AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3516 GENERATOR SET ENGINE 25Z00001-00683 ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



GEN SET ENGINE 3516 GEN SET ENGINE 25Z
 3516 GENERATOR SET ENGINE 25Z00001-00683 SEBP1390 3516 25Z   (1982)

Parts group 3516:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALARM GP
ALARM GP
2W-4476 ALARM GP
2W4476 ALARM GROUP
AN ATTACHMENT
ALARM GP
2W-5421 ALARM GP
2W5421 ALARM GROUP
AN ATTACHMENT
ALTERNATOR GP-CHARGING
MOUNTING GP-ALTERNATOR
7N-7980 MOUNTING GP-ALTERNATOR
7N7980 ALTERNATOR MOUNTING GROUP-R.H. MOUNTED
REPLACED BY 1W5048-PAGE 252.01
REFER TO 8N7500 CHART-PAGE 30
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
1W-5048 MOUNTING GP-ALTERNATOR
1W5048 ALTERNATOR MOUNTING GROUP
AN ATTACHMENT
4W-6085 ALTERNATOR GP-CHARGING
4W6085 ALTERNATOR GROUP-24 VOLT, 35 AMPERE
FOR USE WITH 1W5048-PAGE 252.01
AN ATTACHMENT
6N-9294 ALTERNATOR GP-CHARGING
6N9294 ALTERNATOR GROUP-24 VOLT, 35 AMPERE*R
PART OF 4W6085 ALTERNATOR
AN ATTACHMENT
7N-7986 ALTERNATOR GP-CHARGING
7N7986 ALTERNATOR GROUP-32 VOLT, 60 AMPERE-R.H. MOUNTED
AN ATTACHMENT
7N-7981 ALTERNATOR GP-CHARGING
7N7981 ALTERNATOR GROUP-24 VOLT, 60 AMPERE-R.H. MOUNTED
AN ATTACHMENT
ALTERNATOR GP-CHARGING
4N-3986 ALTERNATOR GP-CHARGING
4N3986 ALTERNATOR GROUP-24 VOLT, 60 AMPERE-SIDE VIEW-PART 1*R
PART OF 7N7981 ALTERNATOR GROUP LISTED ON PAGE 253. AN ATTACHMENT
ALTERNATOR GP-CHARGING
4N-3986 ALTERNATOR GP-CHARGING
4N3986 ALTERNATOR GROUP-24 VOLT, 60 AMPERE-END VIEW-PART 2*R
PART OF 7N7981 ALTERNATOR GROUP LISTED ON PAGE 253. AN ATTACHMENT
ALTERNATOR GP-CHARGING
4N-3987 ALTERNATOR GP-CHARGING
4N3987 ALTERNATOR GROUP-32 VOLT, 60 AMPERE-SIDE VIEW-PART 1*R
PART OF 7N7986 ALTERNATOR GROUP LISTED ON PAGE 253. AN ATTACHMENT
ALTERNATOR GP-CHARGING
4N-3987 ALTERNATOR GP-CHARGING
4N3987 ALTERNATOR GROUP-32 VOLT, 60 AMPERE-END VIEW-PART 2*R
PART OF 7N7986 ALTERNATOR GROUP LISTED ON PAGE 253. AN ATTACHMENT
ALTERNATOR GP-CHARGING
3T-6352 ALTERNATOR GP-CHARGING
3T6352 ALTERNATOR GROUP-DELCO-REMY-24 VOLT, 35 AMPERE-PART 1 OF 2
PART OF 6N9294 ALTERNATOR
AN ATTACHMENT
ALTERNATOR GP-CHARGING
3T-6352 ALTERNATOR GP-CHARGING
3T6352 ALTERNATOR GROUP-DELCO-REMY-24 VOLT, 35 AMPERE-PART 2 OF 2
PART OF 6N9294 ALTERNATOR
AN ATTACHMENT
ALTERNATOR GP-CHARGING
7N-9720 ALTERNATOR GP-CHARGING
7N9720 ALTERNATOR GROUP-24 VOLT, 35 AMPERE
PART OF 6N9294 ALTERNATOR
AN ATTACHMENT
ALTERNATOR GP-CHARGING
9G-4574 ALTERNATOR GP-CHARGING
9G4574 ALTERNATOR GROUP - NIPPONDENSO
PART OF 6N9294 ALTERNATOR
AN ATTACHMENT
BATTERY GP
BATTERY GP
3N-4653 BATTERY GP
3N4653 BATTERY GROUP-24 VOLT, 300 AMPERE HOURS
AN ATTACHMENT
BATTERY GP
1H-1342 BATTERY GP
1H1342 BATTERY GROUP-30 VOLT, 204 AMPERE HOURS
AN ATTACHMENT
BATTERY GP
7L-7872 BATTERY GP
7L7872 BATTERY GROUP-24 VOLT, 220 AMPERE
FOR USE BETWEEN -20 DEGREES & 0 DEGREES FAHRENHEIT TEMPERATURES
AN ATTACHMENT
BATTERY GP
3N-4654 BATTERY GP
3N4654 BATTERY GROUP-30 VOLT, 300 AMPERE HOURS
AN ATTACHMENT
BATTERY GP
7L-7871 BATTERY GP
7L7871 BATTERY GROUP-24 VOLT,172 AMPERE
FOR USE IN 60 DEGREES & ABOVE FAHRENHEIT TEMPERATURE
AN ATTACHMENT
SUPPORT GP-BATTERY
3N-7056 SUPPORT GP-BATTERY
3N7056 BATTERY SUPPORT GROUP
AN ATTACHMENT
BATTERY CHARGERS
BATTERY CHARGERS
AN ATTACHMENT
BOX GP
FASTENER GP-JUNCTION BOX
7W-6956 FASTENER GP-JUNCTION BOX
7W6956 FASTENER GROUP - JUNCTION BOX
ENGINE SERIAL NO. 25Z678-UP
PART OF 7W8911 ELECTRICAL SHUT-OFF
JUNCTION BOX GP
5N-8513 JUNCTION BOX GP
5N8513 JUNCTION BOX GROUP
SERIAL NO. 25Z1 TO 25Z430 INCLUSIVE
PART OF 2W6121 & 2W6123 ELECTRICAL SHUT-OFF GROUPS LISTED ON PAGES 280A
AND 281. 5N2026 SWITCH AND 5N8511 HARNESS PARTS ARE SHOWN ON PAGES 282,
284 AND 285
JUNCTION BOX GP
4W-2635 JUNCTION BOX GP
4W2635 JUNCTION BOX GROUP-TYPE 1
SERIAL NO. 25Z432-UP
4W2636-PAGE 283C
PART OF 2W6121 & 2W6123 ELECTRICAL SHUT-OFFS
JUNCTION BOX GP
4W-2635 JUNCTION BOX GP
4W2635 JUNCTION BOX GROUP-TYPE 2
SERIAL NO. 25Z432-UP
PART OF 2W6121 & 2W6123 ELECTRICAL SHUT-OFFS
JUNCTION BOX GP
7W-6794 JUNCTION BOX GP
7W6794 JUNCTION BOX GROUP
ENGINE SERIAL NO. 25Z678-UP
PART OF 7W6954 ELECTRICAL SHUT-OFF
MOUNTING GP-JUNCTION BOX
7W-6955 MOUNTING GP-JUNCTION BOX
7W6955 MOUNTING GROUP - JUNCTION BOX
ENGINE SERIAL NO. 25Z678-UP
PART OF 7W6954 ELECTRICAL SHUT-OFF
CONTACTOR GP
CONTACTOR AS
7W-0704 CONTACTOR AS
7W0704 WATER TEMPERATURE CONTACTOR ASSEMBLY
REFER TO 7W1450 CHART-PAGE 226
AN ATTACHMENT
8N-8542 CONTACTOR GP
8N8542 INLET MANIFOLD TEMPERATURE CONTACTOR GROUP
AN ATTACHMENT
4W-2768 CONTACTOR GP
4W2768 CONTACTOR GROUP - SHUTOFF
AN ATTACHMENT
4W-2767 CONTACTOR GP-ALARM
4W2767 CONTACTOR GROUP - ALARM
AN ATTACHMENT
CONTACTOR GP
7W-7632 CONTACTOR GP
7W7632 CONTACTOR GROUP
ENGINE SERIAL NO. 25Z678-UP
PART OF 7W8911 ELECTRICAL SHUT-OFF
MOUNTING GP-CONTACTOR
2W-6251 MOUNTING GP-CONTACTOR
2W6251 CONTACTOR MOUNTING GROUP-JUNCTION BOX
SERIAL NO. 25Z1 TO 25Z431 INCLUSIVE
PART OF 2W6123 ELECTRICAL SHUT-OFF GROUP LISTED ON PAGE 281
MOUNTING GP-CONTACTOR
2W-6251 MOUNTING GP-CONTACTOR
2W6251 MOUNTING GP-CONTACTOR
JUNCTION BOX- S/N 25Z432-532
PART OF 2W6121 AND 2W6123 SHUT-OFFS
MOUNTING GP-CONTACTOR
2W-6251 MOUNTING GP-CONTACTOR
2W6251 MOUNTING GP-CONTACTOR
JUNCTION BOX-S/N 25Z533-UP
PART OF 2W6121 & 2W6123 SHUT-OFFS
MOUNTING GP-CONTACTOR
4W-2644 MOUNTING GP-CONTACTOR
4W2644 CONTACTOR MOUNTING GROUP-ALARM
AN ATTACHMENT
MOUNTING GP-CONTACTOR
4W-2643 MOUNTING GP-CONTACTOR
4W2643 CONTACTOR MOUNTING GROUP-SHUT-OFF
AN ATTACHMENT
CONVERTER GP-ELECTRICAL
CONVERTER GP-ELECTRICAL
2W-4523 CONVERTER GP-ELECTRICAL
2W4523 ELECTRICAL CONVERTER GROUP
FOR USE WITH 3161 MOTOR SPEED CONTROL
AN ATTACHMENT
ENCLOSURE GP
ENCLOSURE GP
5N-8878 ENCLOSURE GP
5N8878 ENCLOSURE GROUP-CONTACTOR-TYPE 2
PART OF 4W4751 ENGINE WIRING
AN ATTACHMENT
ENCLOSURE GP
5N-8878 ENCLOSURE GP
5N8878 ENCLOSURE GROUP-CONTACTOR-TYPE 1
PART OF 4W4751 ENGINE WIRING
AN ATTACHMENT
SENSOR GP
GAUGE GP-WATER LEVEL
8N-6154 GAUGE GP-WATER LEVEL
8N6154 WATER LEVEL GAUGE GROUP-TYPE 1
FOR USE WITH D SIZE RADIATOR
CANNOT BE USED WITH MARINE AUXILIARY ENGINE ARRANGEMENT
AN ATTACHMENT
GAUGE GP-WATER LEVEL
7N-4885 GAUGE GP-WATER LEVEL
7N4885 WATER LEVEL GAUGE GROUP-TYPE 1
FOR USE WITH EXPANSION TANK
ALSO AN ATTACHMENT
GAUGE GP-WATER LEVEL
8N-6154 GAUGE GP-WATER LEVEL
8N6154 WATER LEVEL GAUGE GROUP-TYPE 2
FOR USE WITH D SIZE RADIATOR
CANNOT BE USED WITH MARINE AUXILIARY ENGINE ARRANGEMENT
AN ATTACHMENT
GAUGE GP-WATER LEVEL
7N-4885 GAUGE GP-WATER LEVEL
7N4885 WATER LEVEL GAUGE GROUP
SERIAL NO. 25Z598-UP
FOR USE WITH EXPANSION TANK
ALSO AN ATTACHMENT
GAUGE GP-WATER LEVEL
8N-9087 GAUGE GP-WATER LEVEL
8N9087 WATER LEVEL GAUGE GROUP-TYPE 1
FOR USE WITH E, F, G & H SIZE RADIATORS
CANNOT BE USE WITH MARINE AUXILIARY ENGINE ARRANGEMENTS
AN ATTACHMENT
GAUGE GP-WATER LEVEL
8N-9087 GAUGE GP-WATER LEVEL
8N9087 WATER LEVEL GAUGE GROUP-TYPE 2
FOR USE WITH E, F, G & H SIZE RADIATORS
CANNOT BE USED WITH MARINE AUXILIARY ENGINES
AN ATTACHMENT
MAGNETIC PICKUP GP
8N-4925 MAGNETIC PICKUP GP
8N4925 MAGNETIC PICK-UP GROUP
CANNOT BE USED WITH 2500 GOVERNOR
AN ATTACHMENT
MAGNETIC PICKUP GP
7W-3355 MAGNETIC PICKUP GP
7W3355 MAGNETIC PICKUP GROUP
PART OF 7W8911 ELECTRICAL SHUT-OFF
ALSO AN ATTACHMENT
SHUTOFF GP
SHUTOFF GP-AIR
2W-6115 SHUTOFF GP-AIR
2W6115 AIR SHUT-OFF GROUP-INTAKE
SERIAL NO. 25Z1 TO 25Z616 INCLUSIVE
2W5216-PAGE 172
SHUTOFF GP-AIR
2W-6115 SHUTOFF GP-AIR
2W6115 AIR SHUT-OFF GROUP
SERIAL NO. 25Z617-UP
2W5216-PAGE 172
SHUTOFF GP-AIR
2W-5216 SHUTOFF GP-AIR
2W5216 AIR SHUT-OFF GROUP
SERIAL NO. 25Z1 TO 25Z430 INCLUSIVE
PART OF 2W6115 AIR SHUT-OFF GROUP SHOWN ON PAGE 171B
SHUTOFF GP-AIR
2W-5216 SHUTOFF GP-AIR
2W5216 AIR SHUT-OFF GROUP
SERIAL NO. 25Z431 TO 25Z532 INCLUSIVE
PART OF 2W6115 AIR SHUT-OFF
SHUTOFF GP-AIR
2W-5216 SHUTOFF GP-AIR
2W5216 AIR SHUT-OFF GROUP
SERIAL NO. 25Z533-UP
PART OF 2W6115 AIR SHUT-OFF
SHUTOFF GP-REMOTE
1W-4862 SHUTOFF GP-REMOTE
1W4862 REMOTE SHUT-OFF GROUP-HYDRAULIC-PNEUMATIC
FOR USE WITH 3161 GOVERNORS. ALSO PART OF 2W8584 WOODWARD GOVERNOR
AN ATTACHMENT
CHART-REMOTE SHUTOFF
5N-8200 CHART-REMOTE SHUTOFF
5N8200 REMOTE NORMAL SHUT-OFF CHART-TYPE 1
AN ATTACHMENT
CHART-REMOTE SHUTOFF
5N-8200 CHART-REMOTE SHUTOFF
5N8200 REMOTE NORMAL SHUT-OFF CHART-TYPE 2
AN ATTACHMENT
SOLENOID GP-SHUTOFF
7W-6957 SOLENOID GP-SHUTOFF
7W6957 SHUT-OFF SOLENOID GROUP-AIR-24-32 VOLT
ENGINE SERIAL NO. 25Z678-UP
PART OF 7W8911 ELECTRICAL SHUT-OFF
SHUTOFF GP-REMOTE
5N-5880 SHUTOFF GP-REMOTE
5N5880 EMERGENCY REMOTE SHUT-OFF GROUP
PNEUMATIC/HYDRAULIC FUEL AND AIR
AN ATTACHMENT
2W-6121 SHUTOFF GP-ELECTRICAL
2W6121 ELECTRICAL SHUT-OFF GROUP-24-32 VOLT-OVERSPEED ONLY
CANNOT BE USED WITH UG8L GOVERNOR
AN ATTACHMENT
SHUTOFF GP-ELECTRICAL
1W-4863 SHUTOFF GP-ELECTRICAL
1W4863 ELECTRICAL SHUT-OFF GROUP-24/32 VOLT DC
FOR USE WITH 3161 GOVERNORS
AN ATTACHMENT
SHUTOFF GP-ELECTRICAL
7W-3610 SHUTOFF GP-ELECTRICAL
7W3610 ELECTRICAL SHUT-OFF GROUP - 24 OR 32 VOLT
AN ATTACHMENT
SHUTOFF GP-AIR
1W-1270 SHUTOFF GP-AIR
1W1270 AIR SHUT-OFF GROUP-MECHANICAL
REFER TO CHART SHOWN ON PAGE 287 FOR USAGE
AN ATTACHMENT
2W-6123 SHUTOFF GP-ELECTRICAL
2W6123 ELECTRICAL SHUT-OFF GROUP-24-32 VOLT
ENGINE SERIAL NO. 25Z1 TO 25Z677 INCLUSIVE
CANNOT BE USED WITH UG8L GOVERNOR
7W-6954 SHUTOFF GP-ELECTRICAL
7W6954 SHUT-OFF GROUP--ELECTRICAL
ENGINE SERIAL NO. 25Z678-UP
PART OF 7W8911 ELECTRICAL SHUT-OFF
7W-8911 SHUTOFF GP-ELECTRICAL
7W8911 SHUT-OFF GROUP - ELECTRICAL
ENGINE SERIAL NO. 25Z678-UP
SHUTOFF GP-CONTROL
5N-1960 SHUTOFF GP-CONTROL
5N1960 CONTROL SHUT-OFF GROUP-SIDE VIEW-PART 1
5N1925 PUMP, 5N5990 AND 5N2718 VALVE PARTS ARE SHOWN ON PAGES 296, 297 &
298. REFER TO CHART SHOWN ON PAGE 287 FOR USAGE. AN ATTACHMENT
SHUTOFF GP-CONTROL
5N-1960 SHUTOFF GP-CONTROL
5N1960 CONTROL SHUT-OFF GROUP-TOP VIEW-PART 2
5N6443 VALVE PARTS ARE SHOWN ON PAGE 298. REFER TO CHART SHOWN ON PAGE 287
FOR USAGE. AN ATTACHMENT
SHUTOFF GP-CONTROL
5N-5330 SHUTOFF GP-CONTROL
5N5330 CONTROL SHUT-OFF GROUP-SIDE VIEW-PART 1
5N1925 PUMP, 5N5990 AND 5N2718 VALVE PARTS ARE SHOWN ON PAGES 296, 297 &
298. REFER TO CHART SHOWN ON PAGE 287 FOR USAGE. AN ATTACHMENT
SHUTOFF GP-CONTROL
5N-5330 SHUTOFF GP-CONTROL
5N5330 CONTROL SHUT-OFF GROUP-TOP VIEW-PART 2
5N6443 VALVE PARTS ARE SHOWN ON PAGE 298. REFER TO CHART SHOWN ON PAGES
287 FOR USAGE. AN ATTACHMENT
SHUTOFF GP-CONTROL
5N-5608 SHUTOFF GP-CONTROL
5N5608 CONTROL SHUT-OFF GROUP-SIDE VIEW-PART 1
5N1925 PUMP, 5N5990 AND 5N2718 VALVE PARTS ARE SHOWN ON PAGES 296, 297 &
298. REFER TO CHART SHOWN ON PAGE 287 FOR USAGE. AN ATTACHMENT
SHUTOFF GP-CONTROL
5N-5608 SHUTOFF GP-CONTROL
5N5608 CONTROL SHUT-OFF GROUP-TOP VIEW-PART 2
5N6443 VALVE PARTS ARE SHOWN ON PAGE 298. REFER TO CHART SHOWN ON PAGE 287
FOR USAGE. AN ATTACHMENT
SHUTOFF GP-CONTROL
5N-5338 SHUTOFF GP-CONTROL
5N5338 CONTROL SHUT-OFF GROUP-SIDE VIEW-PART 1
5N1925 PUMP, 5N5990 AND 5N2718 VALVE PARTS ARE SHOWN ON PAGES 296, 297 &
298. REFER TO CHART SHOWN ON PAGE 287 FOR USAGE. AN ATTACHMENT
SHUTOFF GP-CONTROL
5N-5338 SHUTOFF GP-CONTROL
5N5338 CONTROL SHUT-OFF GROUP-TOP VIEW-PART 2
5N6443 VALVE PARTS ARE SHOWN ON PAGE 298. REFER TO CHART SHOWN ON PAGE 287
FOR USAGE. AN ATTACHMENT
2W-4922 LINES GP-SHUTOFF
2W4922 SHUT-OFF LINES GP-HYDRO-MECHANICAL
FOR USE WITH 2W8947 WIRING
AN ATTACHMENT
LINES GP-SHUTOFF
5N-9570 LINES GP-SHUTOFF
5N9570 MECHANICAL SHUT-OFF LINES GROUP-REPLACED BY 2W6243-PAGE 300A
2W4923-PAGE 302-2W4926-PAGE 309B
REFER TO CHART SHOWN ON PAGE 287 FOR USAGE. AN ATTACHMENT
LINES GP-SHUTOFF
2W-6243 LINES GP-SHUTOFF
2W6243 SHUT-OFF LINES GROUP-MECHANICAL
2W6108-PAGE 305, 2W4926-PAGE 309B
FOR USE WITH ELECTRIC GOVERNOR
AN ATTACHMENT
LINES GP-SHUTOFF
2W-6244 LINES GP-SHUTOFF
2W6244 SHUT-OFF LINES GROUP
FOR USE WITH R.H. HYDRA-MECHANICAL GOVERNOR WITH OVERSPEED AND FOR USE
WITH 1W4862 REMOTE SHUT-OFF GROUP SHOWN ON PAGE 277. 2W6108 AND 2W4927
LINES PARTS ARE SHOWN ON PAGES 304 AND 308. AN ATTACHMENT
LINES GP-SHUTOFF
2W-4923 LINES GP-SHUTOFF
2W4923 AIR SHUT-OFF LINES GROUP
PART OF 5N9570 AND 5N6090 MECHANICAL SHUT-OFF LINES GROUP SHOWN ON PAGES
300 AND 306. AN ATTACHMENT
LINES GP-SHUTOFF
5N-5735 LINES GP-SHUTOFF
5N5735 SHUT-OFF LINES GROUP-TYPE 2
REFER TO 5N5382 CHART-PAGE 287
AN ATTACHMENT
LINES GP-SHUTOFF
5N-5735 LINES GP-SHUTOFF
5N5735 SHUT-OFF LINES GROUP-TYPE 1
REFER TO 5N5382 CHART-PAGE 287
AN ATTACHMENT
LINES GP-SHUTOFF
2W-6108 LINES GP-SHUTOFF
2W6108 AIR SHUT-OFF LINES GROUP-TYPE 1
PART OF 2W6244, 2W6242 & 2W4922 SHUT-OFF LINES
AN ATTACHMENT
LINES GP-SHUTOFF
2W-6108 LINES GP-SHUTOFF
2W6108 AIR SHUT-OFF LINES GROUP-R.H.-TYPE 2
PART OF 2W6244, 2W6242, 2W4922 & 2W6243 SHUT-OFF LINES
AN ATTACHMENT
LINES GP-SHUTOFF
5N-6090 LINES GP-SHUTOFF
5N6090 MECHANICAL SHUT-OFF LINES GROUP
REPLACED BY 2W6242-PAGE 307
2W4923-PAGE 302, 2W4925-PAGE 309A
REFER TO 5N5382 CHART-PAGE 287. AN ATTACHMENT
LINES GP-SHUTOFF
2W-6242 LINES GP-SHUTOFF
2W6242 SHUT-OFF LINES GROUP
FOR USE WITH R.H. HYDRA-MECHANICAL GOVERNOR AND 1W4862 REMOTE SHUT-OFF
GROUP SHOWN ON PAGE 277. 2W6108 SHUT-OFF AND 2W4925 VALVE PARTS ARE SHOWN
ON PAGES 304 AND 309A. AN ATTACHMENT
SOLENOID GP
SOLENOID AS
3T-3421 SOLENOID AS
3T3421 SOLENOID ASSEMBLY
PART OF 3T2785, 3T8953, 3T2780, 3T8949 & 6T640 ELECTRIC STARTING MOTOR
GROUP SHOWN ON PAGES 236, 241G, 242, 242B & 244E
SOLENOID AS
3T-5051 SOLENOID AS
3T5051 SOLENOID ASSEMBLY-32 VOLT
PART OF 3T2773, 3T8943, 3T2779 & 3T8948 ELECTRIC STARTING MOTOR GROUPS
SHOWN ON PAGES 239, 241A, 245 AND 247B
SOLENOID GP-SHUTOFF
7W-6957 SOLENOID GP-SHUTOFF
7W6957 SHUT-OFF SOLENOID GROUP-AIR-24-32 VOLT
ENGINE SERIAL NO. 25Z678-UP
PART OF 7W8911 ELECTRICAL SHUT-OFF
STARTING AID GP
STARTING AID GP-ETHER
8N-6414 STARTING AID GP-ETHER
8N6414 ETHER STARTING AID GROUP-24 VOLT
NOTE: 7N296 ETHER CYLINDER IS USED AND MUST BE PURCHASED SEPARATELY FROM
YOUR CATERPILLAR DEALER. AN ATTACHMENT
STARTING MOTOR GP
LUBRICATOR GP-AIR MOTOR
7W-0522 LUBRICATOR GP-AIR MOTOR
7W0522 AIR MOTOR LUBRICATOR GROUP
PART OF 5N8354 AIR LINES GROUP
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
8N-3896 STARTING MOTOR GP-ELECTRIC
8N3896 ELECTRIC STARTING MOTOR GROUP-DUAL-24 VOLT DC-TYPE 1
3T2785 MOTOR PARTS ARE SHOWN ON PAGES 236, 237 AND 238. AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
8N-3896 STARTING MOTOR GP-ELECTRIC
8N3896 ELECTRIC STARTING MOTOR GROUP-DUAL-24 VOLT DC-TYPE 2
6T647 MOTOR PARTS ARE LISTED ON PAGE 241D
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
8N-3897 STARTING MOTOR GP-ELECTRIC
8N3897 ELECTRIC STARTING MOTOR GROUP-DUAL-32 VOLT DC-L.H.-TYPE 1
3T2773 MOTOR PARTS ARE SHOWN ON PAGES 239, 240 AND 241. AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
8N-3897 STARTING MOTOR GP-ELECTRIC
8N3897 ELECTRIC STARTING MOTOR GROUP-DUAL-32 VOLT DC-L.H.-TYPE 2
3T8943 MOTOR PARTS ARE SHOWN ON PAGES 241A, 241B & 241C
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-2785 STARTING MOTOR GP-ELECTRIC
3T2785 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 1 OF 3
REPLACED BY 6T0647-PAGE 241D
3T3421-PAGE 248
PART OF 8N3896 ELECTRIC STARTING MOTOR
FIELD REPLACEMENT ORDER 3T2780-PAGE 242. AN ATTACHMEMT
STARTING MOTOR GP-ELECTRIC
3T-2785 STARTING MOTOR GP-ELECTRIC
3T2785 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 2 OF 3
REPLACED BY 6T0647-PAGE 241D
PART OF 8N3896 ELECTRIC STARTING MOTOR
FIELD REPLACEMENT ORDER 3T2780-PAGE 242. AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-2785 STARTING MOTOR GP-ELECTRIC
3T2785 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 3 OF 3
REPLACED BY 6T0647-PAGE 241D
PART OF 8N3896 ELECTRIC STARTING MOTOR
FIELD REPLACEMENT ORDER 3T2780-PAGE 242. AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-2773 STARTING MOTOR GP-ELECTRIC
3T2773 ELECTRIC STARTING MOTOR GROUP-32 VOLT
REPLACED BY 3T8943-PAGE 241A
PART OF 8N3897 ELECTRIC STARTING MOTOR
FIELD REPLACEMENT ORDER 3T2779-PAGE 245. AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-8943 STARTING MOTOR GP-ELECTRIC
3T8943 ELECTRIC STARTING MOTOR GROUP-32 VOLT-PART 1 OF 3
PART OF 8N3897 ELECTRIC STARTING MOTOR GROUP SHOWN ON PAGE 235. 3T5051
SOLENOID PARTS ARE SHOWN ON PAGE 248A. FOR FIELD REPLACEMENT ORDER 3T8948
SHOWN ON PAGES 247B, 247C & 247D. AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-8943 STARTING MOTOR GP-ELECTRIC
3T8943 ELECTRIC STARTING MOTOR GROUP-32 VOLT-PART 2 OF 3
PART OF 8N3897 ELECTRIC STARTING MOTOR GROUP SHOWN ON PAGE 235
FOR FIELD REPLACEMENT ORDER 3T8948 SHOWN ON PAGES 247B, 247C & 247D
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-8943 STARTING MOTOR GP-ELECTRIC
3T8943 ELECTRIC STARTING MOTOR GROUP-32 VOLT-PART 3 OF 3
PART OF 8N3897 ELECTRIC STARTING MOTOR GROUP SHOWN ON PAGE 235
FOR FIELD REPLACEMENT ORDER 3T8948 SHOWN ON PAGES 247B, 247C AND 247D.
AN ATTACHMENT
6T-0647 STARTING MOTOR GP-ELECTRIC
6T647 ELECTRIC STARTING MOTOR GROUP-24 VOLT
PART OF 8N3896 ELECTRIC STARTING MOTOR GROUP SHOWN ON PAGE 234A
FOR FIELD REPLACEMENT ORDER 3T8967 LISTED ON PAGE 244A. AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
7G-7906 STARTING MOTOR GP-ELECTRIC
7G7906 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 1
PART OF 6T647 ELECTRIC STARTING MOTOR GROUP LISTED ON PAGE 241D
3T8635 SOLENOID PARTS ARE SHOWN ON PAGE 248A. AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
7G-7906 STARTING MOTOR GP-ELECTRIC
7G7906 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 2
PART OF 6T647 ELECTRIC STARTING MOTOR GROUP LISTED ON PAGE 241D
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-8953 STARTING MOTOR GP-ELECTRIC
3T8953 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 1 OF 3-TYPE 1
3T3421-PAGE 248
PART OF 6T0647 ELECTRIC STARTING MOTOR. AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-8953 STARTING MOTOR GP-ELECTRIC
3T8953 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 2 OF 3-TYPE 1
PART OF 6T0647 ELECTRIC STARTING MOTOR
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-8953 STARTING MOTOR GP-ELECTRIC
3T8953 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 3 OF 3-TYPE 1
PART OF 6T0647 ELECTRIC STARTING MOTOR
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-8953 STARTING MOTOR GP-ELECTRIC
3T8953 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 1 OF 3-TYPE 2
7T8854-PAGE 248B
PART OF 6T0647 ELECTRIC STARTING MOTOR. AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-8953 STARTING MOTOR GP-ELECTRIC
3T8953 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 2 OF 3-TYPE 2
PART OF 6T0647 ELECTRIC STARTING MOTOR
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-8953 STARTING MOTOR GP-ELECTRIC
3T8953 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 3 OF 3-TYPE 2
PART OF 6T0647 ELECTRIC STARTING MOTOR
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-2780 STARTING MOTOR GP-ELECTRIC
3T2780 ELECTRIC STARTING MOTOR GROUP-*R
DELCO-REMY 24 VOLT
3T3421-PAGE 248
REPLACED BY 3T8967-PAGE 244A
FIELD REPLACEMENT FOR 3T2786-PAGE 236
3T-8967 STARTING MOTOR GP-ELECTRIC
3T8967 ELECTRIC STARTING MOTOR GROUP-24 VOLT-FIELD INSTALLATION*R
STARTING MOTOR GP-ELECTRIC
3T-8949 STARTING MOTOR GP-ELECTRIC
3T8949 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 1 OF 3-TYPE 1
3T3421-PAGE 248
PART OF 3T8967 ELECTRIC STARTING MOTOR
STARTING MOTOR GP-ELECTRIC
3T-8949 STARTING MOTOR GP-ELECTRIC
3T8949 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 2 OF 3-TYPE 1
PART OF 3T8967 ELECTRIC STARTING MOTOR
STARTING MOTOR GP-ELECTRIC
3T-8949 STARTING MOTOR GP-ELECTRIC
3T8949 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 3 OF 3-TYPE 1
PART OF 3T8967 ELECTRIC STARTING MOTOR
STARTING MOTOR GP-ELECTRIC
3T-8949 STARTING MOTOR GP-ELECTRIC
3T8949 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 1 OF 3-TYPE 2
7T8854-PAGE 248B
PART OF 3T8967 ELECTRIC STARTING MOTOR
STARTING MOTOR GP-ELECTRIC
3T-8949 STARTING MOTOR GP-ELECTRIC
3T8949 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 2 OF 3-TYPE 2
PART OF 3T8967 ELECTRIC STARTING MOTOR
STARTING MOTOR GP-ELECTRIC
3T-8949 STARTING MOTOR GP-ELECTRIC
3T8949 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 3 OF 3-TYPE 2
PART OF 3T8967 ELECTRIC STARTING MOTOR
STARTING MOTOR GP-ELECTRIC
6T-0640 STARTING MOTOR GP-ELECTRIC
6T640 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 1
PART OF 6T8967 ELECTRIC STARTING MOTOR GROUP LISTED ON PAGE 244A
3T8635 SOLENOID PARTS ARE SHOWN ON PAGE 248A
STARTING MOTOR GP-ELECTRIC
6T-0640 STARTING MOTOR GP-ELECTRIC
6T640 ELECTRIC STARTING MOTOR GROUP-24 VOLT-PART 2
PART OF 3T8967 ELECTRIC STARTING MOTOR GROUP LISTED ON PAGE 244A
STARTING MOTOR GP-ELECTRIC
3T-2779 STARTING MOTOR GP-ELECTRIC
3T2779 ELECTRIC STARTING MOTOR GROUP
24 OR 32 VOLT
3T5051-PAGE 248A
REPLACED BY 3T8948-PAGE 247B
FIELD REPLACEMENT FOR 3T2773-PAGE 239
STARTING MOTOR GP-ELECTRIC
3T-8948 STARTING MOTOR GP-ELECTRIC
3T8948 ELECTRIC STARTING MOTOR GROUP-32 VOLT-PART 1 OF 3
3T5051-PAGE 248A
FIELD REPLACEMENT FOR 3T8943-PAGE 241A
STARTING MOTOR GP-ELECTRIC
3T-8948 STARTING MOTOR GP-ELECTRIC
3T8948 ELECTRIC STARTING MOTOR GROUP-32 VOLT-PART 2 OF 3
FIELD REPLACEMENT FOR 3T8943-PAGE 241A
STARTING MOTOR GP-ELECTRIC
3T-8948 STARTING MOTOR GP-ELECTRIC
3T8948 ELECTRIC STARTING MOTOR GROUP-32 VOLT-PART 3 OF 3
FIELD REPLACEMENT FOR 3T8943-PAGE 241A
SOLENOID AS-STARTING MOTOR
3T-8635 SOLENOID AS-STARTING MOTOR
3T8635 SOLENOID ASSEMBLY-24 VOLT
PART OF 7G7906 AND 6T640 ELECTRIC STARTING MOTOR GROUPS SHOWN ON PAGES
241E AND 244E
SOLENOID AS-STARTING MOTOR
7T-8854 SOLENOID AS-STARTING MOTOR
7T8854 SOLENOID ASSEMBLY-24 VOLT
PART OF 3T8953 & 3T8949 ELECTRIC STARTING MOTORS
STARTING MOTOR GP-AIR
8N-8477 STARTING MOTOR GP-AIR
8N8477 AIR STARTING MOTOR GROUP-R.H.-TYPE 2
SAE STANDARD ENGINE ROTATION
4W5107-PAGE 260A
FOR USE WITH SAE "00" FLYWHEEL HOUSING. AN ATTACHMENT
STARTING MOTOR GP-AIR
8N-8477 STARTING MOTOR GP-AIR
8N8477 AIR STARTING MOTOR GROUP-R.H.-TYPE 1
SAE STANDARD ENGINE ROTATION
8N8418-PAGE 260
FOR USE WITH SAE "00" FLYWHEEL HOUSING. AN ATTACHMENT
STARTING MOTOR GP-AIR
8N-8418 STARTING MOTOR GP-AIR
8N8418 AIR STARTING MOTOR GROUP
REPLACED BY 4W5101-PAGE 260A
PART OF 8N8477 AIR STARTING MOTOR
AN ATTACHMENT
STARTING MOTOR GP-AIR
4W-5107 STARTING MOTOR GP-AIR
4W5107 AIR STARTING MOTOR GROUP
PART OF 8N8477 AIR STARTING MOTOR
AN ATTACHMENT
CONTROL GP-AIR STARTING
5N-8166 CONTROL GP-AIR STARTING
5N8166 AIR STARTING MOTOR GROUP-24-32 VOLT DC
FOR USE WITH HYDRA-MECHANICAL OVER-RIDE, AIR START OR ELECTRIC ASSISTED
AIR START. CANNOT BE USED WITH MANUAL AIR START CONTROL. 5N8958-PAGE 251
5N8980-PAGE 248B. AN ATTACHMENT
CONTROL GP-AIR STARTING
8N-8491 CONTROL GP-AIR STARTING
8N8491 AIR STARTING CONTROL GROUP-24-32 VOLT DC
FOR USE WITH AIR START OR ELECTRIC ASSISTED AIR START
CANNOT BE USED WITH MANUAL AIR START CONTROLS AND HYDRA-MECHANICAL SYSTEM
5N8957-PAGE 251, 5N8980-PAGE 248B. AN ATTACHMENT
CONTROL GP-AIR STARTING
5N-8165 CONTROL GP-AIR STARTING
5N8165 AIR STARTING CONTROL GROUP-115 VOLT AC - TYPE 1
FOR USE WITH HYDRA-MECHANICAL OVERRIDE AND AIR START OR ELECTRIC ASSISTED
AIR START. CANNOT BE USED WITH MANUAL AIR START CONTROL. AN ATTACHMENT
CONTROL GP-AIR STARTING
5N-8165 CONTROL GP-AIR STARTING
5N8165 AIR STARTING CONTROL GROUP-115 VOLT AC-TYPE 2
4W1706-PAGE 263.02. FOR USE WITH HYDRA-MECHANICAL SYSTEM AND AIR START.
NOT FOR USE WITH MANUAL AIR START CONTROLS. AN ATTACHMENT
CONTROL GP-AIR STARTING
8N-8490 CONTROL GP-AIR STARTING
8N8490 AIR STARTING CONTROL GP-115 VOLT-TYPE 1
FOR USE WITH AIR START OR ELECTRIC ASSISTED AIR START
CANNOT BE USED WITH MANUAL AIR START CONTROLS AND HYDRA-MECHANICAL SYSTEM
AN ATTACHMENT
CONTROL GP-AIR STARTING
8N-8490 CONTROL GP-AIR STARTING
8N8490 CONTROL GP-AIR STARTING-115 VOLT-TYPE 2
FOR USE WITH AIR START OR ELECTRIC ASSISTED AIR START
NOT FOR USE WITH MANUAL AIR START CONTROLS OR HYDRA-MECHANICAL SYSTEM
AN ATTACHMENT
CONTROL GP-AIR STARTING
5N-8157 CONTROL GP-AIR STARTING
5N8157 AIR STARTING CONTROL GROUP-MANUAL-R.H.-REPLACED BY 4W7203-PAGE 265A
FOR USE WITH AIR START
CANNOT BE USED WITH HYDRA-MECHANICAL SYSTEM OR ELECTRIC AIR START CONTROL
AN ATTACHMENT
CONTROL GP-AIR STARTING
4W-7203 CONTROL GP-AIR STARTING
4W7203 AIR STARTING CONTROL GROUP-MANUAL-R.H.
4W5424-PAGE 267E
NOT FOR USE WITH HYDRO-MECHANICAL SYSTEM
AN ATTACHMENT
CONTROL GP-AIR STARTING
1W-8112 CONTROL GP-AIR STARTING
1W8112 AIR STARTING CONTROL GROUP-MANUAL-L.H.-PART 1 0F 2
SERIAL NO. 25Z1 TO 25Z458 INCLUSIVE
FOR USE WITH 1W8106 & 1W8108 MOUNTINGS AND AIR START.CANNOT BE USED WITH
ELECTRIC AIR START CONTROLS & HYDRO-MECHANICAL SYSTEMS.AN ATTACHMENT
CONTROL GP-AIR STARTING
1W-8112 CONTROL GP-AIR STARTING
1W8112 AIR STARTING CONTROL GROUP-MANUAL-L.H.-PART 2 OF 2
SERIAL NO. 25Z1 TO 25Z458 INCLUSIVE
FOR USE WITH 1W8106 & 148108 MOUNTINGS & AIR START.CANNOT BE USED WITH
ELECTRIC AIR START CONTROLS & HYDRO-MECHANICAL SYSTEMS. AN ATTACHMENT
CONTROL GP-AIR STARTING
4W-7209 CONTROL GP-AIR STARTING
4W7209 AIR STARTING CONTROL GROUP-MANUAL-L.H.-PART 1 OF 2-TYPE 1
SERIAL NO. 25Z459-UP
NOT FOR USE WITH HYDRO-MECHANICAL SYSTEM
AN ATTACHMENT
CONTROL GP-AIR STARTING
4W-7209 CONTROL GP-AIR STARTING
4W7209 AIR STARTING CONTROL GROUP-MANUAL-L.H.-PART 2 OF 2-TYPE 1
SERIAL NO. 25Z459-UP
4W5424-PAGE 267E
NOT FOR USE WITH HYDRO-MECHANICAL SYSTEM. AN ATTACHMENT
CONTROL GP-AIR STARTING
4W-7209 CONTROL GP-AIR STARTING
4W7209 AIR STARTING CONTROL GROUP-MANUAL-L.H.-PART 1 OF 2-TYPE 2
SERIAL NO. 25Z459-UP
NOT FOR USE WITH HYDRO-MECHANICAL SYSTEM
AN ATTACHMENT
CONTROL GP-AIR STARTING
4W-7209 CONTROL GP-AIR STARTING
4W7209 AIR STARTING CONTROL GROUP-MANUAL-L.H.-PART 2 OF 2-TYPE 2
SERIAL NO. 25Z459-UP
4W5424-PAGE 267E
NOT FOR USE WOITH HYDRO-MECHANICAL SYSTEM. AN ATTACHMENT
CONTROL GP-AIR STARTING
1W-8115 CONTROL GP-AIR STARTING
1W8115 AIR STARTING CONTROL GROUP-MANUAL WITH OVERRIDE-L.H.-PART 1 0F 2
SERIAL NO. 25Z1 TO 25Z458 INCLUSIVE. FOR USE WITH 1W8106 & 1W8108 MOUNTING
HYDRO-MECHANICAL SYSTEMA & AIR START.CANNOT BE USED WITH ELECTRIC AIR
START CONTROL. AN ATTACHMENT
CONTROL GP-AIR STARTING
1W-8115 CONTROL GP-AIR STARTING
1W8115 AIR STARTING CONTROL GROUP-MANUAL WITH OVERRIDE-L.H.-PART 2 OF 2
SERIAL NO. 25Z1 TO 25Z458 INCLUSIVE. FOR USE WITH 1W8106 & 1W8108
MOUNTINGS, HYDRO-MECHANICAL SYSTEMS AND AIR START.CANNOT BE USED WITH
ELECTRIC AIR START CONTROL. AN ATTACHMENT
CONTROL GP-AIR STARTING
4W-7212 CONTROL GP-AIR STARTING
4W7212 CONTROL GP-AIR STARTING-PART 1 OF 2
TYPE 1-MANUAL-WITH OVERRIDE-L.H.-S/N 25Z459-UP
4W1704-PAGE 309.05
AN ATTACHMENT
CONTROL GP-AIR STARTING
4W-7212 CONTROL GP-AIR STARTING
4W7212 CONTROL GP-AIR STARTING-PART 2 OF 2
TYPE 1-MANUAL-WITH OVERRIDE-L.H.-S/N 25Z459-UP
4W5424, 4W5426-PAGE 267E
AN ATTACHMENT
CONTROL GP-AIR STARTING
4W-7212 CONTROL GP-AIR STARTING
4W7212 CONTROL GP-AIR STARTING-PART 1 OF 2
TYPE 2-MANUAL-WITH OVERRIDE-L.H.-S/N 25Z459-UP
4W1704-PAGE 309.05
AN ATTACHMENT
CONTROL GP-AIR STARTING
4W-7212 CONTROL GP-AIR STARTING
4W7212 CONTROL GP-AIR STARTING-PART 2 OF 2
TYPE 2-MANUAL-WITH OVERRIDE-L.H.-S/N 25Z459-UP
4W5424, 4W5426-PAGE 267E
CONTROL GP-AIR STARTING
5N-8163 CONTROL GP-AIR STARTING
5N8163 AIR STARTING CONTROL GROUP-MANUAL WITH OVERRIDE-R.H.-TYPE 1
REPLACED BY 4W7206-PAGE 270.01.01
FOR USE WITH AIR START & HYDRO-MECHANICAL SYSTEM.NOT FOR USE WITH
ELECTRIC AIR START CONTROL. AN ATTACHMENT
CONTROL GP-AIR STARTING
5N-8163 CONTROL GP-AIR STARTING
5N8163 AIR STARTING CONTROL GROUP-MANUAL WITH OVERRIDE-R.H.-TYPE 2
REPLACED BY 4W7206-PAGE 270.01.01
FOR USE WITH AIR START & HYDRO-MECHANICAL SYSTEM.NOT FOR USE WITH ELECTRIC
AIR START CONTROL. AN ATTACHMENT
CONTROL GP-AIR STARTING
4W-7206 CONTROL GP-AIR STARTING
4W7206 AIR STARTING CONTROL GROUP-MANUAL-WITH OVERRIDE-R.H.
4W5424-4W5426-PAGE 267E, 4W1704-PAGE 309.05
AN ATTACHMENT
LINES GP-AIR START
8N-8481 LINES GP-AIR START
8N8481 AIR STARTING LINES GROUP-R.H.-TYPE 1
4N7556-PAGE 274
FOR USE WITH SAE "00" FLYWHEEL HOUSING, AIR START OR AIR START WITH
ELECTRIC PRELUBE. AN ATTACHMENT
LINES GP-AIR START
8N-8481 LINES GP-AIR START
8N8481 AIR STARTING LINES GROUP-R.H.-TYPE 2
4N7556-PAGE 274
FOR USE WITH SAE "00" FLYWHEEL HOUSING, AIR START OR AIR START WITH
ELECTRIC PRELUBE. AN ATTACHMENT
LINES GP-AIR START
8N-8489 LINES GP-AIR START
8N8489 AIR STARTING LINES GROUP-R.H.-"00" HOUSING-PART 1 OF 2-TYPE 1
4N7556-PAGE 274
FOR USE WITH AIR START WITH AIR PRELUBE
AN ATTACHMENT
LINES GP-AIR START
8N-8489 LINES GP-AIR START
8N8489 AIR STARTING LINES GROUP-R.H.-"00" HOUSING-PART 2 OF 2-TYPE 1
FOR USE WITH AIR START WITH AIR PRELUBE
AN ATTACHMENT
LINES GP-AIR START
8N-8489 LINES GP-AIR START
8N8489 AIR STARTING LINES GROUP-R.H.-"00" HOUSING-TYPE 2
FOR USE WITH AIR START WITH AIR PRELUBE
AN ATTACHMENT
SILENCER GP-AIR STARTING
8N-8486 SILENCER GP-AIR STARTING
8N8486 STARTING AIR SILENCER GROUP
AN ATTACHMENT
LUBRICATOR GP-AIR MOTOR
4N-7556 LUBRICATOR GP-AIR MOTOR
4N7556 AIR MOTOR LUBRICATOR GROUP
PART OF 8N8481 AND 8N8489 AIR STARTING LINES GROUPS SHOWN ON PAGES 271 AND
272. AN ATTACHMENT
TANK GP-AIR
1L-5010 TANK GP-AIR
1L5010 AIR RECEIVER GROUP-10.5 CU. FT. CAP
AN ATTACHMENT
VALVE GP-PRESSURE REDUCING
1L-2073 VALVE GP-PRESSURE REDUCING
1L2073 PRESSURE REDUCING VALVE GROUP
PART OF 8N8483 AIR CONTROL VALVE GROUP SHOWN ON PAGE 275
AN ATTACHMENT
SWITCH GP
SWITCH GP
7N-4196 SWITCH GP
7N4196 WOODWARD GOVERNOR SYNCRONIZING SWITCH GROUP
FOR USE WITH WOODWARD UG8 DUAL GOVERNORS. ALSO PART OF 1W5020, 1W5024,
8N6483 AND 8N6485 GOVERNOR GROUPS LISTED ON PAGES 187, 189 & 192
AN ATTACHMENT
SWITCH GP-ENGINE START
5N-8167 SWITCH GP-ENGINE START
5N8167 ENGINE START SWITCH GROUP
FOR USE WITH HYDRA-MECHANICAL AC OR DC OVERRIDE, ELECTRIC STARTING
MOTORS AND ELECTRIC AIR START CONTROLS. 5N8958 SWITCH PARTS ARE SHOWN ON
PAGE 251. AN ATTACHMENT
SWITCH GP-ENGINE START
8N-2941 SWITCH GP-ENGINE START
8N2941 ENGINE START SWITCH GROUP
FOR USE WITH ELECTRIC STARTING MOTORS AND ELECTRIC AIR START CONTROLS
CANNOT BE USED WITH HYDRA-MECHANICAL SYSTEMS. 5N8957 SWITCH PARTS ARE
SHOWN ON PAGE 251. AN ATTACHMENT
SWITCH GP
5N-8958 SWITCH GP
5N8958 SWITCH ASSEMBLY-TWO UNIT PUSHBUTTON
PART OF 5N8167 ENGINE START SWITCH AND 5N8166 AIR STARTING CONTROL GROUPS
SHOWN ON PAGES 250 AND 261. AN ATTACHMENT
SWITCH AS
5N-8957 SWITCH AS
5N8957 SWITCH ASSEMBLY-PUSHBUTTON
PART OF 8N8491 AIR STARTING CONTROL AND 8N2941 ENGINE START SWITCH GROUPS
SHOWN ON PAGES 250 AND 262. AN ATTACHMENT
SWITCH GP
4W-4755 SWITCH GP
4W4755 DUAL MAGNETIC SWITCH GROUP-24 VOLT
AN ATTACHMENT
SWITCH GP-MAGNETIC
4W-4754 SWITCH GP-MAGNETIC
4W4754 DUAL MAGNETIC SWITCH GROUP
AN ATTACHMENT
SWITCH GP
5N-2026 SWITCH GP
5N2026 SWITCH GROUP-OVERSPEED
PART OF 5N8513 JUNCTION BOX GROUP SHOWN ON PAGE 283
SWITCH AS
5N-9310 SWITCH AS
5N9310 PRESSURE SWITCH ASSEMBLY
PART OF 2W4926 DIVERTER VALVE LINES GROUP SHOWN ON PAGE 309B
AN ATTACHMENT
SWITCH AS-PRESSURE
4W-2188 SWITCH AS-PRESSURE
4W2188 PRESSURE SWITCH ASSEMBLY
PART OF 2W4928 DIVERTER VALVE LINES
AN ATTACHMENT
TANK GP-AIR
TANK GP-AIR
1L-5010 TANK GP-AIR
1L5010 AIR RECEIVER GROUP-10.5 CU. FT. CAP
AN ATTACHMENT
VALVE GP
VALVE AS
5N-8980 VALVE AS
5N8980 VALVE ASSEMBLY
PART OF 8N8491 & 5N8166 AIR STARTING MOTOR
AN ATTACHMENT
VALVE GP-DIVERTER
4W-1706 VALVE GP-DIVERTER
4W1706 DIVERTER VALVE GROUP
PART OF 5N8165 AIR STARTING CONTROL
AN ATTACHMENT
VALVE GP-AIR CONTROL
4W-5426 VALVE GP-AIR CONTROL
4W5426 AIR CONTROL VALVE GROUP
PART OF 4W7206 & 4W7212 AIR STARTING CONTROLS
AN ATTACHMENT
VALVE GP-AIR CONTROL
4W-5424 VALVE GP-AIR CONTROL
4W5424 AIR CONTROL VALVE GROUP
PART OF 4W7203,4W7206,4W7209 & 4W7212 AIR STARTING CONTROLS
AN ATTACHMENT
VALVE GP-AIR CONTROL
8N-8483 VALVE GP-AIR CONTROL
8N8483 AIR CONTROL VALVE GROUP-R.H.
FOR USE WITH AIR START SYSTEM ONLY
1L2073 VALVE PARTS ARE SHOWN ON PAGE 276
AN ATTACHMENT
VALVE GP-PRESSURE REDUCING
1L-2073 VALVE GP-PRESSURE REDUCING
1L2073 PRESSURE REDUCING VALVE GROUP
PART OF 8N8483 AIR CONTROL VALVE GROUP SHOWN ON PAGE 275
AN ATTACHMENT
VALVE GP-DIVERTER
2W-3035 VALVE GP-DIVERTER
2W3035 REMOTE SHUT-OFF GROUP
REFER TO CHART SHOWN ON PAGE 277 FOR USAGE
AN ATTACHMENT
VALVE GP-DIVERTER
2W-3034 VALVE GP-DIVERTER
2W3034 REMOTE SHUT-OFF GROUP
REFER TO CHART SHOWN ON PAGE 277 FOR USAGE
AN ATTACHMENT
VALVE GP-DIVERTER
2W-3033 VALVE GP-DIVERTER
2W3033 REMOTE SHUT-OFF GROUP
REFER TO CHART SHOWN ON PAGE 277 FOR USAGE
AN ATTACHMENT
VALVE GP-PRESSURE CONTROL
5N-5990 VALVE GP-PRESSURE CONTROL
5N5990 PRESSURE CONTROL VALVE GROUP-TYPE 1
5N5755, 5N4749-PAGE 299
PART OF 5N1960, 5N5330, 5N5338 & 5N5608 CONTROL SHUT-OFFS
AN ATTACHMENT
VALVE GP-PRESSURE CONTROL
5N-5990 VALVE GP-PRESSURE CONTROL
5N5990 PRESSURE CONTROL VALVE GROUP-TYPE 2
5N5755, 5N4749-PAGE 299
PART OF 5N1960, 5N5330, 5N5338 & 5N5609 CONTROL SHUT-OFFS
AN ATTACHMENT
VALVE GP-ACTUATOR
5N-6443 VALVE GP-ACTUATOR
5N6443 VALVE GROUP-ACTUATOR
PART OF 5N1960, 5N5330, 5N5608 AND 5N5338 CONTROL SHUT-OFF GROUPS SHOWN ON
PAGES 289, 291, 293 AND 295. AN ATTACHMENT
VALVE GP
5N-2718 VALVE GP
5N2718 VALVE GROUP
PART OF 5N1960, 5N5330, 5N5608 AND 5N5338 CONTROL SHUT-OFF GROUPS SHOWN ON
PAGES 288, 290, 292 AND 294. AN ATTACHMENT
VALVE GP-CONTROL
5N-4749 VALVE GP-CONTROL
5N4749 VALVE GROUP
PART OF 5N5990 PRESSURE CONTROL VALVE
AN ATTACHMENT
VALVE GP
5N-5755 VALVE GP
5N5755 VALVE GROUP
PART OF 5N5990 PRESSURE CONTROL VALVE
AN ATTACHMENT
VALVE GP-DIVERTER
2W-3036 VALVE GP-DIVERTER
2W3036 DIVERTER VALVE GROUP
PART OF 2W4926 DIVERTER VALVE LINES GROUP SHOWN ON PAGES 309B
AN ATTACHMENT
VALVE GP-DIVERTER
4W-1778 VALVE GP-DIVERTER
4W1778 DIVERTER VALVE GROUP
4W1708-PAGE 309.02
REFER TO 5N8200 CHART-PAGE 277A
AN ATTACHMENT
VALVE GP-DIVERTER
4W-1702 VALVE GP-DIVERTER
4W1702 DIVERTER VALVE GROUP
REFER TO 5N8200 CHART-PAGE 277A
AN ATTACHMENT
VALVE GP-DIVERTER
4W-1777 VALVE GP-DIVERTER
4W1777 DIVERTER VALVE GROUP
4W1707-PAGE 309.03
REFER TO 5N8200 CHART-PAGE 277A
AN ATTACHMENT
VALVE GP-DIVERTER
4W-1708 VALVE GP-DIVERTER
4W1708 DIVERTER VALVE GROUP
PART OF 4W1778 DIVERTER VALVE
AN ATTACHMENT
VALVE GP-DIVERTER
4W-1771 VALVE GP-DIVERTER
4W1771 DIVERTER VALVE GROUP
4W1701-PAGE 309.04
REFER TO 5N8200 CHART-PAGE 277A
AN ATTACHMENT
VALVE GP-DIVERTER
4W-1707 VALVE GP-DIVERTER
4W1707 DIVERTER VALVE GROUP
PART OF 4W1777 DIVERTER VALVE
AN ATTACHMENT
VALVE GP-DIVERTER
4W-1703 VALVE GP-DIVERTER
4W1703 DIVERTER VALVE GROUP
PART OF 2W4927 & 2W4928 DIVERTER VALVE LINES
AN ATTACHMENT
VALVE GP-DIVERTER
4W-1701 VALVE GP-DIVERTER
4W1701 DIVERTER VALVE GROUP
PART OF 4W1771 DIVERTER VALVE
AN ATTACHMENT
VALVE GP-DIVERTER
4W-1704 VALVE GP-DIVERTER
4W1704 DIVERTER VALVE GROUP
PART OF 2W4927, 2W4928 DIVERTER VALVE LINES & 4W7206 & 4W7212 AIR
STARTING CONTROLS
AN ATTACHMENT
VALVE GP-DIVERTER
4W-1775 VALVE GP-DIVERTER
4W1775 DIVERTER VALVE GROUP
PART OF 2W4925, 2W4927 & 2W4928 DIVERTER VALVE LINES
AN ATTACHMENT
WIRING GP
WIRING GP-GOVERNOR SOLENOID
5N-8572 WIRING GP-GOVERNOR SOLENOID
5N8572 WIRING GROUP-GOVERNOR SOLENOID
PART OF 8N6477 AND 8N6481 GOVERNOR GROUPS LISTED ON PAGES 190 AND 191
AN ATTACHMENT
HARNESS AS-ENGINE
4W-2636 HARNESS AS-ENGINE
4W2636 HARNESS ASSEMBLY-PART 1
PART OF 4W2635 JUNCTION BOX GROUP SHOWN ON PAGE 283B
HARNESS AS-ENGINE
4W-2636 HARNESS AS-ENGINE
4W2636 HARNESS ASSEMBLY-PART 2
PART OF 4W2635 JUNCTION BOX GROUP SHOWN ON PAGE 283B
HARNESS AS-WIRING
5N-8511 HARNESS AS-WIRING
5N8511 WIRING HARNESS ASSEMBLY-PART 1 OF 2
PART OF 5N8513 JUNCTION BOX GROUP SHOWN ON PAGE 283
HARNESS AS-WIRING
5N-8511 HARNESS AS-WIRING
5N8511 WIRING HARNESS ASSEMBLY-PART 2 OF 2
PART OF 5N8513 JUNCTION BOX GROUP SHOWN ON PAGE 283
CONVERSION GP-WIRING
5N-9305 CONVERSION GP-WIRING
5N9305 WIRING CONVERSION GROUP-ENGINE-TYPE 2
5N8878-PAGE 285H
FOR USE WITH 2W8947 ENGINE WIRING
AN ATTACHMENT
CONVERSION GP-WIRING
5N-9305 CONVERSION GP-WIRING
5N9305 WIRING CONVERSION GROUP-ENGINE-TYPE 1
FOR USE WITH 2W8947 ENGINE WIRING
AN ATTACHMENT
4W-4751 WIRING GP-ENGINE
4W4751 ENGINE WIRING GROUP
PART OF 2W8947 ENGINE WIRING GROUP LISTED ON PAGE 285B
AN ATTACHMENT
2W-8947 WIRING GP-ENGINE
2W8947 ENGINE WIRING GROUP
AN ATTACHMENT
FASTENER GP-ENGINE WIRING
2W-8948 FASTENER GP-ENGINE WIRING
2W8948 FASTENER GROUP-PART 1 0F 2-TYPE 1
PART OF 2W8947 ENGINE WIRING
AN ATTACHMENT
FASTENER GP-ENGINE WIRING
2W-8948 FASTENER GP-ENGINE WIRING
2W8948 FASTENER GROUP-PART 2 OF 2-TYPE 1
PART OF 2W8947 ENGINE WIRING
AN ATTACHMENT
FASTENER GP-ENGINE WIRING
2W-8948 FASTENER GP-ENGINE WIRING
2W8948 FASTENER GROUP-PART 1 OF 2-TYPE 2
PART OF 2W8947 ENGINE WIRING
AN ATTACHMENT
FASTENER GP-ENGINE WIRING
2W-8948 FASTENER GP-ENGINE WIRING
2W8948 FASTENER GROUP-PART 2 OF 2-TYPE 2
PART OF 2W8947 ENGINE WIRING
AN ATTACHMENT
FASTENER GP-ENGINE WIRING
2W-8948 FASTENER GP-ENGINE WIRING
2W8948 FASTENER GP- PART 1 OF 2
TYPE 3
PART OF 2W8947 ENGINE WIRING
AN ATTACHMENT
FASTENER GP-ENGINE WIRING
2W-8948 FASTENER GP-ENGINE WIRING
2W8948 FASTENER GP- PART 2 OF 2
TYPE 3
PART OF 2W8947 ENGINE WIRING
AN ATTACHMENT
4W-0180 HARNESS GP-WIRING
4W0180 WIRING HARNESS ASSEMBLY-PART 1 OF 2
PART OF 4W4751 ENGINE WIRING
AN ATTACHMENT
4W-0180 HARNESS GP-WIRING
4W0180 WIRING HARNESS ASSEMBLY-PART 2 OF 2
PART OF 4W4751 ENGINE WIRING
AN ATTACHMENT
WIRE AS-SERVICE METER
4W-1568 WIRE AS-SERVICE METER
4W1568 WIRE AS-SERVICE METER
S/N 25Z492-UP
FIELD INSTALLATION
CONNECTION GP
CONNECTION GP-ELECTRICAL
7W-7795 CONNECTION GP-ELECTRICAL
7W7795 CONNECTION GP-ELECTRICAL
AN ATTACHMENT
HEATER GP
MOUNTING GP-JACKET WTR HEATER
4W-4007 MOUNTING GP-JACKET WTR HEATER
4W4007 JACKET WATER HEATER MOUNTING GROUP-TYPE 1
AN ATTACHMENT
MOUNTING GP-JACKET WTR HEATER
4W-4007 MOUNTING GP-JACKET WTR HEATER
4W4007 JACKET WATER HEATER MOUNTING GROUP-TYPE 2
AN ATTACHMENT
HEATER GP-JACKET WATER
4N-0730 HEATER GP-JACKET WATER
4N0730 JACKET WATER HEATER GROUP
NOTE: FOR USAGE REFER TO 7W1450 CHART-PAGE 226
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
Temperature Sensor Pocket Kit Available For Danfoss® Temperature Contactors
1989/08/01
New Exhaust Manifold Sections Contain A Port To Install Temperature Sensors {1059,1921}
1997/02/17
Special Instruction
Installation Procedure For Mobile Exhaust Port Kit On All Select Caterpillar and Non-Caterpillar Diesel Engines {0781, 1408, 1919, 7466}
Installation Procedure For Mobile Exhaust Port Kit On All Select Caterpillar and Non-Caterpillar Diesel Engines {0781, 1408, 1919, 7466}
Service Magazine
Temperature Sensor Pocket Kit Available For Danfoss® Temperature Contactors {1350,7403}
1989/08/07
Operation and Maintenance Manual
Alarms and Shutoffs
3500 Industrial and Generator Set Engines
Service Magazine
New Heat Shield For Wiring To Electrical Shutoff Group{7400,7403,7418}
1984/10/29
Engine Shuts Down Immediately After Start-Up {7400}
1985/10/21
New Instruction Films (Decals) Available {7405,7451}
1985/11/04
Generator Sets Wired For Use With Customer-Supplied Switch Gear; Do Not Run Without Switch Gear{7002,7400}
1987/01/19
Engine News
New Regulator And Field Coil Assemblies Used
1981/11/25
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
New Seal Used In Alternator Mounting Group
1984/12/12
Improved V-Belts For Alternator
1986/10/01
Identification Of External Terminals On Alternators
1987/04/01
Alternator/Generator Output Test On The Engine
1987/05/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
New Wear Sleeve Available For Alternator Drive Pulley
1988/02/01
New Alternator Drive Pulley Has Hardened Wear Sleeve; New Seal Used On Pulley
1989/01/01
New Design Alternator Belt Used
1989/09/01
New Spacer Used In Attachment Alternator Belt Guard Group
1989/11/01
New Alternator Drive Pulley Seal Used With New Drive Pulley; Poly-Vee Belt Can Be Installed
1990/11/01
New Tube And Bracket Provide Clearance For Alternator
1991/01/01
New Alternator Guard Used In Belt Guard Groups
1993/03/01
A New Seal Is Used In The Alternator Mounting Group {1405}
2000/11/01
Repair Parts Available for Alternator R-Terminal {1405}
2000/12/01
Harness Repair of Alternator R-Terminal Connector {1405}
2000/12/01
Improved Alternator Adjusting Rod {1405}
2005/03/07
Improved Design for the Alternator Guard Assembly {7168}
2005/05/30
Recommendations for Battery Charging for Genset Usage {1401, 1406}
2008/06/30
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Alternator - Inspect
3500 Industrial and Generator Set Engines
Special Instruction
Generator Set Start-up Checklist{1021, 1404, 7002}
Generator Set Start-up Checklist{1021, 1404, 7002}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Alternator
DELCO REMY 20-SI SERIES ALTERNATOR
Alternator and Regulator
3500 Generator Set Engines
Alternator
30SI Series and 34SI Series Alternator
Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator
N3 Series Brushless Alternators
Alternator and Regulator
3500 Generator Set Engines
Systems Operation
Systems Operation
DELCO REMY 20-SI SERIES ALTERNATOR
General Information
30SI Series and 34SI Series Alternator
Normal Operation
30SI Series and 34SI Series Alternator
Component Description
30SI Series and 34SI Series Alternator
Alternator
3500 Engines
General Information
HDB Series and M1 Series Heavy Duty Brushless Alternators
Normal Operation
HDB Series and M1 Series Heavy Duty Brushless Alternators
Component Description
HDB Series and M1 Series Heavy Duty Brushless Alternators
General Information
N3 Series Brushless Alternators
Component Description
N3 Series Brushless Alternators
Normal Operation
N3 Series Brushless Alternators
Testing and Adjusting
Testing And Adjusting
DELCO REMY 20-SI SERIES ALTERNATOR
T1 Alternator Output - Test
30SI Series and 34SI Series Alternator
T2 Electrical System Current - Test
30SI Series and 34SI Series Alternator
T3 Charging System - Test
30SI Series and 34SI Series Alternator
T4 Alternator Drive System - Check
30SI Series and 34SI Series Alternator
T5 Alternator Current - Test
30SI Series and 34SI Series Alternator
T6 Residual Magnetism Restoration
30SI Series and 34SI Series Alternator
T7 Identifying Source of Current Draw - Test
30SI Series and 34SI Series Alternator
T8 Alternator Overcharging - Test
30SI Series and 34SI Series Alternator
General Information
30SI Series and 34SI Series Alternator
Initial Troubleshooting Procedure
30SI Series and 34SI Series Alternator
Component - Test
30SI Series and 34SI Series Alternator
Alternator Regulator
3500 Engines
Charging System
3500 Engines
Field Winding - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Capacitor - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Stator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Rectifier - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Residual Magnetism - Restore
N3 Series Brushless Alternators
Regulator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Field Winding - Test
N3 Series Brushless Alternators
Capacitor - Test
N3 Series Brushless Alternators
Rectifier - Test
N3 Series Brushless Alternators
Stator - Test
N3 Series Brushless Alternators
Regulator - Test
N3 Series Brushless Alternators
Troubleshooting
General Information
HDB Series and M1 Series Heavy Duty Brushless Alternators
Charging System
HDB Series and M1 Series Heavy Duty Brushless Alternators
Disassembly and Assembly
Alternator
DELCO REMY 20-SI SERIES ALTERNATOR
Alternator - Disassemble
30SI Series and 34SI Series Alternator
Alternator - Assemble
30SI Series and 34SI Series Alternator
Alternator - Disassemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Disassemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble
N3 Series Brushless Alternators
Alternator - Disassemble
N3 Series Brushless Alternators
Alternator - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Seal Used In Alternator Mounting Group{1405,1400}
1984/12/10
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Improved V-Belts For Alternator{1405}
1986/09/22
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New Wear Sleeve Available For Alternator Drive Pulley{1400,1405}
1988/02/15
New Alternator Drive Pulley Has Hardened Wear Sleeve; New Seal Used On Pulley{1425,1357}
1988/12/12
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
New Design Alternator Belt Used{1405,1406}
1989/09/18
New Spacer Used In Alternator Belt Guard Group{7168}
1989/10/23
New Alternator Drive Pulley Seal Used With New Drive Pulley; Poly-Vee Belt Can Be Installed {1425,1357}
1990/11/12
New Tube And Bracket Provide Clearance For Alternator{1380,1405}
1990/12/24
New Alternator Guard Used In Belt Guard Groups{7168}
1993/03/08
Repair Parts Available for Alternator R-Terminal {1405}
2000/10/02
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Two New Tools Check Tension on Engine Belts {0701, 0767}
2004/05/03
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Heavy-Duty Line Of Batteries Available To U.S. Dealers
1986/09/01
5P957 And 5P3514 Coolant And Battery Tester
1987/04/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Safety Vent Caps For Caterpillar Batteries
1977/07/13
Recommendations for Battery Charging for Genset Usage {1401, 1406}
2008/06/30
New Procedure For Disconnecting The Battery Cables On Generator Sets {1401, 1402, 751B}
2009/10/23
Operation and Maintenance Manual
Battery Electrolyte Level - Check
3500 Industrial and Generator Set Engines
Starting with Jump Start Cables
3500 Industrial and Generator Set Engines
Battery Charger - Check
3500 Industrial and Generator Set Engines
Batteries - Replace
3500 Industrial and Generator Set Engines
Cold Weather Starting
3500 Industrial and Generator Set Engines
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Battery Test Procedure {1401}
Battery Test Procedure {1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
Testing and Adjusting
Charging System - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 168 FMI 3 Electrical System Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 168 FMI 4 Electrical System Voltage Below Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Battery
3500 Engines
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
New Design Alternator Belt Used{1405,1406}
1989/09/18
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
New Battery Is Now Used as a Service Replacement for Certain Cat<SUP>&reg;</SUP> Products {1401, 1926}
2014/04/24
Engine News
Temperature Sensor Pocket Kit Available For Danfoss&reg; Temperature Contactors
1989/08/01
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box
1992/10/01
Special Instruction
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Service Magazine
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay){1426,1450}
1989/07/24
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box{1423,1422}
1992/11/09
New Programmable Logic Control With In-Phase Monitor For Contactor Type Automatic Transfer Switches {4469}
1996/04/01
Engine News
Wiring Harness Conduit Component Sizes
1985/02/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up
1986/08/01
Obsolete Merlin Gerin CK and CM Frame Circuit Breaker Replacements Are Now Available {1420, 4461}
2013/05/28
Special Instruction
Replacement Of 5N1848, 5N1849 And 5N1850 A1 Module Regulator Assemblies{4467}
Replacement Of 5N1848, 5N1849 And 5N1850 A1 Module Regulator Assemblies{4467}
Procedure for Replacing the Circuit Breaker Group on Certain Generator Sets{1420, 4461}
Procedure for Replacing the Circuit Breaker Group on Certain Generator Sets{1420, 4461}
Service Letter-NACD
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Generator Circuit Breaker Mounting Bolts May Be Loose
Generator Circuit Breaker Mounting Bolts May Be Loose
Circuit Breaker Interrupting Rating on Griffin and Lafayette-Packaged Engine Generator Sets
Circuit Breaker Interrupting Rating on Griffin and Lafayette-Packaged Engine Generator Sets
Service Letter-China
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
Service Letter-Asia
Systems Operation
Circuit Breaker
3500 Engines
Service Letter-APD
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
Disassembly and Assembly
Regulator Assembly
SR4 GENERATOR (THREE PHASE FULL WAVE EXCITATION & REGULATION
Service Magazine
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Troubleshooting Solid State Suppressors{4467,4466,4450}
1986/04/07
Special Instruction Available With Replacement Information For 7C2662, 7C2664 Or 7C3507 VR3 Voltage Regulators{4467}
1990/02/19
Procedure To Set Voltage Droop On SR 4 Generators With VR3 Voltage Regulators Using Resistive Load Bank{4475,4467}
1991/04/22
Engine News
Temperature Sensor Pocket Kit Available For Danfoss&reg; Temperature Contactors
1989/08/01
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box
1992/10/01
New Programmable Logic Control With In-Phase Monitor For Contactor Type Automatic Transfer Switches{4469}
1996/05/09
Special Instruction
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Specifications
Temperature Contactor
3500 Generator Set Engines
Pressure Contactor
3500 Generator Set Engines
Testing and Adjusting
Temperature Contactor - Test
3500 Engines
Service Magazine
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay){1426,1450}
1989/07/24
Temperature Sensor Pocket Kit Available For Danfoss&reg; Temperature Contactors {1350,7403}
1989/08/07
New Programmable Logic Control With In-Phase Monitor For Contactor Type Automatic Transfer Switches {4469}
1996/04/01
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Air Starter Relay Valve Improved{1462}
1991/06/24
Engine News
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP)
1991/04/01
Unwanted Engine Shutdown Caused By &quot;01&quot; And/Or &quot;04&quot; Diagnostic; New &quot;09&quot; Diagnostic Available With 8T9881-8 Electronic Control Module (ECM)
1991/05/01
Real Time Clock is no Longer Supported {1901}
Real Time Clock is no Longer Supported {1901}
Improved Electronic Control Module (ECM) is Now Used On Certain Engines {1901}
Improved Electronic Control Module (ECM) is Now Used On Certain Engines {1901}
Special Instruction
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
ADEM 3 Conversion for G3500 Engines{1000, 1901}
ADEM 3 Conversion for G3500 Engines{1000, 1901}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Letter-NACD
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP){4490}
1991/04/08
Unwanted Engine Shutdown Caused By &quot;01&quot; And/Or &quot;04&quot; Diagnostic; New &quot;09&quot; Diagnostic Available With 8T9881-8 Electronic Control Module (ECM){4490}
1991/05/13
Troubleshooting 04 Diagnostic Code On Electronic Modular Control Panels (EMCP){4490,4450}
1992/05/11
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Engine News
Low Oil Level In Governor Can Cause Erratic Engine RPM
1985/02/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Software For Customer Communications Module (CCM){1920,1926}
1997/03/01
New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01
Finding the Latest Flash Files {7620}
2009/10/01
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Improved Electronic Control Module (ECM) is Now Used On Certain Engines {1901}
Improved Electronic Control Module (ECM) is Now Used On Certain Engines {1901}
Operation and Maintenance Manual
Engine Protective Devices - Check
3500 Industrial and Generator Set Engines
Engine Speed Governing
3500 Industrial and Generator Set Engines
Cold Weather Starting
3500 Industrial and Generator Set Engines
Gauges and Indicators
3500 Industrial and Generator Set Engines
Special Instruction
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
ADEM 3 Conversion for G3500 Engines{1000, 1901}
ADEM 3 Conversion for G3500 Engines{1000, 1901}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
CID 590 FMI 9 Engine Electronic Control Module Abnormal Update - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Engine Speed Measurement
3500 Engines
Service Magazine
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-CSARL
Service Letter-Americas
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Digital Tachometer Available{7462}
1983/08/15
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
New Digital Tachometers Available As Attachments{7462}
1990/06/18
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Engine News
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Recommendations for Gas Engine Spark Plugs {1550, 1555}
2010/10/20
Service Magazine
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Engine News
New Engine Timing Indicator Group Available
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Testing and Adjusting
Indicators for Engine Oil Pressure
3500 Engines
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Heavy-Duty Line Of Batteries Available To U.S. Dealers
1986/09/01
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel
1988/12/01
&quot;Ugly's Electrical-References&quot; SEBD0983, Now Available
1990/06/01
Voltage Regulator Droop Connections Are Shown Incorrectly In Service Manuals
1990/09/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP)
1991/04/01
Unwanted Engine Shutdown Caused By &quot;01&quot; And/Or &quot;04&quot; Diagnostic; New &quot;09&quot; Diagnostic Available With 8T9881-8 Electronic Control Module (ECM)
1991/05/01
Air Starter Relay Valve Improved
1991/07/01
Safety Vent Caps For Caterpillar Batteries
1977/07/13
Operation and Maintenance Manual
Engine Protective Devices - Check
3500 Industrial and Generator Set Engines
Starting Motor - Inspect
3500 Industrial and Generator Set Engines
Starting the Engine
3500 Industrial and Generator Set Engines
Special Instruction
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
Service Letter-Australia
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
Service Letter-CFEL
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
Service Letter-CSARL
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
Service Letter-Americas
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
Service Letter-Brazil
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Loss Of The Desired Speed Signal During Earth Fault Test
Loss Of The Desired Speed Signal During Earth Fault Test
Specifications
Alternator
DELCO REMY 20-SI SERIES ALTERNATOR
Service Letter-China
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
Service Letter-Asia
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
Systems Operation
Systems Operation
DELCO REMY 20-SI SERIES ALTERNATOR
ETS Introduction
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines
ETR Component Descriptions
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines
ETS Component Descriptions
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines
ETS Junction Box-Switchgear Not Required (OP,WT,OS)
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines
ETS Junction Box-Switchgear Required (OP,WT,OS)
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines
ETS Junction Box-Switchgear Not Required (OP,WT)
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines
Abbreviations and Symbols
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines
Junction Box and Enclosure Group
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines
ETR Junction Box-Switchgear Required (OP,WT,OS)
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines
ETR Junction Box-Switchgear Not Required (OP,WT,OS)
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines
ETR Junction Box-Switchgear Not Required (OP,WT)
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines
ETR Introduction
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines
Electrical System Operation
3500 Engines
Air Starting System Operation
3500 Engines
Service Letter-APD
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
The VR3 PM Voltage Regulators Need To Be Part Stock Changed On Certain 3412, 3508, 3512, 3516, G3508, And G3516 Generator Sets
Testing and Adjusting
Testing And Adjusting
DELCO REMY 20-SI SERIES ALTERNATOR
General Testing and Adjusting Information
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines
Disassembly and Assembly
Alternator
DELCO REMY 20-SI SERIES ALTERNATOR
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
New Heat Shield For Wiring To Electrical Shutoff Group{7400,7403,7418}
1984/10/29
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors{1319}
1984/12/10
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors{1319}
1985/02/11
Improved Remote Shutoff Group Has New Pressure Control Group{1050,1078,1085}
1985/05/13
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Oil Pressure Shutdown Specifications Change For Hydramechanical Shutoff System{1085}
1985/11/25
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Troubleshooting Solid State Suppressors{4467,4466,4450}
1986/04/07
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up {4450}
1986/07/28
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Water Level Switch Improved{1354,1350}
1986/10/13
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Generator Sets Wired For Use With Customer-Supplied Switch Gear; Do Not Run Without Switch Gear{7002,7400}
1987/01/19
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting{1400}
1987/05/04
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
New Wear Sleeve Available For Alternator Drive Pulley{1400,1405}
1988/02/15
Cold Weather Starting{1213,1250,1274,1450}
1988/02/22
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel {0315,7418}
1988/11/28
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
New Alternator Drive Pulley Has Hardened Wear Sleeve; New Seal Used On Pulley{1425,1357}
1988/12/12
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay){1426,1450}
1989/07/24
New Design Alternator Belt Used{1405,1406}
1989/09/18
New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group{7418,1078}
1989/10/23
4C4213 Insulation Tester for Electrical Power Generation{0785}
1989/12/11
Special Instruction Available With Replacement Information For 7C2662, 7C2664 Or 7C3507 VR3 Voltage Regulators{4467}
1990/02/19
9W2126 Module (Relay Module){7490}
1990/03/12
Improvements Reduce Vibration To The Low Water Level Switch On Expansion Tanks{7422,1354}
1990/07/23
Voltage Regulator Droop Connections Are Shown Incorrectly In Service Manuals{4475}
1990/09/10
New Alternator Drive Pulley Seal Used With New Drive Pulley; Poly-Vee Belt Can Be Installed {1425,1357}
1990/11/12
New Ether Starting Aid Groups Available{1456}
1990/12/17
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP){4490}
1991/04/08
Procedure To Set Voltage Droop On SR 4 Generators With VR3 Voltage Regulators Using Resistive Load Bank{4475,4467}
1991/04/22
Unwanted Engine Shutdown Caused By &quot;01&quot; And/Or &quot;04&quot; Diagnostic; New &quot;09&quot; Diagnostic Available With 8T9881-8 Electronic Control Module (ECM){4490}
1991/05/13
Air Starter Relay Valve Improved{1462}
1991/06/24
Troubleshooting 04 Diagnostic Code On Electronic Modular Control Panels (EMCP){4490,4450}
1992/05/11
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box{1423,1422}
1992/11/09
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Engine News
New Format of PC Software for Customer Communication Module {1926}
2000/03/01
Operation and Maintenance Manual
Battery - Replace
Customer Communication Module (CCM) for Diesel Engines
Communication Initialization
Customer Communication Module (CCM) for Diesel Engines
Communication Parameters - Identify
Customer Communication Module (CCM) for Diesel Engines
General Installation Requirements
Customer Communication Module (CCM) for Diesel Engines
Serial Number Location
Customer Communication Module (CCM) for Diesel Engines
Acronyms
Customer Communication Module (CCM) for Diesel Engines
General Wiring Diagram
Customer Communication Module (CCM) for Diesel Engines
Data Link Guidelines
Customer Communication Module (CCM) for Diesel Engines
Parameter Identifiers for EMCP II
Customer Communication Module (CCM) for Diesel Engines
Specifications
Customer Communication Module (CCM) for Diesel Engines
Model View Illustrations
Customer Communication Module (CCM) for Diesel Engines
General Operation
Customer Communication Module (CCM) for Diesel Engines
General Specifications for Wire and Cable
Customer Communication Module (CCM) for Diesel Engines
Communication Protocol for Customized Systems
Customer Communication Module (CCM) for Diesel Engines
Display Description
Customer Communication Module (CCM) for Diesel Engines
Engine Number - Program
Customer Communication Module (CCM) for Diesel Engines
Fault Identifiers
Customer Communication Module (CCM) for Diesel Engines
Instruction Identifiers
Customer Communication Module (CCM) for Diesel Engines
Parameter Identifiers for General Usage
Customer Communication Module (CCM) for Diesel Engines
Programming Examples for M5X Protocol
Customer Communication Module (CCM) for Diesel Engines
Reference Material
Customer Communication Module (CCM) for Diesel Engines
Password - Enable and Disable
Customer Communication Module (CCM) for Diesel Engines
Initialization for Direct Connection
Customer Communication Module (CCM) for Diesel Engines
Initialization for Remote Connection with Modem
Customer Communication Module (CCM) for Diesel Engines
Diagnostic Code - Troubleshoot
Customer Communication Module (CCM) for Diesel Engines
M5X Protocol - Troubleshoot
Customer Communication Module (CCM) for Diesel Engines
System - Troubleshoot
Customer Communication Module (CCM) for Diesel Engines
RS-232C Cable Requirements
Customer Communication Module (CCM) for Diesel Engines
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Engine News
Proper Termination Techniques May Increase VR3 Voltage Regulator Reliability {1410}
2003/10/01
Correct Wiring Diagrams Have Been Identified for 480 Volt Sensing VR3 to VR6 Regulator Conversion {4467}
2004/12/01
Improved Software for Caterpillar Digital Voltage Regulator (CDVR) Now Available {4467, 7620}
2006/12/04
Operation and Maintenance Manual
Voltage Regulators
SR4 HV and SR4B HV Generators
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
VR6B Voltage Regulator Installation For 480V Sensing VR3 Regulators On 3500 Generator Sets {4467}
VR6B Voltage Regulator Installation For 480V Sensing VR3 Regulators On 3500 Generator Sets {4467}
Technical Information Bulletin
Shock Hazard for the VR-6 and K65-12B Voltage Regulators
Shock Hazard for the VR-6 and K65-12B Voltage Regulators
VR6 Or K65-12B Voltage Regulators Require An External Jumper Wire When Used With A Permanent Magnet Generator{4467}
VR6 Or K65-12B Voltage Regulators Require An External Jumper Wire When Used With A Permanent Magnet Generator{4467}
Requirements for Troubleshooting and Replacing a Caterpillar Digital Voltage Regulator CDVR{4467}
Requirements for Troubleshooting and Replacing a Caterpillar Digital Voltage Regulator CDVR{4467}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Engine News
New Oil Pressure Sender Assembly Used
1988/11/01
Improved Pressure Gauge Sender Used
1988/12/01
Temperature Sensor Pocket Kit Available For Danfoss&reg; Temperature Contactors
1989/08/01
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP)
1991/04/01
New Exhaust Manifold Sections Contain A Port To Install Temperature Sensors {1059,1921}
1997/02/17
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Service Letter-NACD
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Sending Unit - Engine Oil Pressure
3500 Generator Set Engines
Sending Unit - Engine Oil Pressure
3500 Generator Set Engines
Sending Unit
3500 Generator Set Engines
Service Letter-China
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Sending Unit - Test - Engine Oil Pressure
3500 Engines
Service Magazine
New &quot;Two Inch&quot; Gauges, Indicator And Senders Available{7450}
1986/06/02
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Temperature Sensor Pocket Kit Available For Danfoss&reg; Temperature Contactors {1350,7403}
1989/08/07
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP){4490}
1991/04/08
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Engine News
New Oil Pressure Sender Assembly Used
1988/11/01
Improved Pressure Gauge Sender Used
1988/12/01
Temperature Sensor Pocket Kit Available For Danfoss&reg; Temperature Contactors
1989/08/01
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP)
1991/04/01
New Exhaust Manifold Sections Contain A Port To Install Temperature Sensors {1059,1921}
1997/02/17
New Engine Pressure Sensors Available {1916,1917,1922,1923,1924}
1999/03/01
New Coolant Level Sensor Available {7422}
2001/02/01
Correction to Troubleshooting , "GSC CID 0190 - FMI 02" {1907}
2002/07/01
Coolant Sensor Installation Service Notes {5574}
2005/12/26
Improved Engine Oil Pressure Sensor Is Used on Certain Commercial Engines {1924}
2011/07/11
New Oil Mist Detectors Are Available for Certain 3516 Marine Engines {1336}
2013/02/20
Operation and Maintenance Manual
Engine Protective Devices - Check
3500 Industrial and Generator Set Engines
Magnetic Pickups - Clean/Inspect - If Equipped
3500 Industrial and Generator Set Engines
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
Technical Information Bulletin
Loss Of The Desired Speed Signal During Earth Fault Test
Loss Of The Desired Speed Signal During Earth Fault Test
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Specifications
Magnetic Pickup
SUPPLEMENT FOR UPRATED 3500 ENGINES
Engine Speed Sensor
3500 Generator Set Engines
Engine Speed Sensor
3500 Generator Set Engines
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Systems Operation
Engine Speed Sensor
3500 Engines
Sensors
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL MIST DETECTOR ON 3516, 3516B, 3516C, AND 3516C HD ENGINES
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Product Improvement Program For Replacing The Oil Pressure Sensor To Eliminate Shutdown Due To False Low Oil Pressure Sensor Signals On Certain 3512 And 3516 Standby Engines
Testing and Adjusting
Speed Sensor (Engine) - Adjust
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Magnetic Pickup Test
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines
CID 100 FMI 2 Pressure Sensor (Engine Oil) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 100 FMI 3 Pressure Sensor (Engine Oil) Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 100 FMI 4 Pressure Sensor (Engine Oil) Voltage Below Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 110 FMI 2 Temperature Sensor (Engine Coolant) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 110 FMI 3 Temperature Sensor (Engine Coolant) Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 110 FMI 4 Temperature Sensor (Engine Coolant) Voltage Below Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 111 FMI 3 Fluid Level Sensor (Engine Coolant) Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 269 FMI 3 Sensor Power Supply Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 269 FMI 4 Sensor Power Supply Voltage Below Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Pulse Width Modulated (PWM) Sensor - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 190 FMI 2 Speed Sensor (Engine) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 190 FMI 3 Speed Sensor (Engine) Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Coolant Temperature Sensor - Test
3500 Engines
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
New &quot;Two Inch&quot; Gauges, Indicator And Senders Available{7450}
1986/06/02
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Temperature Sensor Pocket Kit Available For Danfoss&reg; Temperature Contactors {1350,7403}
1989/08/07
New Water Level Gauge Group For Folded Core Radiators{1353,7422,7479}
1989/10/23
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP){4490}
1991/04/08
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Engine News
New Heat Shield For Wiring To Electrical Shutoff Group
1984/10/24
Improved Remote Shutoff Group Has New Pressure Control Group
1985/06/01
Oil Pressure Shutdown Specifications Change For Hydramechanical Shutoff System
1985/12/01
New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group
1989/11/01
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group
1990/12/01
Shorter Rack Shutoff Solenoids Available
1993/02/01
New Shut-Off Solenoid Group And Air Shut-Off Group Used In Air Shut-Off Groups {1078}
1998/02/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Operation and Maintenance Manual
Alarms and Shutoffs
3500 Industrial and Generator Set Engines
Manual Stop Procedure
3500 Industrial and Generator Set Engines
Emergency Stopping
3500 Industrial and Generator Set Engines
Specifications
Shutoff Control Group Identification
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Accessory (Shutoff) Drive Group
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Shutoff Control Group
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Air Intake Shutoff
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Remote Shutoff Valve Group
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Manual Shutoff
3500 Generator Set Engines
Air Shutoff Solenoid
3500 Generator Set Engines
Fuel Shutoff Solenoid
3500 Generator Set Engines
Service Magazine
Quadrants Improved In Governor Control Groups{1265,1264}
1984/05/21
New Heat Shield For Wiring To Electrical Shutoff Group{7400,7403,7418}
1984/10/29
Improved Remote Shutoff Group Has New Pressure Control Group{1050,1078,1085}
1985/05/13
Oil Pressure Shutdown Specifications Change For Hydramechanical Shutoff System{1085}
1985/11/25
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel {0315,7418}
1988/11/28
New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group{7418,1078}
1989/10/23
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
Shorter Rack Shutoff Solenoids Available {1259}
1993/03/01
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Engine News
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Adjust Bosch Solenoid If Replaced Or Reinstalled
1988/01/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay)
1989/08/01
Air Starter Relay Valve Improved
1991/07/01
Shorter Rack Shutoff Solenoids Available
1993/02/01
New Shut-Off Solenoid Group And Air Shut-Off Group Used In Air Shut-Off Groups {1078}
1998/02/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Specifications
Fuel Shutoff Solenoid
3500 Generator Set Engines
Systems Operation
Starting Solenoid
3500 Engines
Service Magazine
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay){1426,1450}
1989/07/24
Air Starter Relay Valve Improved{1462}
1991/06/24
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box{1423,1422}
1992/11/09
Shorter Rack Shutoff Solenoids Available {1259}
1993/03/01
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Shorter Rack Shutoff Solenoids Available {1259}
1993/03/01
Operation and Maintenance Manual
Automatic Start/Stop - Inspect - Generator Set
3500 Industrial and Generator Set Engines
Engine News
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
New Ether Starting Aid Groups Available
1990/12/01
Operation and Maintenance Manual
Cold Weather Starting
3500 Industrial and Generator Set Engines
Special Instruction
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Specifications
Ether Starting Aid
3500 Generator Set Engines
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Ether Starting Aid Groups Available{1456}
1990/12/17
Engine Updates Help Prevent Piston Seizures{1214,1252,1265,1274,1355,1383,1393,1456}
1991/05/13
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Engine Shuts Down Immediately After Start-Up {7400}
1985/10/21
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Cold Weather Starting{1213,1250,1274,1450}
1988/02/22
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Air Starter Relay Valve Improved{1462}
1991/06/24
Engine News
New Air Starting Motor Has A Slip-Clutch Type Drive Gear
1983/10/26
Improved Valve Used In Air Starting Lines Groups
1984/06/20
New Air Start And Override Valve Has Stronger Mounting
1984/06/20
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors
1984/12/12
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors
1985/02/01
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Testing The Starter On The Engine
1987/05/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay)
1989/08/01
Air Starter Relay Valve Improved
1991/07/01
New Starting Motors Used {1453}
2002/05/01
Improved Remanufactured Electric Starting Motors are Now Available {1453}
2003/11/01
A New Starter Drive is Used on Air Starting Motors {1451}
2006/01/02
Operation and Maintenance Manual
Air Tank Moisture and Sediment - Drain
3500 Industrial and Generator Set Engines
Air Starting Motor Lubricator Bowl - Clean
3500 Industrial and Generator Set Engines
Air Starting Motor Lubricator Oil Level - Check
3500 Industrial and Generator Set Engines
Starting Motor - Inspect
3500 Industrial and Generator Set Engines
Cold Weather Starting
3500 Industrial and Generator Set Engines
Starting the Engine
3500 Industrial and Generator Set Engines
Air Starting Motor - Inspect
3500 Industrial and Generator Set Engines
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Solenoid (Starting Motor) &minus; Replace{1467}
Solenoid (Starting Motor) − Replace{1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Air Starting Motor
3500 Generator Set Engines
Air Starting Motor Pressure Regulating Valve
3500 Generator Set Engines
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Electric Starting Motor
3500 Generator Set Engines
Starting Motor
Starting Motor - Delco 50-MT
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor
3500 Engines
Component Description
Starting Motor - Delco 50-MT
General Information
Starting Motor - Delco 50-MT
Normal Operation
Starting Motor - Delco 50-MT
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL AIR STARTER COVERAGE FOR CERTAIN 3508/B, 3512/B/C, 3516/B/C, 3524B ENGINE MODELS AND CERTAIN 784C, 785C/D, 789C, 793C/D, 797/B, 994F
CAT REMAN ANNOUNCES ADDITIONAL AIR STARTER COVERAGE FOR CERTAIN 3508/B, 3512/B/C, 3516/B/C, 3524B ENGINE MODELS AND CERTAIN 784C, 785C/D, 789C, 793C/D, 797/B, 994F
Testing and Adjusting
Engaged Starting Motor - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Electric Starting System
3500 Engines
Pinion Clearance Adjustment
3500 Engines
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Pressure Regulating Valve
3500 Engines
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Magnetic Switch - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT
Field Winding - Test
Starting Motor - Delco 50-MT
Armature - Test
Starting Motor - Delco 50-MT
Brush and Brush Holder - Check
Starting Motor - Delco 50-MT
Pinion Drive - Check
Starting Motor - Delco 50-MT
No Load - Test
Starting Motor - Delco 50-MT
Pinion Clearance - Adjust
Starting Motor - Delco 50-MT
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT
Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT
Disassembly and Assembly
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Starting Motor - Disassemble
Starting Motor - Delco 50-MT
Starting Motor - Assemble
Starting Motor - Delco 50-MT
Air Starting Motor - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Air Starting Motor - Assemble
3508, 3512 and 3516 Generator Set Engines
Air Regulator - Remove and Install - Air Starting
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
New Air Starting Motor Has A Slip-Clutch Type Drive Gear{1451}
1983/10/17
Improved Valve Used In Air Starting Lines Groups{1451}
1984/05/21
New Air Start And Override Valve Has Stronger Mounting{1451}
1984/06/11
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors{1319}
1984/12/10
Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors{1319}
1985/02/11
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay){1426,1450}
1989/07/24
Air Starter Relay Valve Improved{1462}
1991/06/24
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Engine News
Water Level Switch Improved
1986/11/01
Check For Dirt Before Replacing Pyrometer Switch
1987/01/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay)
1989/08/01
Improvements Reduce Vibration To The Low Water Level Switch On Expansion Tanks
1990/08/01
New Programmable Logic Control With In-Phase Monitor For Contactor Type Automatic Transfer Switches{4469}
1996/05/09
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Specifications
Electrical Switches
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Magnetic Switch
3500 Generator Set Engines
Coolant Temperature Switch
3500 Generator Set Engines
Temperature Switch
3500 Generator Set Engines
Temperature Switch
3500 Generator Set Engines
Pressure Switch
3500 Generator Set Engines
Pressure Switch
3500 Generator Set Engines
Testing and Adjusting
Overspeed Verification Test
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines
Overspeed Calibration
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines
Crank Terminate Speed Calibration
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines
Oil Step Speed Calibration
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines
Diode Test
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines
Engine Oil Pressure Switch Test
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines
Water Temperature Contactor Switch Test
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Water Level Switch Improved{1354,1350}
1986/10/13
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Generator Sets Wired For Use With Customer-Supplied Switch Gear; Do Not Run Without Switch Gear{7002,7400}
1987/01/19
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Shock Mounts Give Longer Life To 9F3099 Switch Assembly (Starter Relay){1426,1450}
1989/07/24
Improvements Reduce Vibration To The Low Water Level Switch On Expansion Tanks{7422,1354}
1990/07/23
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box{1423,1422}
1992/11/09
New Programmable Logic Control With In-Phase Monitor For Contactor Type Automatic Transfer Switches {4469}
1996/04/01
Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
2009/08/03
Operation and Maintenance Manual
Air Tank Moisture and Sediment - Drain
3500 Industrial and Generator Set Engines
Engine News
New Address For Repair Of Diagnostic Tools
1982/06/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
5P957 And 5P3514 Coolant And Battery Tester
1987/04/01
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
4C4213 Insulation Tester for Electrical Power Generation
1989/12/01
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
2002/08/01
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U-8860 Large Engine Blowby Pickup Group{0781, 0785}
Using the 1U-8860 Large Engine Blowby Pickup Group{0781, 0785}
Tool Operating Manual
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Test Tools for the Electrical System
3500 Engines
Troubleshooting
Service Tools
HDB Series and M1 Series Heavy Duty Brushless Alternators
Service Tools
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Tools
Starting Motor - Delco 50-MT
Service Magazine
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
4C4213 Insulation Tester for Electrical Power Generation{0785}
1989/12/11
Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25
Two New Tools Check Tension on Engine Belts {0701, 0767}
2004/05/03
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Service Letter-NACD
Product Improvement Program For Replacing The Isolation Transformer On Certain 3508, 3512, And 3516 Engines Powering SR4B Generators
Product Improvement Program For Replacing The Isolation Transformer On Certain 3508, 3512, And 3516 Engines Powering SR4B Generators
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
3300V/2400V Primary Taps Have Not Been Capped When The Third Transformer Is Installed For Use With EMCPII+ Control Panels
3300V/2400V Primary Taps Have Not Been Capped When The Third Transformer Is Installed For Use With EMCPII+ Control Panels
Power Transformer Failures Due to Overburden of the Medium Voltage Power Transformers
Power Transformer Failures Due to Overburden of the Medium Voltage Power Transformers
Overburdened Power Transformers Can Lead to Power Transformer Failures
Overburdened Power Transformers Can Lead to Power Transformer Failures
Service Letter-China
Product Improvement Program For Replacing The Isolation Transformer On Certain 3508, 3512, And 3516 Engines Powering SR4B Generators
Product Improvement Program For Replacing The Isolation Transformer On Certain 3508, 3512, And 3516 Engines Powering SR4B Generators
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Droop Transformer
SR4 GENERATOR (THREE PHASE FULL WAVE EXCITATION & REGULATION
Excitation Transformers
SR4 GENERATOR (THREE PHASE FULL WAVE EXCITATION & REGULATION
Engine News
A New Screen is Used in the 1L-2073 Pressure Reducing Valve {1462}
2004/07/01
Specifications
Thermostatic Pilot Valve<BR> (4L7108)
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Testing and Adjusting
Pressure Regulating Valve
3500 Engines
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New Heat Shield For Wiring To Electrical Shutoff Group{7400,7403,7418}
1984/10/29
Wiring Harness Conduit Component Sizes{1400,1408}
1985/02/04
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up {4450}
1986/07/28
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.