AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N-0224 CYLINDER HEAD GP S/N 10E587-UP FIELD REPLACEMENT ORDER @@@@@ 1N-4304@@@@@ 3304 ENGINE - MACHINE


BASIC ENGINE
CYLINDER HEAD GP
DRIVE GP-AUXILIARY
DRIVE GP-FAN
DRIVE GP-PUMP

ENGINE - MACHINE 3304 ENGINE - MACHINE 10E
 3304 Industrial Engine 10E00300-UP SEBP1400 3304 10E   (2018)

BASIC ENGINE

CYLINDER HEAD GP
COVER GP-CYLINDER HEAD
2P-6530 COVER GP-CYLINDER HEAD
CYLINDER HEAD GP
1N-4304 CYLINDER HEAD GP
CYLINDER HEAD GP
7N-6544 CYLINDER HEAD GP
CYLINDER HEAD GP
8N-0224 CYLINDER HEAD GP
FASTENER GP-CYLINDER HEAD
7N-9534 FASTENER GP-CYLINDER HEAD
 

#SEBP14000060
 

8N-0224: CYLINDER HEAD GP

8N-0224 CYLINDER HEAD GP
S/N 10E587-UP
FIELD REPLACEMENT ORDER @@@@@ 1N-4304@@@@@
i00428024 SEBP1400
8N0224 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 1W-5300 [8] ROTOCOIL AS  
    (EACH INCLUDES)
3. 6N-7174 [1] SHIELD-OIL  
4. 100-7860 [4] VALVE-INLET  
5. 148-7455 [4] VALVE-EXHAUST  
6. 4P-8915 [1] GASKET-CYLINDER HEAD  
7. 3S-5496 [1] SEAL-O-RING  
8. 9Y-1798 [12] SEAL  
9. 7N-8018 [4] SEAL  
10. 7S-7144 [8] SPRING-VALVE  
11. 148-7425 [8] GUIDE-VALVE  
12. 8T-6762 [3] PLUG-PIPE (1/2-14-THD)  
13. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
14. 3S-8313 [4] PLUG-CUP  
15. 3B-0623 [4] PLUG-CUP  
16. 107-0265 [4] INSERT-VALVE SEAT (EXHAUST)  
17. 107-0268 [4] INSERT-VALVE SEAT (INLET)  
18. 3P-1896 [9] PLUG-CUP  
 

#SEBP14000061
 

138-2780: DRIVE GP-AUXILIARY

138-2780 DRIVE GP-AUXILIARY
FOR USE WITH HIGH CONTACT RATIO SPUR GEAR TRAIN
AN ATTACHMENT
i00509789 SEBP1400
1382780 DRIVE GP-AUXILIARY Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3776 [1] LOCKNUT  
2. 2H-3779 [1] LOCK  
3. 120-6619 [1] GEAR (33-TEETH)  
4. 5F-3106 [1] SEAL-O-RING  
5. 2H-5549 [2] RING-RETAINING  
6. 8H-9789 [2] BALL BEARING  
7. 1W-6254 [1] ADAPTER-AUXILIARY DRIVE  
8. 6L-5274 [1] PULLEY-AUXILIARY DRIVE (2-GROOVE)  
9. 8L-4889 [1] SHAFT-AUXILIARY DRIVE  
10. 0S-1617 [6] BOLT (5/16-18X0.75-IN)  
11. 2H-3910 [1] SEAL-LIP TYPE  
12. 8L-4949 [1] SPACER-BEARING  
 

#SEBP14000062
 

1W-6298: DRIVE GP-AUXILIARY

1W-6298 DRIVE GP-AUXILIARY
CANNOT BE USED WITH HYDRAULIC PUMP DRIVES OR HOOD AND DASH
AN ATTACHMENT
i00352767 SEBP1400
1W6298 DRIVE GP-AUXILIARY Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3776 [1] LOCKNUT  
  2H-3779 [1] LOCK  
2. 8L-4889 [1] SHAFT-AUXILIARY DRIVE  
3. 7N-5848 [1] GEAR (40-TEETH)  
4. 5F-3106 [1] SEAL-O-RING  
5. 1W-6254 [1] ADAPTER-AUXILIARY DRIVE  
6. 2H-3910 [1] SEAL-LIP TYPE  
7. 8H-9789 [2] BALL BEARING  
8. 2H-5549 [2] RING-RETAINING  
9. 0S-1617 [6] BOLT (5/16-18X0.75-IN)  
10. 6L-5274 [1] PULLEY-AUXILIARY DRIVE (2-GROOVE)  
11. 8L-4949 [1] SPACER-BEARING  
 

#SEBP14000063
 

3N-6987: DRIVE GP-FAN

3N-6987 DRIVE GP-FAN
S/N 10E1022-UP
FOR USE WITH SAE NO.1 FLYWHEEL HOUSING
ALSO AN ATTACHMENT
i00366652 SEBP1400
3N6987 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(FAN DRIVE)  
2. 3N-7007 [1] BRACKET AS-FAN  
  5B-5812 [1] DOWEL  
3. 5S-2106 [1] SEAL-LIP TYPE  
4. 2P-1757 [1] HUB-FAN PULLEY  
5. 3L-1425 [1] BALL BEARING  
6. 5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
7. 2M-0849 C [4] WASHER-HARD (13.5X25.5X5-MM THK)  
8. 1H-5403 [2] BOLT (5/16-24X2-IN)  
  2F-6156 [1] LOCKNUT  
    -OR-
  6V-4626 C [2] BOLT-LOCKING (5/16-24X2-IN)  
9. 8N-5305 C [1] SPACER (35.6X47.62X43.74-MM THK)  
10. 8H-9789 [1] BALL BEARING  
11. 5S-9062 [4] SPACER (35.032X50.8X15.88-MM THK)  
12. 7B-3235 [4] BOLT (1/2-13X1.375-IN)  
    -OR-
  0S-1585 [4] BOLT (1/2-13X1.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14000064
 

3N-7019: DRIVE GP-FAN

3N-7019 DRIVE GP-FAN
CENTER IS 6.48 INCH OUT FROM HEAD, CRANK CENTER TO FAN VARIES FROM 13 TO 22 INCH, ADJUSTABLE
ALSO AN ATTACHMENT
i00366661 SEBP1400
3N7019 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-0947 [4] BOLT (1/2-13X2.25-IN)  
2. 9F-8885 [4] SPACER (13.5X24X22.2-MM THK)  
3. 1P-9945 [1] BRACKET AS-FAN  
  1P-9946 [1] SHAFT-FAN  
  5B-5812 [1] DOWEL  
4. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(FAN DRIVE)  
5. 5S-2106 [1] SEAL-LIP TYPE  
6. 8H-9789 [1] BALL BEARING  
7. 2P-1757 [1] HUB-FAN PULLEY  
8. 3L-1425 [1] BALL BEARING  
9. 5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
10. 6V-4626 [2] BOLT-LOCKING (5/16-24X2-IN)  
11. 8N-5305 [1] SPACER (35.6X47.62X43.74-MM THK)  
12. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
 

#SEBP14000065
 

3N-7210: DRIVE GP-FAN

3N-7210 DRIVE GP-FAN
FOR USE WITH FAN PULLEY & ALTERNATOR OR BELT TIGHTENER
AN ATTACHMENT
i00366686 SEBP1400
3N7210 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4682 [1] BRACKET AS  
  5B-5812 [1] DOWEL  
2. 5S-2106 [1] SEAL-LIP TYPE  
3. 3L-1425 [1] BALL BEARING  
4. 5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
5. 1H-5403 [2] BOLT (5/16-24X2-IN)  
  2F-6156 [1] LOCKNUT  
    -OR-
  6V-4626 C [2] BOLT-LOCKING (5/16-24X2-IN)  
6. 2M-0849 [4] WASHER-HARD (13.5X25.5X5-MM THK)  
7. 2P-1757 [1] HUB-FAN PULLEY  
8. 8N-5305 C [1] SPACER (35.6X47.62X43.74-MM THK)  
9. 8H-9789 [1] BALL BEARING  
10. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(FAN DRIVE)  
12. 7B-3235 [4] BOLT (1/2-13X1.375-IN)  
    -OR-
  0S-1585 C [4] BOLT (1/2-13X1.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14000066
 

3N-7397: DRIVE GP-FAN

3N-7397 DRIVE GP-FAN
CENTER IS 6.48 INCH OUT FROM HEAD, CRANK CENTER TO FAN VARIES FROM 12 TO 23 INCH, ADJUSTABLE
AN ATTACHMENT
i00366712 SEBP1400
3N7397 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
2. 3N-7401 [2] ADAPTER  
3. 1P-9945 [1] BRACKET AS-FAN  
  5B-5812 [1] DOWEL  
4. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(FAN DRIVE)  
5. 5S-2106 [1] SEAL-LIP TYPE  
6. 8H-9789 [1] BALL BEARING  
7. 2P-1757 [1] HUB-FAN PULLEY  
8. 3L-1425 [1] BALL BEARING  
9. 5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
10. 6V-4626 C [2] BOLT-LOCKING (5/16-24X2-IN)  
11. 8N-5305 C [1] SPACER (35.6X47.62X43.74-MM THK)  
12. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
13. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
14. 8N-8721 C [1] PLATE-LIFTING EYE  
15. 6V-1999 C [2] BOLT (5/8-11X1.5-IN)  
  8D-5054 C [2] WASHER-HARD (17X30X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14000067
 

3N-7397: DRIVE GP-FAN

3N-7397 DRIVE GP-FAN
S/N 10E4554-UP
CENTER IS 6.48 INCH OUT FROM HEAD, CRANK CENTER TO FAN VARIES FROM 12 TO 23 INCH, ADJUSTABLE
ALSO AN ATTACHMENT
i00366714 SEBP1400
3N7397 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
2. 3N-7401 [2] ADAPTER  
3. 1P-9945 [1] BRACKET AS-FAN  
  5B-5812 [1] DOWEL  
4. 3B-8485 [1] ELBOW (FAN DRIVE)  
5. 5S-2106 [1] SEAL-LIP TYPE  
6. 8H-9789 [1] BALL BEARING  
7. 2P-1757 [1] HUB-FAN PULLEY  
8. 3L-1425 [1] BALL BEARING  
9. 5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
10. 6V-4626 [2] BOLT-LOCKING (5/16-24X2-IN)  
11. 8N-5305 [1] SPACER (35.6X47.62X43.74-MM THK)  
12. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
13. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
 

#SEBP14000068
 

5N-4555: DRIVE GP-FAN

5N-4555 DRIVE GP-FAN
AN ATTACHMENT
i00385029 SEBP1400
5N4555 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7F-1866 [6] BOLT (3/8-16X3-IN)  
2. 3N-8082 [1] PULLEY  
 

#SEBP14000069
 

1W-6192: DRIVE GP-PUMP

1W-6192 DRIVE GP-PUMP
2 BOLT/4 BOLT FLANGE, MOUNTED TO LOWER LH REAR OF PUMP HOUSING
AN ATTACHMENT
i00352731 SEBP1400
1W6192 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5491 [1] GEAR AS (40-TEETH)  
2. 5S-0907 [1] ORIFICE  
3. 5F-3106 [1] SEAL-O-RING  
4. 1W-6015 [1] ADAPTER-BEARING  
5. 8N-5492 [1] RETAINER  
6. 030-7941 [1] ELBOW  
7. 034-8348 [1] HOSE AS (.61M 24IN)  
8. 3B-7764 [1] BUSHING (REDUCING)  
9. 6K-1972 [1] ELBOW-FLARED  
10. 3J-7354 [1] SEAL-O-RING  
11. 1D-4586 [2] BOLT (5/8-11X3.5-IN)  
  5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
12. 1D-4541 [2] BOLT (5/16-18X3-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control
1983/10/26
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines
1987/03/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads
1988/06/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Cylinder Head Gasket Used
1992/02/01
Correction For Camshaft And Valve Seat Specifications
1992/07/01
New Valve Guide Available {1104}
1995/12/20
New Cast Iron Valve Guide And New Exhaust Valve With Chrome Plated Stem Will Help Prevent Early Hour Exhaust Valve Sticking{1104,1105}
1998/05/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New Specification For Reusability of the Intake Valve and the Exhaust Valve {1105}
2002/05/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Later Pre-Chamber Cylinder Heads On Early 3304 Engines Without Drilled Rocker Stands Are Used {1100}
2012/10/15
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Valves
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Head
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Valve Cover (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Cover (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Head Assembly & Spacer Plate
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valves
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Guides
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Water Directors
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Head Assembly And Spacer Plate
3304B & 3306B MARINE ENGINES
Valves
3304B & 3306B MARINE ENGINES
Valve Guides
3304B & 3306B MARINE ENGINES
Valve Seat Inserts
3304B & 3306B MARINE ENGINES
Water Directors
3304B & 3306B MARINE ENGINES
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control{1109}
1983/09/26
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
New Cylinder Head Gasket Used{1124,1100,1101}
1992/02/17
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
New Valve Guide Available{1104}
1995/12/25
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Later Pre-Chamber Cylinder Heads On Early 3304 Engines Without Drilled Rocker Stands Are Used {1100}
2012/10/11

Caterpillar Parts SIS Catalog 3304 :

CYLINDER HEAD GP
7N-6544 CYLINDER HEAD GP
CYLINDER HEAD GP
1N-4304 CYLINDER HEAD GP
CYLINDER BLOCK GP
7N-6553 CYLINDER BLOCK GP
CYLINDER BLOCK GP
1N-3574 CYLINDER BLOCK GP
CYLINDER BLOCK AS
7N-6552 CYLINDER BLOCK AS
CRANKSHAFT GP
6N-8080 CRANKSHAFT GP
CRANKSHAFT GP
6N-8080 CRANKSHAFT GP
CRANKSHAFT AS
4N-7695 CRANKSHAFT AS
DRIVE GP-AUXILIARY
138-2780 DRIVE GP-AUXILIARY
DRIVE GP-AUXILIARY
1W-6298 DRIVE GP-AUXILIARY
DRIVE GP-FAN
3N-6987 DRIVE GP-FAN
DRIVE GP-FAN
3N-7019 DRIVE GP-FAN
DRIVE GP-FAN
3N-7210 DRIVE GP-FAN
DRIVE GP-FAN
3N-7397 DRIVE GP-FAN
DRIVE GP-FAN
3N-7397 DRIVE GP-FAN
DRIVE GP-FAN
5N-4555 DRIVE GP-FAN

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.