8N-8170 LINES GP-FUEL INJECTION S/N 10E1487-3751 PART OF 2W-6237, 8N-2772 LINES GP-FUEL INJECTION ALSO AN ATTACHMENT 3304



FUEL SYSTEM
LINES GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION

ENGINE - MACHINE 3304 ENGINE - MACHINE 10E
 3304 Industrial Engine 10E00300-UP SEBP1400 3304 10E   (2018)

FUEL SYSTEM

LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8170 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8170 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8170 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8170 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8174 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8174 LINES GP-FUEL INJECTION
 

#SEBP14000480
 

8N-8170: LINES GP-FUEL INJECTION

8N-8170 LINES GP-FUEL INJECTION
S/N 10E1487-3751
PART OF 2W-6237, 8N-2772 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00146149 SEBP1400
8N8170 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 8N-5132 [4] CLAMP-NOZZLE  
2. 1T-0416 [4] BOLT (5/16-18X0.75-IN)  
3. 8N-7005 [4] INJECTOR GP-FUEL  
    (EACH INCLUDES)
4. 2W-1230 [1] SCREW-BUTTON HEAD  
5. 8T-0659 [1] WASHER  
6. 7W-4486 [1] WASHER (9.76X17.14X1.8-MM THK)  
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 7C-5170 CY [1] LINES GP-FUEL INJECTION  
9. 0T-0065 [1] BOLT (3/8-16X3.5-IN)  
10. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
12. 7C-5160 CY [1] LINES GP-FUEL INJECTION  
13. 8H-9204 C [4] WASHER-FELT (19/32X7/8X5/16-IN THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000481
 

8N-8170: LINES GP-FUEL INJECTION

8N-8170 LINES GP-FUEL INJECTION
S/N 10E3752-UP
PART OF 2W-6237, 8N-2772 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00146150 SEBP1400
8N8170 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 8N-5132 [4] CLAMP-NOZZLE  
2. 1T-0416 [4] BOLT (5/16-18X0.75-IN)  
3. 8N-7005 [4] INJECTOR GP-FUEL  
    (EACH INCLUDES)
4. 2W-1230 [1] SCREW-BUTTON HEAD  
5. 8T-0659 [1] WASHER  
6. 7W-4486 [1] WASHER (9.76X17.14X1.8-MM THK)  
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 4P-9960 CY [1] LINES GP-FUEL INJECTION  
9. 0T-0065 [1] BOLT (3/8-16X3.5-IN)  
10. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
12. 4P-9950 CY [1] LINES GP-FUEL INJECTION  
13. 8H-9204 [4] WASHER-FELT (19/32X7/8X5/16-IN THK)  
14. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000482
 

8N-8174: LINES GP-FUEL INJECTION

8N-8174 LINES GP-FUEL INJECTION
PART OF 1W-8488 MANIFOLD GP-EXHAUST
Type 1
AN ATTACHMENT
i00414926 SEBP1400
8N8174 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 2W-8309 Y [1] LINES GP-FUEL INJECTION  
2. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1594 [2] BOLT (3/8-16X1-IN)  
5. 8N-5132 [4] CLAMP-NOZZLE  
6. 1T-0416 [4] BOLT (5/16-18X0.75-IN)  
7. 8H-9204 [4] WASHER-FELT (19/32X7/8X5/16-IN THK)  
8. 8N-7005 [4] INJECTOR GP-FUEL  
    (EACH INCLUDES)
9. 9L-9098 [1] SEAL-CARBON STOP  
10. 1W-7461 [1] WASHER  
11. 2W-1230 [1] SCREW-BUTTON HEAD  
12. 1W-8616 [1] WASHER  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000483
 

8N-8174: LINES GP-FUEL INJECTION

8N-8174 LINES GP-FUEL INJECTION
PART OF 1W-8488 MANIFOLD GP-EXHAUST
Type 2
AN ATTACHMENT
i00414930 SEBP1400
8N8174 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 7W-9690 CY [1] LINES GP-FUEL INJECTION  
2. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1594 [2] BOLT (3/8-16X1-IN)  
5. 8N-5132 [4] CLAMP-NOZZLE  
6. 1T-0416 [4] BOLT (5/16-18X0.75-IN)  
7. 8H-9204 [4] WASHER-FELT (19/32X7/8X5/16-IN THK)  
8. 8N-7005 [4] INJECTOR GP-FUEL  
    (EACH INCLUDES)
9. 9L-9098 [1] SEAL-CARBON STOP  
10. 1W-7461 [1] WASHER  
11. 2W-1230 [1] SCREW-BUTTON HEAD  
12. 1W-8616 [1] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000484
 

8N-8174: LINES GP-FUEL INJECTION

8N-8174 LINES GP-FUEL INJECTION
PART OF 1W-8488 MANIFOLD GP-EXHAUST
Type 3
AN ATTACHMENT
i00414936 SEBP1400
8N8174 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 7C-8876 CY [1] LINES GP-FUEL INJECTION  
2. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1594 [2] BOLT (3/8-16X1-IN)  
5. 8N-5132 [4] CLAMP-NOZZLE  
6. 1T-0416 [4] BOLT (5/16-18X0.75-IN)  
7. 8H-9204 [4] WASHER-FELT (19/32X7/8X5/16-IN THK)  
8. 8N-7005 [4] INJECTOR GP-FUEL  
    (EACH INCLUDES)
9. 9L-9098 [1] SEAL-CARBON STOP  
10. 1W-7461 [1] WASHER  
11. 2W-1230 [1] SCREW-BUTTON HEAD  
12. 1W-8616 [1] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000485
 

2W-4160: PUMP & MTG GP-FUEL TRANSFER

2W-4160 PUMP & MTG GP-FUEL TRANSFER
i00122041 SEBP1400
2W4160 PUMP & MTG GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 4F-7957 [1] BOLT (1/4-20X0.875-IN)  
2. 1W-1695 Y [1] PUMP GP-FUEL TRANSFER  
3. 4B-9365 [1] BOLT (1/4-20X3-IN)  
4. 4J-8997 C [1] SEAL-O-RING  
5. 5P-0537 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000486
 

1W-6539: PUMP GP-FUEL INJECTION

1W-6539 PUMP GP-FUEL INJECTION
PART OF 2W-0263, 2W-6178 PUMP GP-FUEL INJECTION
Type 1
i00144994 SEBP1400
1W6539 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 1M-3506 [1] RING-RETAINING  
2. 8N-1415 [1] SPRING-CHECK  
3. 8N-2516 [1] BONNET-VALVE  
4. 8N-1414 [1] CHECK AS-PUMP  
5. 1W-6541 [1] PLUNGER AS  
6. 7N-1067 [1] SPRING-LIFTER  
7. 7N-1415 [1] WASHER-RETAINING  
8. 8H-9299 [1] SCREW-PLUNGER GEAR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP14000487
 

1W-6539: PUMP GP-FUEL INJECTION

1W-6539 PUMP GP-FUEL INJECTION
PART OF 2W-0263, 2W-6178 PUMP GP-FUEL INJECTION
Type 2
i00121989 SEBP1400
1W6539 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 7W-1927 [1] RING-RETAINING  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-9171 [1] BONNET-VALVE  
4. 1W-6987 [1] VALVE AS-CHECK (FUEL)  
5. 1W-6541 [1] PLUNGER AS  
6. 7N-1067 [1] SPRING-LIFTER  
7. 7W-2808 [1] WASHER-RETAINING  
8. 7C-5278 C [1] BOLT-PLUNGER GEAR (FUEL PUMP)(12.1MM LG)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP14000488
 

2W-0263: PUMP GP-FUEL INJECTION

2W-0263 PUMP GP-FUEL INJECTION
PART OF 2W-1736 PUMP GP-GOV & FUEL INJ
Type 1
i00145978 SEBP1400
2W0263 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3485 [1] RACK-REGULATOR  
3. 1W-3486 [1] HOUSING GP-FUEL PUMP  
4. 1S-1953 [1] BEARING-RACK  
5. 1W-3285 [1] BEARING-RACK  
6. 4P-8480 [4] PIN-PUMP GUIDE  
7. 7N-7970 [1] BUSHING  
8. 7N-7969 [4] DOWEL  
9. 8N-2518 [1] BUSHING  
10. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
11. 1W-6539 Y [4] PUMP GP-FUEL INJECTION  
12. 8N-5117 [4] BUSHING-TERMINAL  
13. 7E-4846 [4] SEAL-O-RING  
14. 4W-6869 [4] SPACER (27X32.54X5.049-MM THK)  
15. 2W-0262 Y [1] CAMSHAFT AS  
16. 7N-8421 C [1] RING-RETAINING  
17. 8N-2487 [1] WASHER-THRUST  
18. 8N-2489 [4] LIFTER AS  
19. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000489
 

2W-0263: PUMP GP-FUEL INJECTION

2W-0263 PUMP GP-FUEL INJECTION
PART OF 2W-1736 PUMP GP-GOV & FUEL INJ
Type 2
i00145979 SEBP1400
2W0263 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3485 [1] RACK-REGULATOR  
3. 1W-3486 [1] HOUSING GP-FUEL PUMP  
4. 1S-1953 [1] BEARING-RACK  
5. 1W-3285 [1] BEARING-RACK  
6. 4P-8480 [4] PIN-PUMP GUIDE  
7. 6I-0979 [4] DOWEL  
8. 8N-2518 [1] BUSHING  
9. 7N-7970 [1] BUSHING  
10. 7N-1047 [1] COVER-TIMING  
  150-3724 [1] GASKET  
11. 1W-6539 Y [4] PUMP GP-FUEL INJECTION  
12. 8N-5117 [4] BUSHING-TERMINAL  
13. 114-8718 [4] SEAL-O-RING  
14. 4W-6869 [4] SPACER (27X32.54X5.049-MM THK)  
15. 4P-9022 [1] CAMSHAFT AS  
16. 7N-7264 [4] WEIGHT-GOVERNOR  
17. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
18. 1S-5440 [4] DOWEL  
19. 4N-9019 [1] DOWEL  
20. 7E-3986 [1] CARRIER-WEIGHT  
21. 7L-3326 [1] BEARING-THRUST  
22. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
23. 7N-7166 [2] RACE-THRUST BEARING  
24. 7N-8421 [1] RING-RETAINING  
25. 8N-2487 [1] WASHER-THRUST  
26. 4P-9832 [4] LIFTER AS  
27. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/01
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Specifications
Fuel Injection Nozzle
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines<BR>
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Lines
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
3304B & 3306B MARINE ENGINES
Fuel Injection Nozzles
3304B & 3306B MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Higher Torque Can Be Used With 6V6980 Nozzle Puller Group{0706,1254}
1985/06/10
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Improved Fuel Injection Line Assemblies And Clamps Used{1252}
1992/11/09
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01

Caterpillar Parts SIS Catalog 3304 :

LINES GP-FUEL INJECTION
8N-8170 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8170 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-2772 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7W-9690 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7W-6657 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7W-3795 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7W-3790 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-8876 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8170 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8174 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8174 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8174 LINES GP-FUEL INJECTION
PUMP & MTG GP-FUEL TRANSFER
2W-4160 PUMP & MTG GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0263 PUMP GP-FUEL INJECTION

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY