7N-3496 FLYWHEEL GP S/N 85Z1-3763 ALSO AN ATTACHMENT 3306 GEN SET ENGINE

7N-3496 FLYWHEEL GP
S/N 85Z1-3763
ALSO AN ATTACHMENT

i00409167 SEBP1406

For full view, you need register

Parts for your 3306 GEN SET ENGINE:

Pos.	Part No	Qty	Parts name
1.	0S-1600	[9]	BOLT (5/8-18X2.5-IN)
2.	7N-0749	[1]	FLYWHEEL AS
3.	7N-9146	[1]	GEAR (156-TEETH)

#SEBP14060081

8L-5078: FLYWHEEL GP

8L-5078 FLYWHEEL GP
S/N 85Z1-3763
FOR USE WITH SAE NO. 1 HOUSING
AN ATTACHMENT

i00427764 SEBP1406

For full view, you need register

Parts for your 3306 GEN SET ENGINE:

Pos.	Part No	Qty	Parts name
1.	6N-5730 C	[1]	FLYWHEEL AS
2.	8L-4860	[1]	GEAR-FLYWHEEL (156-TEETH)
3.	0S-1600	[9]	BOLT (5/8-18X2.5-IN)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP14060082

9L-4380: FLYWHEEL GP

9L-4380 FLYWHEEL GP
S/N 85Z1-3763
FOR USE WITH 14 INCH 2 PLATE SPICER LIPE-ROLLWAY ML OR PT CLUTCH, WITH SAE NO.2 HOUSING, HAS ADEQUATE CLEARANCE FOR SUPER DUTY CLUTCH
AN ATTACHMENT

i00435084 SEBP1406

For full view, you need register

Parts for your 3306 GEN SET ENGINE:

Pos.	Part No	Qty	Parts name
1.	9N-2082 CY	[1]	FLYWHEEL AS
2.	0S-1576	[9]	BOLT (5/8-18X2-IN)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP14060083

9N-3136: FLYWHEEL GP

9N-3136 FLYWHEEL GP
S/N 85Z1-3763
ONLY FOR USE WITH 15.5 INCH 2 PLATE SPICER CLUTCH, WITH SAE NO. 1 HOUSING, HAS ADEQUATE CLEARANCE FOR A SUPER DUTY CLUTCH
AN ATTACHMENT

i00436812 SEBP1406

For full view, you need register

Parts for your 3306 GEN SET ENGINE:

Pos.	Part No	Qty	Parts name
1.	2W-6834	[1]	FLYWHEEL AS
2.	7N-9146	[1]	GEAR (156-TEETH)
3.	5B-0841	[9]	BOLT (5/8-18X1.75-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP14060084

1W-5634: GEAR GP-FRONT

GEAR GP-FRONT

1W-5634 GEAR GP-FRONT -TIMING
S/N 85Z1-3763

i00144991 SEBP1406

For full view, you need register

Parts for your 3306 GEN SET ENGINE:

Pos.	Part No	Qty	Parts name
1.	1A-1135 C	[1]	BOLT (5/8-11X2-IN)
	7N-2994	[1]	WASHER (49.3X16.25X12.3-MM THK)
2.	7W-0508 C	[1]	GEAR-FUEL PUMP DRIVE (80-TEETH)
3.	0S-1594	[2]	BOLT (3/8-16X1-IN)
	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
4.	7N-4791	[1]	GEAR AS-FUEL PUMP IDLER (57-TEETH)
	5S-7630	[1]	BUSHING
5.	5B-9079	[1]	NUT-JAM (3/8-24-THD)
6.	1W-4402	[1]	GEAR-CAMSHAFT (80-TEETH)
7.	8N-4959	[1]	SHAFT-DRIVE IDLER
8.	8N-4960	[1]	PLATE-THRUST
9.	0S-1618	[2]	BOLT (5/16-18X1-IN)
10.	7N-4722	[1]	GEAR AS-IDLER (60-TEETH)
	2P-1168	[1]	BUSHING
11.	0S-1748	[4]	BOLT (3/8-24X2-IN)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP14060085

4W-6146: GUARD GP-BELT

4W-6146 GUARD GP-BELT
S/N 85Z1-3763
FOR USE WITH ALTERNATOR
CANNOT BE USED WITH HOOD & DASH, BELT TIGHTENER,"A" SIZE (9.5 SQ FT) RADIATOR, EXPANSION TANK OR RH OIL FILLER
AN ATTACHMENT

i00540285 SEBP1406

For full view, you need register

Parts for your 3306 GEN SET ENGINE:

Pos.	Part No	Qty	Parts name
1.	4W-6142	[1]	GUARD AS
2.	4W-5967	[1]	GUARD AS
	1F-0750	[3]	NUT-WELD (3/8-16-THD)
3.	4W-7071	[1]	BRACKET AS
	1F-0750	[2]	NUT-WELD (3/8-16-THD)
4.	0L-1351	[17]	BOLT (3/8-16X0.875-IN)
5.	5P-1075	[9]	WASHER-HARD (10.2X22.5X3-MM THK)
6.	6N-8863	[8]	WASHER (10.2X32X2.5-MM THK)
7.	0S-1585	[4]	BOLT (1/2-13X1.5-IN)
8.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
9.	4W-7746	[1]	PLATE AS
	1F-0750	[2]	NUT-WELD (3/8-16-THD)
10.	4W-7744	[1]	PLATE
11.	2D-4867	[1]	FITTING-GREASE (1/8-27 PTF)(BELT GUARD)
12.	124-0174	[1]	CLIP (LOOP)
13.	3N-7229 I	[1]	HOSE AS
14.	8L-6557	[1]	CONNECTOR
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP14060086

4W-6147: GUARD GP-BELT

4W-6147 GUARD GP-BELT
S/N 85Z1-3763
FOR USE WITH BELT TIGHTENER
CANNOT BE USED WITH HOOD & DASH, ALTERNATOR, "A"SIZE (9.5 SQ FT) RADIATOR, EXPANSION TANK OR RH OIL FILLER
AN ATTACHMENT

i00540286 SEBP1406

For full view, you need register

Parts for your 3306 GEN SET ENGINE:

Pos.	Part No	Qty	Parts name
1.	4W-6142	[1]	GUARD AS
2.	4W-5968	[1]	GUARD AS
	1F-0750	[3]	NUT-WELD (3/8-16-THD)
3.	4W-7071	[1]	BRACKET AS
	1F-0750	[2]	NUT-WELD (3/8-16-THD)
4.	0L-1351	[17]	BOLT (3/8-16X0.875-IN)
5.	5P-1075	[9]	WASHER-HARD (10.2X22.5X3-MM THK)
6.	6N-8863	[8]	WASHER (10.2X32X2.5-MM THK)
7.	0S-1585	[4]	BOLT (1/2-13X1.5-IN)
8.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
9.	4W-7746	[1]	PLATE AS
	1F-0750	[2]	NUT-WELD (3/8-16-THD)
10.	4W-7744	[1]	PLATE
11.	2D-4867	[1]	FITTING-GREASE (1/8-27 PTF)(BELT GUARD)
12.	124-0174	[1]	CLIP (LOOP)
13.	3N-7229 I	[1]	HOSE AS
14.	8L-6557	[1]	CONNECTOR
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP14060087

7E-0138: GUARD GP-BELT

7E-0138 GUARD GP-BELT
S/N 85Z1-3763
FOR USE WITH ALTERNATOR
CANNOT BE USED WITH AUTO-START STOP SYSTEM
AN ATTACHMENT

i00971620 SEBP1406

For full view, you need register

Parts for your 3306 GEN SET ENGINE:

Pos.	Part No	Qty	Parts name
1.	7E-0144	[1]	GUARD AS (RIGHT HAND)
	9F-2978	[2]	NUT-WELD (3/8-16-THD)
2.	7X-0578	[8]	WASHER-HARD (10.2X32X2.5-MM THK)
3.	5S-7379	[10]	BOLT (3/8-16X0.875-IN)
4.	7E-0141	[1]	GUARD AS (LEFT HAND)
5.	5K-0906	[1]	BOLT (5/16-18X0.625-IN)
6.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
7.	7E-3170	[1]	BRACKET
8.	6V-8189	[1]	NUT (5/16-18-THD)
9.	4M-0061	[1]	BOLT (5/16-18X0.75-IN)
10.	8L-6557	[1]	CONNECTOR
11.	124-0174	[1]	CLIP (LOOP)
12.	3N-7229 I	[1]	HOSE AS
13.	2D-4867	[1]	FITTING-GREASE (1/8-27 PTF)(BELT GUARD)
14.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
15.	5P-2566	[4]	BOLT (1/2-13X1.5-IN)
16.	4W-7071	[1]	BRACKET AS
	9F-2978	[2]	NUT-WELD (3/8-16-THD)
17.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP14060088

7E-0139: GUARD GP-BELT

7E-0139 GUARD GP-BELT
S/N 85Z1-3763
FOR USE WITH BELT TIGHTENER
CANNOT BE USED WITH AUTO-START STOP SYSTEM
AN ATTACHMENT

i00985385 SEBP1406

For full view, you need register

Parts for your 3306 GEN SET ENGINE:

Pos.	Part No	Qty	Parts name
1.	4W-7071	[1]	BRACKET AS
	9F-2978	[2]	NUT-WELD (3/8-16-THD)
2.	7E-0142	[1]	GUARD AS
	9F-2978	[2]	NUT-WELD (3/8-16-THD)
3.	7E-0141	[1]	GUARD AS
4.	5S-7379	[10]	BOLT (3/8-16X0.875-IN)
5.	7X-0578	[8]	WASHER-HARD (10.2X32X2.5-MM THK)
6.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
7.	5P-2566	[4]	BOLT (1/2-13X1.5-IN)
8.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
9.	7E-3170	[1]	BRACKET
10.	5K-0906	[1]	BOLT (5/16-18X0.625-IN)
11.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
12.	4M-0061	[1]	BOLT (5/16-18X0.75-IN)
13.	2D-4867	[1]	FITTING-GREASE (1/8-27 PTF)(BELT GUARD)
14.	124-0174	[1]	CLIP (LOOP)
15.	3N-7229 I	[1]	HOSE AS
16.	8L-6557	[1]	CONNECTOR
17.	6V-8189	[1]	NUT (5/16-18-THD)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP14060089

7W-7502: GUARD GP-BELT

7W-7502 GUARD GP-BELT
S/N 85Z2841-3763
FOR USE WITH BELT TIGHTENER
CANNOT BE USED WITH EXPANSION TANK
AN ATTACHMENT

i00566118 SEBP1406

For full view, you need register

Parts for your 3306 GEN SET ENGINE: