-2571 [3] SETSCREW-SOCKET (1/4-20X0.31-IN)  
16. 1V-6342 [1] GEAR AS  
  1V-5326 [1] BEARING  
17. 4V-3059 [1] BELLCRANK  
18. 1V-6350 [1] CABLE AS (SPEED)  
19. 8T-9614 [1] CABLE AS (FORWARD, REVERSE)  
20. 5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 7B-2742 [3] BOLT (1/4-20X1.25-IN)  
22. 4V-0031 [1] CLAMP  
23. 1V-6348 [1] PIN  
24. 3K-9042 [2] RING-RETAINING  
25. 9L-2685 [2] BALL JOINT AS  
26. 1B-4201 [2] NUT-FULL (1/4-28-THD)  
27. 4V-3058 [1] PIN  
28. 010-2570 [2] SETSCREW (1/4-20X0.375-IN)  
29. 5S-9607 [1] LOCKNUT  
30. 6W-5796 C [1] ADAPTER  
31. 9S-1354 [1] NUT (5/8-18-THD)  
32. 6W-0639 Y [1] NEUTRALIZER GP-TRANSMISSION  
33. 8D-5294 [1] RING  
  8D-5295 [1] PIN  
34. 2V-3215 [1] SEAL  
35. [1] RETAINER  
36. 2V-3216 [2] CLIP  
37. 5V-8377 [1] BRACKET  
38. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
39. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
40. 1V-6341 [2] SEAL  
41. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
42. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
43. 1B-4201 [2] NUT-FULL (1/4-28-THD)  
44. 8B-3768 [1] ROD END  
45. 8T-7320 [1] SEAL (44.92-MM ID)  
46. 1B-7904 [2] SPACER (6.8X10X9.5-MM THK)  
47. 4D-7794 [1] CLIP  
48. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
49. 1B-4330 [3] NUT (1/4-20-THD)  
  1H-3338 [3] LOCKWASHER (EXTERNAL TOOTH)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 988B :

CONTROL GP-PILOT OPERATED HYD
8R-0610 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-PILOT OPERATED HYD
8R-0610 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-HYDRAULIC HAND
8R-0612 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
8R-0612 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
7V-7663 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
7V-0009 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
7V-0009 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
1V-4893 CONTROL GP-HYDRAULIC HAND
CONTROL GP-STEERING
1V-4909 CONTROL GP-STEERING
CONTROL GP-STEERING
1V-4909 CONTROL GP-STEERING
CONTROL GP-STEERING
1V-4909 CONTROL GP-STEERING
CONTROL GP-STEERING
8V-4399 CONTROL GP-STEERING
CONTROL GP-STEERING
8V-4399 CONTROL GP-STEERING
CONTROL GP-TRANSMISSION
1V-4911 CONTROL GP-TRANSMISSION
CONTROL GP-TRANSMISSION
1V-4911 CONTROL GP-TRANSMISSION
CONTROL GP-TRANSMISSION
1V-4911 CONTROL GP-TRANSMISSION

Truck sale:

Caterpillar 988B
 
Caterpillar 988B
- Wheel Loaders
N C MACHINERY CO.
Caterpillar 988B, Wheel Loaders, Construction
47,951 
Caterpillar 988B, Wheel Loaders, Construction
- Wheel loaders
TOROMONT CAT
Caterpillar 988B, Wheel Loaders, Construction
 
Caterpillar 988B, Wheel Loaders, Construction
- Wheel loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 988B, Wheel Loaders, Construction
63,246 
Caterpillar 988B, Wheel Loaders, Construction
- Wheel loaders

Caterpillar 988B, Wheel Loaders, Construction
 
Caterpillar 988B, Wheel Loaders, Construction
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Italy
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.