4W9110 TURBOCHARGER GROUP 2W8331-PAGE 179D PART OF 2W7695 TURBOCHARGER AN ATTACHMENT 3516 GEN SET ENGINE

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP

0. 4W-9110 TURBOCHARG
1. 2W-8331 CARTRIDGE
2. 2W-1644 CARTRIDGE
3. 2W-7224 CARTRIDGE

MANIFOLD GP-EXHAUST

4. 1W-5936 MANIFOLD G
5. 1W-5937 MANIFOLD G
6. 1W-5937 MANIFOLD G
7. 1W-5937 MANIFOLD G

EXHAUST GP

8. 2W4074 MUFFLER IS AVAILABLE. FOR USE WITH ALL EXHAUST SYSTEM ATTACHMENT
GROUPS THAT CONFORM TO 14" MODULAR EXHAUST SYSTEM. AN ATTACHMENT" class=""> 2W-7756 FLANGE GP-
9. 1W3392 MUFFLER ARE AVAILABLE. AN ATTACHMENT" class=""> 1W-9488 FLANGE GP-
0. INFORMATION

GEN SET ENGINE 3516 GEN SET ENGINE 25Z
3516 GENERATOR SET ENGINE 25Z00001-00683 SEBP1390 3516 25Z (1982)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP

4W-9058 TURBOCHARGER GP

2W-8325 TURBOCHARGER GP

4W-9110 TURBOCHARGER GP

2W-8331 CARTRIDGE GP-TURBOCHARGER

2W-1644 CARTRIDGE GP-TURBOCHARGER

2W-7224 CARTRIDGE GP-TURBOCHARGER

#SEBP13900400

4W-9110: TURBOCHARGER GP

TURBOCHARGER GP

4W9110 TURBOCHARGER GROUP
2W8331-PAGE 179D
PART OF 2W7695 TURBOCHARGER
AN ATTACHMENT

c322660 SEBP1390

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-7223	[1]	HOUSING-COMPRESSOR (COMPRESSOR)
2.	1W-4795	[1]	NAMEPLATE
3.	8H-3710	[4]	SCREW-TAPPING
4.	2W-7219	[1]	DIFFUSER
5.	2B-2695	[8]	BOLT (COMPRESSOR)
6.	3B-4505	[8]	LOCKWASHER
7.	2W-8331 Y	[1]	CARTRIDGE GP-TURBOCHARGER
8.	2W-1248	[4]	CLAMP
9.	2W-1266	[1]	RING-RETAINER (RETAINER)
10.	4W-7249	[1]	HOUSING-TURBINE (TURBINE)
11.	4W-9132	[1]	NOZZLE-TURBINE (TURBINE)
12.	6V-5682	[8]	BOLT-HIGH TEMP
13.	9L-3899	[8]	LOCK
14.	2W-1351	[4]	CLAMP (COMPRESSOR)
15.	6V-4297	[1]	SEAL-O-RING
	Y		SEPARATE ILLUSTRATION

#SEBP13900401

2W-8331: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

2W8331 CARTRIDGE GROUP
PART OF 2W8325, 4W9058 & 4W9110 TURBOCHARGERS
ALSO AN ATTACHMENT

c322665 SEBP1390

2W8331 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-1940 J	[1]	WASHER-RETAINING
2.	2W-1241	[1]	RING-CARRIER
3.	2W-1249	[1]	RING-RETAINER
4.	2W-1349	[1]	INSERT-COMPRESSOR
5.	6V-6353 J	[1]	SEAL-O-RING
6.	2W-1350	[1]	SHROUD-HEAT
7.	2W-1267	[1]	SHROUD-HEAT
8.	2W-1233 J	[2]	BEARING-JOURNAL
9.	2W-1234 J	[1]	RING-SEAL
10.	2W-8332	[1]	SHAFT & WHEEL AS
11.	2W-1984 J	[4]	RING-RETAINER
12.	2W-1261	[1]	HOUSING-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	2W-1231 J	[1]	BEARING-THRUST
15.	2W-1232	[1]	RING-THRUST
16.	2W-1240 CJ	[1]	RING-SEAL
17.	2W-7222	[1]	WHEEL-COMPRESSOR
18.	2W-1268 J	[1]	NUT-RETAINER
19.	8H-3128 C	[3]	BOLT-SOCKET HEAD
	3B-4504	[3]	LOCKWASHER
20.	6L-2244	[1]	PIN
			THE FOLLOWING REPAIR
			KIT IS AVAILABLE:
	4W-5736 C	[1]	KIT-CARTRIDGE REPAIR (INCLUDES
			PARTS MARKED J)
			INSTRUCTIONS)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP13900402

2W-1644: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

2W1644 CARTRIDGE GROUP-TURBOCHARGER
PART OF 1W6007, 1W6008, 1W7645 AND 1W7646 TURBOCHARGER GROUPS SHOWN ON
PAGES 178 AND 179

c320836 SEBP1390

2W1644 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-1940 Z	[1]	WASHER-RETAINING
2.	2W-1241	[1]	RING-CARRIER
3.	2W-1249	[1]	RING-RETAINER
4.	2W-1349	[1]	INSERT-COMPRESSOR
5.	6V-6353 Z	[1]	SEAL-O-RING
6.	2W-1350	[1]	SHROUD-HEAT
7.	2W-1267	[1]	SHROUD-HEAT
8.	2W-1233 Z	[2]	BEARING-JOURNAL
9.	2W-1234 Z	[1]	RING-SEAL
10.	2W-1181	[1]	SHAFT & WHEEL AS
11.	2W-1984 Z	[4]	RING-RETAINER
12.	2W-1261	[1]	HOUSING-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	2W-1231 Z	[1]	BEARING-THRUST
15.	2W-1232	[1]	RING-THRUST
16.	2W-1240 CZ	[1]	RING-SEAL
17.	2W-1298	[1]	WHEEL-COMPRESSOR
18.	2W-1268 Z	[1]	NUT-RETAINER
19.	8H-3128 C	[3]	BOLT-SOCKET HEAD
	3B-4504	[3]	LOCKWASHER
20.	6L-2244 C	[1]	PIN
	6V-4297 AZ	[1]	SEAL-O-RING
			THE FOLLOWING REPAIR
			KIT IS AVAILABLE:
	4W-5736 C	[1]	KIT-CARTRIDGE REPAIR (CARTRIDGE)
			(INCLUDES PARTS MARKED Z)
	CZ	[1]	FORM
			CARTRIDGE REPAIR KIT)
	A		NOT PART OF THIS GROUP
	C		CHANGE FROM PREVIOUS TYPE
	Z		NOT SERVICED SEPARATELY

#SEBP13900403

2W-7224: CARTRIDGE GP-TURBOCHARGER

CARTRIDGE GP-TURBOCHARGER

2W7224 CARTRIDGE GROUP
PART OF 2W7214, 2W7215, 2W7216 AND 2W7217 TURBOCHARGER GROUP SHOWN ON
PAGES 179A AND 179B. AN ATTACHMENT

c313608 SEBP1390

2W7224 CARTRIDGE GP-TURBOCHARGER Parts scheme

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-1940 K	[1]	WASHER-RETAINING
2.	2W-1241	[1]	RING-CARRIER
3.	2W-1249	[1]	RING-RETAINER
4.	2W-1349	[1]	INSERT-COMPRESSOR
5.	6V-6353 K	[1]	SEAL-O-RING
6.	2W-1350	[1]	SHROUD-HEAT
7.	2W-1267	[1]	SHROUD-HEAT
8.	2W-1233 K	[2]	BEARING-JOURNAL
9.	2W-1234 K	[1]	RING-SEAL
10.	2W-1181	[1]	SHAFT & WHEEL AS
11.	2W-1984 K	[4]	RING-RETAINER
12.	2W-1261	[1]	HOUSING-BEARING
13.	2W-1250	[1]	RING-THRUST
14.	2W-1231 K	[1]	BEARING-THRUST
15.	2W-1232	[1]	RING-THRUST
16.	2W-1240 CK	[1]	RING-SEAL
17.	2W-7222	[1]	WHEEL-COMPRESSOR
18.	2W-1268 K	[1]	NUT-RETAINER
19.	6V-5683 C	[3]	BOLT
	3B-4504	[3]	LOCKWASHER
20.	6L-2244	[1]	PIN
			THE FOLLOWING REPAIR
			KIT IS AVAILABLE:
	4W-5736	[1]	KIT-CARTRIDGE REPAIR
			(TURBOCHARGER CARTRIDGE)
			(INCLUDES PARTS MARKED K)
			(CARTRIDGE KIT)
	C		CHANGE FROM PREVIOUS TYPE
	K		SEE MAST AR OR LIFT GP

#SEBP13900404

1W-5936: MANIFOLD GP-EXHAUST

MANIFOLD GP-EXHAUST

1W5936 EXHAUST MANIFOLD GROUP

c548802 SEBP1390

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-3843	[1]	BRACKET-LH
2.	1W-3842	[1]	BRACKET-RH
3.	0S-1595	[5]	BOLT
4.	5P-1076	[9]	WASHER-HARD
5.	3B-1915	[64]	BOLT
	5M-2894	[64]	WASHER
6.	1D-4719	[4]	NUT
7.	7N-4906	[1]	MANIFOLD-EXHAUST
8.	1W-5499	[14]	SLEEVE-EXHAUST MANIFOLD
9.	7N-4905	[12]	MANIFOLD-EXHAUST
10.	0S-1587	[4]	BOLT
11.	3H-6740	[56]	BOLT
	2N-2766 C	[56]	LOCKNUT
12.	1W-5318	[1]	MANIFOLD-EXHAUST-LH
13.	7N-4909	[1]	MANIFOLD-EXHAUST
14.	1W-5317	[1]	MANIFOLD-EXHAUST-RH
15.	5M-6213 J	[4]	PLUG
16.	7W-8145	[16]	GASKET-EXHAUST MANIFOLD

			J-USED ON MANIFOLDS
			WITH TAPPED HOLES
	C		CHANGE FROM PREVIOUS TYPE

#SEBP13900405

1W-5937: MANIFOLD GP-EXHAUST

MANIFOLD GP-EXHAUST

1W5937 EXHAUST MANIFOLD GROUP-MARINE AUXILIARY
SERIAL NO. 25Z1 TO 25Z437 INCLUSIVE
ALSO PART OF 1W8580 AND 2W7722 TURBOCHARGER ARRANGEMENT LISTED ON PAGE 175

c301515 SEBP1390

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-0551	[3]	PLUG
2.	1W-7752	[1]	MANIFOLD ASSEM
3.	1D-4706	[32]	BOLT
4.	0L-2070	[32]	BOLT
5.	1W-7753	[1]	MANIFOLD ASSEM
6.	5B-7890	[4]	PLUG
7.	7N-8606	[16]	GASKET
8.	5M-2894	[64]	WASHER

#SEBP13900406

1W-5937: MANIFOLD GP-EXHAUST

MANIFOLD GP-EXHAUST

1W5937 MANIFOLD GP-EXHAUST
TYPE 1- S/N 25Z438-UP
PART OF 1W8580 & 2W7722 TURBOCHARGERS
AN ATTACHMENT

c337966 SEBP1390

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-0551 C	[4]	PLUG
2.	4W-1695 C	[1]	MANIFOLD AS.(R.H.)
3.	1D-4706	[32]	BOLT
4.	0L-2070	[32]	BOLT
5.	4W-1696 C	[1]	MANIFOLD AS.(L.H.)
6.	5B-7890	[4]	PLUG
7.	7N-8606	[16]	GASKET
8.	5M-2894 C	[66]	WASHER
9.	0S-1591 C	[2]	BOLT
	9S-8752 C	[2]	NUT
	9L-9132 C	[2]	WASHER
10.	4W-3049 C	[1]	BRACKET
11.	6H-1717 C	[2]	BOLT
	5P-8245 C	[2]	WASHER
	C		INDICATES CHANGE

#SEBP13900407

1W-5937: MANIFOLD GP-EXHAUST

MANIFOLD GP-EXHAUST

1W5937 MANIFOLD GP-EXHAUST
TYPE 2- S/N 25Z438-UP
PART OF 1W8580 & 2W7722 TURBOCHARGERS
AN ATTACHMENT

c351783 SEBP1390

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-0551	[4]	PLUG-PIPE
2.	4W-1695	[1]	MANIFOLD AS (R.H.)
3.	1D-4706	[32]	BOLT
4.	0L-2070	[32]	BOLT
5.	4W-1696	[1]	MANIFOLD AS (L.H.)
6.	0L-1351 C	[2]	BOLT
7.	7N-8606	[16]	GASKET-EXHAUST MANIFOLD
8.	5M-2894	[66]	WASHER
9.	0S-1591	[2]	BOLT
	1D-4717	[2]	NUT
10.	4W-3049	[1]	BRACKET
11.	6H-1717 C	[4]	BOLT
	5P-1076 C	[4]	WASHER-HARD
12.	7C-0700 C	[1]	BRACKET AS
13.	9L-9132 C	[4]	WASHER
	C		CHANGE FROM PREVIOUS TYPE

#SEBP13900408

2W-7756: FLANGE GP-EXHAUST

FLANGE GP-EXHAUST

2W7756 EXHAUST FLANGE GROUP-355.6 MM (14") MODULAR
2W4074 MUFFLER IS AVAILABLE. FOR USE WITH ALL EXHAUST SYSTEM ATTACHMENT
GROUPS THAT CONFORM TO 14" MODULAR EXHAUST SYSTEM. AN ATTACHMENT

c582375 SEBP1390

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-7755 C	[1]	FLANGE-EXHAUST
2.	111-5822 C	[1]	GASKET-EXHAUST
3.	0S-1590	[12]	BOLT 50.80MM(2.00IN)LG
	1B-5355	[12]	NUT-FULL 14.3MM(.56IN)OD
	5M-2894	[24]	WASHER 18.5MM(.73IN)OD
			-OR-
	9X-8873	[12]	BOLT 57.15MM(2.25IN)LG
	1B-5357	[12]	NUT-FULL 19.05MM(.75IN)OD
	5P-8245	[24]	WASHER 25.5MM(1.0IN)OD
	C		CHANGE FROM PREVIOUS TYPE

#SEBP13900409

1W-9488: FLANGE GP-EXHAUST

FLANGE GP-EXHAUST

1W9488 EXHAUST FLANGE GROUP
FOR USE WITH 355.6 MM (14") PIPE. NOTE: 5N8529 EXHAUST ELBOW AND
1W3392 MUFFLER ARE AVAILABLE. AN ATTACHMENT

c567500 SEBP1390

For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-7579	[1]	FLANGE
2.	1W-7580	[1]	GASKET
3.	0S-1571	[12]	BOLT
	9S-8752	[12]	NUT-FULL
	5M-2894	[12]	WASHER

Information:

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP

Engine News

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22

Improved Turbocharger Oil Drain Elbows
1984/12/12

Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line
1984/12/12

Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger
1986/01/01

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01

Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01

Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01

Turbine Oil Seal Improved On Turbochargers
1988/08/01

Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01

Use Care When Positioning Turbocharger Compressor Housing
1989/05/01

New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak
1990/03/01

New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures
1991/08/01

"Off-Size" Bearing Kits Available
1991/10/01

New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures{1052}
1991/11/01

New Bellows Assemblies Used In Turbocharger Groups
1992/12/01

Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01

Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01

Record Turbocharger Serial Number On Warranty Claims{1052}
1996/02/16

New Turbocharger Turbine Housing Helps Reduce Turbine Inlet Temperatures{1065,1052}
1996/12/18

Improved Clamps For Turbocharger Exhaust Couplings Reduce Exhaust Leaks {1052}
1997/08/01

Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15

Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24

Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05

Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18

New Turbochargers Provide Increased Bearing Life {1052}
2000/03/01

Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01

A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01

New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01

Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01

New Gasket for the Turbocharger Oil Line {1052, 1307}
2004/08/01

Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20

New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30

Packaging the Turbocharger {1052}
2007/02/26

Kits Are Available for Repair of Exhaust Components on Certain 3516 Electric Power Engines with Center-Mounted Exhaust Systems {1052, 1053, 1059, 1061, 1071}
2012/08/23

Cat® Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24

Some Turbochargers and Turbocharger Cartridges are Difficult to Spin Before Lubricating the Center Housing for Certain Engine Applications {1052, 1053}
2015/08/07

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}

Operation and Maintenance Manual

Turbocharger - Inspect
3500 Industrial and Generator Set Engines

Special Instruction

Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}

2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}

4W5736 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}

Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}

Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}

Service Letter-NACD

Product Support Program For Reducing High Exhaust Temperatures On Certain 3516 Four Turbo 50 Hertz Engine Generator Sets
Product Support Program For Reducing High Exhaust Temperatures On Certain 3516 Four Turbo 50 Hertz Engine Generator Sets

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-Australia

Product Support Program For Installing Turbocharger Improvements On Certain 3508, 3512, And 3516 Generator Set Engines Rated For 50HZ (1500 RPM)
Product Support Program For Installing Turbocharger Improvements On Certain 3508, 3512, And 3516 Generator Set Engines Rated For 50HZ (1500 RPM)

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-CFEL

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-CSARL

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-Americas

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-Brazil

Specifications

Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES

Turbochargers (TV72 & TW72) (TV78 & TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES

Turbochargers (TV92 & TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES

Turbochargers (C153 & W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES

Turbocharger
3500 Generator Set Engines

Service Letter-China

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Service Letter-Asia

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Systems Operation

Turbocharger
3500 Engines

Reuse And Salvage Guidelines

Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}

Information Release Memo

REMANUFACTURED TURBOCHARGERS AND CARTRIDGES FOR VARIOUS MACHINES AND ENGINES
REMANUFACTURED TURBOCHARGERS AND CARTRIDGES FOR VARIOUS MACHINES AND ENGINES

CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines
Product Support Program For Replacing The Turbo Exhaust Coupling On Certain 3516 Genset Engines

Disassembly and Assembly

Turbocharger - Remove and Install
3508, 3512 and 3516 Generator Set Engines

Turbocharger - Disassemble
3508, 3512 and 3516 Generator Set Engines

Turbocharger - Assemble
3508, 3512 and 3516 Generator Set Engines

Exhaust Elbow - Remove and Install
3508, 3512 and 3516 Generator Set Engines

Service Magazine

Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28

Improved Turbocharger Oil Drain Elbows{1307,1052}
1984/12/10

Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line{1050,1052,1053}
1984/12/10

Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16

Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger{1059}
1986/01/13

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28

Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07

Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15

Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03

Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09

Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25

Turbine Oil Seal Improved On Turbochargers{1053,1077}
1988/08/08

Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20

Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03

6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10

Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22

Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01

Use Care When Positioning Turbocharger Compressor Housing {1052,1060}
1989/05/01

New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22

New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak{1053,1077}
1990/03/05

New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures {1052}
1991/07/22

New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures{1052}
1991/11/25

New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21

New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18

Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3516 :

2W-8325 TURBOCHARGER GP

4W-9058 TURBOCHARGER GP

2W-7214 TURBOCHARGER GP

2W-7215 TURBOCHARGER GP

1W-7645 TURBOCHARGER GP

1W-7646 TURBOCHARGER GP

1W-6007 TURBOCHARGER GP

1W-6008 TURBOCHARGER GP

2W-8331 CARTRIDGE GP-TURBOCHARGER

2W-1644 CARTRIDGE GP-TURBOCHARGER

2W-7224 CARTRIDGE GP-TURBOCHARGER

1W-5936 MANIFOLD GP-EXHAUST

1W-5937 MANIFOLD GP-EXHAUST

2W-7756 FLANGE GP-EXHAUST

Truck sale:

719,892

Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS

298,989

Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

500,000

Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY

500,000

Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY

800,000

Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC