AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3516 GENERATOR SET ENGINE 25Z00001-00683 OPERATOR STATION Caterpillar SIS



GEN SET ENGINE 3516 GEN SET ENGINE 25Z
 3516 GENERATOR SET ENGINE 25Z00001-00683 SEBP1390 3516 25Z   (1982)

Parts group 3516:

  For full view, you need register
OPERATOR STATION
INDICATOR GP
INDICATOR GP-FILTER CHANGE
8N-8511 INDICATOR GP-FILTER CHANGE
8N8511 FUEL FILTER CHANGE INDICATOR GROUP
SERIAL NO. 25Z1 TO 25Z458 INCLUSIVE
FOR USE WITH 4 HOLE PANEL AND STANDARD FUEL FILTER SYSTEM
AN ATTACHMENT
INDICATOR GP-FILTER CHANGE
7N-6782 INDICATOR GP-FILTER CHANGE
7N6782 AIR FILTER CHANGE INDICATOR GROUP
CANNOT BE USED WITH PREMIUM INSTRUMENT PANEL. AN ATTACHMENT
INDICATOR GP-FILTER CHANGE
8N-8512 INDICATOR GP-FILTER CHANGE
8N8512 FUEL FILTER CHANGE INDICATOR GROUP-R.H.
SERIAL NO. 25Z1 TO 25Z458 INCLUSIVE
FOR USE WITH 4 HOLE PANEL AND DUPLEX FUEL FILTER SYSTEM
AN ATTACHMENT
MISCELLANEOUS INFORMATION
FASTENER GP
1W-8109 FASTENER GP
1W8109 DIFFERENTIAL LINES FASTENER GROUP-R.H.-OIL & FUEL FILTER
CANNOT BE USED WITH ELECTRIC SHUT-OFF
AN ATTACHMENT
PANEL GP
INDICATOR GP-SPEED
2W-0789 INDICATOR GP-SPEED
2W789 SPEED INDICATOR GROUP
PART OF 1W4860 WOODWARD GOVERNOR GROUP SHOWN ON PAGE 196D
AN ATTACHMENT
PANEL GP-INSTRUMENT
7N-6966 PANEL GP-INSTRUMENT
7N6966 INSTRUMENT PANEL GROUP-4 HOLE R.H.
SERIAL NO. 25Z1 TO 25Z458 INCLUSIVE
8N5715 FILM IS AVAILABLE.
AN ATTACHMENT
PANEL GP-INSTRUMENT
5N-2191 PANEL GP-INSTRUMENT
5N2191 INSTRUMENT PANEL GROUP-12 HOLE-R.H.-TYPE 1
FOR USE WITH JACKET WATER AFTERCOOLED ENGINES. 5N8289-PAGE 311
NOTE: 3N7830 PLATE IS AVAILABLE.
AN ATTACHMENT
PANEL GP-INSTRUMENT
5N-2191 PANEL GP-INSTRUMENT
5N2191 INSTRUMENT PANEL GROUP-TYPE 2
SERIAL NO. 25Z1 TO 25Z458 INCLUSIVE
5N8289-PAGE 311
AN ATTACHMENT
PANEL GP-INSTRUMENT
4W-6887 PANEL GP-INSTRUMENT
4W6887 INSTRUMENT PANEL GROUP-PREMIUM-16 HOLE
SERIAL NO. 25Z459-UP
4W4527-PAGE 310.03
AN ATTACHMENT
PANEL GP-INSTRUMENT
4W-4527 PANEL GP-INSTRUMENT
4W4527 INSTRUMENT PANEL GROUP-PREMIUM-16 HOLE
SERIAL NO. 25Z459-UP
5N8291-PAGE 310.04
PART OF 4W6887 INSTRUMENT PANEL. AN ATTACHMENT
BOX GP-INSTRUMENT PANEL
5N-8291 BOX GP-INSTRUMENT PANEL
5N8291 INSTRUMENT PANEL BOX GROUP
SERIAL NO. 25Z459-UP
PART OF 4W4527 INSTRUMENT PANEL
AN ATTACHMENT
PANEL GP-INSTRUMENT
4W-5309 PANEL GP-INSTRUMENT
4W5309 INSTRUMENT PANEL GROUP-8 HOLE
SERIAL NO. 25Z459-UP
4W4526-PAGE 310B
AN ATTACHMENT
PANEL GP-INSTRUMENT
4W-4526 PANEL GP-INSTRUMENT
4W4526 INSTRUMENT PANEL GROUP
SERIAL NO. 25Z459-UP
3N9015-PAGE 310C
PART OF 4W5309 INSTRUMENT PANEL. AN ATTACHMENT
BOX GP-INSTRUMENT PANEL
3N-9015 BOX GP-INSTRUMENT PANEL
3N9015 INSTRUMENT PANEL BOX GROUP
SERIAL NO. 25Z459-UP
PART OF 4W4526 INSTRUMENT PANEL
AN ATTACHMENT
PANEL GP-INSTRUMENT
5N-8289 PANEL GP-INSTRUMENT
5N8289 INSTRUMENT PANEL GROUP
PART OF 5N2191 INSTRUMENT PANEL GROUP SHOWN ON PAGE 310
3N8268 BOX PARTS ARE SHOWN ON PAGE 312. AN ATTACHMENT
COVER GP-INSTRUMENT PANEL
3N-9016 COVER GP-INSTRUMENT PANEL
3N9016 INSTRUMENT PANEL COVER GROUP
AN ATTACHMENT
BOX GP-INSTRUMENT PANEL
3N-8268 BOX GP-INSTRUMENT PANEL
3N8268 INSTRUMENT PANEL BOX GROUP
PART OF 5N8289 INSTRUMENT PANEL GROUP SHOWN ON PAGE 311
AN ATTACHMENT
MOUNTING GP-INSTRUMENT PANEL
1W-8106 MOUNTING GP-INSTRUMENT PANEL
1W8106 MOUNTING GP-INSTRUMENT PANEL
12 HOLE-S/N 25Z1-458
FOR USE WITH PREMIUM PANEL
AN ATTACHMENT
MOUNTING GP-INSTRUMENT PANEL
4W-6803 MOUNTING GP-INSTRUMENT PANEL
4W6803 MOUNTING GP-INSTRUMENT PANEL
S/N 25Z459-UP
AN ATTACHMENT
MOUNTING GP-INSTRUMENT PANEL
1W-8108 MOUNTING GP-INSTRUMENT PANEL
1W8108 INSTRUMENT PANEL MOUNTING GROUP
SERIAL NO. 25Z1 TO 25Z459 INCLUSIVE
FOR USE WITH 4 HOLE PANEL. CANNOT BE USED WITH 8N8360 AIR COMPRESSOR
& 1W7768 FUMES DISPOSAL. AN ATTACHMENT
MOUNTING GP-INSTRUMENT PANEL
4W-5310 MOUNTING GP-INSTRUMENT PANEL
4W5310 INSTRUMENT PANEL MOUNTING GROUP-8 HOLE-TYPE 1
SERIAL NO. 25Z459-UP
AN ATTACHMENT
MOUNTING GP-INSTRUMENT PANEL
4W-5310 MOUNTING GP-INSTRUMENT PANEL
4W5310 INSTRUMENT PANEL MOUNTING GROUP-8 HOLE-TYPE 2
SERIAL NO. 25Z459-UP
AN ATTACHMENT
MOUNTING GP-INSTRUMENT PANEL
4W-5310 MOUNTING GP-INSTRUMENT PANEL
4W5310 INSTRUMENT PANEL MOUNTING GROUP-8 HOLE-TYPE 3
SERIAL NO. 25Z459-UP
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
1W-8119 LINES GP-INSTRUMENT PANEL
1W8119 INSTRUMENT PANEL LINES GROUP-FUEL FILTER DIFFERENTIAL-L.H.
SERIAL NO. 25Z1 TO 25Z458 INCLUSIVE
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
4W-5995 LINES GP-INSTRUMENT PANEL
4W5995 INSTRUMENT PANEL LINES GROUP-FUEL FILTER DIFFERENTIAL-L.H.
SERIAL NO. 25Z459-UP
NOT FOR USE WITH FRONT MOUNTED BREATHER
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
1W-8101 LINES GP-INSTRUMENT PANEL
1W8101 INSTRUMENT PANEL LINES GROUP-R.H.-TYPE 1
FOR USE WITH PREMIUM PANEL AND STANDARD R.H. & DUPLEX OIL LINES
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
1W-8101 LINES GP-INSTRUMENT PANEL
1W8101 INSTRUMENT PANEL LINES GROUP-R.H.-TYPE 2
FOR USE WITH PREMIUM PANEL AND STANDARD R.H. & DUPLEX OIL FILTERS
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
1W-8102 LINES GP-INSTRUMENT PANEL
1W8102 INSTRUMENT PANEL LINES GROUP-R.H.-TYPE 1
FOR USE WITH STANDARD R.H. & DUPLEX OIL FILTERS
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
1W-8102 LINES GP-INSTRUMENT PANEL
1W8102 INSTRUMENT PANEL LINES GROUP-R.H.-TYPE 2
FOR USE WITH STANDARD R.H. & DUPLEX OIL FILTERS
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
1W-8103 LINES GP-INSTRUMENT PANEL
1W8103 INSTRUMENT PANEL LINES GROUP-R.H.
SERIAL NO. 25Z1 TO 25Z458 INCLUSIVE
FOR USE WITH PREMIUM PANEL AND STANDARD FUEL FILTER SYSTEM
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
4W-6463 LINES GP-INSTRUMENT PANEL
4W6463 INSTRUMENT PANEL LINES GROUP-FUEL FILTER DIFFERENTIAL-R.H.
NOT FOR USE WITH FRONT MOUNTED BREATHER
SERIAL NO. 25Z459-UP
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
2W-8372 LINES GP-INSTRUMENT PANEL
2W8372 INSTRUMENT PANEL LINES GROUP-R.H.
SERIAL NO. 25Z459-UP
NOT FOR USE WITH FRONT MOUNTED BREATHER
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
4W-6464 LINES GP-INSTRUMENT PANEL
4W6464 INSTRUMENT PANEL LINES GROUP
SERIAL NO. 25Z459-UP
NOT FOR USE WITH FRONT MOUNTED BREATHER
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
2W-8369 LINES GP-INSTRUMENT PANEL
2W8369 INSTRUMENT PANEL LINES GROUP-L.H.
SERIAL NO. 25Z459-UP
NOT FOR USE WITH FRONT MOUNTED BREATHER
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
2W-3517 LINES GP-INSTRUMENT PANEL
2W3517 INSTRUMENT PANEL LINES GROUP-FUEL FILTER DIFFERENTIAL-R.H.
SERIAL NO. 25Z1 TO 25Z458 INCLUSIVE
FOR USE WITH PREMIUM PANEL
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
2W-8373 LINES GP-INSTRUMENT PANEL
2W8373 INSTRUMENT PANEL LINES GROUP-FUEL FILTER DIFFERENTIAL-R.H.
SERIAL NO. 25Z459-UP
NOT FOR USE WITH FRONT MOUNTED BREATHER
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
1W-8104 LINES GP-INSTRUMENT PANEL
1W8104 INSTRUMENT PANEL LINES GROUP-R.H.
FOR USE WITH PREMIUM PANEL. AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
1W-8110 LINES GP-INSTRUMENT PANEL
1W8110 INSTRUMENT PANEL LINES GROUP-OIL FILTER DIFFERENTIAL-L.H.
REPLACED BY 4W5509-PAGE 320A
FOR USE WITH 1W8108 INSTRUMENT PANEL MOUNTING, 8N6358 OIL FILTER &
8N6355 FUEL FILTER. AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
4W-5509 LINES GP-INSTRUMENT PANEL
4W5509 INSTRUMENT PANEL LINES GROUP-OIL FILTER DIFFERENTIAL-L.H.
FOR USE WITH 4W1749 OIL FILTER & BASIC INSTRUMENT PANEL
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
4W-5510 LINES GP-INSTRUMENT PANEL
4W5510 INSTRUMENT PANEL LINES GROUP-OIL FILTER DIFFERENTIAL-L.H.
FOR USE WITH 4W1749 OIL FILTER & PREMIUM INSTRUMENT PANEL
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
1W-8116 LINES GP-INSTRUMENT PANEL
1W8116 INSTRUMENT PANEL LINES GROUP-AIR CLEANER RESTRICTION-L.H.-TYPE 1
FOR USE WITH PREMIUM PANEL, 1W8106 MOUNTING, 8N6355 AND 8N6358 FILTERS
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
1W-8116 LINES GP-INSTRUMENT PANEL
1W8116 LINES GROUP-INSTRUMENT PANEL-AIR CLEANER RESTRICTION-L.H.-TYPE 2
FOR USE WITH PREMIUM PANEL,1W8106 MOUNTING,8N6355 & 8N6358 FILTERS
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
1W-8118 LINES GP-INSTRUMENT PANEL
1W8118 INSTRUMENT PANEL LINES GROUP-OIL FILTER DIFFERENTIAL-L.H.
REPLACED BY 4W5510-PAGE 320B
FOR USE WITH PREMIUM PANEL, 1W8106 MOUNTING, 8N6355 & 8N6458 FILTERS
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
2W-8587 LINES GP-INSTRUMENT PANEL
2W8587 LINES GP-INSTRUMENT PANEL
FUEL FILTER DIFFERENTIAL-L.H.-12 HOLE PANEL-S/N 25Z1-458
FOR USE WITH R.H. DUPLEX FUEL FILTER SYSTEM AND L.H. INSTRUMENT PANEL
PREMIUM REQUIRES SIDE MOUNTED BREATHER AND FUMES DISPOSAL. AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
2W-8371 LINES GP-INSTRUMENT PANEL
2W8371 LINES GP-INSTRUMENT PANEL
FUEL FILTER DIFFERENTIAL-L.H.-S.N 25Z459-UP
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
4W-5230 LINES GP-INSTRUMENT PANEL
4W5230 INSTRUMENT PANEL LINES GROUP-OIL FILTER DIFFERENTIAL-L.H.
REPLACED BY 2W8370-PAGE 322D
SERIAL NO. 25Z1 TO 25Z458 INCLUSIVE
FOR USE WITH DUPLEX OIL FILTERS & BASIC INSTRUMENT PANEL. AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
4W-5231 LINES GP-INSTRUMENT PANEL
4W5231 INSTRUMENT PANEL LINES GROUP-OIL FILTER DIFFERENTIAL-L.H.
REPLACED BY 2W8370-PAGE 322D
FOR USE WITH DUPLEX OIL FILTERS & PREMIUM INSTRUMENT PANEL
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
2W-8370 LINES GP-INSTRUMENT PANEL
2W8370 INSTRUMENT PANEL LINES GROUP-OIL FILTER DIFFERENTIAL-L.H.
SERIAL NO. 25Z459-UP
FOR USE WITH 4W1552 FILTER GROUP
NOT FOR USE WITH FRONT MOUNTED BREATHER
LINES GP-INSTRUMENT PANEL
7W-3294 LINES GP-INSTRUMENT PANEL
7W3294 INSTRUMENT PANEL LINES GROUP-OIL FILTER DIFFERENTIAL-R.H.
SERIAL NO. 25Z459-UP
FOR USE WITH DUPLEX FUEL & STANDARD OIL COMBINATION
NOT FOR USE WITH FRONT MOUNTED BREATHER. AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
4W-6462 LINES GP-INSTRUMENT PANEL
4W6462 INSTRUMENT PANEL LINES GROUP-OIL FILTER DIFFERENTIAL-R.H.
SERIAL NO. 25Z459-UP
FOR USE WITH 4W1747 & 4W1552 FILTERS
NOT FOR USE WITH FRONT MOUNTED BREATHER. AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
4W-5994 LINES GP-INSTRUMENT PANEL
4W5994 INSTRUMENT PANEL LINES GROUP-OIL FILTER DIFFERENTIAL-L.H.
SERIAL NO. 25Z459-UP
FOR USE WITH 4W1747 FILTER
NOT FOR USE WITH FRONT MOUNTED BREATHER
LINES GP-INSTRUMENT PANEL
4W-5985 LINES GP-INSTRUMENT PANEL
4W5985 INSTRUMENT PANEL LINES GROUP
SERIAL NO. 25Z459-UP
NOT FOR USE WITH FRONT MOUNTED BREATHER
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
8N-5721 LINES GP-INSTRUMENT PANEL
8N5721 INSTRUMENT PANEL LINES GROUP
FOR USE WITH PREMIUM PANEL. AN ATTACHMENT
METER GP-SERVICE
7W-6942 METER GP-SERVICE
7W6942 METER GP-SERVICE
FIELD INSTALLATION
METER GP-SERVICE
7W-7158 METER GP-SERVICE
7W7158 METER GP-SERVICE
FIELD INSTALLATION
METER GP-SERVICE
7W-7157 METER GP-SERVICE
7W7157 METER GP-SERVICE
FIELD INSTALLATION
METER GP-SERVICE
7N-1893 METER GP-SERVICE
7N1893 SERVICE METER GROUP-VIEWABLE FROM L.H. SIDE
AN ATTACHMENT
METER GP-SERVICE
7N-7466 METER GP-SERVICE
7N7466 SERVICE METER GROUP
SERIAL NO. 25Z1 TO 25Z491 INCLUSIVE
FOR SAE STANDARD ENGINE ROTATION
METER GP-SERVICE
2W-9592 METER GP-SERVICE
2W9592 SERVICE METER GROUP
SERIAL NO. 25Z492-UP
METER GP-SERVICE
2W-9593 METER GP-SERVICE
2W9593 SERVICE METER GROUP
SERIAL NO. 25Z492-UP
AN ATTACHMENT
MOUNTING GP-INSTRUMENT PANEL
4W-0156 MOUNTING GP-INSTRUMENT PANEL
4W0156 INSTRUMENT MOUNTING GROUP-SERVICE METER
SERIAL NO. 25Z459-UP
FOR USE WITH 2W9593 SERVICE METER & PREMIUM INSTRUMENT PANELS
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
7W-3295 LINES GP-INSTRUMENT PANEL
7W3295 INSTRUMENT PANEL LINES GROUP-R.H.-FUEL FILTER DIFFERENTIAL
FOR USE WITH DUPLEX FUEL & STANDARD OIL COMBINATION. NOT FOR USE
WITH FRONT MOUNTED BREATHER GROUP
AN ATTACHMENT
LINES GP-INSTRUMENT PANEL
7W-3296 LINES GP-INSTRUMENT PANEL
7W3296 INSTRUMENT PANEL LINES GROUP
NOT FOR USE WITH FRONT MOUNTED BREATHER GROUP. FOR USE WITH DUPLEX
FUEL & STANDARD OIL COMBINATION
AN ATTACHMENT
MOUNTING GP-INSTRUMENT PANEL
8N-4606 MOUNTING GP-INSTRUMENT PANEL
8N4606 INSTRUMENT MOUNTING GROUP-AMMETER
FOR USE WITH 4 HOLE PANEL AND REQUIRED WITH ALTERNATOR. AN ATTACHMENT
GAUGE GP
5L-9895 GAUGE GP
5L9895 GAUGE GP
(24 OR 32 VOLT-OIL PRESSURE & WATER TEMPERATURE) TYPE 1
AN ATTACHMENT
GAUGE GP-AMMETER
3N-9012 GAUGE GP-AMMETER
3N9012 AMMETER GAUGE GROUP
PART OF 7N7981, 7N7986 & 4W6085 ALTERNATORS
AN ATTACHMENT
GAUGE GP
5L-9895 GAUGE GP
5L9895 GAUGE GP
(24 OR 32 VOLT-OIL PRESSURE & WATER TEMPERATURE) TYPE 2
AN ATTACHMENT
PYROMETER GP
3N-8275 PYROMETER GP-TWIN
3N8275 PYROMETER GROUP-TWIN
3N8276 PYROMETER GROUP-SINGLE
REFER TO CHART SHOWN ON PAGE 332 FOR USAGE
AN ATTACHMENT
TACHOMETER GP
DRIVE GP-TACHOMETER
8N-1471 DRIVE GP-TACHOMETER
8N1471 TACHOMETER AND SERVICE METER DRIVE GROUP-TYPE 1
REFER TO CHART SHOWN ON PAGE 287 FOR USAGE
AN ATTACHMENT
DRIVE GP-TACHOMETER
8N-5823 DRIVE GP-TACHOMETER
8N5823 TACHOMETER AND SERVICE METER DRIVE GROUP-L.H.
SERIAL NO. 25Z1 TO 25Z491 INCLUSIVE
8N5619-PAGE 325. REFER TO 5N5382 CHART-PAGE 287
AN ATTACHMENT
DRIVE GP-TACHOMETER
8N-1471 DRIVE GP-TACHOMETER
8N1471 TACHOMETER AND SERVICE METER DRIVE GROUP-TYPE 2
REFER TO 5N5382 CHART-PAGE 287
AN ATTACHMENT
DRIVE GP-TACHOMETER
8N-5619 DRIVE GP-TACHOMETER
8N5619 TACHOMETER AND SERVICE METER DRIVE GROUP-R.H. MOUNT
SERIAL NO. 25Z1 TO 25Z491 INCLUSIVE
PART OF 8N5823 TACHOMETER AND SERVICE METER DRIVE. FOR L.H. MOUNT
ONLY WHEN HYDRO-MECHANICAL SHUT-OFF IS USED. ALSO AN ATTACHMENT
TACHOMETER GP-ELECTRIC
5N-9037 TACHOMETER GP-ELECTRIC
5N9037 ELECTRIC TACHOMETER GROUP
FOR USE WITH SAE "00" FLYWHEEL HOUSING, PREMIUM PANEL AND
4 HOLE PANEL WITH MOUNTING. AN ATTACHMENT
MOUNTING GP-TACHOMETER
8N-4636 MOUNTING GP-TACHOMETER
8N4636 TACHOMETER MOUNTING GROUP
FOR USE WITH 4 HOLE PANEL AND REQUIRED WITH TACHOMETER
AN ATTACHMENT
ALARM GP
ALARM GP
2W-4476 ALARM GP
2W4476 ALARM GROUP
AN ATTACHMENT
ALARM GP
2W-5421 ALARM GP
2W5421 ALARM GROUP
AN ATTACHMENT
CHART-ALARM SYSTEM
5N-5382 CHART-ALARM SYSTEM
5N5382 HYDRA-MECHANICAL SHUT-OFF ALARM SYSTEM CHART
AN ATTACHMENT

Information:

(For parts list, see above)

Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Service Magazine
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2002/07/08
Two New Tools Check Tension on Engine Belts {0701, 0767}
2004/05/03
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
Returning Core Engines For Full Refund {0374}
1995/02/20
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Improved Start Switch Used{1416}
1987/05/25
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Special Instruction
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Engine News
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel
1988/12/01
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP)
1991/04/01
Unwanted Engine Shutdown Caused By "01" And/Or "04" Diagnostic; New "09" Diagnostic Available With 8T9881-8 Electronic Control Module (ECM)
1991/05/01
Service Letter-NACD
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel {0315,7418}
1988/11/28
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP){4490}
1991/04/08
Unwanted Engine Shutdown Caused By "01" And/Or "04" Diagnostic; New "09" Diagnostic Available With 8T9881-8 Electronic Control Module (ECM){4490}
1991/05/13
Troubleshooting 04 Diagnostic Code On Electronic Modular Control Panels (EMCP){4490,4450}
1992/05/11
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Disassembly and Assembly
Tachometer Drive - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Service Magazine
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2002/07/08
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Engine News
Air Filter Indicator Maintenance
1993/10/01
New Air Filter Restriction Indicator Now Reads 25 Inches Maximum{7452,1051}
1995/06/01
Service Magazine
New "Two Inch" Gauges, Indicator And Senders Available{7450}
1986/06/02
Air Filter Indicator Maintenance{7452}
1993/10/25
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Engine News
Instrument Panels Improved
1984/08/22
List Of Mechanical Service Meters For Earlier 3500 Series Engines Using Mechanical Service Meters
1985/10/01
Check For Plugged Orifices In Mechanical Pressure Gauges
1987/03/01
New Digital Tachometers Available As Attachments
1990/07/01
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP)
1991/04/01
Service Letter-NACD
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Systems Operation
ETS Junction Box-Switchgear Required (OP,WT,OS)
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines
ETR Junction Box-Switchgear Required (OP,WT,OS)
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines
Service Letter-APD
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Service Magazine
New Mechanical Service Meter Used{7478}
1984/07/16
Instrument Panels Improved{7450}
1984/08/20
Differential Oil Pressure Gauge For Oil Filter Shows High Differential Pressure{1300,1306,1315}
1985/04/08
New Clamp Added To Right Hand Instrument Panel Fuel Filter Differential Lines Group{7451,7456,7450}
1985/05/06
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Engine Shuts Down Immediately After Start-Up {7400}
1985/10/21
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Use Improved Heat Start Switch{1416}
1987/04/20
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Improved Start Switch Used{1416}
1987/05/25
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel {0315,7418}
1988/11/28
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Two Remote Instrument Panels Available: Conventional and EMCP{7002}
1989/10/30
4C4213 Insulation Tester for Electrical Power Generation{0785}
1989/12/11
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP){4490}
1991/04/08
Unwanted Engine Shutdown Caused By "01" And/Or "04" Diagnostic; New "09" Diagnostic Available With 8T9881-8 Electronic Control Module (ECM){4490}
1991/05/13
Troubleshooting 04 Diagnostic Code On Electronic Modular Control Panels (EMCP){4490,4450}
1992/05/11
Air Filter Indicator Maintenance{7452}
1993/10/25
Returning Core Engines For Full Refund {0374}
1995/02/20
Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Special Instruction
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}
Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
General Service Information
Electrostatic Discharge Awareness
INSTALLATION AND OPERATION LOAD SHARING MODULE
Chapter 1 - General Information
INSTALLATION AND OPERATION LOAD SHARING MODULE
Chapter 2 - Installation
INSTALLATION AND OPERATION LOAD SHARING MODULE
Chapter 3 - Setup and Calibration
INSTALLATION AND OPERATION LOAD SHARING MODULE
Chapter 4 - Theory Of Operation
INSTALLATION AND OPERATION LOAD SHARING MODULE
Chapter 5 - Troubleshooting
INSTALLATION AND OPERATION LOAD SHARING MODULE
Appendix A. - LSM Control Specifications
INSTALLATION AND OPERATION LOAD SHARING MODULE
Appendix B. - Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
INSTALLATION AND OPERATION LOAD SHARING MODULE
Appendix C. - EMI Control in Electronic Governing Systems
INSTALLATION AND OPERATION LOAD SHARING MODULE
Engine News
Digital Tachometer Available
1983/08/17
New Mechanical Service Meter Used
1984/07/11
Instrument Panels Improved
1984/08/22
List Of Mechanical Service Meters For Earlier 3500 Series Engines Using Mechanical Service Meters
1985/10/01
Generator Sets Wired For Use With Customer-Supplied Switch Gear; Do Not Run Without Switchgear
1987/01/01
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed
1987/05/01
New Oil Pressure Sender Assembly Used
1988/11/01
Improved Pressure Gauge Sender Used
1988/12/01
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel
1988/12/01
Temperature Sensor Pocket Kit Available For Danfoss&reg; Temperature Contactors
1989/08/01
Two Remote Instrument Panels Available: Conventional and EMCP
1989/11/01
New Digital Tachometers Available As Attachments
1990/07/01
New Ether Starting Aid Groups Available
1990/12/01
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP)
1991/04/01
Unwanted Engine Shutdown Caused By &quot;01&quot; And/Or &quot;04&quot; Diagnostic; New &quot;09&quot; Diagnostic Available With 8T9881-8 Electronic Control Module (ECM)
1991/05/01
Air Filter Indicator Maintenance
1993/10/01
New NFPA 110 Remote Annunciator Panel {4490,7002}
1995/05/01
New Air Filter Restriction Indicator Now Reads 25 Inches Maximum{7452,1051}
1995/06/01
Changes To EMCP I Control Panel{4450}
1996/11/01
New Exhaust Manifold Sections Contain A Port To Install Temperature Sensors {1059,1921}
1997/02/17
Changes To Default Overcurrent Settings For EMCP II+ {4490}
1997/08/01
Instrument Panel Lines Groups Changed In Order To Improve Mounting Of The Fumes Disposal Group{1071}
1997/09/15
Flexible Hose Assembly Replaces Tube Assemblies In Instrument Panel Lines Groups{7451}
1997/10/10
New Customer Communication Module Has Improved Communication Capabilities{1926}
1998/12/01
Updated Owners Manual For Customer Communication Module (CCM) Available{1926}
1998/12/01
Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming and Spare Fault Operation{4490}
1999/04/01
Correction to Testing and Adjusting Module, SENR5832, Electronic Modular Control Panel II+ (EMCPII+) for MUI Engines {4490}
2000/12/01
A New Service Support Center Is Available For The Products That Are Assembled At The Large Engine Center {1000, 4490, 7002, 7274}
2001/09/01
Improved Troubleshooting Procedures for EMCPII, EMCPII+, and EMCPII+P Annunciators {4490}
2001/10/01
Correction to Testing and Adjusting, &quot;Electronic Modular Control Panel II+ (EMCPII+) for MUI Engines&quot; {4490}
2002/02/01
New EMCP 3.2/3.3 Software Is Now Available For Use On Certain Cat<SUP>&reg;</SUP> Products {4490, 7620}
2014/11/14
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Engine Air Cleaner Service Indicator - Inspect
3500 Industrial and Generator Set Engines
Instrument Panel - Inspect
3500 Industrial and Generator Set Engines
Control Panel Voltmeter - Check
SR4 HV and SR4B HV Generators
Control Panel
3500 Industrial and Generator Set Engines
Gauges and Indicators
3500 Industrial and Generator Set Engines
Alarms and Shutoffs
3500 Industrial and Generator Set Engines
Special Instruction
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 7W6942, 7W7157 and 7W7158 Electric Service Meter Groups{7478}
Installation Of 7W6942, 7W7157 and 7W7158 Electric Service Meter Groups{7478}
Instruction For Mounting The Electronic Modular Control Panel II In A Remote Location{4490}
Instruction For Mounting The Electronic Modular Control Panel II In A Remote Location{4490}
Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490}
Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490}
Replacing the Transformer in the Automatic Transfer Switch{4469}
Replacing the Transformer in the Automatic Transfer Switch{4469}
Installation Instructions for the 9W-1494 Service Meter Kit {7478}
Installation Instructions for the 9W-1494 Service Meter Kit {7478}
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Generator Set Control (GSC) and AC Transformer Box (ATB) Replacement{4490}
Generator Set Control (GSC) and AC Transformer Box (ATB) Replacement{4490}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Service Letter-NACD
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RELAY IN CERTAIN 3400 AND 3500 SERIES GENERATOR SET ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RELAY IN CERTAIN 3400 AND 3500 SERIES GENERATOR SET ENGINES
Service Letter-Australia
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
Service Letter-CFEL
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
Service Letter-CSARL
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RELAY IN CERTAIN 3400 AND 3500 SERIES GENERATOR SET ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RELAY IN CERTAIN 3400 AND 3500 SERIES GENERATOR SET ENGINES
Service Letter-Americas
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RELAY IN CERTAIN 3400 AND 3500 SERIES GENERATOR SET ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RELAY IN CERTAIN 3400 AND 3500 SERIES GENERATOR SET ENGINES
Service Letter-Brazil
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
EMCP NFPA 99 Ran Annunciator Modules Will Not Perform As Specified
EMCP NFPA 99 Ran Annunciator Modules Will Not Perform As Specified
3300V/2400V Primary Taps Have Not Been Capped When The Third Transformer Is Installed For Use With EMCPII+ Control Panels
3300V/2400V Primary Taps Have Not Been Capped When The Third Transformer Is Installed For Use With EMCPII+ Control Panels
EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490}
EMCP3 Charge-Fail False Alarm At High Temperatures and Low Temperatures{4490}
Specifications
Tachometer And Service Meter Drive
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Tachometer
3500 Generator Set Engines
Ammeter
3500 Generator Set Engines
Ammeter
3500 Generator Set Engines
Pressure Gauge
3500 Generator Set Engines
Pressure Gauge - Engine Oil
3500 Generator Set Engines
Pressure Gauge - Hydraulic Oil
3500 Generator Set Engines
Temperature Gauge
3500 Generator Set Engines
Temperature Gauge
3500 Generator Set Engines
Tachometer Drive
3500 Generator Set Engines
Service Letter-China
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
Service Letter-Asia
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
Systems Operation
Normal Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Engine/Generator Programming OP5
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Hourmeter Programming OP7
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Component Location
Electronic Modular Control Panel II (EMCP II) For MUI Engines
EMCP Electronic Control (Generator Set)
Electronic Modular Control Panel II (EMCP II) For MUI Engines
AC Offset Adjustment OP10
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Relay Driver Module
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Alarm Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Shutdown Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Mode
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Fault Log Viewing OP1
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Engine/Generator Setpoint Viewing OP2
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Password Entry OP3
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Fault Log Clearing OP4
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Voltmeter/Ammeter Programming OP8
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Modes Of Operation
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Diagnostic Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Data Link
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Fault Description
Electronic Modular Control Panel II (EMCP II) For MUI Engines
General Information
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Instrument Panel
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Spare Input/Output Programming OP6
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Engine Setpoint Verification OP9
Electronic Modular Control Panel II (EMCP II) For MUI Engines
AL Fault Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines
SP Fault Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Letter-APD
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Replacing The Electronic Control Group (Temperature/Pressure) On Certain 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, 3606 SI, And 3612 SI Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
Product Support Program For Installing Improved Software In Certain 3208, 3304, 3306B, 3406C, 3412, 3508, 3508B, 3512, 3512B, G3512, 3516 And 3516B Generator Set Engines
Testing and Adjusting
Indicator for Engine Overspeed - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Troubleshooting Undiagnosed Problems
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Zero Display of Voltage or Current - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
AC Voltage Range - Adjust
Electronic Modular Control Panel II (EMCP II) For MUI Engines
EMCP Electronic Control (Generator Set) - Replace
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Relay Module - Replace
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 268 FMI 2 EMCP Electronic Control (Generator Set) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 442 FMI 12 Generator Fault Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 500 FMI 12 EMCP Electronic Control (Generator Set) Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Block Diagram of Generator Set Control
Electronic Modular Control Panel II (EMCP II) For MUI Engines
General Information
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Connector Contact Identification of Generator Set Control
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Fault Identification
Electronic Modular Control Panel II (EMCP II) For MUI Engines
AL Fault Code - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Troubleshooting Dedicated Shutdown Indicators
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for Low Oil Pressure - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for High Water Temperature - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for Low Coolant Level - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Record
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Troubleshooting Diagnostic Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 248 FMI 9 CAT Data Link Abnormal Update - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 330 FMI 7 Unexpected Shutdown Improper Mechanical Response - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 566 FMI 7 Unexpected Shutdown Improper Mechanical Response - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 331 FMI 2 Switch (Engine Control) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 336 FMI 2 Switch (Engine Control) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 334 FMI 3 Spare Output Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 334 FMI 4 Spare Output Voltage Below Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 443 FMI 12 Crank Termination Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 444 FMI 12 Starting Motor Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 445 FMI 12 Run Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 446 FMI 12 Air Shutoff Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 447 FMI 12 Fuel Control Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 560 FMI 11 CAT Data Link Failure Mode Not Identified - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
SP Fault Code - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for Emergency Stop - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Indicator for Overcrank - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
No Engine Shutdown - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Erratic GSC Operation - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Inaccurate Display of Voltage or Current - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Coolant Temperature Sensor - Test
3500 Engines
Indicators for Engine Oil Pressure
3500 Engines
CID 441 FMI 12 Electronic Governor Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Symbols
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Typical Generator Abbreviations
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Electrical Gauge - Test - Water Temperature
3500 Engines
Mechanical Gauge - Test - Water Temperature
3500 Engines
Mechanical Gauge - Test
3500 Engines
Service Magazine
Digital Tachometer Available{7462}
1983/08/15
New Mechanical Service Meter Used{7478}
1984/07/16
Instrument Panels Improved{7450}
1984/08/20
Differential Oil Pressure Gauge For Oil Filter Shows High Differential Pressure{1300,1306,1315}
1985/04/08
New Clamp Added To Right Hand Instrument Panel Fuel Filter Differential Lines Group{7451,7456,7450}
1985/05/06
List Of Mechanical Service Meters For Earlier 3500 Series Engines Using Mechanical Service Meters{1286}
1985/09/23
Meter Panel Cover Folds Down Completely {7451}
1985/11/04
New Instruction Films (Decals) Available {7405,7451}
1985/11/04
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
New &quot;Two Inch&quot; Gauges, Indicator And Senders Available{7450}
1986/06/02
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Potentiometer Can Be Used In Place Of Temperature Probe For Demonstration Of Electronic Modular Control Panel {0315,7418}
1988/11/28
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Temperature Sensor Pocket Kit Available For Danfoss&reg; Temperature Contactors {1350,7403}
1989/08/07
Two Remote Instrument Panels Available: Conventional and EMCP{7002}
1989/10/30
New Digital Tachometers Available As Attachments{7462}
1990/06/18
New Ether Starting Aid Groups Available{1456}
1990/12/17
Remote Mounted Pressure Sensor Used In Temperature And Pressure Control Group In Electronic Modular Control Panel (ECMP){4490}
1991/04/08
Unwanted Engine Shutdown Caused By &quot;01&quot; And/Or &quot;04&quot; Diagnostic; New &quot;09&quot; Diagnostic Available With 8T9881-8 Electronic Control Module (ECM){4490}
1991/05/13
Troubleshooting 04 Diagnostic Code On Electronic Modular Control Panels (EMCP){4490,4450}
1992/05/11
New Engine Control Module For EMCP Now Available{4450,4490}
1992/07/27
Air Filter Indicator Maintenance{7452}
1993/10/25
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming And Spare Fault Operation {4490}
1998/11/23
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
Engine News
Check For Dirt Before Replacing Pyrometer Switch
1987/01/01
Service Magazine
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
New 12 Volt AM/FM Radios Are Available {7338}
2000/03/20
Special Instruction
Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped {7323, 7325}
Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped {7323, 7325}
Technical Information Bulletin
Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS) {7323, 7325, 7715}
Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS) {7323, 7325, 7715}
Engine News
Digital Tachometer Available
1983/08/17
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
New Digital Tachometers Available As Attachments
1990/07/01
New Electronic Tachometers Have Different Connection To Wiring Harness {7462}
2001/08/01
Specifications
Tachometer And Service Meter Drive
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Tachometer
3500 Generator Set Engines
Tachometer Drive
3500 Generator Set Engines
Service Magazine
Digital Tachometer Available{7462}
1983/08/15
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
New Digital Tachometers Available As Attachments{7462}
1990/06/18
Special Instruction
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U-8860 Large Engine Blowby Pickup Group{0781, 0785}
Using the 1U-8860 Large Engine Blowby Pickup Group{0781, 0785}
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Testing and Adjusting
Service Tools
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Magazine
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
4C4213 Insulation Tester for Electrical Power Generation{0785}
1989/12/11
Two New Tools Check Tension on Engine Belts {0701, 0767}
2004/05/03
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Systems Operation
Alarm Module Control (NFPA 110)
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Alarm Module Control (Custom)
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Synchronizing Lights Module
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Synchronizing Lights Module With Reverse Power Relay
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Alarm Modules
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Testing and Adjusting
Alarm Module Control - Adjust
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 333 FMI 3 Alarm Module Control Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
CID 333 FMI 4 Alarm Module Control Voltage Below Normal - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Magazine
New Heat Shield For Wiring To Electrical Shutoff Group{7400,7403,7418}
1984/10/29
Engine Shuts Down Immediately After Start-Up {7400}
1985/10/21
Generator Sets Wired For Use With Customer-Supplied Switch Gear; Do Not Run Without Switch Gear{7002,7400}
1987/01/19
Systems Operation
Customer Interface Module
Electronic Modular Control Panel II (EMCP II) For MUI Engines
System Communication Module (Customer)
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Testing and Adjusting
Alarm Module or Remote Annunciator - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
EMCP Electronic Control (AC Transformer Box) - Replace
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Magazine
Worldwide Service Directories Available For Marine, Petroleum, Power Generation Products{0354,0370,0374,0375,1022,4450}
1989/08/14
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.