ENGINE ARRANGEMENT
ENGINE ARBASIC ENGINE
CRANKSHAFT GPAIR COMPRESSOR GP
ENGINE ARRANGEMENT
ENGINE AR#SEBP14000010
4W-3918: ENGINE AR
Parts for your 3304 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
3N-2886 Y | [1] | ADAPTER GP-SEAL (CRANKSHAFT) | ||
1W-2872 Y | [1] | BALANCER GP | ||
1P-4244 Y | [1] | BREATHER GP | ||
1N-4436 Y | [1] | CAMSHAFT GP | ||
2W-6953 Y | [1] | COOLER GP-FLTR BASE & ENG OIL | ||
7N-1714 Y | [1] | COVER GP-CYLINDER BLOCK | ||
2P-6530 Y | [1] | COVER GP-CYLINDER HEAD | ||
2P-6528 Y | [1] | COVER GP-FRONT HOUSING | ||
8N-4446 Y | [1] | COVER GP-VALVE MECHANISM | ||
6N-8080 Y | [1] | CRANKSHAFT GP | ||
7N-6553 Y | [1] | CYLINDER BLOCK GP | ||
7N-6544 Y | [1] | CYLINDER HEAD GP | ||
7N-9534 Y | [1] | FASTENER GP-CYLINDER HEAD | ||
1W-3793 Y | [1] | FASTENER GP-EXHAUST MANIFOLD | ||
1W-3802 Y | [1] | FASTENER GP-FRONT HOUSING | ||
2P-6855 Y | [1] | FILLER GP-ENGINE OIL | ||
1W-9532 Y | [1] | FILTER GP-FUEL | ||
6N-9026 Y | [1] | FLYWHEEL GP | ||
3N-2925 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
1W-5634 Y | [1] | GEAR GP-FRONT (TIMING) | ||
7N-1717 Y | [1] | GEAR GP-REAR | ||
1W-4759 Y | [1] | HOUSING GP-FLYWHEEL | ||
8N-0303 Y | [1] | HOUSING GP-FRONT | ||
7N-9122 Y | [1] | LIFTING GP-ENGINE | ||
8N-4702 Y | [1] | LINES GP-AIR | ||
2P-6512 Y | [1] | LINES GP-ENGINE OIL | ||
1W-9533 Y | [1] | LINES GP-FUEL DRAIN | ||
8N-2772 Y | [1] | LINES GP-FUEL INJECTION | ||
1W-0558 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
2W-6779 Y | [1] | LINES GP-WATER | ||
2P-6571 Y | [1] | MANIFOLD GP-EXHAUST | ||
4N-7142 Y | [1] | PAN GP-OIL | ||
2W-1177 Y | [4] | PISTON & ROD GP | ||
3N-2884 Y | [1] | PULLEY GP-CRANKSHAFT | ||
2W-4160 Y | [1] | PUMP & MTG GP-FUEL TRANSFER | ||
2P-1784 Y | [1] | PUMP GP-ENGINE OIL | ||
4W-1875 Y | [1] | PUMP GP-FUEL PRIMING | ||
2W-1736 Y | [1] | PUMP GP-GOV & FUEL INJ | ||
7N-5909 Y | [1] | PUMP GP-WATER | ||
2P-7308 Y | [1] | SEAL GP-CRANKSHAFT | ||
7N-0744 Y | [1] | SUPPORT GP-ENGINE | ||
7N-4650 Y | [1] | TURBOCHARGER GP | ||
7N-8024 Y | [1] | VALVE MECHANISM GP | ||
AVAILABLE GASKET KIT(S): | ||||
6V-7459 | KIT-GASKET (CENTRAL, LOWER STRUCTURE) | |||
6V-4763 | KIT-GASKET (FRONT STRUCTURE) | |||
8T-4856 | KIT-GASKET (FUEL SYSTEM) | |||
5P-9102 | KIT-GASKET (OIL COOLER, LINES) | |||
6V-6391 | KIT-GASKET (REAR STRUCTURE) | |||
6V-7458 | KIT-CYLINDER HEAD GASKET | |||
5P-8768 | KIT-GASKET (SINGLE CYLINDER LINER) | |||
6V-0616 | KIT-GASKET (TURBOCHARGER) | |||
170-1834 | KIT-GASKET (WATER PUMP) | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP14000011
4W-6878: ENGINE AR
4W-6878 ENGINE AR
MOBILE
MOBILE
Parts for your 3304 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
3N-5658 Y | [1] | ADAPTER GP-FAN | ||
3N-2886 Y | [1] | ADAPTER GP-SEAL (CRANKSHAFT) | ||
5N-9336 Y | [1] | AIR CLEANER GP | ||
9N-8069 Y | [1] | AIR COMPRESSOR GP | ||
6N-9294 Y | [1] | ALTERNATOR GP-CHARGING | ||
1W-2872 Y | [1] | BALANCER GP | ||
1P-4244 Y | [1] | BREATHER GP | ||
1N-4436 Y | [1] | CAMSHAFT GP | ||
1N-5331 Y | [1] | CONTROL GP-GOVERNOR | ||
2W-6953 Y | [1] | COOLER GP-FLTR BASE & ENG OIL | ||
2W-0102 Y | [1] | COVER GP-CYLINDER BLOCK | ||
2P-6530 Y | [1] | COVER GP-CYLINDER HEAD | ||
4N-6050 Y | [1] | COVER GP-FRONT HOUSING | ||
8N-4446 Y | [1] | COVER GP-VALVE MECHANISM | ||
6N-8080 Y | [1] | CRANKSHAFT GP | ||
7N-6553 Y | [1] | CYLINDER BLOCK GP | ||
7N-6544 Y | [1] | CYLINDER HEAD GP | ||
3N-7019 Y | [1] | DRIVE GP-FAN | ||
4N-4684 Y | [1] | FAN GP-BLOWER | ||
7N-9534 Y | [1] | FASTENER GP-CYLINDER HEAD | ||
1W-3793 Y | [1] | FASTENER GP-EXHAUST MANIFOLD | ||
1W-3802 Y | [1] | FASTENER GP-FRONT HOUSING | ||
5N-7462 Y | [1] | FILLER GP-ENGINE OIL | ||
1W-9532 Y | [1] | FILTER GP-FUEL | ||
7N-3496 Y | [1] | FLYWHEEL GP | ||
1W-6401 Y | [1] | GAUGE GP-FUEL PRESSURE | ||
2W-3247 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
1W-5634 Y | [1] | GEAR GP-FRONT (TIMING) | ||
8N-0888 Y | [1] | REGULATOR GP-TEMPERATURE | ||
8N-2322 Y | [1] | HOUSING GP-FLYWHEEL | ||
8N-0303 Y | [1] | HOUSING GP-FRONT | ||
8N-3286 Y | [1] | LIFTING GP-ENGINE | ||
2P-0969 Y | [1] | LINES GP-AIR | ||
4W-7286 Y | [1] | LINES GP-AIR | ||
8N-6046 Y | [1] | LINES GP-AIR COMPRESSOR | ||
2P-6512 Y | [1] | LINES GP-ENGINE OIL | ||
5N-0379 Y | [1] | LINES GP-FLEXIBLE FUEL | ||
2W-6237 Y | [1] | LINES GP-FUEL INJECTION | ||
8N-3000 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
2W-6779 Y | [1] | LINES GP-WATER | ||
2P-6571 Y | [1] | MANIFOLD GP-EXHAUST | ||
2W-0693 Y | [1] | METER GP-SERVICE | ||
8N-6019 Y | [1] | MOUNTING GP-ALTERNATOR | ||
4N-7142 Y | [1] | PAN GP-OIL | ||
2W-1177 Y | [4] | PISTON & ROD GP | ||
3N-2884 Y | [1] | PULLEY GP-CRANKSHAFT | ||
3N-5626 Y | [1] | PULLEY GP-FAN DRIVE | ||
2W-4160 Y | [1] | PUMP & MTG GP-FUEL TRANSFER | ||
2P-1784 Y | [1] | PUMP GP-ENGINE OIL | ||
Y | [1] | PUMP GP-FUEL PRM & PRIM FILTER | ||
2W-1736 Y | [1] | PUMP GP-GOV & FUEL INJ | ||
7N-5908 Y | [1] | PUMP GP-WATER | ||
2P-6224 Y | [1] | SEAL GP-CRANKSHAFT | ||
9L-1630 | [1] | V-BELT SET (INCLUDES 3 BELTS) | ||
2W-8197 Y | [1] | SHUTOFF GP-ELECTRICAL | ||
1W-3851 Y | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | ||
3N-2883 Y | [1] | SUPPORT GP-ENGINE | ||
7N-4650 Y | [1] | TURBOCHARGER GP | ||
7N-8024 Y | [1] | VALVE MECHANISM GP | ||
GASKET KITS WILL BE PROVIDED WHEN AVAILABLE | ||||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP14000012
4W-7765: ENGINE AR
Parts for your 3304 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
3N-5658 Y | [1] | ADAPTER GP-FAN | ||
3N-2886 Y | [1] | ADAPTER GP-SEAL (CRANKSHAFT) | ||
1W-2872 Y | [1] | BALANCER GP | ||
1P-4244 Y | [1] | BREATHER GP | ||
1N-4436 Y | [1] | CAMSHAFT GP | ||
2W-6953 Y | [1] | COOLER GP-FLTR BASE & ENG OIL | ||
2W-0102 Y | [1] | COVER GP-CYLINDER BLOCK | ||
2P-6530 Y | [1] | COVER GP-CYLINDER HEAD | ||
2P-6528 Y | [1] | COVER GP-FRONT HOUSING | ||
8N-4446 Y | [1] | COVER GP-VALVE MECHANISM | ||
6N-8080 Y | [1] | CRANKSHAFT GP | ||
7N-6553 Y | [1] | CYLINDER BLOCK GP | ||
7N-6544 Y | [1] | CYLINDER HEAD GP | ||
3N-6987 Y | [1] | DRIVE GP-FAN | ||
1W-9010 Y | [1] | DRIVE GP-TACHOMETER | ||
7N-9534 Y | [1] | FASTENER GP-CYLINDER HEAD | ||
1W-3802 Y | [1] | FASTENER GP-FRONT HOUSING | ||
2P-6855 Y | [1] | FILLER GP-ENGINE OIL | ||
1W-9532 Y | [1] | FILTER GP-FUEL | ||
3N-3392 Y | [1] | FUMES DISPOSAL GP | ||
1W-6401 Y | [1] | GAUGE GP-FUEL PRESSURE | ||
3N-2925 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
1W-5634 Y | [1] | GEAR GP-FRONT (TIMING) | ||
8N-0888 Y | [1] | REGULATOR GP-TEMPERATURE | ||
6N-5233 Y | [1] | HOUSING GP-FLYWHEEL | ||
8N-0303 Y | [1] | HOUSING GP-FRONT | ||
6N-8336 Y | [1] | LIFTING GP-ENGINE | ||
8N-1208 Y | [1] | LINES GP-AIR | ||
2P-6512 Y | [1] | LINES GP-ENGINE OIL | ||
1W-9533 Y | [1] | LINES GP-FUEL DRAIN | ||
1W-8696 Y | [1] | LINES GP-FUEL INJECTION | ||
7W-2228 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
2W-6779 Y | [1] | LINES GP-WATER | ||
2W-0270 Y | [1] | MANIFOLD GP-EXHAUST | ||
3N-2924 Y | [1] | PAN GP-OIL | ||
2W-1177 Y | [4] | PISTON & ROD GP | ||
3N-2884 Y | [1] | PULLEY GP-CRANKSHAFT | ||
6N-6703 Y | [1] | PULLEY GP-FAN DRIVE | ||
2W-4160 Y | [1] | PUMP & MTG GP-FUEL TRANSFER | ||
2P-1784 Y | [1] | PUMP GP-ENGINE OIL | ||
4W-1875 Y | [1] | PUMP GP-FUEL PRIMING | ||
2W-1736 Y | [1] | PUMP GP-GOV & FUEL INJ | ||
7N-5909 Y | [1] | PUMP GP-WATER | ||
2P-6224 Y | [1] | SEAL GP-CRANKSHAFT | ||
7N-0744 Y | [1] | SUPPORT GP-ENGINE | ||
2W-0413 Y | [1] | TURBOCHARGER GP | ||
7N-8024 Y | [1] | VALVE MECHANISM GP | ||
GASKET KITS WILL BE PROVIDED WHEN AVAILABLE | ||||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP14000013
6C-0822: ENGINE AR
6C-0822 ENGINE AR
MOBILE
MOBILE
Parts for your 3304 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
3N-2886 Y | [1] | ADAPTER GP-SEAL (CRANKSHAFT) | ||
1W-2872 Y | [1] | BALANCER GP | ||
1P-4244 Y | [1] | BREATHER GP | ||
1N-4436 Y | [1] | CAMSHAFT GP | ||
2W-6953 Y | [1] | COOLER GP-FLTR BASE & ENG OIL | ||
2W-0102 Y | [1] | COVER GP-CYLINDER BLOCK | ||
2P-6530 Y | [1] | COVER GP-CYLINDER HEAD | ||
4W-6309 Y | [1] | COVER GP-FLYWHEEL HOUSING | ||
2P-6528 Y | [1] | COVER GP-FRONT HOUSING | ||
8N-4446 Y | [1] | COVER GP-VALVE MECHANISM | ||
6N-8080 Y | [1] | CRANKSHAFT GP | ||
7N-6553 Y | [1] | CYLINDER BLOCK GP | ||
7N-6544 Y | [1] | CYLINDER HEAD GP | ||
7N-9534 Y | [1] | FASTENER GP-CYLINDER HEAD | ||
1W-3793 Y | [1] | FASTENER GP-EXHAUST MANIFOLD | ||
1W-3802 Y | [1] | FASTENER GP-FRONT HOUSING | ||
2P-6855 Y | [1] | FILLER GP-ENGINE OIL | ||
1W-9532 Y | [1] | FILTER GP-FUEL | ||
7N-3496 Y | [1] | FLYWHEEL GP | ||
3N-2925 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
1W-5634 Y | [1] | GEAR GP-FRONT (TIMING) | ||
8N-2322 Y | [1] | HOUSING GP-FLYWHEEL | ||
8N-0303 Y | [1] | HOUSING GP-FRONT | ||
6N-8326 Y | [1] | LIFTING GP-ENGINE | ||
8N-4702 Y | [1] | LINES GP-AIR | ||
2P-6512 Y | [1] | LINES GP-ENGINE OIL | ||
1W-9533 Y | [1] | LINES GP-FUEL DRAIN | ||
8N-2772 Y | [1] | LINES GP-FUEL INJECTION | ||
S/N 10E300-4908 | ||||
2W-6237 Y | [1] | LINES GP-FUEL INJECTION | ||
S/N 10E4909-UP | ||||
1W-0558 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
S/N 10E300-4908 | ||||
8N-3000 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
S/N 10E4909-UP | ||||
2W-6779 Y | [1] | LINES GP-WATER | ||
2P-6571 Y | [1] | MANIFOLD GP-EXHAUST | ||
4N-7142 Y | [1] | PAN GP-OIL | ||
2W-1177 Y | [4] | PISTON & ROD GP | ||
S/N 10E300-5634 | ||||
168-4532 Y | [4] | PISTON & ROD GP | ||
S/N 10E5635-UP | ||||
3N-2884 Y | [1] | PULLEY GP-CRANKSHAFT | ||
2W-4160 Y | [1] | PUMP & MTG GP-FUEL TRANSFER | ||
2P-1784 Y | [1] | PUMP GP-ENGINE OIL | ||
4W-1875 Y | [1] | PUMP GP-FUEL PRIMING | ||
2W-1736 Y | [1] | PUMP GP-GOV & FUEL INJ | ||
7N-5909 Y | [1] | PUMP GP-WATER | ||
2P-6224 Y | [1] | SEAL GP-CRANKSHAFT | ||
7N-0744 Y | [1] | SUPPORT GP-ENGINE | ||
7N-4650 Y | [1] | TURBOCHARGER GP | ||
7N-8024 Y | [1] | VALVE MECHANISM GP | ||
AVAILABLE GASKET KIT(S): | ||||
141-7953 | KIT-GASKET (CENTRAL, LOWER STRUCTURE) | |||
140-2246 | KIT-GASKET (FRONT STRUCTURE) | |||
141-7862 | KIT-GASKET (FUEL SYSTEM) | |||
149-1190 | KIT-GASKET (OIL COOLER, LINES) | |||
6V-2983 | KIT-GASKET (REAR STRUCTURE) | |||
8T-1606 | KIT-GASKET (SINGLE CYLINDER HEAD) | |||
5P-8768 | KIT-GASKET (SINGLE CYLINDER LINER) | |||
6V-0616 | KIT-GASKET (TURBOCHARGER) | |||
170-1834 | KIT-GASKET (WATER PUMP) | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP14000014
9Y-6208: ENGINE AR
Parts for your 3304 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
3N-2886 Y | [1] | ADAPTER GP-SEAL (CRANKSHAFT) | ||
1W-2872 Y | [1] | BALANCER GP | ||
1P-4244 Y | [1] | BREATHER GP | ||
1N-4436 Y | [1] | CAMSHAFT GP | ||
2W-6953 Y | [1] | COOLER GP-FLTR BASE & ENG OIL | ||
2W-0102 Y | [1] | COVER GP-CYLINDER BLOCK | ||
2P-6530 Y | [1] | COVER GP-CYLINDER HEAD | ||
4N-6050 Y | [1] | COVER GP-FRONT HOUSING | ||
5R-4136 Y | [1] | COVER GP-FRONT HOUSING | ||
8N-4446 Y | [1] | COVER GP-VALVE MECHANISM | ||
6N-8080 Y | [1] | CRANKSHAFT GP | ||
7N-6553 Y | [1] | CYLINDER BLOCK GP | ||
7N-6544 Y | [1] | CYLINDER HEAD GP | ||
7N-9534 Y | [1] | FASTENER GP-CYLINDER HEAD | ||
1W-3802 Y | [1] | FASTENER GP-FRONT HOUSING | ||
4W-6967 Y | [1] | FILLER GP-ENGINE OIL | ||
1W-9532 Y | [1] | FILTER GP-FUEL | ||
8L-5077 Y | [1] | FLYWHEEL GP | ||
2W-3247 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
1W-5634 Y | [1] | GEAR GP-FRONT (TIMING) | ||
6N-5233 Y | [1] | HOUSING GP-FLYWHEEL | ||
8N-0303 Y | [1] | HOUSING GP-FRONT | ||
6N-8336 Y | [1] | LIFTING GP-ENGINE | ||
8N-1208 Y | [1] | LINES GP-AIR | ||
2P-6512 Y | [1] | LINES GP-ENGINE OIL | ||
9Y-6336 Y | [1] | LINES GP-FUEL DRAIN | ||
1W-8696 Y | [1] | LINES GP-FUEL INJECTION | ||
7W-2228 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
2W-6779 Y | [1] | LINES GP-WATER | ||
2W-0270 Y | [1] | MANIFOLD GP-EXHAUST | ||
4N-7142 Y | [1] | PAN GP-OIL | ||
1W-6588 Y | [4] | PISTON & ROD GP | ||
3N-2884 Y | [1] | PULLEY GP-CRANKSHAFT | ||
2W-4160 Y | [1] | PUMP & MTG GP-FUEL TRANSFER | ||
2P-1784 Y | [1] | PUMP GP-ENGINE OIL | ||
2W-1736 Y | [1] | PUMP GP-GOV & FUEL INJ | ||
7N-5909 Y | [1] | PUMP GP-WATER | ||
2P-6224 Y | [1] | SEAL GP-CRANKSHAFT | ||
3N-2883 Y | [1] | SUPPORT GP-ENGINE | ||
9Y-6184 Y | [1] | TURBOCHARGER GP | ||
7N-8024 Y | [1] | VALVE MECHANISM GP | ||
AVAILABLE GASKET KIT(S): | ||||
6V-7459 | KIT-GASKET (CENTRAL, LOWER STRUCTURE) | |||
9X-8563 | KIT-GASKET (FRONT STRUCTURE) | |||
9X-8564 | KIT-GASKET (FUEL SYSTEM) | |||
8T-9483 | KIT-GASKET (OIL COOLER, LINES) | |||
6V-2985 | KIT-GASKET (REAR STRUCTURE) | |||
8T-1606 | KIT-GASKET (SINGLE CYLINDER HEAD) | |||
5P-8768 | KIT-GASKET (SINGLE CYLINDER LINER) | |||
6V-0616 | KIT-GASKET (TURBOCHARGER) | |||
6V-4750 | KIT-GASKET (WATER PUMP) | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP14000015
3N-2886: ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL -CRANKSHAFT
FRONT
FRONT
#SEBP14000016
109-1317: AIR COMPRESSOR GP
109-1317 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM
PART OF 110-5765 AIR COMPRESSOR GP
FIELD REPLACEMENT ORDER @@@@@110-5764@@@@@
AN ATTACHMENT
13.2 CFM AT 1250 RPM
PART OF 110-5765 AIR COMPRESSOR GP
FIELD REPLACEMENT ORDER @@@@@110-5764@@@@@
AN ATTACHMENT
Parts for your 3304 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 0L-1352 | [5] | BOLT (3/8-16X3.25-IN) | |
2. | 4P-3977 | [1] | GASKET-CYLINDER HEAD | |
3. | 0S-1617 | [14] | BOLT (5/16-18X0.75-IN) | |
4. | 4P-3966 | [1] | PISTON & ROD AS | |
(INCLUDES 2 PISTONS & 2 ROD AS.) | ||||
5. | 7E-8928 | [1] | GASKET | |
6. | 9M-1974 | [16] | WASHER-HARD (8.8X16X2-MM THK) | |
7. | 6V-0387 | [1] | PLUG-PIPE | |
8. | 8T-6764 | [2] | PLUG-PIPE (1/8-27-THD) | |
9. | 7C-6178 | [2] | BEARING-REAR | |
10. | 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | |
11. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
12. | 7W-5499 | [1] | ELBOW | |
13. | 8M-7065 | [1] | GASKET (AIR INLET) | |
14. | 2B-2695 | [2] | BOLT (5/16-18X0.875-IN) | |
15. | 124-5572 | [1] | VALVE AS-RELIEF (AIR COMPRESSOR) | |
AVAILABLE REPAIR KIT(S): | ||||
7E-8923 | [1] | KIT-CRANKSHAFT BEARING (AIR COMPRESSOR) | ||
(INCLUDES SEALS, BEARINGS, INSERTS, GASKETS, & WASHERS) | ||||
7E-8925 | [1] | KIT-STANDARD RING (AIR COMPRESSOR) | ||
(INCLUDES STD PISTON, PSTN SEG, & STD SPACER RINGS) | ||||
7E-8926 | [1] | KIT-CYLINDER HEAD (AIR COMPRESSOR) | ||
(INCLUDES GASKETS, SPRINGS, VALVES,SEATS, O-RING, PISTON, & STOP) | ||||
150-5146 | [1] | KIT-UNLOADER (AIR COMPRESSOR) |
#SEBP14000017
109-1318: AIR COMPRESSOR GP
109-1318 AIR COMPRESSOR GP
S/N 10E300-5449
16.5 CFM AT 1250 RPM
PART OF 110-5767 AIR COMPRESSOR GP
FIELD REPLACEMENT ORDER @@@@@110-5766@@@@@
AN ATTACHMENT
S/N 10E300-5449
16.5 CFM AT 1250 RPM
PART OF 110-5767 AIR COMPRESSOR GP
FIELD REPLACEMENT ORDER @@@@@110-5766@@@@@
AN ATTACHMENT
Parts for your 3304 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 0L-1352 | [5] | BOLT (3/8-16X3.25-IN) | |
2. | 4P-3977 | [1] | GASKET-CYLINDER HEAD | |
3. | 0S-1617 | [14] | BOLT (5/16-18X0.75-IN) | |
4. | 7E-8924 | [1] | PISTON & ROD AS | |
(INCLUDES 2 PISTONS & 2 ROD AS.) | ||||
5. | 7E-8928 | [1] | GASKET | |
6. | 9M-1974 | [16] | WASHER-HARD (8.8X16X2-MM THK) | |
7. | 6V-0387 | [1] | PLUG-PIPE | |
8. | 8T-6764 | [2] | PLUG-PIPE (1/8-27-THD) | |
9. | 7C-6178 | [2] | BEARING-REAR | |
10. | 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | |
11. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
12. | 7W-5499 | [1] | ELBOW | |
13. | 8M-7065 | [1] | GASKET (AIR INLET) | |
14. | 2B-2695 | [2] | BOLT (5/16-18X0.875-IN) | |
15. | 124-5572 | [1] | VALVE AS-RELIEF (AIR COMPRESSOR) | |
AVAILABLE REPAIR KIT(S): | ||||
7E-8923 | [1] | KIT-CRANKSHAFT BEARING (AIR COMPRESSOR) | ||
(INCLUDES SEALS, BEARINGS, INSERTS, GASKETS, & WASHERS) | ||||
7E-8925 | [1] | KIT-STANDARD RING (AIR COMPRESSOR) | ||
(INCLUDES STD PISTON, PSTN SEG, & STD SPACER RINGS) | ||||
7E-8926 | [1] | KIT-CYLINDER HEAD (AIR COMPRESSOR) | ||
(INCLUDES GASKETS, SPRINGS, VALVES, SEATS, O-RING, PISTON, & STOP) | ||||
150-5146 | [1] | KIT-UNLOADER (AIR COMPRESSOR) |
#SEBP14000018
110-5764: AIR COMPRESSOR GP
110-5764 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM
PART OF 110-5765 AIR COMPRESSOR GP
FIELD REPLACEMENT FOR @@@@@109-1317@@@@@
AN ATTACHMENT
13.2 CFM AT 1250 RPM
PART OF 110-5765 AIR COMPRESSOR GP
FIELD REPLACEMENT FOR @@@@@109-1317@@@@@
AN ATTACHMENT
Parts for your 3304 ENGINE - MACHINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
150-5146 | [1] | KIT-UNLOADER (AIR COMPRESSOR) |
#SEBP14000019
110-5765: AIR COMPRESSOR GP
110-5765 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM
Type 1
FOR USE WITH @@@@@110-5763@@@@@
AN ATTACHMENT
13.2 CFM AT 1250 RPM
Type 1
FOR USE WITH @@@@@110-5763@@@@@
AN ATTACHMENT
Parts for your 3304 ENGINE - MACHINE:
CATERPILLAR SISInformation:
ENGINE ARRANGEMENT
ENGINE AR
Truck Engine News
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
1983/10/26
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service
1991/05/01
1991/05/01
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1978/01/18
1978/01/18
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/01
2001/01/01
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Technical Information Bulletin
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Information Release Memo
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Industrial Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Industrial Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Industrial Engine {0372, 1000, 7000, 753S, 7565}
Service Magazine
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
1979/07/02
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
1991/05/06
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25
2000/12/25
TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10
2013/01/10
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
Caterpillar Parts SIS Catalog 3304 :
Truck sale:
650
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
- Quick connectors
MILTON CAT
17.000
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
- Stationary Generator Sets
EMPIRE MACHINERY