AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W-6178 PUMP GP-FUEL INJECTION S/N 10E587-UP PART OF 2W-4111 PUMP GP-GOV & FUEL INJ Type 1 3304 ENGINE - MACHINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING

ENGINE - MACHINE 3304 ENGINE - MACHINE 10E
 3304 Industrial Engine 10E00300-UP SEBP1400 3304 10E   (2018)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0263 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0263 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-6178 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-6178 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
2W-1736 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-1736 PUMP GP-GOV & FUEL INJ
 

#SEBP14000490
 

2W-6178: PUMP GP-FUEL INJECTION

2W-6178 PUMP GP-FUEL INJECTION
S/N 10E587-UP
PART OF 2W-4111 PUMP GP-GOV & FUEL INJ
Type 1
i00359728 SEBP1400
2W6178 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3485 [1] RACK-REGULATOR  
3. 1W-3486 [1] HOUSING GP-FUEL PUMP  
4. 1S-1953 [1] BEARING-RACK  
5. 1W-3285 [1] BEARING-RACK  
6. 4P-8480 [4] PIN-PUMP GUIDE  
7. 7N-7969 [4] DOWEL  
8. 8N-2518 [1] BUSHING  
9. 7N-7970 [1] BUSHING  
10. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
11. 1W-6539 Y [4] PUMP GP-FUEL INJECTION  
12. 8N-5117 [4] BUSHING-TERMINAL  
13. 7E-4846 [4] SEAL-O-RING  
14. 4W-6869 [4] SPACER (27X32.54X5.049-MM THK)  
15. 2W-6175 Y [1] CAMSHAFT AS  
16. 7N-8421 [1] RING-RETAINING  
17. 8N-2487 [1] WASHER-THRUST  
18. 8N-2489 [4] LIFTER AS  
19. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000491
 

2W-6178: PUMP GP-FUEL INJECTION

2W-6178 PUMP GP-FUEL INJECTION
S/N 10E587-UP
PART OF 2W-4111 PUMP GP-GOV & FUEL INJ
Type 2
i00359729 SEBP1400
2W6178 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3485 [1] RACK-REGULATOR  
3. 1W-3486 [1] HOUSING GP-FUEL PUMP  
4. 1S-1953 [1] BEARING-RACK  
5. 1W-3285 [1] BEARING-RACK  
6. 4P-8480 [4] PIN-PUMP GUIDE  
7. 6I-0979 C [4] DOWEL  
8. 8N-2518 [1] BUSHING  
9. 7N-7970 [1] BUSHING  
10. 7N-1047 [1] COVER-TIMING  
  150-3724 [1] GASKET  
11. 1W-6539 Y [4] PUMP GP-FUEL INJECTION  
12. 8N-5117 [4] BUSHING-TERMINAL  
13. 114-8718 [4] SEAL-O-RING  
14. 4W-6869 [4] SPACER (27X32.54X5.049-MM THK)  
15. 4P-9023 C [1] CAMSHAFT AS  
16. 7N-7264 C [4] WEIGHT-GOVERNOR  
17. 9Y-7037 C [4] BOLT (1/4-20X1.25-IN)  
18. 1S-5440 C [4] DOWEL  
19. 4N-9019 C [1] DOWEL  
20. 7E-3986 C [1] CARRIER-WEIGHT  
21. 7L-3326 C [1] BEARING-THRUST  
22. 8N-2510 C [1] SHAFT-WEIGHT CARRIER  
23. 7N-7166 C [2] RACE-THRUST BEARING  
24. 7N-8421 [1] RING-RETAINING  
25. 8N-2487 [1] WASHER-THRUST  
26. 4P-9832 C [4] LIFTER AS  
27. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000492
 

148-2113: PUMP GP-FUEL PRIMING

148-2113 PUMP GP-FUEL PRIMING
HORIZONTAL
AN ATTACHMENT
i00820056 SEBP1400
1482113 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-6201 Y [1] PUMP GP-FUEL PRM & PRIM FILTER  
2. 7W-3658 [1] BRACKET AS  
  4D-6293 [3] BOSS (3/8-16X1.31-IN)  
  6S-7982 [1] SPACER  
  7W-3657 [1] BRACKET  
3. 1A-8537 [1] BOLT (5/8-11X2.75-IN)  
4. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
5. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
6. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 7N-2597 [2] SPACER (13.5X25.4X8.08-MM THK)  
8. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14000493
 

2W-6841: PUMP GP-FUEL PRIMING

2W-6841 PUMP GP-FUEL PRIMING
S/N 10E300-799
i00360037 SEBP1400
2W6841 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4999 [1] PUMP AS-FUEL PRIMING  
2. 1D-4533 [1] BOLT (1/4-20X2.25-IN)  
  1B-4330 [1] NUT (1/4-20-THD)  
  5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 1D-4538 [1] BOLT (5/16-18X2.25-IN)  
  1D-4716 [1] NUT-FULL (5/16-18-THD)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
4. 032-1268 [1] CONNECTOR (90-DEG)  
5. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
6. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 1W-9283 [1] BRACKET AS  
8. 7N-2597 C [2] SPACER (13.5X25.4X8.08-MM THK)  
9. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
10. 7B-1115 [1] BOLT (5/8-11X1.625-IN)  
  5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
11. 2W-1809 [1] BRACKET AS-PUMP  
12. 5R-3564 [1] BLOCK  
13. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14000494
 

4W-1875: PUMP GP-FUEL PRIMING

4W-1875 PUMP GP-FUEL PRIMING
S/N 10E300-1759
i00378270 SEBP1400
4W1875 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4999 [1] PUMP AS-FUEL PRIMING  
2. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
4. 5R-3895 [2] SPACER (10.5X25.4X0.4-MM THK)  
5. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
6. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 1W-9283 [1] BRACKET AS  
8. 4D-6293 [1] BOSS (3/8-16X1.31-IN)  
9. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
10. 7B-1115 [1] BOLT (5/8-11X1.625-IN)  
  5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
11. 1J-9671 [2] SEAL-O-RING  
12. 2W-7089 [1] BASE-FUEL PRIMING PUMP  
13. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
14. 9S-8003 [2] PLUG (1/2-20-THD)  
 

#SEBP14000495
 

4W-1875: PUMP GP-FUEL PRIMING

4W-1875 PUMP GP-FUEL PRIMING
S/N 10E1760-UP
i00378271 SEBP1400
4W1875 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3658 C [1] BRACKET AS  
2. 7W-8834 C [1] BASE-FUEL PRIMING PUMP  
3. 105-2508 C [1] PUMP AS-FUEL PRIMING  
4. 7N-2597 C [2] SPACER (13.5X25.4X8.08-MM THK)  
5. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
6. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
8. 9M-1974 C [2] WASHER-HARD (8.8X16X2-MM THK)  
9. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
10. 5P-0537 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
11. 1A-8537 C [1] BOLT (5/8-11X2.75-IN)  
12. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
13. 8N-3573 C [1] COVER  
14. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
15. 1P-0436 C [2] GASKET (FUEL PRIMING PUMP)  
16. 4F-7957 C [1] BOLT (1/4-20X0.875-IN)  
17. 0S-1618 C [1] BOLT (5/16-18X1-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14000496
 

4W-9838: PUMP GP-FUEL PRIMING

4W-9838 PUMP GP-FUEL PRIMING
Type 1
AN ATTACHMENT
i00380777 SEBP1400
4W9838 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4999 [1] PUMP AS-FUEL PRIMING  
2. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 1D-4717 [4] NUT (3/8-16-THD)  
5. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
6. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
8. 9S-8003 [2] PLUG (1/2-20-THD)  
9. 1J-9671 [2] SEAL-O-RING  
10. 2W-7089 [1] BASE-FUEL PRIMING PUMP  
11. 030-7947 [1] ADAPTER-ELBOW  
  3J-1907 [1] SEAL-O-RING  
12. 5P-1404 [1] ADAPTER  
  2M-9780 [1] SEAL-O-RING  
13. 4W-1242 [1] BRACKET AS  
14. 0L-1143 [2] BOLT (3/8-16X2.5-IN)  
 

#SEBP14000497
 

4W-9838: PUMP GP-FUEL PRIMING

4W-9838 PUMP GP-FUEL PRIMING
Type 2
AN ATTACHMENT
i00380778 SEBP1400
4W9838 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-0788 C [1] PUMP AS-FUEL PRIMING  
2. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 1D-4717 [4] NUT (3/8-16-THD)  
5. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
6. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
8. 9S-8003 [2] PLUG (1/2-20-THD)  
9. 1J-9671 [2] SEAL-O-RING  
10. 2W-7089 [1] BASE-FUEL PRIMING PUMP  
11. 030-7947 [1] ADAPTER-ELBOW  
  3J-1907 [1] SEAL-O-RING  
12. 5P-1404 [1] ADAPTER  
  2M-9780 [1] SEAL-O-RING  
13. 4W-1242 [1] BRACKET AS  
14. 0L-1143 [2] BOLT (3/8-16X2.5-IN)  
15. 005-4362 C [1] ELBOW  
  3K-0360 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14000498
 

4W-9838: PUMP GP-FUEL PRIMING

4W-9838 PUMP GP-FUEL PRIMING
Type 3
AN ATTACHMENT
i00380779 SEBP1400
4W9838 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-2508 [1] PUMP AS-FUEL PRIMING  
2. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
3. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
4. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
5. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
6. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 1P-0436 C [2] GASKET (FUEL PRIMING PUMP)  
8. 8N-3573 C [1] COVER  
9. 4F-7957 C [1] BOLT (1/4-20X0.875-IN)  
10. 0S-1618 C [1] BOLT (5/16-18X1-IN)  
11. 030-7947 [1] ADAPTER-ELBOW  
  3J-1907 [1] SEAL-O-RING  
12. 5P-1404 [1] ADAPTER  
  2M-9780 [1] SEAL-O-RING  
13. 4W-1242 [1] BRACKET AS  
14. 0L-1143 [2] BOLT (3/8-16X2.5-IN)  
15. 005-4362 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
16. 7W-8834 C [1] BASE-FUEL PRIMING PUMP  
17. 9M-1974 C [2] WASHER-HARD (8.8X16X2-MM THK)  
18. 5P-0537 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14000499
 

8N-3365: PUMP GP-FUEL PRIMING

8N-3365 PUMP GP-FUEL PRIMING
S/N 10E4554-UP
PART OF 8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
ALSO AN ATTACHMENT
i00157299 SEBP1400
8N3365 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3304 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6350 [1] BASE AS-FUEL FILTER  
1A. 8N-0803 [1] BASE-FILTER  
1B. 7E-5346 [1] VALVE AS (FUEL CHECK)  
1C. 9S-8003 [2] PLUG (1/2-20-THD)  
1D. 1J-9671 [2] SEAL-O-RING  
2. 105-2508 [1] PUMP AS-FUEL PRIMING  
3. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
New Fuel Injection Nozzle Assembly Used
1980/01/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Explanation Of Differences In Timing Advance Information
1981/08/26
New Torque Specification For Fuel Injection Pump Bushing
1982/09/22
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Installation Procedure For Woodward 3161 and UG8 Governors
1983/07/06
Service Information For Woodward Governors
1983/10/26
Fuel System Manual Bleed Valve Removed
1984/02/22
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Fuel Transfer Pump Improved
1985/11/01
Bolt Removed From Governor And Fuel Injection Pump Group
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Governor Control Motor Polarity May Require A Change
1990/11/01
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly
1991/04/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Manufacturing And Design Improvements Incorporated Into Fuel Injection Nozzle Assemblies{1252,1307}
1997/07/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Cat® Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Engines {1251, 1278}
2014/09/05
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines<BR>
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Control
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Nozzles
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing &amp; Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assembly &amp; Push Rods
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3304B & 3306B MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304B & 3306B MARINE ENGINES
Governor
3304B & 3306B MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly And Push Rods
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly
3304B & 3306B MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Installation Procedure For Woodward 3161 and UG8 Governors{1264}
1983/05/30
New Fuel Ratio Control Group Has Improved Diaphragm{1278,1257,1251}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel System Manual Bleed Valve Removed; Drain Lines Group Added{1251,1253,1286}
1984/02/13
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Higher Torque Can Be Used With 6V6980 Nozzle Puller Group{0706,1254}
1985/06/10
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}
1988/12/19
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/04/15
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Improved Fuel Injection Line Assemblies And Clamps Used{1252}
1992/11/09
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 3304 :

PUMP GP-FUEL INJECTION
2W-0263 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0263 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP & MTG GP-FUEL TRANSFER
2W-4160 PUMP & MTG GP-FUEL TRANSFER
LINES GP-FUEL INJECTION
8N-8174 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8174 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-8174 LINES GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-6178 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
148-2113 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
2W-6841 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4W-1875 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4W-1875 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4W-9838 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4W-9838 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4W-9838 PUMP GP-FUEL PRIMING

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.