AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1N-3574 CYLINDER BLOCK GP FIELD REPLACEMENT FOR @@@@@ 7N-6552@@@@@ 3304 MARINE ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP
DRIVE GP-AUXILIARY
DRIVE GP-PUMP
CYLINDER HEAD GP

MARINE ENGINE 3304 MARINE ENGINE 13E
 3304 Marine Engine 13E00300-UP SEBP1405 3304 13E   (1982)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
2W-0102 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK AS
7N-6552 CYLINDER BLOCK AS
CYLINDER BLOCK GP
1N-3574 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7N-6553 CYLINDER BLOCK GP
 

#SEBP14050020
 

1N-3574: CYLINDER BLOCK GP

1N-3574 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 7N-6552@@@@@
i00145904 SEBP1405
1N3574 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3304 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-6019 C [1] PLUG  
2. 8K-1207 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 1S-9540 [1] DOWEL  
5. 8B-6349 [2] DOWEL (15.88MMX34.92MM)  
6. 5S-8462 [1] STUD  
7. 7M-4046 [2] BUSHING  
8. 8N-4110 [1] BUSHING  
9. 2A-3798 [2] DOWEL  
10. 6N-8003 [5] CAP-CRANKSHAFT BEARING  
11. 7S-3224 [10] BOLT (5/8-11X5.25-IN)  
  2S-5658 [10] WASHER-HARD (17X29X3-MM THK)  
12. 9Y-2991 [4] BUSHING  
13. 9Y-2992 [2] BUSHING  
14. 4B-9782 [5] BALL  
15. 4B-3938 C [1] PLUG-CUP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14050021
 

7N-6553: CYLINDER BLOCK GP

7N-6553 CYLINDER BLOCK GP
i00146116 SEBP1405
7N6553 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3304 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-5496 [1] SEAL-O-RING  
2. 1S-9540 [1] DOWEL  
3. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
4. 4B-3938 [1] PLUG-CUP  
5. 8M-9307 [1] PLUG (CYLINDER BLOCK)  
  6F-7062 [1] WASHER (12.7X19.05X1.83-MM THK)  
6. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
7. 7M-4046 [2] BUSHING  
8. 7N-8021 [1] PLATE-BLOCK  
9. 5B-7652 [2] DOWEL  
10. 7W-7544 [1] GASKET-PLATE  
11. 7N-6552 Y [1] CYLINDER BLOCK AS  
12. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
13. 8K-1207 [2] DOWEL  
14. 8B-6349 [2] DOWEL  
15. 5S-8462 [1] STUD  
16. 8N-4110 [1] BUSHING  
17. 4B-9782 [5] BALL  
18. 9Y-2991 [4] BUSHING  
19. 9Y-2992 [2] BUSHING  
20. 8T-6762 [3] PLUG-PIPE (1/2-14-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14050022
 

1N-4304: CYLINDER HEAD GP

1N-4304 CYLINDER HEAD GP
PART OF 4P-9336, 4P-9337 KIT-ENGINE PARTS, 4W-5446 PARTS GP-MISCELLANEOUS
FIELD REPLACEMENT FOR @@@@@ 7N-8874@@@@@, @@@@@ 7N-6544@@@@@
AN ATTACHMENT
i00683826 SEBP1405
1N4304 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3304 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-4485 [1] VALVE AS-VENT (ENGINE COOLANT)  
2. 148-7425 [8] GUIDE-VALVE (STANDARD)  
  154-6997 ABF GUIDE-VALVE (0.51-MM OS)  
  154-6998 ABF GUIDE-VALVE (0.13-MM OS)  
3. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)(1/4-18 NPTF-THD)  
4. 8T-6762 [3] PLUG-PIPE (1/2-14-THD)(1/2-14-NPTF-THD)  
5. 0S-1594 [4] BOLT (3/8-16X1-IN)  
6. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 5S-6735 [1] GASKET  
8. 1P-6367 [1] COVER  
9. 3B-0623 [4] PLUG-CUP (25.73MM OD)  
10. 3P-1896 [9] PLUG-CUP (35.31MM OD)  
11. 3S-8313 [4] PLUG-CUP (32.08MM OD)  
12. 107-0265 [4] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  ABF INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  ABF INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  ABF INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  ABF INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
13. 107-0268 [4] INSERT-VALVE SEAT (INLET)(STANDARD)  
  ABF INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  ABF INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  ABF INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  ABF INSERT-VALVE SEAT (0.76-MM OS, INLET)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
 

#SEBP14050023
 

7N-6544: CYLINDER HEAD GP

7N-6544 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 1N-4304@@@@@
i00410348 SEBP1405
7N6544 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3304 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 1W-5300 [8] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
3. 7S-7144 [8] SPRING-VALVE  
4. 100-7860 [4] VALVE-INLET  
5. 148-7455 [4] VALVE-EXHAUST  
6. 4P-8915 [1] GASKET-CYLINDER HEAD  
7. 3S-5496 [1] SEAL-O-RING (9.53MM ID)  
8. 9Y-1798 [12] SEAL (24.60MM OD)  
9. 7N-8018 [4] SEAL (17.60MM OD)  
10. 148-7425 [8] GUIDE-VALVE  
11. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)(1/4-18 NPTF THD)  
12. 8T-6762 [3] PLUG-PIPE (1/2-14-THD)(1/2-14 NPTF THD)  
13. 3S-8313 [4] PLUG-CUP (32.08MM OD)  
14. 3B-0623 [4] PLUG-CUP (25.73MM OD)  
15. 107-0265 [4] INSERT-VALVE SEAT (EXHAUST)  
16. 107-0268 [4] INSERT-VALVE SEAT (INLET)  
17. 3P-1896 [9] PLUG-CUP (35.31MM OD)  
 

#SEBP14050024
 

7N-8874: CYLINDER HEAD GP

7N-8874 CYLINDER HEAD GP
S/N 13E550-UP
FIELD REPLACEMENT ORDER @@@@@ 1N-4304@@@@@
i00146122 SEBP1405
7N8874 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3304 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 7N-8018 [4] SEAL  
3. 7S-7144 [8] SPRING-VALVE  
4. 100-7860 [4] VALVE-INLET  
5. 148-7455 [4] VALVE-EXHAUST  
6. 4P-8915 [1] GASKET-CYLINDER HEAD  
7. 3S-5496 [1] SEAL-O-RING  
8. 9Y-1798 [12] SEAL  
9. 1W-5300 [8] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
11. 148-7425 [8] GUIDE-VALVE (STANDARD)  
  154-6997 AB GUIDE-VALVE (0.51-MM OS)  
  154-6998 AB GUIDE-VALVE (0.13-MM OS)  
12. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
13. 3B-0623 [4] PLUG-CUP  
14. 107-0265 [4] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  ABF INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  ABF INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  ABF INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  ABF INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
15. 107-0268 [4] INSERT-VALVE SEAT (INLET)(STANDARD)  
  ABF INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  ABF INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  ABF INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  ABF INSERT-VALVE SEAT (0.76-MM OS, INLET)  
16. 3P-1896 [9] PLUG-CUP  
17. 3S-8313 [4] PLUG-CUP  
18. 8T-6762 [3] PLUG-PIPE (1/2-14-THD)(9.52 CF SQ HOLE)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
 

#SEBP14050025
 

138-2780: DRIVE GP-AUXILIARY

138-2780 DRIVE GP-AUXILIARY
FOR USE WITH HIGH CONTACT RATIO SPUR GEAR TRAIN
AN ATTACHMENT
i00509789 SEBP1405
1382780 DRIVE GP-AUXILIARY Parts scheme
  For full view, you need register

Parts for your 3304 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3776 [1] LOCKNUT  
2. 2H-3779 [1] LOCK  
3. 120-6619 [1] GEAR (33-TEETH)  
4. 5F-3106 [1] SEAL-O-RING  
5. 2H-5549 [2] RING-RETAINING  
6. 8H-9789 [2] BALL BEARING  
7. 1W-6254 [1] ADAPTER-AUXILIARY DRIVE  
8. 6L-5274 [1] PULLEY-AUXILIARY DRIVE (2-GROOVE)  
9. 8L-4889 [1] SHAFT-AUXILIARY DRIVE  
10. 0S-1617 [6] BOLT (5/16-18X0.75-IN)  
11. 2H-3910 [1] SEAL-LIP TYPE  
12. 8L-4949 [1] SPACER-BEARING  
 

#SEBP14050026
 

1W-6298: DRIVE GP-AUXILIARY

1W-6298 DRIVE GP-AUXILIARY
CANNOT BE USED WITH HYDRAULIC PUMP DRIVES OR HOOD AND DASH
AN ATTACHMENT
i00352767 SEBP1405
1W6298 DRIVE GP-AUXILIARY Parts scheme
  For full view, you need register

Parts for your 3304 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3776 [1] LOCKNUT  
  2H-3779 [1] LOCK  
2. 8L-4889 [1] SHAFT-AUXILIARY DRIVE  
3. 7N-5848 [1] GEAR (40-TEETH)  
4. 5F-3106 [1] SEAL-O-RING  
5. 1W-6254 [1] ADAPTER-AUXILIARY DRIVE  
6. 2H-3910 [1] SEAL-LIP TYPE  
7. 8H-9789 [2] BALL BEARING  
8. 2H-5549 [2] RING-RETAINING  
9. 0S-1617 [6] BOLT (5/16-18X0.75-IN)  
10. 6L-5274 [1] PULLEY-AUXILIARY DRIVE (2-GROOVE)  
11. 8L-4949 [1] SPACER-BEARING  
 

#SEBP14050027
 

1W-6192: DRIVE GP-PUMP

1W-6192 DRIVE GP-PUMP
2 BOLT/4 BOLT FLANGE, MOUNTED TO LOWER LH REAR OF PUMP HOUSING
Type 1
AN ATTACHMENT
i00352731 SEBP1405
1W6192 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your 3304 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5491 [1] GEAR AS (40-TEETH)  
2. 5S-0907 [1] ORIFICE  
3. 5F-3106 [1] SEAL-O-RING  
4. 1W-6015 [1] ADAPTER-BEARING  
5. 8N-5492 [1] RETAINER  
6. 030-7941 [1] ELBOW  
7. 034-8348 [1] HOSE AS (.61M 24IN)  
8. 3B-7764 [1] BUSHING (REDUCING)  
9. 6K-1972 [1] ELBOW-FLARED  
10. 3J-7354 [1] SEAL-O-RING  
11. 1D-4586 [2] BOLT (5/8-11X3.5-IN)  
  5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
12. 1D-4541 [2] BOLT (5/16-18X3-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP14050028
 

1W-6192: DRIVE GP-PUMP

1W-6192 DRIVE GP-PUMP
2 BOLT/4 BOLT FLANGE, MOUNTED TO LOWER LH REAR OF PUMP HOUSING
Type 2
AN ATTACHMENT
i00352732 SEBP1405
1W6192 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your 3304 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-4941 C [1] GEAR AS (40-TEETH)  
2. 5S-0907 [1] ORIFICE  
3. 5F-3106 [1] SEAL-O-RING  
4. 4W-4925 C [1] BEARING-ADAPTER (HYD PUMP DRIVE)  
5. 8N-5492 [1] RETAINER  
6. 030-7946 C [1] ELBOW  
7. 034-8348 [1] HOSE AS  
8. 3B-7764 [1] BUSHING (REDUCING)  
9. 6K-1972 [1] ELBOW-FLARED  
10. 3J-7354 [1] SEAL-O-RING  
11. 1D-4586 [2] BOLT (5/8-11X3.5-IN)  
  5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
12. 1D-4540 C [2] BOLT (5/16-18X2.75-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14050029
 

7N-9534: FASTENER GP-CYLINDER HEAD

7N-9534 FASTENER GP-CYLINDER HEAD
i00146123 SEBP1405
7N9534 FASTENER GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 3304 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-9603 [5] BOLT (3/8-16X5-IN)  
2. 1B-7709 C [3] BOLT (5/8-11X8-IN)  
3. 1D-4595 [14] BOLT (5/8-11X6-IN)  
4. 2S-0736 C [17] WASHER-HARD (17X27X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Remanufactured Short Blocks Available For All 3304 Engines
1987/08/01
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service
1991/05/01
Be Sure To Use Correct Cup Plugs On OR2077, OR2554, And OR3258 Remanufactured 3304 And 3306 Short Blocks
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
Water Cooled Turbine Housings May Require Larger Core Plugs{1065,1050}
1994/11/01
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Installation of 0R2077 Remanufactured Short Block Group{1200}
Installation of 0R2077 Remanufactured Short Block Group{1200}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Piston Cooling Jet
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Liner
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Liner Projection
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Connecting Rod And Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Cylinder Head Assembly &amp; Spacer Plate
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Pack
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Piston Cooling Orifices
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Head Assembly And Spacer Plate
3304B & 3306B MARINE ENGINES
Cylinder Liners
3304B & 3306B MARINE ENGINES
Crankshaft Main Bearings
3304B & 3306B MARINE ENGINES
Camshaft Bearings
3304B & 3306B MARINE ENGINES
Piston Cooling Orifices
3304B & 3306B MARINE ENGINES
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Caterpillar Parts SIS Catalog 3304 :

CYLINDER BLOCK AS
7N-6552 CYLINDER BLOCK AS
CRANKSHAFT GP
6N-8080 CRANKSHAFT GP
CRANKSHAFT GP
6N-8080 CRANKSHAFT GP
CRANKSHAFT AS
4N-7695 CRANKSHAFT AS
CRANKSHAFT AS
4N-7692 CRANKSHAFT AS
CRANKSHAFT AS
337-0872 CRANKSHAFT AS
CRANKSHAFT AS
2W-7960 CRANKSHAFT AS
COVER GP-VALVE MECHANISM
8N-4446 COVER GP-VALVE MECHANISM
CYLINDER BLOCK GP
7N-6553 CYLINDER BLOCK GP
CYLINDER HEAD GP
1N-4304 CYLINDER HEAD GP
CYLINDER HEAD GP
7N-6544 CYLINDER HEAD GP
CYLINDER HEAD GP
7N-8874 CYLINDER HEAD GP
DRIVE GP-AUXILIARY
138-2780 DRIVE GP-AUXILIARY
DRIVE GP-AUXILIARY
1W-6298 DRIVE GP-AUXILIARY
DRIVE GP-PUMP
1W-6192 DRIVE GP-PUMP
DRIVE GP-PUMP
1W-6192 DRIVE GP-PUMP

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.