WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)AUGER GP
GROUND ENGAGING TOOLS (G.E.T.)
SERVICE EQUIPMENT AND SUPPLIES
SHIPPING GPGASKET & SEAL KITS
CHARTS & FILMS
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)#SEBP13990100
217-4654: EDGE-CUTTING
217-4654 EDGE-CUTTING
FIELD INSTALLATION
FIELD INSTALLATION
Parts for your 651E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP13990101
286-2030: EDGE-CUTTING
Parts for your 651E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP13990102
348-0290: EDGE-CUTTING
348-0290 EDGE-CUTTING -SERRATED
FIELD INSTALLATION
FIELD INSTALLATION
Parts for your 651E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP13990103
8X-8397: GEAR GP-AUGER DRIVE
8X-8397 GEAR GP-AUGER DRIVE
FIELD INSTALLATION
FIELD INSTALLATION
Parts for your 651E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1Q-6684 | [270] | BEARING AS-NEEDLE | ||
| 1Q-6685 | [135] | BEARING AS-NEEDLE | ||
| 1Q-6695 | [420] | BEARING AS-NEEDLE | ||
| 8S-9093 | [1] | BOLT (1-8X2.25-IN) | ||
| 1Q-6724 | [1] | CONE-BEARING | ||
| 6V-0855 | [1] | BEARING AS-TAPERED ROLLER | ||
| 1Q-6725 | [1] | CUP-BEARING | ||
| 2K-5069 | [1] | CUP-BEARING (TAPERED ROLLER) | ||
| 1Q-6692 | [3] | GEAR-COMPOUND | ||
| 1Q-6681 | [3] | GEAR-PLANETARY | ||
| 1Q-6687 | [1] | GEAR-RING | ||
| 1Q-6696 | [1] | GEAR-RING | ||
| 2J-3506 | [20] | NUT-FULL (3/4-10-THD) | ||
| 1Q-6686 | [3] | PIN-DOWEL | ||
| 1Q-6694 | [3] | PIN-PLANETARY | ||
| 8X-9196 | [1] | PINION | ||
| 1Q-6689 | [1] | PINION-OUTPUT | ||
| 2H-3865 | [1] | PLUG-MAGNETIC (AUGER DRIVE GEAR GP) | ||
| 9F-2247 | [6] | PLUG-PIPE | ||
| 7H-3171 | [6] | PLUG-PIPE | ||
| 9W-6618 | [1] | SEAL GP-DUO-CONE | ||
| 1Q-6693 | [9] | SPACER | ||
| [6] | SPACER | |||
| 5P-8250 | [1] | WASHER (28X49X5-MM THK) | ||
| 1Q-6691 | [6] | WASHER-THRUST | ||
| 1Q-6680 | [6] | WASHER-THRUST | ||
#SEBP13990104
4T-1457: PROTECTOR & BIT GP
4T-1457 PROTECTOR & BIT GP
AN ATTACHMENT
AN ATTACHMENT
#SEBP13990105
1U-0827: BRACKET GP-SHIPPING
1U-0827 BRACKET GP-SHIPPING
PART OF 8X-0935 CHASSIS AR, 3G-8393, 8W-4460 SCRAPER AR
PART OF 8X-0935 CHASSIS AR, 3G-8393, 8W-4460 SCRAPER AR
#SEBP13990106
233-6984: KIT-GASKET
233-6984 KIT-GASKET
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. KIT DOES NOT INCLUDE THE OIL PAN FILTER.
FOR USE WITH E511- ENGINE S/N 2WS 1-UP, E536 ENGINE S/N 5DS 1-UP
FIELD INSTALLATION
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. KIT DOES NOT INCLUDE THE OIL PAN FILTER.
FOR USE WITH E511- ENGINE S/N 2WS 1-UP, E536 ENGINE S/N 5DS 1-UP
FIELD INSTALLATION
Parts for your 651E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6B-2250 | [12] | GASKET | ||
| 155-3629 | [1] | GASKET | ||
| 166-9144 | [1] | GASKET | ||
| 103-6045 | [1] | SEAL (FRONT COVER) | ||
| 110-0004 | [1] | SEAL | ||
| 142-5867 | [1] | SEAL-CRANKSHAFT (FRONT) | ||
| 5S-2106 | [1] | SEAL-LIP TYPE | ||
| 250-0466 | [1] | SEAL-O-RING | ||
| 5E-8771 | [1] | SEAL-O-RING | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 7X-4805 | [2] | SEAL-O-RING | ||
| 8T-9527 | [1] | SEAL-O-RING | ||
| 061-9455 | [1] | SEAL-O-RING | ||
| 107-5769 | [2] | SEAL-O-RING | ||
| 117-8801 | [1] | SEAL-O-RING | ||
| 156-5198 | [1] | SEAL-O-RING | ||
| 3P-1155 | [2] | SEAL-O-RING | ||
| 122-3772 | [1] | SEAL-O-RING | ||
| 228-4947 | [2] | SEAL-O-RING | ||
| 126-1757 | [12] | WASHER (10.85X19.3X1.27-MM THK) | ||
| 129-5427 | [2] | WASHER-SPECIAL (SEALING) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP13990107
349-1530: KIT-GASKET
349-1530 KIT-GASKET -REAR STRUCTURE
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER
FIELD REPLACEMENT FOR 349-6937 KIT-GASKET
FOR USE WITH BET 1-UP
FIELD INSTALLATION
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER
FIELD REPLACEMENT FOR 349-6937 KIT-GASKET
FOR USE WITH BET 1-UP
FIELD INSTALLATION
Parts for your 651E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2A-1162 | [3] | GASKET (DRAIN PLUG) | |
| 2. | 6L-3397 | [1] | GASKET | |
| 3. | 4H-7869 | [2] | GASKET | |
| 4. | 5H-0244 | [1] | GASKET | |
| 5. | 9Y-6089 | [1] | GASKET | |
| 6. | 155-5619 | [1] | GASKET (FLYWHEEL HOUSING) | |
| 7. | 142-5868 | [1] | SEAL-CRANKSHAFT (REAR)(REAR) | |
| 8. | 234-8937 | [1] | SEAL-INTEGRAL (FLYWHEEL HOUSING) | |
| 9. | 250-0466 | [1] | SEAL-O-RING | |
| 10. | 230-3728 | [1] | SEAL-O-RING | |
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
#SEBP13990108
349-1533: KIT-GASKET
349-1533 KIT-GASKET -WATER PUMP
CONTAINS THE GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES
FIELD INSTALLATION
CONTAINS THE GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES
FIELD INSTALLATION
Parts for your 651E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4N-0933 | [1] | GASKET | ||
| 4N-3841 | [1] | GASKET | ||
| 125-0434 | [1] | SEAL-INTEGRAL | ||
| 9M-3786 | [1] | SEAL-O-RING | ||
| 109-0076 | [1] | SEAL-O-RING | ||
| 109-0077 | [3] | SEAL-O-RING | ||
| 122-3772 | [1] | SEAL-O-RING | ||
| 171-4358 | [2] | SEAL-O-RING | ||
| FOR LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP13990109
6V-3850: PLATE & FILM GP
Parts for your 651E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9X-5825 | [2] | FILM (LH & RH ENDS OF FUEL TANK) | ||
| 9X-5818 | [2] | FILM-STRIPE (LH & RH SIDES OF BOWL - FRONT) | ||
| 9X-5822 | [1] | FILM-STRIPE (CAT)(RH SIDE OF BOWL - REAR) | ||
| 9X-5823 | [1] | FILM-STRIPE (CAT)(LH SIDE OF BOWL - REAR) | ||
| 8T-1363 | [2] | FILM-WARNING (COMPRESSED SPRING, READ OMM) | ||
| (LOCATE ON REAR SIDE OF BRAKE ACTUATORS) | ||||
| 1H-1068 | [1] | PLATE-SCRAPER (SERIAL NUMBER) | ||
| (LOCATE ON LEFT SIDE OF BOWL AT REAR DRAFT FRAME PIVOT) | ||||
| 1S-7095 | [1] | FILM-INFORMATION (SCRAPER CAPACITY) | ||
| (MOUNT ADJACENT TO & LEVEL WITH SERIAL NUMBER PLATE) | ||||
| 6V-3696 | [1] | PLATE-WARNING (BLOCK APRON) | ||
| 4B-4158 | [10] | SCREW-DRIVE (NO 4X0.25-IN) | ||
Information:
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
Special Instruction
Installation Of Router Bit Reinforcement Supports{6261}
Installation Of Router Bit Reinforcement Supports{6261}
Installation Of Router Bit Reinforcement Supports{6261}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine



