AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3304 Industrial Engine 10E00300-UP BASIC ENGINE Caterpillar SIS



INDUSTRIAL ENGINE 3304 INDUSTRIAL ENGINE 10E
 3304 Industrial Engine 10E00300-UP SEBP1400 3304 10E   (1982)

Parts group 3304:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR GP
109-1317 AIR COMPRESSOR GP
109-1317 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM
PART OF 110-5765 AIR COMPRESSOR GP
FIELD REPLACEMENT ORDER @@@@@110-5764@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
109-1318 AIR COMPRESSOR GP
109-1318 AIR COMPRESSOR GP
S/N 10E300-5449
16.5 CFM AT 1250 RPM
PART OF 110-5767 AIR COMPRESSOR GP
FIELD REPLACEMENT ORDER @@@@@110-5766@@@@@
AN ATTACHMENT
110-5764 AIR COMPRESSOR GP
110-5764 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM
PART OF 110-5765 AIR COMPRESSOR GP
FIELD REPLACEMENT FOR @@@@@109-1317@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
110-5765 AIR COMPRESSOR GP
110-5765 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM
Type 1
FOR USE WITH @@@@@110-5763@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
110-5765 AIR COMPRESSOR GP
110-5765 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM
Type 2
FOR USE WITH @@@@@110-5763@@@@@
AN ATTACHMENT
110-5766 AIR COMPRESSOR GP
110-5766 AIR COMPRESSOR GP
16.5 CFM AT 1250 RPM
FIELD REPLACEMENT FOR @@@@@109-1318@@@@@
AIR COMPRESSOR GP
110-5767 AIR COMPRESSOR GP
110-5767 AIR COMPRESSOR GP
S/N 10E300-5449
16.5 CFM AT 1250 RPM
FOR USE WITH @@@@@110-5763@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
110-5767 AIR COMPRESSOR GP
110-5767 AIR COMPRESSOR GP
S/N 10E5450-UP
16.5 CFM AT 1250 RPM
FOR USE WITH @@@@@110-5763@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
164-7560 AIR COMPRESSOR GP
164-7560 AIR COMPRESSOR GP
S/N 10E5450-UP
16.5 CFM AT 1250 RPM
PART OF 110-5767 AIR COMPRESSOR GP
FIELD REPLACEMENT ORDER @@@@@164-7562@@@@@
AN ATTACHMENT
164-7562 AIR COMPRESSOR GP
164-7562 AIR COMPRESSOR GP
16.5 CFM AT 1250 RPM
FIELD REPLACEMENT FOR @@@@@164-7560@@@@@
FIELD INSTALLATION
AIR COMPRESSOR GP
1W-7145 AIR COMPRESSOR GP
1W-7145 AIR COMPRESSOR GP
12 CFM AT 1250 RPM
PART OF 9N-8069 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
9N-8069 AIR COMPRESSOR GP
9N-8069 AIR COMPRESSOR GP
12 CFM AT 1250 RPM
ALSO AN ATTACHMENT
LINES GP-AIR COMPRESSOR
110-5763 LINES GP-AIR COMPRESSOR
110-5763 LINES GP-AIR COMPRESSOR
FOR USE WITH @@@@@110-5765@@@@@, @@@@@110-5767@@@@@
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
6C-1049 LINES GP-AIR COMPRESSOR
6C-1049 LINES GP-AIR COMPRESSOR
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
8N-6046 LINES GP-AIR COMPRESSOR
8N-6046 LINES GP-AIR COMPRESSOR
Type 1
ALSO AN ATTACHMENT
LINES GP-AIR COMPRESSOR
8N-6046 LINES GP-AIR COMPRESSOR
8N-6046 LINES GP-AIR COMPRESSOR
Type 2
ALSO AN ATTACHMENT
LINES GP-AIR COMPRESSOR
8N-6046 LINES GP-AIR COMPRESSOR
8N-6046 LINES GP-AIR COMPRESSOR
Type 3
ALSO AN ATTACHMENT
BALANCER GP
BALANCER GP
1W-2872 BALANCER GP
1W-2872 BALANCER GP
BELT TIGHTENER GP
BELT TIGHTENER GP
3N-2755 BELT TIGHTENER GP
3N-2755 BELT TIGHTENER GP
FOR USE AS A FAN DRIVE BELT TIGHTENER WHEN ALTERNATOR IS NOT USED
FOR USE WITH INDUSTRIAL ENGINE SUPPORT
CANNOT BE USED WITH MOBILE EQUIPMENT FRONT ENGINE SUPPORT
AN ATTACHMENT
BELT TIGHTENER GP
5N-7744 BELT TIGHTENER GP
5N-7744 BELT TIGHTENER GP
FOR USE WITH INDUSTRIAL MOBILE EQUIPMENT ONLY
AN ATTACHMENT
CAMSHAFT GP
CAMSHAFT GP
1N-4436 CAMSHAFT GP
1N-4436 CAMSHAFT GP
SINGLE
CLUTCH GP
CLUTCH AS
3N-4128 CLUTCH AS
3N-4128 CLUTCH AS
PART OF 2W-4902 CLUTCH GP
AN ATTACHMENT
CLUTCH AS
5N-3789 CLUTCH AS
5N-3789 CLUTCH AS
PART OF 3N-7840, 4W-2650 CLUTCH GP
AN ATTACHMENT
CLUTCH GP
2W-4902 CLUTCH GP
2W-4902 CLUTCH GP
PART OF 2W-4903 POWER TAKE-OFF GP
AN ATTACHMENT
CLUTCH GP
3N-7840 CLUTCH GP
3N-7840 CLUTCH GP
PART OF 5N-4657 POWER TAKE-OFF GP
AN ATTACHMENT
CLUTCH GP
3N-9097 CLUTCH GP
3N-9097 CLUTCH GP
PART OF 3N-9098 POWER TAKE-OFF GP
AN ATTACHMENT
CLUTCH GP
4P-3073 CLUTCH GP
4P-3073 CLUTCH GP
PART OF 4P-3074 POWER TAKE-OFF GP
FOR USE WITH SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
AN ATTACHMENT
CLUTCH GP
4W-2650 CLUTCH GP
4W-2650 CLUTCH GP
PART OF 4W-2651 POWER TAKE-OFF GP
AN ATTACHMENT
CRANKSHAFT GP
ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL -CRANKSHAFT
FRONT
CRANKSHAFT AS
2W-7960 CRANKSHAFT AS
2W-7960 CRANKSHAFT AS
S/N 10E300-3145
FIELD REPLACEMENT FOR @@@@@ 4N-7695@@@@@
CRANKSHAFT AS
337-0872 CRANKSHAFT AS
337-0872 CRANKSHAFT AS
S/N 10E300-3145
FIELD REPLACEMENT FOR @@@@@ 4N-7695@@@@@
CRANKSHAFT AS
4N-7692 CRANKSHAFT AS
4N-7692 CRANKSHAFT AS
S/N 10E300-3145
FIELD REPLACEMENT FOR @@@@@ 4N-7695@@@@@
CRANKSHAFT AS
4N-7695 CRANKSHAFT AS
4N-7695 CRANKSHAFT AS
S/N 10E300-3145
PART OF 6N-8080 CRANKSHAFT GP
FIELD REPLACEMENT ORDER @@@@@ 2W-7960@@@@@, @@@@@ 4N-7692@@@@@, @@@@@337-0872@@@@@
CRANKSHAFT GP
6N-8080 CRANKSHAFT GP
6N-8080 CRANKSHAFT GP
S/N 10E300-3145
CRANKSHAFT GP
6N-8080 CRANKSHAFT GP
6N-8080 CRANKSHAFT GP
S/N 10E3146-UP
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
2P-7308 SEAL GP-CRANKSHAFT
2P-7308 SEAL GP-CRANKSHAFT
S/N 10E815-3145
SEAL GP-CRANKSHAFT
2P-7308 SEAL GP-CRANKSHAFT
2P-7308 SEAL GP-CRANKSHAFT
S/N 10E3146-5944
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
2W-0102 COVER GP-CYLINDER BLOCK
2W-0102 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7N-1714 COVER GP-CYLINDER BLOCK
7N-1714 COVER GP-CYLINDER BLOCK
S/N 10E815-5944
FOR USE WITH @@@@@ 7N-1717@@@@@
ALSO AN ATTACHMENT
CYLINDER BLOCK AS
7N-6552 CYLINDER BLOCK AS
7N-6552 CYLINDER BLOCK AS
PART OF 7N-6553 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 1N-3574@@@@@, 6N-7725 KIT-CYLINDER BLOCK
CYLINDER BLOCK GP
1N-3574 CYLINDER BLOCK GP
1N-3574 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 7N-6552@@@@@
CYLINDER BLOCK GP
7N-6553 CYLINDER BLOCK GP
7N-6553 CYLINDER BLOCK GP
CYLINDER HEAD GP
COVER GP-CYLINDER HEAD
2P-6530 COVER GP-CYLINDER HEAD
2P-6530 COVER GP-CYLINDER HEAD
CYLINDER HEAD GP
1N-4304 CYLINDER HEAD GP
1N-4304 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@ 7N-6544@@@@@, @@@@@ 8N-0224@@@@@
CYLINDER HEAD GP
7N-6544 CYLINDER HEAD GP
7N-6544 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 1N-4304@@@@@
CYLINDER HEAD GP
8N-0224 CYLINDER HEAD GP
8N-0224 CYLINDER HEAD GP
S/N 10E587-UP
FIELD REPLACEMENT ORDER @@@@@ 1N-4304@@@@@
FASTENER GP-CYLINDER HEAD
7N-9534 FASTENER GP-CYLINDER HEAD
7N-9534 FASTENER GP-CYLINDER HEAD
DRIVE GP-AUXILIARY
DRIVE GP-AUXILIARY
138-2780 DRIVE GP-AUXILIARY
138-2780 DRIVE GP-AUXILIARY
FOR USE WITH HIGH CONTACT RATIO SPUR GEAR TRAIN
AN ATTACHMENT
DRIVE GP-AUXILIARY
1W-6298 DRIVE GP-AUXILIARY
1W-6298 DRIVE GP-AUXILIARY
CANNOT BE USED WITH HYDRAULIC PUMP DRIVES OR HOOD AND DASH
AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
3N-6987 DRIVE GP-FAN
3N-6987 DRIVE GP-FAN
S/N 10E1022-UP
FOR USE WITH SAE NO.1 FLYWHEEL HOUSING
ALSO AN ATTACHMENT
DRIVE GP-FAN
3N-7019 DRIVE GP-FAN
3N-7019 DRIVE GP-FAN
CENTER IS 6.48 INCH OUT FROM HEAD, CRANK CENTER TO FAN VARIES FROM 13 TO 22 INCH, ADJUSTABLE
ALSO AN ATTACHMENT
DRIVE GP-FAN
3N-7210 DRIVE GP-FAN
3N-7210 DRIVE GP-FAN
FOR USE WITH FAN PULLEY & ALTERNATOR OR BELT TIGHTENER
AN ATTACHMENT
DRIVE GP-FAN
3N-7397 DRIVE GP-FAN
3N-7397 DRIVE GP-FAN
CENTER IS 6.48 INCH OUT FROM HEAD, CRANK CENTER TO FAN VARIES FROM 12 TO 23 INCH, ADJUSTABLE
AN ATTACHMENT
DRIVE GP-FAN
3N-7397 DRIVE GP-FAN
3N-7397 DRIVE GP-FAN
S/N 10E4554-UP
CENTER IS 6.48 INCH OUT FROM HEAD, CRANK CENTER TO FAN VARIES FROM 12 TO 23 INCH, ADJUSTABLE
ALSO AN ATTACHMENT
DRIVE GP-FAN
5N-4555 DRIVE GP-FAN
5N-4555 DRIVE GP-FAN
AN ATTACHMENT
DRIVE GP-PUMP
DRIVE GP-PUMP
1W-6192 DRIVE GP-PUMP
1W-6192 DRIVE GP-PUMP
2 BOLT/4 BOLT FLANGE, MOUNTED TO LOWER LH REAR OF PUMP HOUSING
AN ATTACHMENT
DRIVE GP-PUMP
1W-6192 DRIVE GP-PUMP
1W-6192 DRIVE GP-PUMP
S/N 10E4554-UP
2 BOLT/4 BOLT FLANGE, MOUNTED TO LOWER LH REAR OF PUMP HOUSING
ALSO AN ATTACHMENT
DRIVE GP-PUMP
9L-5621 DRIVE GP-PUMP
9L-5621 DRIVE GP-PUMP
CANNOT BE USED WITH AUXILIARY DRIVE
AN ATTACHMENT
MOUNTING GP-HYD PUMP DRIVE
3N-4119 MOUNTING GP-HYD PUMP DRIVE
3N-4119 MOUNTING GP-HYD PUMP DRIVE
PROVIDES MOUNTING OF CUSTOMER INSTALLED HYDRAULIC PUMP DRIVE WITH CUT-OFF CLUTCH ON FRONT OF ENGINE, CLUTCH MUST BE SAE 8 IN, SINGLE PLATE, OVER CENTER, WITH SAE NO. 5 HOUSING & NO. 305 PILOT BEARING
AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL AS
9N-2076 FLYWHEEL AS
9N-2076 FLYWHEEL AS
PART OF 9N-2632 FLYWHEEL GP
AN ATTACHMENT
FLYWHEEL AS
9N-2082 FLYWHEEL AS
9N-2082 FLYWHEEL AS
S/N 10E300-720
5.09 MM WIDE
PART OF 9L-4380 FLYWHEEL GP
ALSO AN ATTACHMENT
FLYWHEEL GP
1W-2773 FLYWHEEL GP
1W-2773 FLYWHEEL GP
ADAPTS SAE NO. 1 FLYWHEEL HOUSING TO SAE NO.3 C270 CONVERTER
AN ATTACHMENT
FLYWHEEL GP
5N-5682 FLYWHEEL GP
5N-5682 FLYWHEEL GP
FOR USE WITH SAE NO 1 FLYWHEEL HOUSING
AN ATTACHMENT
FLYWHEEL GP
6N-5027 FLYWHEEL GP
6N-5027 FLYWHEEL GP
FOR USE WITH 14" 2 PLATE SPICER OF LIPE CLUTCH, SAE NO. 1 HOUSING
AN ATTACHMENT
FLYWHEEL GP
6N-9026 FLYWHEEL GP
6N-9026 FLYWHEEL GP
S/N 10E815-5944
FOR USE WITH @@@@@ 1W-4759@@@@@, @@@@@ 7N-1717@@@@@, @@@@@ 7N-1714@@@@@, TOP MOUNTED TURBO
FLYWHEEL GP
7N-2275 FLYWHEEL GP
7N-2275 FLYWHEEL GP
FOR USE WITH 14 INCH 2 PLATE SPICER LIPE CLUTCH, FLYWHEEL IS NO. 2 WITH NO. 1 RING GEAR SAE NO. 2, FOR USE WITH SAE NO. 1 HOUSING
AN ATTACHMENT
FLYWHEEL GP
7N-3496 FLYWHEEL GP
7N-3496 FLYWHEEL GP
ALSO AN ATTACHMENT
FLYWHEEL GP
7N-3497 FLYWHEEL GP
7N-3497 FLYWHEEL GP
AN ATTACHMENT
FLYWHEEL GP
8L-5077 FLYWHEEL GP
8L-5077 FLYWHEEL GP
S/N 10E2395-UP
FOR USE WITH SAE NO. 2 FLYWHEEL HOUSING
ALSO AN ATTACHMENT
FLYWHEEL GP
9L-4380 FLYWHEEL GP
9L-4380 FLYWHEEL GP
S/N 10E300-720
FOR USE WITH 14 INCH 2 PLATE SPICER LIPE-ROLLWAY ML OR PT CLUTCH, WITH SAE NO.2 HOUSING, HAS ADEQUATE CLEARANCE FOR SUPER DUTY CLUTCH
ALSO AN ATTACHMENT
FLYWHEEL GP
9N-2632 FLYWHEEL GP
9N-2632 FLYWHEEL GP
FOR USE WITH SAE #2 FLYWHEEL HOUSING
AN ATTACHMENT
GEAR GP-REAR
7N-1717 GEAR GP-REAR
7N-1717 GEAR GP-REAR -ACCESSORY DRIVE
S/N 10E815-5944
GEAR GP
GEAR GP-FRONT
1W-5634 GEAR GP-FRONT
1W-5634 GEAR GP-FRONT -TIMING
S/N 10E300-4300
GEAR GP-FRONT
1W-5634 GEAR GP-FRONT
1W-5634 GEAR GP-FRONT -TIMING
S/N 10E4301-UP
GEAR GP-REAR
7N-1717 GEAR GP-REAR
7N-1717 GEAR GP-REAR -ACCESSORY DRIVE
S/N 10E815-5944
HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
GUARD GP-BELT
GUARD GP-BELT
4W-6146 GUARD GP-BELT
4W-6146 GUARD GP-BELT
FOR USE WITH ALTERNATOR
CANNOT BE USED WITH HOOD & DASH, BELT TIGHTENER,"A" SIZE (9.5 SQ FT) RADIATOR, EXPANSION TANK OR RH OIL FILLER
AN ATTACHMENT
GUARD GP-BELT
4W-6147 GUARD GP-BELT
4W-6147 GUARD GP-BELT
FOR USE WITH BELT TIGHTENER
CANNOT BE USED WITH HOOD & DASH, ALTERNATOR, "A"SIZE (9.5 SQ FT) RADIATOR, EXPANSION TANK OR RH OIL FILLER
AN ATTACHMENT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
4W-6309 COVER GP-FLYWHEEL HOUSING
4W-6309 COVER GP-FLYWHEEL HOUSING
HOUSING GP-FLYWHEEL
1W-4759 HOUSING GP-FLYWHEEL
1W-4759 HOUSING GP-FLYWHEEL
S/N 10E815-5944
FOR USE WITH @@@@@ 7N-1717@@@@@, @@@@@ 6N-9026@@@@@, @@@@@ 7N-1714@@@@@, TOP MOUNTED TURBO
HOUSING GP-FLYWHEEL
6N-5233 HOUSING GP-FLYWHEEL
6N-5233 HOUSING GP-FLYWHEEL
S/N 10E300-810
FOR USE WITH SAE NO. 2 FLYWHEEL WITHOUT REAR GEAR TRAIN
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
6N-5233 HOUSING GP-FLYWHEEL
6N-5233 HOUSING GP-FLYWHEEL
S/N 10E811-UP
FOR USE WITH SAE NO. 2 FLYWHEEL WITHOUT REAR GEAR TRAIN
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
8N-2322 HOUSING GP-FLYWHEEL
8N-2322 HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
8N-2395 HOUSING GP-FLYWHEEL
8N-2395 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
2P-6528 COVER GP-FRONT HOUSING
2P-6528 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
3N-4923 COVER GP-FRONT HOUSING
3N-4923 COVER GP-FRONT HOUSING
PROVIDES COVERS FOR TOP & BOTTOM ACCESSORY DRIVES AND FOR THE FUEL PUMP DRIVE GEAR
AN ATTACHMENT
COVER GP-FRONT HOUSING
4N-6050 COVER GP-FRONT HOUSING
4N-6050 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
5R-4136 COVER GP-FRONT HOUSING
5R-4136 COVER GP-FRONT HOUSING
S/N 10E2395-5944
FASTENER GP-FRONT HOUSING
1W-3802 FASTENER GP-FRONT HOUSING
1W-3802 FASTENER GP-FRONT HOUSING
GEAR GP-FRONT
1W-5634 GEAR GP-FRONT
1W-5634 GEAR GP-FRONT -TIMING
S/N 10E300-4300
GEAR GP-FRONT
1W-5634 GEAR GP-FRONT
1W-5634 GEAR GP-FRONT -TIMING
S/N 10E4301-UP
HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
6N-8326 LIFTING GP-ENGINE
6N-8326 LIFTING GP-ENGINE
LIFTING GP-ENGINE
6N-8336 LIFTING GP-ENGINE
6N-8336 LIFTING GP-ENGINE
LIFTING GP-ENGINE
7N-9122 LIFTING GP-ENGINE
7N-9122 LIFTING GP-ENGINE
S/N 10E815-5944
LIFTING GP-ENGINE
8N-3286 LIFTING GP-ENGINE
8N-3286 LIFTING GP-ENGINE
S/N 10E300-1732
LIFTING GP-ENGINE
8N-3286 LIFTING GP-ENGINE
8N-3286 LIFTING GP-ENGINE
S/N 10E1733-UP
ALSO AN ATTACHMENT
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
5N-5327 MOUNTING GP-ALTERNATOR
5N-5327 MOUNTING GP-ALTERNATOR
S/N 10E4554-UP
FOR USE WITH FRONT SUPPORT & FAN DRIVE
ALSO AN ATTACHMENT
MOUNTING GP-ALTERNATOR
8N-6019 MOUNTING GP-ALTERNATOR
8N-6019 MOUNTING GP-ALTERNATOR
Type 1
FOR USE WITH FAN DRIVE
MOUNTING GP-ALTERNATOR
8N-6019 MOUNTING GP-ALTERNATOR
8N-6019 MOUNTING GP-ALTERNATOR
Type 2
FOR USE WITH FAN DRIVE
MOUNTING GP-ENGINE
FASTENER GP-FRONT SUPPORT
8N-1963 FASTENER GP-FRONT SUPPORT
8N-1963 FASTENER GP-FRONT SUPPORT
FOR USE WITH @@@@@ 7N-0744@@@@@
AN ATTACHMENT
SUPPORT GP-ENGINE
1W-6332 SUPPORT GP-ENGINE
1W-6332 SUPPORT GP-ENGINE
REAR
FOR USE WITH NO. 2 FLYWHEEL HOUSING
AN ATTACHMENT
SUPPORT GP-ENGINE
2N-8485 SUPPORT GP-ENGINE
2N-8485 SUPPORT GP-ENGINE
AN ATTACHMENT
SUPPORT GP-ENGINE
3N-2883 SUPPORT GP-ENGINE
3N-2883 SUPPORT GP-ENGINE
FOR USE WITH RADIATOR & MOBILE EQUIPMENT AR
ALSO AN ATTACHMENT
SUPPORT GP-ENGINE
3N-6695 SUPPORT GP-ENGINE
3N-6695 SUPPORT GP-ENGINE -FRONT
FOR USE WITH STANDARD INDUSTRIAL TYPE SUPPORT
CANNOT BE USED WITH RADIATOR
AN ATTACHMENT
SUPPORT GP-ENGINE
7N-0744 SUPPORT GP-ENGINE
7N-0744 SUPPORT GP-ENGINE
SINGLE MOUNTING POINT FRONT SUPPORT
FOR USE WITH @@@@@ 7N-8143@@@@@
ALSO AN ATTACHMENT
SUPPORT GP-ENGINE
7N-1268 SUPPORT GP-ENGINE
7N-1268 SUPPORT GP-ENGINE
REAR
AN ATTACHMENT
SUPPORT GP-ENGINE
7N-8143 SUPPORT GP-ENGINE
7N-8143 SUPPORT GP-ENGINE
PROVIDES CROSS BAR FOR TWO POINT HOLD DOWN, FOR USE WITH MOBILE EQUIPMENT
AN ATTACHMENT
SUPPORT GP-ENGINE
9N-0548 SUPPORT GP-ENGINE
9N-0548 SUPPORT GP-ENGINE -REAR
S/N 10E4554-UP
ALSO AN ATTACHMENT
PAN GP-OIL
PAN GP-OIL
2W-3538 PAN GP-OIL
2W-3538 PAN GP-OIL
S/N 10E587-904
PAN GP-OIL
2W-3538 PAN GP-OIL
2W-3538 PAN GP-OIL
S/N 10E905-UP
PAN GP-OIL
3N-2924 PAN GP-OIL
3N-2924 PAN GP-OIL
PAN GP-OIL
4N-7142 PAN GP-OIL
4N-7142 PAN GP-OIL
S/N 10E300-904
PROVIDES RH & LH DIPSTICK LOCATIONS
FOR USE WITH @@@@@ 5L-1594@@@@@
ALSO AN ATTACHMENT
PAN GP-OIL
4N-7142 PAN GP-OIL
4N-7142 PAN GP-OIL
S/N 10E905-UP
PROVIDES RH & LH DIPSTICK LOCATIONS
FOR USE WITH @@@@@ 5L-1594@@@@@
ALSO AN ATTACHMENT
PISTON & ROD GP
PISTON & ROD GP
168-4532 PISTON & ROD GP
168-4532 PISTON & ROD GP
S/N 10E5635-UP
15:1 RATIO
PISTON & ROD GP
1W-6588 PISTON & ROD GP
1W-6588 PISTON & ROD GP
S/N 10E587-5570
16:1 RATIO
PISTON & ROD GP
1W-6588 PISTON & ROD GP
1W-6588 PISTON & ROD GP
S/N 10E5571-UP
16:1 RATIO
PISTON & ROD GP
2W-1177 PISTON & ROD GP
2W-1177 PISTON & ROD GP
15:1 RATIO
PISTON GP
2W-1711 PISTON GP
2W-1711 PISTON GP
15:1 RATIO
PART OF 2W-1177 PISTON & ROD GP
Type 1
PISTON GP
2W-1711 PISTON GP
2W-1711 PISTON GP
15:1 RATIO
PART OF 2W-1177 PISTON & ROD GP
Type 2
POWER TAKE-OFF GP
POWER TAKE-OFF GP
2W-4903 POWER TAKE-OFF GP
2W-4903 POWER TAKE-OFF GP
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
POWER TAKE-OFF GP
3N-9098 POWER TAKE-OFF GP
3N-9098 POWER TAKE-OFF GP
CLUTCH
FOR USE WITH SAE NO. 1 FLYWHEEL
AN ATTACHMENT
POWER TAKE-OFF GP
4P-3074 POWER TAKE-OFF GP
4P-3074 POWER TAKE-OFF GP
REAR CLUTCH SUPPORT IS REQUIRED FOR SIDE LOAD APPLICATIONS
FOR USE WITH IN-LINE LOAD ONLY, SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
POWER TAKE-OFF GP
4W-2651 POWER TAKE-OFF GP
4W-2651 POWER TAKE-OFF GP
REAR CLUTCH
FOR USE WITH SAE 2 FLYWHEEL HOUSING & #306 PILOT BRG. BORE
AN ATTACHMENT
POWER TAKE-OFF GP
5N-4657 POWER TAKE-OFF GP
5N-4657 POWER TAKE-OFF GP
DO NOT USE ABOVE 2400 RPM. REAR CLUTCH
FOR USE WITH SAE NO. 2 FLYWHEEL HOUSING
AN ATTACHMENT
SUPPORT GP-POWER TAKE-OFF
5N-1933 SUPPORT GP-POWER TAKE-OFF
5N-1933 SUPPORT GP-POWER TAKE-OFF
CLUTCH
FOR USE WITH @@@@@ 4P-3074@@@@@
CANNOT BE USED WITH FUEL TANK BASE
AN ATTACHMENT
PULLEY GP
PULLEY GP
3N-6934 PULLEY GP
3N-6934 PULLEY GP
FOR USE WITH TRUNNION SUPPORT ONLY
AN ATTACHMENT
PULLEY GP-CRANKSHAFT
3N-2884 PULLEY GP-CRANKSHAFT
3N-2884 PULLEY GP-CRANKSHAFT
FOR USE WITH MOBILE EQUIPMENT AR
ALSO AN ATTACHMENT
PULLEY GP-CRANKSHAFT
3N-3274 PULLEY GP-CRANKSHAFT
3N-3274 PULLEY GP-CRANKSHAFT
2 GROOVE
FOR USE WITH MARINE ALTERNATOR
AN ATTACHMENT
PULLEY GP-CRANKSHAFT
3N-5618 PULLEY GP-CRANKSHAFT
3N-5618 PULLEY GP-CRANKSHAFT
PROVIDES A 3 GROOVE 9.12 INCH PULLEY WITH A GROOVE WIDTH OF 0.50 INCH
AN ATTACHMENT
PULLEY GP-CRANKSHAFT
3N-6128 PULLEY GP-CRANKSHAFT
3N-6128 PULLEY GP-CRANKSHAFT
2 GROOVE
CANNOT BE USED WITH STUB SHAFT
AN ATTACHMENT
PULLEY GP-FAN DRIVE
3N-5626 PULLEY GP-FAN DRIVE
3N-5626 PULLEY GP-FAN DRIVE
PROVIDES A 3 GROOVE 7.50 INCH DIAMETER PULLEY WITH A GROOVE WIDTH OF 0.50 INCH
PULLEY GP-FAN DRIVE
3N-5627 PULLEY GP-FAN DRIVE
3N-5627 PULLEY GP-FAN DRIVE
FOR USE WITH CUSTOMER SUPPLIED RADIATOR
AN ATTACHMENT
PULLEY GP-FAN DRIVE
3N-7211 PULLEY GP-FAN DRIVE
3N-7211 PULLEY GP-FAN DRIVE
FOR USE WITH @@@@@ 3N-7210@@@@@
AN ATTACHMENT
PULLEY GP-FAN DRIVE
6N-6703 PULLEY GP-FAN DRIVE
6N-6703 PULLEY GP-FAN DRIVE
S/N 10E1022-UP
4 GROOVE
ALSO AN ATTACHMENT
PULLEY GP-FAN DRIVE
8N-2111 PULLEY GP-FAN DRIVE
8N-2111 PULLEY GP-FAN DRIVE
PROVIDES A 0.67:1 FAN RATIO
AN ATTACHMENT
PULLEY GP-FAN DRIVE
8N-2252 PULLEY GP-FAN DRIVE
8N-2252 PULLEY GP-FAN DRIVE
PROVIDES REVERSIBLE FOUR GROOVE PULLEY WITH THE REAR GROOVE FOR FREON COMPRESSOR, OR WHEN REVERSED IS USED WITH A STACK-ON PULLEY
AN ATTACHMENT
SHAFT GP-STUB
GUARD GP-STUB SHAFT
5N-3312 GUARD GP-STUB SHAFT
5N-3312 GUARD GP-STUB SHAFT
CANNOT BE USED WITH REAR ENCLOSED CLUTCH, SINGLE BEARING GENERATOR, PTO OR CATERPILLAR SUPPLIED GENERATOR
AN ATTACHMENT
SHAFT GP-STUB
6L-2691 SHAFT GP-STUB
6L-2691 SHAFT GP-STUB -FRONT
CANNOT BE USED WITH CRANKSHAFT AUXILIARY PULLEY GP
AN ATTACHMENT
SHAFT GP-STUB
6L-2692 SHAFT GP-STUB
6L-2692 SHAFT GP-STUB
REAR
AN ATTACHMENT
SERPENTINE/V-BELTS
GUARD GP-BELT
4W-6146 GUARD GP-BELT
4W-6146 GUARD GP-BELT
FOR USE WITH ALTERNATOR
CANNOT BE USED WITH HOOD & DASH, BELT TIGHTENER,"A" SIZE (9.5 SQ FT) RADIATOR, EXPANSION TANK OR RH OIL FILLER
AN ATTACHMENT
GUARD GP-BELT
4W-6147 GUARD GP-BELT
4W-6147 GUARD GP-BELT
FOR USE WITH BELT TIGHTENER
CANNOT BE USED WITH HOOD & DASH, ALTERNATOR, "A"SIZE (9.5 SQ FT) RADIATOR, EXPANSION TANK OR RH OIL FILLER
AN ATTACHMENT
V-BELT GP
5F-3581 V-BELT GP
5F-3581 V-BELT GP -FAN DRIVE
AN ATTACHMENT
061-9508 V-BELT SET
061-9508 V-BELT SET
1118MM (44.02 IN) LONG
AN ATTACHMENT
5N-4851 V-BELT SET
5N-4851 V-BELT SET
1410MM (55.51 IN) LG. 284.48MM FAN MOUNTING HEIGHT
AN ATTACHMENT
8L-4526 V-BELT SET
8L-4526 V-BELT SET
1359MM (53.5 IN) LG. 254MM FAN MOUNTING HEIGHT, INCLUDES 3-BELTS, FAN DRIVE
FOR USE WITH @@@@@ 3N-7211@@@@@
AN ATTACHMENT
9L-1554 V-BELT SET
9L-1554 V-BELT SET
1321MM (52 IN) LG
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
128-2898 COVER GP-VALVE MECHANISM
128-2898 COVER GP-VALVE MECHANISM
FOR USE WITH @@@@@ 6C-9480@@@@@
AN ATTACHMENT
COVER GP-VALVE MECHANISM
8N-4446 COVER GP-VALVE MECHANISM
8N-4446 COVER GP-VALVE MECHANISM
VALVE MECHANISM GP
7N-8024 VALVE MECHANISM GP
7N-8024 VALVE MECHANISM GP
S/N 10E300-4488
VALVE MECHANISM GP
7N-8024 VALVE MECHANISM GP
7N-8024 VALVE MECHANISM GP
Type 2
VALVE MECHANISM GP
7N-8024 VALVE MECHANISM GP
7N-8024 VALVE MECHANISM GP
S/N 10E4489-UP
Type 1
COVER GP-ENGINE
391-8229 KIT-FRONT COVER GASKET
391-8229 KIT-FRONT COVER GASKET -FRONT STRUCTURE
FIELD INSTALLATION

Information:

(For parts list, see above)

Service Magazine
New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group{0779,0781}
1987/07/06
Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Disassembly and Assembly
Balancer Shafts (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Balancer Shaft Bearings (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Balancer Shafts (3304)
3304B & 3306B MARINE ENGINES
Balancer Shaft Bearings (3304)
3304B & 3306B MARINE ENGINES
Specifications
Belt Tension Chart
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fan Drive Belt Tightener
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Engine News
New 8T2998 Lubricant Available
1986/03/01
New Camshafts Used; Camshaft Installation Kits Available
1989/04/01
Remanufactured Camshafts And Cam Kits Available For Parts Service
1990/12/01
Correction For Camshaft And Valve Seat Specifications
1992/07/01
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Specifications
Camshaft
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Camshaft
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft
3304B & 3306B MARINE ENGINES
Camshaft Bearings
3304B & 3306B MARINE ENGINES
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Specifications
Front Power Take-off Clutch Adapter
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
Clutch (PTO) Warranty On Morbark Industries Products Powered By Caterpillar Engines{7758}
1992/07/20
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed
1979/06/06
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
New Rear Crankshaft Seal Group Used
1984/07/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
New Front Crankshaft Seal Used{1160,1202}
1991/03/01
A New Type of Main Bearing is Available {1203}
2006/01/02
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Rear Crankshaft Gear And Accessory Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Hub And Damper
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Vibration Damper & Pulley (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3304B & 3306B MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Crankshaft Pulley (3304)
3304B & 3306B MARINE ENGINES
Crankshaft
3304B & 3306B MARINE ENGINES
Crankshaft Rear Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Rear Crankshaft Seal Group Used {1161}
1984/06/25
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
A New Type of Main Bearing is Available {1203}
2004/09/27
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material
1982/10/20
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Remanufactured Short Blocks Available For All 3304 Engines
1987/08/01
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75" Bore Cylinder Blocks
1990/12/01
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service
1991/05/01
Be Sure To Use Correct Cup Plugs On OR2077, OR2554, And OR3258 Remanufactured 3304 And 3306 Short Blocks
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Installation of 0R2077 Remanufactured Short Block Group{1200}
Installation of 0R2077 Remanufactured Short Block Group{1200}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Piston Cooling Jet
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Liner
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Liner Projection
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Connecting Rod And Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Cylinder Head Assembly &amp; Spacer Plate
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Pack
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Piston Cooling Orifices
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Head Assembly And Spacer Plate
3304B & 3306B MARINE ENGINES
Cylinder Liners
3304B & 3306B MARINE ENGINES
Crankshaft Main Bearings
3304B & 3306B MARINE ENGINES
Camshaft Bearings
3304B & 3306B MARINE ENGINES
Piston Cooling Orifices
3304B & 3306B MARINE ENGINES
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control
1983/10/26
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines
1987/03/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads
1988/06/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Cylinder Head Gasket Used
1992/02/01
Correction For Camshaft And Valve Seat Specifications
1992/07/01
New Valve Guide Available {1104}
1995/12/20
New Cast Iron Valve Guide And New Exhaust Valve With Chrome Plated Stem Will Help Prevent Early Hour Exhaust Valve Sticking{1104,1105}
1998/05/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New Specification For Reusability of the Intake Valve and the Exhaust Valve {1105}
2002/05/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Later Pre-Chamber Cylinder Heads On Early 3304 Engines Without Drilled Rocker Stands Are Used {1100}
2012/10/15
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Valves
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Head
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Valve Cover (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Cover (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Head Assembly &amp; Spacer Plate
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valves
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Guides
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Water Directors
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Head Assembly And Spacer Plate
3304B & 3306B MARINE ENGINES
Valves
3304B & 3306B MARINE ENGINES
Valve Guides
3304B & 3306B MARINE ENGINES
Valve Seat Inserts
3304B & 3306B MARINE ENGINES
Water Directors
3304B & 3306B MARINE ENGINES
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control{1109}
1983/09/26
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
New Cylinder Head Gasket Used{1124,1100,1101}
1992/02/17
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
New Valve Guide Available{1104}
1995/12/25
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Later Pre-Chamber Cylinder Heads On Early 3304 Engines Without Drilled Rocker Stands Are Used {1100}
2012/10/11
Specifications
Crankshaft Hub And Damper
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Pulley (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Vibration Damper &amp; Pulley (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley (3304)
3304B & 3306B MARINE ENGINES
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Specifications
Rear Crankshaft Gear And Accessory Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Auxiliary Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Specifications
Rear Crankshaft Gear And Accessory Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Auxiliary Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Engine News
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Remanufactured Water Pump Groups Include Cast Iron Impellers{1361}
1997/01/22
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Installing 3S6610 Water Pump Cage{1361}
Installing 3S6610 Water Pump Cage{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Water Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Water Pump
3304B & 3306B MARINE ENGINES
Service Magazine
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Water Pump Oil Seal Prevents Leaks{1361}
1983/10/10
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Water Pump Gives More Pressure{1361}
1978/09/04
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}
1997/01/20
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Installing 3S6610 Water Pump Cage{1361}
Installing 3S6610 Water Pump Cage{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Water Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Service Magazine
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Water Pump Gives More Pressure{1361}
1978/09/04
New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}
1997/01/20
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Specifications
Flywheel
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Disassembly and Assembly
Flywheel
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Flywheel
3304B & 3306B MARINE ENGINES
Flywheel Housing
3304B & 3306B MARINE ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group{0779,0781}
1987/07/06
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Engine News
New Front Housing Assembly And Gaskets Used
1980/12/10
New Front Crankshaft Seal Used{1160,1202}
1991/03/01
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque
1993/06/01
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups
1993/06/01
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Rear Crankshaft Gear And Accessory Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gears
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gear Cover
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Gear Oil Pressure
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Crankshaft Front Seal &amp; Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Gauge Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gears
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gear Plate
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Timing Gear Cover
3304B & 3306B MARINE ENGINES
Timing Gears
3304B & 3306B MARINE ENGINES
Timing Gear Plate
3304B & 3306B MARINE ENGINES
Service Magazine
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque {1206}
1993/06/14
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
New Rear Crankshaft Seal Group Used
1984/07/11
Specifications
Flywheel Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Flywheel
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal &amp; Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Flywheel Housing
3304B & 3306B MARINE ENGINES
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
New Rear Crankshaft Seal Group Used {1161}
1984/06/25
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group{0779,0781}
1987/07/06
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Engine News
New Front Housing Assembly And Gaskets Used
1980/12/10
New Front Crankshaft Seal Used{1160,1202}
1991/03/01
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups
1993/06/01
Specifications
Timing Gears
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gear Cover
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Crankshaft Front Seal &amp; Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Gauge Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gears
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gear Plate
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Timing Gear Cover
3304B & 3306B MARINE ENGINES
Timing Gears
3304B & 3306B MARINE ENGINES
Timing Gear Plate
3304B & 3306B MARINE ENGINES
Service Magazine
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque {1206}
1993/06/14
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed
1979/06/06
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores
1980/08/13
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
New Rear Crankshaft Seal Group Used
1984/07/11
New Camshafts Used; Camshaft Installation Kits Available
1989/04/01
New Front Crankshaft Seal Used{1160,1202}
1991/03/01
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly
1991/04/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Crankshaft Front Seal &amp; Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Balancer Shafts (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Balancer Shaft Bearings (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal &amp; Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Crankshaft Rear Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
New Piston Ring Group Available For Higher Horsepower Applications{1215,1214,1213,1226}
1983/05/09
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control{1109}
1983/09/26
New Water Pump Oil Seal Prevents Leaks{1361}
1983/10/10
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Fuel System Manual Bleed Valve Removed; Drain Lines Group Added{1251,1253,1286}
1984/02/13
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Water Pump Gives More Pressure{1361}
1978/09/04
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/04/15
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
New Cylinder Head Gasket Used{1124,1100,1101}
1992/02/17
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Disassembly and Assembly
Front Support
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Front Support
3304B & 3306B MARINE ENGINES
Service Magazine
0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/11/29
Disassembly and Assembly
Oil Pan
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Oil Pan Plate 1302-010
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Oil Pan
3304B & 3306B MARINE ENGINES
Oil Pan Plate
3304B & 3306B MARINE ENGINES
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Engine News
&quot;Off-Size&quot; Bearing Kits Available
1991/10/01
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores
1980/08/13
Engine Slobbering; New Piston And Rings Used
1981/10/21
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material
1982/10/20
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01
New Oil Control Piston Ring Used In 3300 Family Of Engines
1990/04/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
New Piston For Marine Auxiliary And Industrial Engines Reduces Light Load Oil Consumption {1214}
2004/05/01
A New Connecting Rod Bearing is Available for Certain Commercial Engines {1219, 1225}
2009/01/05
A New Connecting Rod Bearing is Available {1218, 1219, 1225}
2009/02/09
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Specifications
Connecting Rod
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Pistons And Rings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Connecting Rod And Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER PACKS FOR CERTAIN 3126/B, 3304/B, 3306/B, C9, C12, C13, 3412E, C30, 3512C, 3516C, G3508/B, G3516B, G3520B ENGINE MODELS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER PACKS FOR CERTAIN 3126/B, 3304/B, 3306/B, C9, C12, C13, 3412E, C30, 3512C, 3516C, G3508/B, G3516B, G3520B ENGINE MODELS
Disassembly and Assembly
Pistons &amp; Connecting Rods
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Pack
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Connecting Rod Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Pistons And Connecting Rods
3304B & 3306B MARINE ENGINES
Connecting Rod Bearings
3304B & 3306B MARINE ENGINES
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores{1213,1214}
1980/08/11
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Piston Ring Group Available For Higher Horsepower Applications{1215,1214,1213,1226}
1983/05/09
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Guidelines for Inspecting Pistons {1214}
2006/01/02
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Low Coolant Level Plate In Radiator May Cause False Coolant Level Readings {1353}
1994/01/17
Specifications
Front Power Take-off Clutch Adapter
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Disassembly and Assembly
Front Power Take-Off
3304B & 3306B MARINE ENGINES
Service Magazine
Clutch (PTO) Warranty On Morbark Industries Products Powered By Caterpillar Engines{7758}
1992/07/20
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22
Engine News
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Crankshaft Hub And Damper
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Crankshaft Pulley (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Vibration Damper &amp; Pulley (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley (3304)
3304B & 3306B MARINE ENGINES
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Engine News
New 6V87 Gauge Measures Valve Stem Wear
1979/01/10
Separate Valve Stem Gauges Available
1982/08/25
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group{0779,0781}
1987/07/06
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Belt Tension Chart
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Service Magazine
Fuel System Manual Bleed Valve Removed; Drain Lines Group Added{1251,1253,1286}
1984/02/13
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control
1983/10/26
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines
1987/03/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads
1988/06/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly
1991/04/01
7S3161 Valve Lifter Has Three Different Designs
1991/10/01
New Cylinder Head Gasket Used
1992/02/01
Correction For Camshaft And Valve Seat Specifications
1992/07/01
New Cast Iron Valve Guide And New Exhaust Valve With Chrome Plated Stem Will Help Prevent Early Hour Exhaust Valve Sticking{1104,1105}
1998/05/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Specifications
Valve Rocker Arms And Lifters
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Cover
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Oil Breather Cap
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Valve Cover (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Cover (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assembly &amp; Push Rods
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Lifters
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Cover
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly And Push Rods
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly
3304B & 3306B MARINE ENGINES
Valve Lifters
3304B & 3306B MARINE ENGINES
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control{1109}
1983/09/26
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/04/15
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
New Cylinder Head Gasket Used{1124,1100,1101}
1992/02/17
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Disassembly and Assembly
Flywheel Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3304B & 3306B MARINE ENGINES
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.