2W-0262 CAMSHAFT AS 21 DEGREES-GOVERNOR PART OF 2W-0263 PUMP GP-FUEL INJECTION 3304 ENGINE - MACHINE



FUEL SYSTEM
PUMP GP-FUEL INJECTION
CONTROL GP-FUEL RATIO

ENGINE - MACHINE 3304 ENGINE - MACHINE 10E
 3304 Industrial Engine 10E00300-UP SEBP1400 3304 10E   (2018)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
CAMSHAFT AS
2W-0262 CAMSHAFT AS
CAMSHAFT AS
2W-6175 CAMSHAFT AS
FASTENER GP-FUEL INJ PUMP
7C-8995 FASTENER GP-FUEL INJ PUMP
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
 

#SEBP14000410
 

2W-0262: CAMSHAFT AS

2W-0262 CAMSHAFT AS
21 DEGREES-GOVERNOR
PART OF 2W-0263 PUMP GP-FUEL INJECTION
i00145977 SEBP1400
2W0262 CAMSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
2. 7N-7264 [4] WEIGHT-GOVERNOR  
3. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
4. 1S-5440 [4] DOWEL  
5. 4N-9019 [1] DOWEL  
6. 8N-2511 [1] CARRIER-WEIGHT  
7. 7N-7166 [2] RACE-THRUST BEARING  
8. 7L-3326 [1] BEARING-THRUST  
9. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
 

#SEBP14000411
 

2W-6175: CAMSHAFT AS

2W-6175 CAMSHAFT AS
S/N 10E587-UP
27 DEGREES
PART OF 2W-6178 PUMP GP-FUEL INJECTION
i00359722 SEBP1400
2W6175 CAMSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
2. 7N-7264 [4] WEIGHT-GOVERNOR  
3. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
4. 1S-5440 [4] DOWEL  
5. 4N-9019 [1] DOWEL  
6. 8N-2511 [1] CARRIER-WEIGHT  
7. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
8. 7N-7166 [2] RACE-THRUST BEARING  
9. 7L-3326 [1] BEARING-THRUST  
 

#SEBP14000412
 

1W-3570: CONTROL GP-FUEL RATIO

1W-3570 CONTROL GP-FUEL RATIO
PART OF 2W-8068 CONTROL GP-FUEL RATIO
AN ATTACHMENT
i00193572 SEBP1400
1W3570 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 8F-6302 [2] BOLT (1/4-20X3.75-IN)  
  5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
2. 2D-6392 [1] SEAL-O-RING  
3. 8N-6680 [1] SCREEN AS (FUEL)  
4. 7N-8622 Y [1] CONTROL GP-FUEL RATIO  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000413
 

2W-8068: CONTROL GP-FUEL RATIO

2W-8068 CONTROL GP-FUEL RATIO
Type 1
CANNOT BE USED WITH WOODWARD GOVERNOR
AN ATTACHMENT
i00360669 SEBP1400
2W8068 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 1W-3570 Y [1] CONTROL GP-FUEL RATIO  
2. 2W-8067 [1] TUBE AS  
3. 7M-8322 B [1] CLIP  
4. 1B-3581 [1] CLIP  
5. 2N-1287 [1] ELBOW-FLARED  
6. 3J-7352 [1] CONNECTOR  
7. 3J-7354 [1] SEAL-O-RING  
8. 0S-0509 B [1] BOLT (3/8-16X0.75-IN)  
9. 5M-2894 B [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000414
 

2W-8068: CONTROL GP-FUEL RATIO

2W-8068 CONTROL GP-FUEL RATIO
Type 2
CANNOT BE USED WITH WOODWARD GOVERNOR
AN ATTACHMENT
i00360674 SEBP1400
2W8068 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 4W-1339 CY [1] CONTROL GP-FUEL RATIO  
2. 2W-8067 [1] TUBE AS  
3. 8J-8343 C [1] SEAL-O-RING  
4. 2B-2404 C [1] CLIP  
5. 6K-1972 C [1] ELBOW-FLARED  
6. 3J-7352 [1] CONNECTOR  
7. 3J-7354 [1] SEAL-O-RING  
8. 2H-3755 C [1] BOLT (5/16-18X0.43-IN)  
9. 9M-1974 C [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 5P-6620 C [1] SEAL-O-RING  
11. 8M-8515 C [1] SEAL-O-RING  
12. 033-5879 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000415
 

4W-1037: CONTROL GP-FUEL RATIO

4W-1037 CONTROL GP-FUEL RATIO
PART OF 4W-1339 CONTROL GP-FUEL RATIO
AN ATTACHMENT
i00193684 SEBP1400
4W1037 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 1B-4201 [1] NUT-FULL (1/4-28-THD)  
2. 2W-9315 [2] WASHER-SPRING  
3. 7N-9215 [1] STOP-ADJUSTMENT  
4. 3S-4701 [1] NUT  
5. 7N-9160 [1] SPRING  
6. 7N-8502 [1] COVER  
7. 7N-9216 [1] WASHER  
8. 7N-9062 [1] HOUSING  
9. 8N-5763 [1] SEAL  
10. 8N-5764 [1] PISTON  
11. 8F-4610 [1] RING-RETAINING  
12. 2A-5546 [2] BOLT (1/4-20X1.375-IN)  
13. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 5P-6945 [2] BOLT (1/4-20X1.125-IN)  
15. 1W-2076 [1] COVER  
16. 2W-9316 [1] VALVE AS (FUEL CONTROL)  
17. 7N-9036 [1] VALVE (FUEL CONTROL)  
18. 8N-5765 [1] SPRING  
19. 7N-9035 [1] RETAINER  
20. 7N-8316 [1] EXTENSION-VALVE  
21. 4W-1038 [1] SPRING  
22. 9N-1754 [1] SPRING  
23. 4W-1034 [1] DIAPHRAGM  
24. 7J-0204 [1] SEAL-O-RING  
25. 7N-9033 [1] GASKET  
26. 4W-0924 [1] RETAINER  
 

#SEBP14000416
 

4W-1339: CONTROL GP-FUEL RATIO

4W-1339 CONTROL GP-FUEL RATIO
PART OF 2W-8068 CONTROL GP-FUEL RATIO
Type 1
AN ATTACHMENT
i00193685 SEBP1400
4W1339 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
2. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 4W-1037 Y [1] CONTROL GP-FUEL RATIO  
4. 2D-6392 [1] SEAL-O-RING  
5. 8N-6680 [1] SCREEN AS (FUEL)(GOVERNOR HOUSING)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000417
 

4W-1339: CONTROL GP-FUEL RATIO

4W-1339 CONTROL GP-FUEL RATIO
PART OF 2W-8068 CONTROL GP-FUEL RATIO
Type 2
AN ATTACHMENT
i00122117 SEBP1400
4W1339 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
2. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 7W-2830 CY [1] CONTROL GP-FUEL RATIO  
4. 2D-6392 [1] SEAL-O-RING  
5. 8N-6680 [1] SCREEN AS (FUEL)(GOVERNOR HOUSING)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000418
 

7N-8622: CONTROL GP-FUEL RATIO

7N-8622 CONTROL GP-FUEL RATIO
PART OF 1W-3570 CONTROL GP-FUEL RATIO
AN ATTACHMENT
i00193788 SEBP1400
7N8622 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 1B-4201 [1] NUT-FULL (1/4-28-THD)  
2. 6S-6412 [1] SPACER (6.756X19.05X2.5-MM THK)  
3. 7N-9215 [1] STOP-ADJUSTMENT  
4. 3S-4701 [1] NUT  
5. 7N-9160 [1] SPRING  
6. 7N-8502 [1] COVER  
7. 7N-9216 [1] WASHER  
8. 7N-9062 [1] HOUSING  
9. 8N-5763 [1] SEAL  
10. 8N-5764 [1] PISTON  
11. 7N-9736 [1] RING  
12. 2A-5546 [2] BOLT (1/4-20X1.375-IN)  
13. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 9F-6580 [2] BOLT (1/4-20X1.125-IN)  
15. 1W-2076 [1] COVER  
16. 7N-9038 [1] VALVE AS (FUEL CONTROL)  
17. 7N-9036 [1] VALVE (FUEL CONTROL)  
18. 8N-5765 [1] SPRING  
19. 7N-9035 [1] RETAINER  
20. 7N-8316 [1] EXTENSION-VALVE  
21. 7N-9159 [1] SPRING  
22. 9N-1754 [1] SPRING  
23. 8N-9674 [1] DIAPHRAGM  
24. 7J-0204 [1] SEAL-O-RING  
25. 7N-9033 [1] GASKET  
26. 7N-8500 [1] RETAINER  
 

#SEBP14000419
 

7W-2830: CONTROL GP-FUEL RATIO

7W-2830 CONTROL GP-FUEL RATIO
PART OF 4W-1339 CONTROL GP-FUEL RATIO
AN ATTACHMENT
i00122403 SEBP1400
7W2830 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 9S-8748 [1] NUT-FULL (1/4-28-THD)  
2. 2W-9315 [2] WASHER-SPRING  
3. 4W-0924 [1] RETAINER  
4. 5P-8210 [1] SEAL-O-RING  
5. 7W-2826 [1] SPRING  
6. 4P-7275 [1] COVER  
7. 106-6493 [1] WASHER  
8. 7N-9062 [1] HOUSING  
9. 8N-5763 [1] SEAL  
10. 8N-5764 [1] PISTON  
11. 8F-4610 [1] RING-RETAINING  
12. 2A-5546 [2] BOLT (1/4-20X1.375-IN)  
13. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 5P-6945 [2] BOLT (1/4-20X1.125-IN)  
15. 4P-7274 [1] COVER  
16. 2W-9316 [1] VALVE AS (FUEL CONTROL)  
17. 7N-9036 [1] VALVE (FUEL CONTROL)  
18. 8N-5765 [1] SPRING  
19. 7N-9035 [1] RETAINER  
20. 7W-2015 [1] EXTENSION-VALVE  
21. 7W-2827 [1] SPRING  
22. 9N-1754 [1] SPRING  
23. 6I-1564 [1] DIAPHRAGM  
24. 3E-6760 [1] SEAL-O-RING  
25. 115-3358 [1] WASHER (12.7X6.65X0.79-MM THK)  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
New Fuel Injection Nozzle Assembly Used
1980/01/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Explanation Of Differences In Timing Advance Information
1981/08/26
New Torque Specification For Fuel Injection Pump Bushing
1982/09/22
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Installation Procedure For Woodward 3161 and UG8 Governors
1983/07/06
Service Information For Woodward Governors
1983/10/26
Fuel System Manual Bleed Valve Removed
1984/02/22
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Fuel Transfer Pump Improved
1985/11/01
Bolt Removed From Governor And Fuel Injection Pump Group
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Governor Control Motor Polarity May Require A Change
1990/11/01
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly
1991/04/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Manufacturing And Design Improvements Incorporated Into Fuel Injection Nozzle Assemblies{1252,1307}
1997/07/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Cat® Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Engines {1251, 1278}
2014/09/05
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines<BR>
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Control
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Nozzles
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing &amp; Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assembly &amp; Push Rods
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3304B & 3306B MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304B & 3306B MARINE ENGINES
Governor
3304B & 3306B MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly And Push Rods
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly
3304B & 3306B MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Installation Procedure For Woodward 3161 and UG8 Governors{1264}
1983/05/30
New Fuel Ratio Control Group Has Improved Diaphragm{1278,1257,1251}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel System Manual Bleed Valve Removed; Drain Lines Group Added{1251,1253,1286}
1984/02/13
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Higher Torque Can Be Used With 6V6980 Nozzle Puller Group{0706,1254}
1985/06/10
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}
1988/12/19
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/04/15
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Improved Fuel Injection Line Assemblies And Clamps Used{1252}
1992/11/09
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 3304 :

BOX AS-GOVERNOR PREREGULATOR
4W-5391 BOX AS-GOVERNOR PREREGULATOR
ADAPTER GP-PRIMING PUMP
9N-2722 ADAPTER GP-PRIMING PUMP
TURBOCHARGER GP
9Y-6184 TURBOCHARGER GP
TURBOCHARGER GP
7N-4651 TURBOCHARGER GP
TURBOCHARGER GP
7N-4650 TURBOCHARGER GP
TURBOCHARGER GP
2W-8139 TURBOCHARGER GP
TURBOCHARGER GP
2W-1953 TURBOCHARGER GP
TURBOCHARGER GP
2W-1953 TURBOCHARGER GP
CAMSHAFT AS
2W-6175 CAMSHAFT AS
CONTROL GP-FUEL RATIO
1W-3570 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
2W-8068 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
2W-8068 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
4W-1037 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
4W-1339 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
4W-1339 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
7N-8622 CONTROL GP-FUEL RATIO

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY