AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3516 MARINE ENGINE 29Z00001-00817 AIR INLET AND EXHAUST SYSTEM Caterpillar SIS



MARINE ENGINE 3516 MARINE ENGINE 29Z
 3516 MARINE ENGINE 29Z00001-00817 SEBP1401 3516 29Z   (1982)

Parts group 3516:

  For full view, you need register
AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP
LINES GP-AUXILIARY SEA WATER
8N-8469 LINES GP-AUXILIARY SEA WATER
8N8469 WATER LINES GROUP-SEA WATER
FOR USE WITH 8N8466 AUXILIARY PUMP-PAGE 94
AN ATTACHMENT
LINES GP-AUXILIARY SEA WATER
5N-5913 LINES GP-AUXILIARY SEA WATER
5N5913 AUXILIARY LINES GROUP-SEA WATER
FOR USE WITH 5N5874 AUXILIARY PUMP GROUP SHOWN ON PAGE 98. AN ATTACHMENT
LINES GP-AUXILIARY SEA WATER
7W-6310 LINES GP-AUXILIARY SEA WATER
7W6310 LINES GROUP-AUXILIARY-SEA WATER
AN ATTACHMENT
LINES GP-AUXILIARY SEA WATER
7W-6315 LINES GP-AUXILIARY SEA WATER
7W6315 LINES GROUP-AUXILIARY-SEA WATER
AN ATTACHMENT
LINES GP-AUXILIARY FRESH WATER
7W-6320 LINES GP-AUXILIARY FRESH WATER
7W6320 LINES GROUP-AUXILIARY-FRESH WATER
AN ATTACHMENT
AFTERCOOLER GP-WATER
8N-0372 AFTERCOOLER GP-WATER
8N0372 WATER AFTERCOOLER GROUP
SERIAL NO. 29Z1 TO 29Z751 INCLUSIVE
AFTERCOOLER GP-WATER
8N-0372 AFTERCOOLER GP-WATER
8N0372 WATER AFTERCOOLER GROUP-SEA AIR
SERIAL NO. 29Z752-UP
AIR CLEANER GP
AIR CLEANER GP
1W-5938 AIR CLEANER GP
1W5938 AIR CLEANER GROUP-TYPE 1
8N3378-PAGE 111
FOR USE WITH REAR MOUNTED WATER COOLED TURBOCHARGERS
AN ATTACHMENT
AIR CLEANER GP
1W-5938 AIR CLEANER GP
1W5938 AIR CLEANER GROUP-TYPE 2
8N3378-PAGE 111
FOR USE WITH REAR MOUNTED WATER COOLED TURBOCHARGERS
AN ATTACHMENT
AIR CLEANER GP
5N-7822 AIR CLEANER GP
5N7822 AIR CLEANER GROUP
FOR USE WITH 1W5938 & 8N9303 AIR CLEANERS
AN ATTACHMENT
AIR CLEANER GP
8N-3378 AIR CLEANER GP
8N3378 AIR CLEANER GROUP
PART OF 1W5938 AIR CLEANER GROUP SHOWN ON PAGE 110
AN ATTACHMENT
ADAPTER GP-AIR CLEANER
7N-8549 ADAPTER GP-AIR CLEANER
7N8549 AIR CLEANER ADAPTER GROUP
AN ATTACHMENT
LINES GP-AIR
LINES GP-AIR
4W-0713 LINES GP-AIR
4W0713 AIR LINES GROUP
S/N 29Z752-809
LINES GP-AIR
4W-0713 LINES GP-AIR
4W0713 LINES GP-AIR
S/N 29Z810-UP
LINES GP-AIR
2W-5920 LINES GP-AIR
2W5920 AIR LINES GROUP
LINES GP-AIR
5N-8354 LINES GP-AIR
5N8354 AIR LINES GROUP-PRELUBE INLET & EXHAUST-TYPE 1
FOR USE WITH AIR START WITH AIR PRELUBE
AN ATTACHMENT
LINES GP-AIR
5N-8354 LINES GP-AIR
5N8354 AIR LINES GROUP-PRELUBE INLET & EXHAUST-TYPE 2
7W522-PAGE 116A
AN ATTACHMENT
MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
1W-5937 MANIFOLD GP-EXHAUST
1W5937 EXHAUST MANIFOLD GROUP
SERIAL NO. 29Z1 TO 29Z747 INCLUSIVE
MANIFOLD GP-EXHAUST
1W-5937 MANIFOLD GP-EXHAUST
1W5937 EXHAUST MANIFOLD GROUP
SERIAL NO. 29Z748-UP
TURBOCHARGER GP
TURBOCHARGER GP
1W-5933 TURBOCHARGER GP
1W5933 TURBOCHARGER GROUP
SERIAL NO. 29Z1 TO 29Z751 INCLUSIVE
1W7645-PAGE 118, 1W7646-PAGE 118
TURBOCHARGER GP
1W-7646 TURBOCHARGER GP
1W7646 TURBOCHARGER GROUP
SERIAL NO. 29Z1 TO 29Z751 INCLUSIVE
2W1644-PAGE 122
PART OF 1W5933 TURBOCHARGER
TURBOCHARGER GP
1W-7645 TURBOCHARGER GP
1W7645 TURBOCHARGER GROUP
SERIAL NO. 29Z1 TO 29Z751 INCLUSIVE
2W1644-PAGE 122. PART OF 1W5933 TURBOCHARGER
FIELD REPLACEMENT FOR 1W7646-PAGE 118
TURBOCHARGER GP
1W-5933 TURBOCHARGER GP
1W5933 TURBOCHARGER GROUP
SERIAL NO. 29Z752 TO 29Z786 & 29Z788 TO 29Z790 INCLUSIVE
4W9109-PAGE 120
TURBOCHARGER GP
4W-9124 TURBOCHARGER GP
4W9124 TURBOCHARGER GROUP
SERIAL NO. 29Z787 & 29Z791-UP
4W9111-PAGE 121
TURBOCHARGER GP
4W-9109 TURBOCHARGER GP
4W9109 TURBOCHARGER GROUP
SERIAL NO. 29Z752 TO 29Z786 & 29Z788 TO 29Z790 INCLUSIVE
4W9133-PAGE 122.01
PART OF 1W5933 TURBOCHARGER
TURBOCHARGER GP
4W-9111 TURBOCHARGER GP
4W9111 TURBOCHARGER GROUP
SERIAL NO. 29Z787 & 29Z791-UP
2W7224-PAGE 122.02
PART OF 4W9124 TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
2W-1644 CARTRIDGE GP-TURBOCHARGER
2W1644 CARTRIDGE GROUP
SERIAL NO. 29Z1 TO 29Z750 INCLUSIVE
PART OF 1W7645 & 1W7646 TURBOCHARGERS
CARTRIDGE GP-TURBOCHARGER
4W-9133 CARTRIDGE GP-TURBOCHARGER
4W9133 TURBOCHARGER CARTRIDGE GROUP
SERIAL NO. 29Z752 TO 29Z786 & 29Z788 TO 29Z790 INCLUSIVE
PART OF 4W9109 TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
2W-7224 CARTRIDGE GP-TURBOCHARGER
2W7224 CARTRIDGE GROUP
SERIAL NO. 29Z787 & 29Z791-UP
PART OF 4W9111 TURBOCHARGER
LINES GP-TURBOCHARGER OIL
1W-5934 LINES GP-TURBOCHARGER OIL
1W5934 TURBOCHARGER OIL LINES GROUP
LINES GP-EXHAUST
ELBOW GP-EXHAUST
8N-8487 ELBOW GP-EXHAUST
8N8487 EXHAUST ELBOW GROUP
FLANGE GP-EXHAUST
2W-7871 FLANGE GP-EXHAUST
2W7871 EXHAUST FLANGE GROUP
FOR USE WITH 323.9 MM(12.75") PIPE. 2W4076 MUFFLER IS AVAILABLE
AN ATTACHMENT
FLANGE GP-EXHAUST
7N-6963 FLANGE GP-EXHAUST
7N6963 EXHAUST FLANGE GROUP
FOR USE WITH 305 MM (12") PIPE. 5L6954 ELBOW & 5L8400 MUFFLER ARE
AVAILABLE. AN ATTACHMENT
FLANGE GP-EXHAUST
1W-9488 FLANGE GP-EXHAUST
1W9488 EXHAUST FLANGE GROUP
FOR USE WITH 355.6 MM (14") PIPE. 5N8529 ELBOW & 1W3392 MUFFLER ARE
AVAILABLE
AN ATTACHMENT
FLANGE GP-EXHAUST
2W-7756 FLANGE GP-EXHAUST
2W7756 EXHAUST FLANGE GROUP. 355.5 MM (14") MODULAR
2W4074 MUFFLER IS AVAILABLE. AN ATTACHMENT
FITTING GP-EXHAUST
5N-9527 FITTING GP-EXHAUST
5N9527 EXHAUST FITTING GROUP-FLEXIBLE-305 MM (12")
FOR USE ON WATERFOOLED & HOT EXHAUST STACKS
AN ATTACHMENT
FITTING GP-EXHAUST
1W-9487 FITTING GP-EXHAUST
1W9487 EXHAUST FITTING GROUP. FOR USE WITH 355.6 MM (14") PIPE
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
New Check Valve Available{1063,1355}
1994/04/18
Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fume Recirculation{1063}
1999/02/01
A New Gasket is Used {1063, 1380}
2005/05/23
Special Instruction
Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
Service Letter-NACD
Product Support Program For Replacing The Seal Collar On Seawater Pump Groups On Certain 3508B, 3512, 3512B, 3516, And 3516B Marine Engines
Product Support Program For Replacing The Seal Collar On Seawater Pump Groups On Certain 3508B, 3512, 3512B, 3516, And 3516B Marine Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
An Improperly Vented Aftercooler May Force Coolant Out Of The Radiator Overflow Tube
An Improperly Vented Aftercooler May Force Coolant Out Of The Radiator Overflow Tube
Specifications
Aftercooler
3500 Marine Engines
Aftercooler
3500 Marine Engines
Service Letter-China
Product Support Program For Replacing The Seal Collar On Seawater Pump Groups On Certain 3508B, 3512, 3512B, 3516, And 3516B Marine Engines
Product Support Program For Replacing The Seal Collar On Seawater Pump Groups On Certain 3508B, 3512, 3512B, 3516, And 3516B Marine Engines
Service Letter-Asia
Systems Operation
Aftercooler
3500 Marine Engines
Reuse And Salvage Guidelines
Visual Inspection and Salvage Procedures for Aftercoolers in 3500 Engines {1063, 1063, 1379}
Visual Inspection and Salvage Procedures for Aftercoolers in 3500 Engines {1063, 1063, 1379}
Service Letter-APD
Product Support Program For Replacing The Seal Collar On Seawater Pump Groups On Certain 3508B, 3512, 3512B, 3516, And 3516B Marine Engines
Product Support Program For Replacing The Seal Collar On Seawater Pump Groups On Certain 3508B, 3512, 3512B, 3516, And 3516B Marine Engines
Disassembly and Assembly
Aftercooler
3508, 3512 & 3516 MARINE ENGINES
Aftercooler
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
New Nut In Fresh And Raw Water Pumps Has More Corrosion Resistance{1371}
1989/02/13
New Seal Used In Auxiliary Water Pump Groups{1361}
1989/06/19
New Auxiliary Water Pump Groups Used{1371}
1991/09/23
New Auxiliary Water Pump Groups Used{1371}
1991/11/18
Thicker Gasket Helps Prevent Leaks In Auxiliary Sea Water Pump Applications {1371}
1993/03/01
Engine News
Dual Element Air Cleaner Group Available
1985/09/01
Stronger Air Cleaner Support Assembly
1985/10/01
Round Air Cleaner Inlet Adapter Available
1986/01/01
New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups
1987/03/01
Improved Air Cleaner Element Has Pleats That Are Evenly Spaced
1988/09/01
New Bracket And Support Assemblies Help Prevent Cracks In Air Cleaner Housings
1991/05/01
Air Filter Indicator Maintenance
1993/10/01
New Air Filter Restriction Indicator Now Reads 25 Inches Maximum{7452,1051}
1995/06/01
Air Cleaner Inlets Rotated To Upward Position{1051}
1995/11/20
Special Instruction
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
Maintenance Requirements for Engines with Crankcase Ventilation Systems{1051, 1054, 1063, 1317}
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Disassembly and Assembly
Air Cleaner Housings
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Dual Element Air Cleaner Group Available{1054,1051}
1985/08/26
Stronger Air Cleaner Support Assembly{1050,1051}
1985/10/07
Round Air Cleaner Inlet Adapter Available{1051}
1986/01/13
New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups {1051}
1987/03/09
Improved Air Cleaner Element Has Pleats That Are Evenly Spaced{1054}
1988/09/05
New Bracket And Support Assemblies Help Prevent Cracks In Air Cleaner Housings{1051}
1991/05/06
Truck Engine News
A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2004/01/01
Engine News
New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group
1989/11/01
New Locknut And Torque Eliminates Joint Relaxation
1993/09/01
New Exhaust Shield Group For Dry Exhaust Manifold Engines Has Updated Shield Assemblies {1059,1061,1067,1073}
1999/06/01
A Previous High Temperature Locknut is Used in Engine Exhaust System Groups {7553}
2003/08/01
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Specifications
Air Inlet and Exhaust Lines
3500 Marine Engines
Reuse And Salvage Guidelines
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Testing and Adjusting
Restriction of Air Inlet and Exhaust
3500 Marine Engines
Measuring Exhaust Temperature
3500 Marine Engines
Service Magazine
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/11
Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25
New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group{1059}
1989/11/13
Engine News
Dual Element Air Cleaner Group Available
1985/09/01
Stronger Air Cleaner Support Assembly
1985/10/01
Round Air Cleaner Inlet Adapter Available
1986/01/01
New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups
1987/03/01
Improved Air Cleaner Element Has Pleats That Are Evenly Spaced
1988/09/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
New Bracket And Support Assemblies Help Prevent Cracks In Air Cleaner Housings
1991/05/01
Center Mating Parts Of Air Inlet Piping Extends Service Life
1993/07/01
Air Filter Indicator Maintenance
1993/10/01
New Air Filter Restriction Indicator Now Reads 25 Inches Maximum{7452,1051}
1995/06/01
Air Cleaner Inlets Rotated To Upward Position{1051}
1995/11/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Specifications
Air Inlet and Exhaust Lines
3500 Marine Engines
Testing and Adjusting
Restriction of Air Inlet and Exhaust
3500 Marine Engines
Disassembly and Assembly
Air Cleaner Housings
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Dual Element Air Cleaner Group Available{1054,1051}
1985/08/26
Stronger Air Cleaner Support Assembly{1050,1051}
1985/10/07
Round Air Cleaner Inlet Adapter Available{1051}
1986/01/13
New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups {1051}
1987/03/09
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
New Bracket And Support Assemblies Help Prevent Cracks In Air Cleaner Housings{1051}
1991/05/06
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Engine News
Improved Serviceability Of Water Cooled Exhaust Manifolds
1985/06/01
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation
1985/12/01
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger
1986/01/01
Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing
1988/05/01
New Watercooled Exhaust Manifolds
1989/08/01
Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section.
1989/11/01
New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group
1989/11/01
New Exhaust Manifold Sections Contain A Port To Install Temperature Sensors {1059,1921}
1997/02/17
New Turbocharger Supports Help Prevent Watercooled Exhaust Manifold Cracking{1059,1052}
1999/05/01
New Exhaust Shield Group For Dry Exhaust Manifold Engines Has Updated Shield Assemblies {1059,1061,1067,1073}
1999/06/01
Improved Gasket for the Exhaust Elbow {1059}
2003/11/01
Service Letter-NACD
Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3516 Marine Engines
Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3516 Marine Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
BOLT BREAKAGE AT EXHAUST MANIFOLD SLIP JOINTS
BOLT BREAKAGE AT EXHAUST MANIFOLD SLIP JOINTS
Specifications
Exhaust Manifold
3500 Marine Engines
Exhaust Manifold
3500 Marine Engines
Service Letter-China
Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3516 Marine Engines
Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3516 Marine Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Salvage of Weld on Water-Cooled Exhaust Manifold for 3500 Series Engines {0679, 1059}
Salvage of Weld on Water-Cooled Exhaust Manifold for 3500 Series Engines {0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Service Letter-APD
Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3516 Marine Engines
Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3516 Marine Engines
Testing and Adjusting
Measuring Exhaust Temperature
3500 Marine Engines
Disassembly and Assembly
Exhaust Manifolds
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Improved Serviceability Of Water Cooled Exhaust Manifolds{1350,1355}
1985/06/03
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/11
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger{1059}
1986/01/13
Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25
New Watercooled Exhaust Manifolds{1059}
1989/08/14
Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section{1059}
1989/10/30
New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group{1059}
1989/11/13
New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21
New Locknut And Torque Eliminates Joint Relaxation {1059}
1993/09/13
Testing and Adjusting
Measuring Inlet Manifold Pressure
3500 Marine Engines
Service Magazine
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Stronger Air Cleaner Support Assembly
1985/10/01
Improved Air Cleaner Element Has Pleats That Are Evenly Spaced
1988/09/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Systems Operation
Air Inlet and Exhaust System Operation
3500 Marine Engines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Improved Turbocharger Oil Drain Elbows{1307,1052}
1984/12/10
Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line{1050,1052,1053}
1984/12/10
Improved Remote Shutoff Group Has New Pressure Control Group{1050,1078,1085}
1985/05/13
Dual Element Air Cleaner Group Available{1054,1051}
1985/08/26
Stronger Air Cleaner Support Assembly{1050,1051}
1985/10/07
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/11
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger{1059}
1986/01/13
Round Air Cleaner Inlet Adapter Available{1051}
1986/01/13
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Watercooled Exhaust Manifolds{1059}
1989/08/14
New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group{7418,1078}
1989/10/23
Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section{1059}
1989/10/30
New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group{1059}
1989/11/13
New Bracket And Support Assemblies Help Prevent Cracks In Air Cleaner Housings{1051}
1991/05/06
New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Special Instruction
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Engine News
New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group
1989/11/01
Specifications
Air Intake Shutoff
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Manual Shutoff
3500 Marine Engines
Air Shutoff
3500 Marine Engines
Disassembly and Assembly
Air Intake Shutoff (3508)
3508, 3512 & 3516 MARINE ENGINES
Air Intake Shutoff (3516)
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Improved Remote Shutoff Group Has New Pressure Control Group{1050,1078,1085}
1985/05/13
New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group{7418,1078}
1989/10/23
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Service Magazine
Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures {0701, 0776, 0781}
2004/04/01
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Improved Turbocharger Oil Drain Elbows
1984/12/12
Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line
1984/12/12
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger
1986/01/01
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Turbine Oil Seal Improved On Turbochargers
1988/08/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing
1989/05/01
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak
1990/03/01
"Off-Size" Bearing Kits Available
1991/10/01
New Exhaust Bellows Used In Turbocharger Group
1992/06/01
New Bellows Assemblies Used In Turbocharger Groups
1992/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
New Turbocharger Supports Help Prevent Watercooled Exhaust Manifold Cracking{1059,1052}
1999/05/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
New Turbochargers Provide Increased Bearing Life {1052}
2000/03/01
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
A New Torque Specification Is Used for the V-Band Clamp of Turbochargers on Certain 3500 and C175-16 Engines {1052, 7553}
2012/02/01
Cat<SUP>&reg;</SUP> Reman Now Offers New Turbocharger and Cartridge Groups for Certain Commercial Engines {1052, 1053}
2014/09/12
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
A New Dowel Is Now Used For The Turbocharger Drain On Certain 3512C Locomotive Engines {1052, 1053}
A New Dowel Is Now Used For The Turbocharger Drain On Certain 3512C Locomotive Engines {1052, 1053}
Some Turbochargers and Turbocharger Cartridges are Difficult to Spin Before Lubricating the Center Housing for Certain Engine Applications {1052, 1053}
2015/08/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Modifying the Turbocharger Group on Certain 3500 Marine Engines and 797 and 797B Off-Highway Trucks{1052, 1053}
Modifying the Turbocharger Group on Certain 3500 Marine Engines and 797 and 797B Off-Highway Trucks{1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV72 &amp; TW72) (TV78 &amp; TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV92 &amp; TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (C153 &amp; W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Accumulator
3500 Marine Engines
Turbocharger
3500 Marine Engines
Turbocharger
3500 Marine Engines
Systems Operation
Turbocharger
3500 Marine Engines
Accumulator
3500 Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Testing and Adjusting
Accumulator Pressure - Test
3500 Marine Engines
Disassembly and Assembly
Turbochargers (TW81, TW91)
3508, 3512 & 3516 MARINE ENGINES
Turbocharger (W153)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (TW81)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (TW91)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (W153)
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Improved Turbocharger Oil Drain Elbows{1307,1052}
1984/12/10
Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line{1050,1052,1053}
1984/12/10
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Bracket Added To The Watercooled Exhaust Manifold Group To Help Support Turbocharger{1059}
1986/01/13
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25
Turbine Oil Seal Improved On Turbochargers{1053,1077}
1988/08/08
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing {1052,1060}
1989/05/01
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak{1053,1077}
1990/03/05
New Exhaust Bellows Used In Turbocharger Group{1052}
1992/06/15
New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
Insulation on Exhaust Components {1000}
2006/03/06
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Engine News
New Locknut And Torque Eliminates Joint Relaxation
1993/09/01
Disassembly and Assembly
Exhaust Elbow (Wet)
3508, 3512 & 3516 MARINE ENGINES
Exhaust Elbow (Dry)
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/11
Improved RH Watercooled Exhaust Manifold And Exhaust System Sealing {1059,1070,1061,1050}
1988/04/25
New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group{1059}
1989/11/13

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.