AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N4262 GOVERNOR FASTENER GROUP-L.H.-TYPE 1 PART OF 8N6477, 8N6479, 8N6721, 8N6722, 2W8583, 2W8585, 1W5021 & 7W3332 & 7W3333 WOODWARD GOVERNORS 3516


FUEL SYSTEM
GOVERNOR GP
CONTROL GP-FUEL RATIO

MARINE ENGINE 3516 MARINE ENGINE 29Z
 3516 MARINE ENGINE 29Z00001-00817 SEBP1401 3516 29Z   (1982)

FUEL SYSTEM

GOVERNOR GP
CONTROLET AS
1W-7209 CONTROLET AS
PANEL AS
1W-7207 PANEL AS
FASTENER GP-GOVERNOR
8N-4262 FASTENER GP-GOVERNOR
FASTENER GP-GOVERNOR
8N-4262 FASTENER GP-GOVERNOR
FASTENER GP-GOVERNOR
7N-4867 FASTENER GP-GOVERNOR
FASTENER GP-GOVERNOR
7N-4867 FASTENER GP-GOVERNOR
 

#SEBP14010340
 

8N-4262: FASTENER GP-GOVERNOR

8N4262 GOVERNOR FASTENER GROUP-L.H.-TYPE 1
PART OF 8N6477, 8N6479, 8N6721, 8N6722, 2W8583, 2W8585, 1W5021 &
7W3332 & 7W3333 WOODWARD GOVERNORS
c319357 SEBP1401
8N4262 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-0033 [1] LEVER-GOVERNOR LH  
2. 2B-2694 [1] BOLT  
  9M-1974 [1] WASHER  
3. 2A-4639 [2] BOLT  
4. 5M-2894 C [7] WASHER  
5. 8N-9885 C [1] GASKET-DRIVE HOUSING  
6. 0L-1351 C [4] BOLT  
7. 1W-8434 C [1] SUPPORT-GOVERNOR  
8. 7F-5634 [2] BOLT-GROUND BODY  
9. 4H-1722 [1] SEAL-LIP TYPE  
10. 2W-9063 C [1] WASHER  
11. 7N-9776 [1] LEVER AS-GOVERNOR LH  
12. 8N-8160 C [1] PIN-RACK ACTUATOR  
13. 1W-6033 C [1] COVER  
14. 1A-2029 [5] BOLT  
15. 5F-0304 [2] PLUG-DRAIN  
  4B-8407 [2] GASKET  
16. 9L-9132 C [4] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14010341
 

8N-4262: FASTENER GP-GOVERNOR

8N4262 GOVERNOR FASTENER GROUP-L.H.-TYPE 2
PART OF 8N6477, 8N6479, 8N6721, 8N6722, 2W8583, 2W8585,
1W5021, 7W3332, 7W3333 WOODWARD GOVERNOR
AN ATTACHMENT
c344420 SEBP1401
8N4262 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-0033 [1] LEVER-GOVERNOR LH  
2. 2B-2694 [1] BOLT  
  9M-1974 [1] WASHER  
3. 2A-4639 [2] BOLT  
4. 5M-2894 [7] WASHER  
5. 8N-9885 [1] GASKET-DRIVE HOUSING  
6. 0L-1351 [4] BOLT  
7. 1W-8434 [1] SUPPORT-GOVERNOR  
8. 7F-5634 [2] BOLT-GROUND BODY  
9. 4H-1722 [1] SEAL-LIP TYPE  
10. 2W-9063 [1] WASHER  
11. 7N-9776 [1] LEVER AS-GOVERNOR LH  
12. 8N-8160 [1] PIN-RACK ACTUATOR  
13. 1W-6033 [1] COVER  
14. 1A-2029 [5] BOLT  
15. 9L-9132 C [4] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14010342
 

7N-4867: FASTENER GP-GOVERNOR

7N4867 GOVERNOR FASTENER GROUP
SERIAL NO. 29Z1 TO 29Z809 INCLUSIVE
PART OF 8N6481, 8N9635, 2W8584, 8N6712 & 7W3331 WOODWARD GOVERNORS
c305990 SEBP1401
7N4867 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-0032 [1] LEVER-GOVERNOR RH  
2. 2B-2694 [1] BOLT  
  9M-1974 [1] WASHER  
3. 2A-4639 [2] BOLT  
4. 5M-2894 C [9] WASHER  
5. 8N-9885 C [1] GASKET-DRIVE HOUSING  
6. 0L-1351 [2] BOLT  
7. 1W-8434 C [1] SUPPORT-GOVERNOR  
8. 3D-2871 [2] STUD  
  1D-4717 [2] NUT  
    OR
  0L-1351 C [2] BOLT  
9. 4H-1722 [1] SEAL-LIP TYPE  
10. 7N-5365 [1] WASHER  
11. 7N-9202 [1] LEVER AS  
12. 8N-8160 C [1] PIN-RACK ACTUATOR  
13. 1W-6033 C [1] COVER  
14. 1A-2029 [5] BOLT  
15. 5F-0304 [2] PLUG-DRAIN  
  4B-8407 [2] GASKET  
16. 7F-5634 [2] BOLT-GROUND BODY  
17. 9L-9132 C [2] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14010343
 

7N-4867: FASTENER GP-GOVERNOR

7N4867 GOVERNOR FASTENER GROUP
SERIAL NO. 29Z810-UP
PART OF 2W8584, 7W3331, 8N6481, 8N6712 & 8N9635 WOODWARD GOVERNORS
c509023 SEBP1401
7N4867 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-0032 [1] LEVER-GOVERNOR RH  
2. 2B-2694 [1] BOLT  
  9M-1974 [1] WASHER  
3. 2A-4639 [2] BOLT  
4. 5M-2894 C [7] WASHER  
5. 8N-9885 [1] GASKET-DRIVE HOUSING  
6. 0S-1594 [2] BOLT  
7. 1W-8434 [1] SUPPORT-GOVERNOR  
8. 0L-1351 [2] BOLT  
9. 4H-1722 [1] SEAL-LIP TYPE  
10. 2W-9063 C [1] WASHER  
11. 7N-9202 [1] LEVER AS  
12. 8N-8160 [1] PIN-RACK ACTUATOR  
13. 1W-6033 [1] COVER  
14. 1A-2029 [5] BOLT  
15. 7F-5634 [2] BOLT-GROUND BODY  
16. 9L-9132 C [4] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14010344
 

8N-9662: DRIVE GP-GOVERNOR

8N9662 GOVERNOR DRIVE GROUP
PART OF 8N6481,8N9635,8N6477,8N6479,8N6721 & 8N6722 GOVERNOR GROUPS
LISTED ON PAGES 134, 135 & 136. AN ATTACHMENT
c336909 SEBP1401
8N9662 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-2695 [4] BOLT  
  9M-1974 [4] WASHER  
2. 6J-2244 C [1] SEAL-O-RING  
3. 7N-5700 [1] ADAPTER  
4. 1W-3437 C [1] HOUSING AS-DRIVE  
  1W-9379 C [1] BEARING-SLEEVE  
5. 1T-0550 C [1] PIN-SPRING (SPRING)  
6. 6L-3401 [1] GASKET-GOVERNOR HOUSING  
7. 0L-2070 [4] BOLT  
8. 5M-2894 [9] WASHER  
9. 7N-5695 [1] GASKET  
10. 7N-5696 [1] COVER  
11. 0S-1594 [5] BOLT  
12. 1N-3409 [1] GEAR-BEVEL (42 TEETH)  
13. 8N-9392 [1] COUPLING-GOVERNOR DRIVE  
14. 7N-5701 [1] PINION-GOVERNOR DRIVE  
15. 061-9457 C [1] SEAL-O-RING  
16. 6V-8260 C [1] SEAL-O-RING  
17. 9F-2247 [2] PLUG  
18. 7N-5694 CB [1] SHIM  
19. 1A-7669 [2] BOLT  
20. 9S-4182 [1] PLUG  
  6V-5048 C [1] SEAL-O-RING  
21. 6V-3348 C [2] SEAL-O-RING  
22. 1D-4588 [2] BOLT  
23. 4H-8158 [1] RING-RETAINER  
24. 0S-1595 [2] BOLT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14010345
 

1W-2135: DRIVE GP-GOVERNOR

1W2135 GOVERNOR DRIVE GROUP
ALSO PART OF 2W8583, 2W8585, 2W8584, 1W5021, 8N6712, 7W3331,
7W3332 & 7W3333 WOODWARD GOVERNORS
c571853 SEBP1401
1W2135 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-2695 [4] BOLT  
  9M-1974 [4] WASHER-HARD  
2. 6J-2244 C [1] SEAL-O-RING  
3. 7N-5700 [1] ADAPTER  
4. 1W-2133 [1] HOUSING AS-DRIVE  
  1W-9379 C [1] BEARING-SLEEVE  
5. 1T-0550 [2] PIN-SPRING  
6. 8C-5197 [1] SEAL-O-RING  
7. 0L-2070 [4] BOLT  
8. 5M-2894 [9] WASHER  
9. 7N-5695 [1] GASKET  
10. 7N-5696 [1] COVER  
11. 0S-1594 [5] BOLT  
12. 1N-3409 [1] GEAR-BEVEL (42 TEETH)  
13. 8N-9392 [1] COUPLING-GOVERNOR DRIVE  
14. 7N-5701 [1] PINION-GOVERNOR DRIVE  
15. 061-9457 C [1] SEAL-O-RING  
16. 6V-8260 C [1] SEAL-O-RING  
17. 8T-6757 [3] PLUG-PIPE  
18. 7N-5694 B [1] SHIM  
19. 1A-7669 [2] BOLT  
20. 9S-4182 C [2] PLUG  
  6V-5048 C [2] SEAL-O-RING  
21. 6V-3348 C [2] SEAL-O-RING  
22. 1D-4588 [2] BOLT  
23. 4H-8158 [1] RING-RETAINER  
24. 0S-1621 [2] BOLT  
25. 3P-0647 C [4] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14010346
 

1N-4348: LINES GP-FUEL RATIO CONTROL

1N4348 AIR FUEL RATIO CONTROL LINES GROUP
PART OF 8N6477,8N6479,8N6721 & 8N6722 GOVERNOR GROUPS LISTED ON
PAGES 135 & 136. AN ATTACHMENT
c229615 SEBP1401
1N4348 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 001-9440 [1] CONNECTOR  
2. 7K-9197 [1] ELBOW  
3. 2V-5956 [1] HOSE ASSEM. 53.4 cm (21.02 in.)  
4. 030-7946 [3] ELBOW  
  3J-7354 [3] SEAL  
5. 0L-1351 [1] BOLT  
  1D-4717 [1] NUT  
  5M-2894 [1] WASHER  
6. 3N-7281 [1] HOSE ASSEM. 60.9 cm (24 in.)  
7. 6D-3479 [1] CLIP  
 

#SEBP14010347
 

1N-3247: LINES GP-FUEL RATIO CONTROL

1N3247 AIR FUEL RATIO CONTROL LINES GROUP
PART OF 8N6481 & 8N9635 GOVERNOR GROUPS LISTED ON PAGE 134
c230375 SEBP1401
1N3247 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-5956 [1] HOSE ASSEM. 53.4 cm(21.02 in.)  
2. 3J-7354 [3] SEAL  
3. 7K-9197 [1] ELBOW  
4. 3P-6048 C [1] HOSE ASSEM. 71.12 cm(28 in.)  
5. 001-9440 [1] CONNECTOR  
6. 6K-0806 [2] STRAP  
7. 030-7946 [3] ELBOW  
8. 6D-3479 [1] CLIP  
  C   INDICATES CHANGE
 

#SEBP14010348
 

1W-5171: LINES GP-FUEL RATIO CONTROL

1W5171 AIR FUEL RATIO CONTROL LINES GROUP-L.H.-TYPE 1
ALSO PART OF 2W8583, 2W8585, 1W5021, 7W3332 & 7W3333
WOODWARD GOVERNORS
c301733 SEBP1401
1W5171 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 001-9440 [1] CONNECTOR  
2. 7K-9197 [1] ELBOW  
3. 2V-5956 [1] HOSE ASSEM.  
4. 6K-0806 [2] STRAP  
5. 030-7946 [1] ELBOW  
  3J-7354 [1] SEAL  
 

#SEBP14010349
 

1W-2136: LINES GP-FUEL RATIO CONTROL

1W2136 AIR FUEL RATIO CONTROL LINES GROUP
ALSO PART OF 2W8584, 8N6712 & 7W3331 GOVERNORS
c301763 SEBP1401
1W2136 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 001-9440 [1] CONNECTOR-FLARED  
2. 7K-9197 [1] ELBOW  
3. 7N-2539 [1] HOSE AS  
4. 6K-0806 [2] STRAP-CABLE  
5. 030-7946 [1] ELBOW  
  3J-7354 [1] SEAL-O-RING  
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Quadrants Improved In Governor Control Groups
1984/07/11
Low Oil Level In Governor Can Cause Erratic Engine RPM
1985/02/01
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
How To Adjust Arming Pressure On Fuel Ratio Control On Caterpillar 3161 Governor
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Improved Fuel Transfer Pump Cover; Weep Hole Moved
1987/03/01
New Washer Used In Fuel Transfer Pump Group
1987/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Features And Servicing Of The Various Caterpillar 3161 Governors
1987/06/01
New 3161 Marine Governor Provides Better Low Idle Stability
1989/11/01
New "On Engine" Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group
1990/12/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Fuel Injection Pump Bushing Torque Increased
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control
1991/10/01
New 3161 Governor With Improved Fuel Limiter
1993/09/01
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/11/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
New Hydramechanical Shutoff Groups Reduce The Occurrence Of Improper Shutdowns {1289}
2000/07/01
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Installation of 2W8511 Cam Loading Spring{1264}
Installation of 2W8511 Cam Loading Spring{1264}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Schedules For The On-Fuel Injection Test Stand{0782, 1264}
Schedules For The On-Fuel Injection Test Stand{0782, 1264}
Testing And Adjusting Of The Woodward 3161 Governors On The Fuel Injection Test Bench{1264}
Testing And Adjusting Of The Woodward 3161 Governors On The Fuel Injection Test Bench{1264}
Service Letter-NACD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Governor Linkage
3500 Marine Engines
Governor Drive
3500 Marine Engines
Service Letter-China
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Asia
Systems Operation
Systems Operation
CATERPILLAR 3161 GOVERNOR
Electronic Governors
3500 Marine Engines
Governor - 3161
3500 Marine Engines
Service Letter-APD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Testing and Adjusting
Testing & Adjusting
CATERPILLAR 3161 GOVERNOR
Disassembly and Assembly
Fuel Transfer Pump
3508, 3512 & 3516 MARINE ENGINES
Governor (UG-8)
3508, 3512 & 3516 MARINE ENGINES
Governor (3161)
3508, 3512 & 3516 MARINE ENGINES
Governor Drive
3508, 3512 & 3516 MARINE ENGINES
Fuel Injectors
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Special Procedure Needed To Use The 6V3075 Dial Indicator For Fuel Settings{0653,1257}
1984/03/05
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
Quadrants Improved In Governor Control Groups{1265,1264}
1984/05/21
New Fuel Injector Assembly Reduces Smoke When Operating At Lower RPM And Load{1251,1250}
1984/11/26
Low Oil Level In Governor Can Cause Erratic Engine RPM{1287}
1985/01/28
Rough Handling Can Move Droop Lever Out Of Position{1264}
1985/08/05
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
List Of Mechanical Service Meters For Earlier 3500 Series Engines Using Mechanical Service Meters{1286}
1985/09/23
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}
1986/05/26
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23
New Washer Used In Fuel Transfer Pump Group {1256}
1987/03/30
Fuel Injector Trim Bolt {1257}
1987/06/01
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New 3161 Marine Governor Provides Better Low Idle Stability{1264}
1989/11/13
New "On Engine" Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
Fuel Injection Pump Bushing Torque Increased {1253}
1991/04/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New 3161 Governor With Improved Fuel Limiter{1264}
1993/09/20

Caterpillar Parts SIS Catalog 3516 :

PANEL AS
1W-7207 PANEL AS
SHUTOFF & OIL FILLER GP
1W-8578 SHUTOFF & OIL FILLER GP
CONTROLET AS
1W-7209 CONTROLET AS
FLYWEIGHT GP
2W-1219 FLYWEIGHT GP
CAP AS
1W-7202 CAP AS
CASE AS
1W-7208 CASE AS
COVER GP
2W-0782 COVER GP
HOUSING GP-GOVERNOR
2W-1458 HOUSING GP-GOVERNOR
FASTENER GP-GOVERNOR
8N-4262 FASTENER GP-GOVERNOR
FASTENER GP-GOVERNOR
7N-4867 FASTENER GP-GOVERNOR
FASTENER GP-GOVERNOR
7N-4867 FASTENER GP-GOVERNOR
DRIVE GP-GOVERNOR
8N-9662 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
1W-2135 DRIVE GP-GOVERNOR
LINES GP-FUEL RATIO CONTROL
1N-4348 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL RATIO CONTROL
1N-3247 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL RATIO CONTROL
1W-5171 LINES GP-FUEL RATIO CONTROL

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.