AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N0338 CAMSHAFT GROUP SERIAL NO. 27Z636 TO 27Z643 INCLUSIVE 3516 INDUSTRIAL ENGINE


BASIC ENGINE
CAMSHAFT GP
PISTON & ROD GP
CYLINDER HEAD GP

INDUSTRIAL ENGINE 3516 INDUSTRIAL ENGINE 27Z
 3516 INDUSTRIAL ENGINE 27Z00001-00649 SEBP1391 3516 27Z   (1982)

BASIC ENGINE

CAMSHAFT GP
CAMSHAFT GP-DOUBLE
8N-0338 CAMSHAFT GP-DOUBLE
CAMSHAFT GP-DOUBLE
8N-0338 CAMSHAFT GP-DOUBLE
CAMSHAFT GP-SINGLE
4W-9716 CAMSHAFT GP-SINGLE
CAMSHAFT GP-SINGLE
7W-1259 CAMSHAFT GP-SINGLE
 

#SEBP13910030
 

8N-0338: CAMSHAFT GP-DOUBLE

8N0338 CAMSHAFT GROUP
SERIAL NO. 27Z636 TO 27Z643 INCLUSIVE
c322409 SEBP1391
8N0338 CAMSHAFT GP-DOUBLE Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-3218 [2] WASHER-THRUST  
2. 0L-1351 [4] BOLT  
3. 8N-9847 [1] CAMSHAFT-REAR-LH (REAR-L.H.)  
4. 7N-3216 [2] SPACER-CAMSHAFT  
5. 8N-9842 [1] CAMSHAFT AS-FRONT (FRONT-L.H.)  
6. 4N-1650 [1] DOWEL  
7. 8N-9844 [1] CAMSHAFT-FRONT-RH (FRONT-R.H.)  
8. 5P-0076 [16] BOLT-12 POINT HEAD  
9. 8N-9843 [1] CAMSHAFT AS-REAR (REAR-R.H.)  
10. 4N-1650 [1] DOWEL  
11. 8N-9991 C [2] PLATE AS-TIMING  
    (EACH INCLUDES)
12. 1T-0679 [1] ROLLER-FREEWHEEL  
13. 0S-0509 C [2] BOLT  
  5M-2894 C [2] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13910031
 

4W-9716: CAMSHAFT GP-SINGLE

4W9716 SINGLE CAMSHAFT GROUP
ENGINE SERIAL NO.27Z644-UP.
c326992 SEBP1391
4W9716 CAMSHAFT GP-SINGLE Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-3218 [2] WASHER-THRUST  
2. 0L-1351 [4] BOLT  
3. 8N-9847 [1] CAMSHAFT-REAR-LH (REAR-L.H.)  
4. 7N-3216 [2] SPACER-CAMSHAFT  
5. 4W-9715 [1] CAMSHAFT AS-LH (FRONT-L.H.)  
6. 4N-1650 [1] DOWEL  
7. 8N-9844 [1] CAMSHAFT-FRONT-RH (FRONT-R.H.)  
8. 5P-0076 [16] BOLT-12 POINT HEAD  
9. 8N-9843 [1] CAMSHAFT AS-REAR (REAR-R.H.)  
10. 4N-1650 [1] DOWEL  
11. 8N-9991 [2] PLATE AS-TIMING  
    (EACH INCLUDES)
12. 1T-0679 [1] ROLLER-FREEWHEEL  
13. 0S-0509 [2] BOLT  
  5M-2894 [2] WASHER  
 

#SEBP13910032
 

7W-1259: CAMSHAFT GP-SINGLE

7W1259 CAMSHAFT GROUP--SINGLE
SERIAL NO. 27Z650-UP.
c342711 SEBP1391
7W1259 CAMSHAFT GP-SINGLE Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-3218 [2] WASHER-THRUST  
2. 0L-1351 [4] BOLT  
3. 7C-0387 [1] CAMSHAFT-REAR-LH  
4. 7N-3216 [2] SPACER-CAMSHAFT  
5. 7C-0385 [1] CAMSHAFT AS-FRONT -L.H.  
6. 4N-1650 [1] DOWEL  
7. 7C-0360 [1] CAMSHAFT-FRONT-RH  
8. 5P-0076 [16] BOLT-12 POINT HEAD  
9. 7C-0382 [1] CAMSHAFT AS-REAR -R.H.  
10. 4N-1650 [1] DOWEL  
11. 4W-6664 [2] PLATE AS-TIMING  
12. 0S-0509 [2] BOLT  
13. 5M-2894 [2] WASHER  
 

#SEBP13910033
 

8N-7952: PISTON & ROD GP

8N7952 CONNECTING ROD & PISTON GROUP-16 REQUIRED
c341223 SEBP1391
8N7952 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-7963 [1] PISTON GP  
  4W-7402 C [1] BODY AS-PISTON  
2. 8N-1233 [1] RING-PISTON (TOP)  
3. 8N-7810 [1] RING-PISTON (INTERMEDIATE)  
4. 7W-2221 C [1] RING (OIL)  
5. 7N-2393 [1] PIN-PISTON  
6. 8N-7296 [2] RETAINER-PIN  
7. 1W-4800 C [1] ROD AS-CONNECTING  
8. 7N-2405 [4] BOLT-CONNECTING ROD  
9. 7N-2043 [1] PIN-DOWEL  
10. 1W-9166 C [1] BEARING-SLEEVE  
11. 7N-2394 [1] BEARING-CONNECTING ROD (STANDARD)  
  1N-4071 BA [1] BEARING-ROD  
    .635MM(.025IN.)U.S.
  1N-4072 BA [1] BEARING-ROD  
    1.27MM(.050IN.)U.S.
  1N-4073 BA [1] BEARING-ROD  
    .254MM(.010IN.)O.S.
  1N-4074 BA [1] BEARING-ROD  
    .635MM(.025IN.)U.S.
    .254MM(.010IN.)O.S.
  1N-4075 BA [1] BEARING-ROD  
    1.27MM(.050IN.)U.S.
    .254MM(.010IN.)O.S.
  1N-3967 BA [1] RING GP-PISTON  
    (CONSISTS OF COMPLETE
    SET OF RINGS FOR
    ONE PISTON)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13910034
 

4W-7573: PISTON & ROD GP

4W7573 ROD & PISTON GROUP-16 REQUIRED
SERIAL NO. 27Z636-UP
FOR USE WITH 3500 STANDBY GENERATOR SETS
AN ATTACHMENT
c322541 SEBP1391
4W7573 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-7402 [1] BODY AS-PISTON  
2. 8N-1233 [1] RING-PISTON (TOP)  
3. 8N-7810 [1] RING-PISTON (INTERMEDIATE)  
4. 8N-1442 [1] RING-PISTON (OIL)  
5. 4W-7403 [1] PIN-PISTON  
6. 8N-7296 [2] RETAINER-PIN  
7. 1W-4800 [1] ROD AS-CONNECTING  
8. 7N-2405 [4] BOLT-CONNECTING ROD  
9. 7N-2043 [1] PIN-DOWEL  
10. 1W-9166 [1] BEARING-SLEEVE  
11. 1W-7538 [1] BEARING-CONNECTING ROD (STANDARD)  
  4W-5709 A [1] BEARING-CONNECTING ROD .635MM(.025IN)U.S.  
  4W-5710 A [1] BEARING-CONNECTING ROD 1.27MM(.050IN)U.S.  
  4W-5711 A [1] BEARING-CONNECTING ROD .254MM(.010IN)O.S.  
  4W-5712 A [1] BEARING-CONNECTING ROD .635MM(.025IN)U.S.  
    .254MM(.010IN)O.S.
  4W-5713 A [1] BEARING-CONNECTING ROD 1.27MM(.050IN)U.S.  
    .254MM(.010IN)O.S.
  A   NOT PART OF THIS GROUP
 

#SEBP13910035
 

7W-1988: PISTON & ROD GP

7W1988 CONNECTING ROD & PISTON GROUP
SERIAL NO. 27Z650-UP.
c469504 SEBP1391
7W1988 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-7402 [1] BODY AS-PISTON  
2. 8N-1233 [1] RING-PISTON (TOP)  
3. 8N-7810 [1] RING-PISTON (INTERMEDIATE)  
4. 7W-2221 [1] RING (OIL)  
5. 4W-7403 [1] PIN-PISTON  
6. 8N-7296 [2] RETAINER-PIN  
7. 8N-6020 [1] ROD AS-CONNECTING  
8. 7N-2405 [4] BOLT-CONNECTING ROD  
9. 7N-2043 [1] PIN-DOWEL  
10. 1W-9166 [1] BEARING-SLEEVE  
11. 1W-7538 [1] BEARING-CONNECTING ROD  
  4W-5709 A [1] BEARING-CONNECTING ROD .63MM(.025IN)U.S.  
  4W-5710 A [1] BEARING-CONNECTING ROD 1.27MM(.05IN)U.S.  
  4W-5711 A [1] BEARING-CONNECTING ROD .25MM(.01IN)O.S.  
  4W-5712 A [1] BEARING-CONNECTING ROD .63MM(.025IN)U.S.  
    .25MM(.01IN)O.S.
  4W-5713 A [1] BEARING-CONNECTING ROD 1.27MM(.05IN)U.S.  
    .25MM(.01IN)O.S.
   
   
  1N-3967 A [1] RING GP-PISTON  
    (CONSISTS OF COMPLETE
    SET OF RINGS FOR
    ONE PISTON)
  A   NOT PART OF THIS GROUP
 

#SEBP13910036
 

8N-7173: CYLINDER HEAD GP

8N7173 CYLINDER HEAD GROUP-16 REQUIRED
SERIAL NO. 27Z1 TO 27Z633 INCLUSIVE
8N7172-PAGE 19
c228876 SEBP1391
8N7173 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 [1] PLUG  
2. 7N-1961 [6] BOLT  
3. 5P-8248 [8] WASHER  
4. 0L-2070 [2] BOLT  
  5M-2894 [2] WASHER  
5. 7N-1899 [1] GASKET  
6. 7N-1901 [1] BOLT  
7. 8N-7172 RY [1] HEAD GROUP  
    (Separate Illustration)
8. 8N-6862 [4] SEAL  
9. 8N-6863 [4] SEAL  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13910037
 

8N-7172: CYLINDER HEAD GP

8N7172 CYLINDER HEAD GROUP*R
SERIAL NO. 27Z1 TO 27Z633 INCLUSIVE
PART OF 8N7173 CYLINDER HEAD
c316963 SEBP1391
8N7172 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [8] LOCK-RETAINER  
2. 7N-7964 [4] ROTOCOIL AS  
3. 7N-1903 [4] SPRING-VALVE INNER  
4. 7N-1904 [4] SPRING-VALVE OUTER  
5. 2W-2662 [4] WASHER  
6. 1N-3968 [1] CYLINDER HEAD AS-SERIAL  
7. 7N-1902 [2] DOWEL  
8. 9S-8002 C [4] PLUG-O-RING  
  3J-7354 [4] SEAL-O-RING  
9. 3B-0623 [6] PLUG-CUP  
10. 3P-1896 [3] PLUG-CUP  
11. 1W-1801 [4] INSERT-VALVE SEAT  
12. 4D-0514 [1] PLUG-PIPE  
13. 7N-1819 [4] GUIDE-VALVE  
14. 4B-4845 C [2] PLUG  
15. 1W-3359 J [4] VALVE-EXHAUST & INLET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13910038
 

2W-5803: CYLINDER HEAD GP

2W5803 CYLINDER HEAD GROUP-16 REQUIRED
2W5802-PAGE 19B
c334749 SEBP1391
2W5803 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 [1] PLUG-PIPE  
2. 7N-1961 [6] BOLT  
3. 5P-8248 [8] WASHER-HARD  
4. 0L-2070 [2] BOLT  
  5M-2894 [2] WASHER  
5. 7N-1899 [1] GASKET-HEAD  
6. 7N-1901 [2] BOLT  
7. 2W-5802 YR [1] CYLINDER HEAD GP  
8. 8N-6862 [4] SEAL-WATER  
9. 8N-6863 [4] SEAL-WATER  
10. 4D-0514 CB [1] PLUG-PIPE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13910039
 

2W-5802: CYLINDER HEAD GP

2W5802 CYLINDER HEAD GROUP*R
SERIAL NO. 27Z634-UP
PART OF 2W5803 CYLINDER HEAD
c310390 SEBP1391
2W5802 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3516 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9P-1977 [2] BRACKET ASSEM.  
2. 0S-1588 [4] BOLT  
  1D-4717 [4] NUT  
3. 5P-1075 [4] WASHER (conical)  
4. 0S-0509 [8] BOLT  
5. 9P-1970 [4] LATCH ASSEM.  
6. 9M-5884 [4] BUMPER  
7. 8M-1019 [4] SPRING  
8. 9P-1964 [4] PLATE ASSEM.  
    (Each Includes)
  9F-2978 [1] NUT  
9. 9P-1976 [4] PIN  
  3B-4617 [4] COTTER PIN  
  5B-9628 C [4] WASHER  
10. 5P-7513 D SEAL .875 m (34.44 in.)  
11. 7G-1785 [1] PLATE ASSEM.  
    (Includes)
  9F-2978 [3] NUT  
12. 7G-1744 [1] PLATE  
13. 7G-1786 [1] PLATE ASSEM.  
    (Includes)
  9F-2978 [3] NUT  
14. 9P-2262 [1] SEAL  
15. 5P-7513 D SEAL 1.23 m (48.74 in.)  
16. 5M-2894 [12] WASHER  
  D   ORDER BY THE METER
 

Information:

Engine News
New Camshafts Used In SAE Standard [CCW] Rotation Engines
1985/05/01
New Camshaft Installation Tools Available
1985/09/01
New 8T2998 Lubricant Available
1986/03/01
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment
1986/06/01
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes
1990/06/01
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/11/01
New Sleeve Bearing Used In Camshaft Idler Gear Assembly In Rear Gear Groups{1206}
1995/11/20
New Components In Camshaft Groups Provide Increased Lubrication To Thrust Washer Assembly{1210}
1996/05/09
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
New Cover Seals are Available {1107, 1201, 1210}
2003/05/01
Quality of Remanufactured Camshafts {1210}
2003/07/01
Procedure for Installing the Camshaft Drive Gear {1212}
2005/12/12
Remanufactured Camshaft and Lifter Kits Are Available for Certain 3500B Engines {1209, 1210}
2013/10/11
Specifications
Camshafts
SUPPLEMENT FOR UPRATED 3500 ENGINES
Camshaft
3500 Industrial Engines
Systems Operation
Camshaft
3500 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500 Industrial Engines
Camshaft Timing
3500 Industrial Engines
Disassembly and Assembly
CAMSHAFTS
3500 INDUSTRIAL ENGINE
CAMSHAFT BEARINGS, CRANKSHAFT
3500 INDUSTRIAL ENGINE
Service Magazine
New Camshafts Used In SAE Standard [CCW] Rotation Engines{1200,1210}
1985/04/22
New Camshaft Installation Tools Available{0600}
1985/08/19
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes{1209}
1990/06/04
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
1993/11/09
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09

Caterpillar Parts SIS Catalog 3516 :

CAMSHAFT GP-DOUBLE
8N-0338 CAMSHAFT GP-DOUBLE
SEAL GP-CRANKSHAFT
7N-1854 SEAL GP-CRANKSHAFT
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
MOUNTING GP-HYD PUMP DRIVE
4W-5823 MOUNTING GP-HYD PUMP DRIVE
MOUNTING GP-HYD PUMP DRIVE
7W-0283 MOUNTING GP-HYD PUMP DRIVE
MOUNTING GP-HYD PUMP DRIVE
8N-8441 MOUNTING GP-HYD PUMP DRIVE
CAMSHAFT GP-SINGLE
4W-9716 CAMSHAFT GP-SINGLE
CAMSHAFT GP-SINGLE
7W-1259 CAMSHAFT GP-SINGLE
PISTON & ROD GP
8N-7952 PISTON & ROD GP
PISTON & ROD GP
4W-7573 PISTON & ROD GP
PISTON & ROD GP
7W-1988 PISTON & ROD GP
CYLINDER HEAD GP
8N-7173 CYLINDER HEAD GP
CYLINDER HEAD GP
8N-7172 CYLINDER HEAD GP
CYLINDER HEAD GP
2W-5803 CYLINDER HEAD GP

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.