AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3306 Marine Engine 84Z00001-UP BASIC ENGINE Caterpillar SIS



MARINE ENGINE 3306B MARINE ENGINE 84Z
 3306 Marine Engine 84Z00001-UP SEBP1407 3306B 84Z   (1982)

Parts group 3306B:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
1N-4406 CAMSHAFT GP
1N-4406 CAMSHAFT GP
SINGLE
CLUTCH GP
CLUTCH AS
1N-7309 CLUTCH AS
1N-7309 CLUTCH AS
PART OF 3N-8823, 3N-8824 POWER TAKE-OFF GP
AN ATTACHMENT
CRANKSHAFT GP
ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL -CRANKSHAFT
FRONT
CRANKSHAFT AS
334-8389 CRANKSHAFT AS
334-8389 CRANKSHAFT AS
PART OF 6N-8079 CRANKSHAFT GP
CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
7N-1292 COVER GP-CYLINDER BLOCK
7N-1292 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7N-1409 COVER GP-CYLINDER BLOCK
7N-1409 COVER GP-CYLINDER BLOCK
S/N 84Z3307-UP
CYLINDER BLOCK GP
1N-3576 CYLINDER BLOCK GP
1N-3576 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 7N-6550@@@@@
CYLINDER BLOCK GP
7N-6550 CYLINDER BLOCK GP
7N-6550 CYLINDER BLOCK GP
PART OF 8N-5286 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 1N-3576@@@@@, 6N-7727 KIT-CYLINDER BLOCK
CYLINDER BLOCK GP
8N-5286 CYLINDER BLOCK GP
8N-5286 CYLINDER BLOCK GP
CYLINDER HEAD GP
COVER GP-CYLINDER HEAD
2P-6530 COVER GP-CYLINDER HEAD
2P-6530 COVER GP-CYLINDER HEAD
CYLINDER HEAD GP
7W-0362 CYLINDER HEAD GP
7W-0362 CYLINDER HEAD GP
S/N 84Z1-917
CONTAINS VALVES
FIELD REPLACEMENT FOR @@@@@ 8N-0246@@@@@
CYLINDER HEAD GP
8N-0246 CYLINDER HEAD GP
8N-0246 CYLINDER HEAD GP
S/N 84Z1-917
OPTIONAL FIELD REPLACEMENT ORDER @@@@@ 8N-6796@@@@@, @@@@@ 7W-0362@@@@@
CYLINDER HEAD GP
8N-0246 CYLINDER HEAD GP
8N-0246 CYLINDER HEAD GP
S/N 84Z918-UP
OPTIONAL FIELD REPLACEMENT ORDER @@@@@ 8N-6796@@@@@, @@@@@ 7W-0362@@@@@
CYLINDER HEAD GP
8N-6796 CYLINDER HEAD GP
8N-6796 CYLINDER HEAD GP
S/N 84Z1-917
CONTAINS NO VALVES
PART OF 7W-0362 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@ 8N-0246@@@@@
CYLINDER HEAD GP
8N-6796 CYLINDER HEAD GP
8N-6796 CYLINDER HEAD GP
S/N 84Z918-UP
CONTAINS NO VALVES
FIELD REPLACEMENT FOR @@@@@ 8N-0246@@@@@
FASTENER GP-CYLINDER HEAD
7N-9536 FASTENER GP-CYLINDER HEAD
7N-9536 FASTENER GP-CYLINDER HEAD
ADDITIONAL CYLINDER HEAD FASTENER BOLT AND WASHER CAN BE FOUND IN 7C-7013.
391-8256 KIT-CYLINDER HEAD GASKET
391-8256 KIT-CYLINDER HEAD GASKET
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. INCLUDES THE TURBO GASKETS BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750 & UP
FIELD REPLACEMENT FOR 142-0228 KIT-GASKET
FIELD INSTALLATION
447-8653 KIT-CYLINDER HEAD GASKET
447-8653 KIT-CYLINDER HEAD GASKET
CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION
DAMPER GP
DAMPER GP
1W-4410 DAMPER GP
1W-4410 DAMPER GP
DAMPER GP
9N-5760 DAMPER GP
9N-5760 DAMPER GP
S/N 84Z1-374
5 DEG. ADVANCE. OIL DAMPED
PART OF 1W-4563 GEAR GP-FRONT
DRIVE GP-AUXILIARY
DRIVE GP-AUXILIARY
138-2780 DRIVE GP-AUXILIARY
138-2780 DRIVE GP-AUXILIARY
FOR USE WITH HIGH CONTACT RATIO SPUR GEAR TRAIN
AN ATTACHMENT
DRIVE GP-AUXILIARY
1W-6298 DRIVE GP-AUXILIARY
1W-6298 DRIVE GP-AUXILIARY
CANNOT BE USED WITH HYDRAULIC PUMP DRIVES OR HOOD AND DASH
AN ATTACHMENT
DRIVE GP-PUMP
DRIVE GP-PUMP
1W-6192 DRIVE GP-PUMP
1W-6192 DRIVE GP-PUMP
2 BOLT/4 BOLT FLANGE, MOUNTED TO LOWER LH REAR OF PUMP HOUSING
Type 1
AN ATTACHMENT
DRIVE GP-PUMP
1W-6192 DRIVE GP-PUMP
1W-6192 DRIVE GP-PUMP
2 BOLT/4 BOLT FLANGE, MOUNTED TO LOWER LH REAR OF PUMP HOUSING
Type 2
AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GP
7N-3496 FLYWHEEL GP
7N-3496 FLYWHEEL GP
MOUNTING GP-TRANSMISSION
1W-9653 MOUNTING GP-TRANSMISSION
1W-9653 MOUNTING GP-TRANSMISSION
FOR USE WITH 4W-8268 RING-PISTON
AN ATTACHMENT
2W-3650 MOUNTING GP-TRANSMISSION
2W-3650 MOUNTING GP-TRANSMISSION
FOR USE WITH @@@@@ 8L-4230@@@@@, @@@@@ 8L-4231@@@@@
AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
1W-4563 GEAR GP-FRONT
1W-4563 GEAR GP-FRONT
S/N 84Z1-374
TIMING
GEAR GP-FRONT
1W-5634 GEAR GP-FRONT
1W-5634 GEAR GP-FRONT -TIMING
S/N 84Z1-2335
GEAR GP-FRONT
1W-5634 GEAR GP-FRONT
1W-5634 GEAR GP-FRONT -TIMING
S/N 84Z2336-UP
HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
8N-2395 HOUSING GP-FLYWHEEL
8N-2395 HOUSING GP-FLYWHEEL
MOUNTING GP-TRANSMISSION
1W-9653 MOUNTING GP-TRANSMISSION
1W-9653 MOUNTING GP-TRANSMISSION
FOR USE WITH 4W-8268 RING-PISTON
AN ATTACHMENT
2W-3650 MOUNTING GP-TRANSMISSION
2W-3650 MOUNTING GP-TRANSMISSION
FOR USE WITH @@@@@ 8L-4230@@@@@, @@@@@ 8L-4231@@@@@
AN ATTACHMENT
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
3N-4923 COVER GP-FRONT HOUSING
3N-4923 COVER GP-FRONT HOUSING
PROVIDES COVERS FOR TOP & BOTTOM ACCESSORY DRIVES AND FOR THE FUEL PUMP DRIVE GEAR
FASTENER GP-FRONT HOUSING
1W-3802 FASTENER GP-FRONT HOUSING
1W-3802 FASTENER GP-FRONT HOUSING
GEAR GP-FRONT
1W-4563 GEAR GP-FRONT
1W-4563 GEAR GP-FRONT
S/N 84Z1-374
TIMING
GEAR GP-FRONT
1W-5634 GEAR GP-FRONT
1W-5634 GEAR GP-FRONT -TIMING
S/N 84Z1-2335
GEAR GP-FRONT
1W-5634 GEAR GP-FRONT
1W-5634 GEAR GP-FRONT -TIMING
S/N 84Z2336-UP
HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
8N-3286 LIFTING GP-ENGINE
8N-3286 LIFTING GP-ENGINE
S/N 84Z1-925
LIFTING GP-ENGINE
8N-3286 LIFTING GP-ENGINE
8N-3286 LIFTING GP-ENGINE
S/N 84Z926-UP
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
3N-3275 SUPPORT GP-ENGINE
3N-3275 SUPPORT GP-ENGINE
PAN GP-OIL
PAN GP-OIL
3N-2899 PAN GP-OIL
3N-2899 PAN GP-OIL
PARTS GP-MISCELLANEOUS
196-9534 KIT-BASIC ENGINE REPAIR
196-9534 KIT-BASIC ENGINE REPAIR
FIELD INSTALLATION
4W-5356 KIT-ENGINE PARTS
4W-5356 KIT-ENGINE PARTS
AN ATTACHMENT
PISTON & ROD GP
PISTON & ROD GP
168-4532 PISTON & ROD GP
168-4532 PISTON & ROD GP
S/N 84Z3393-UP
15:1 RATIO
PISTON & ROD GP
2W-1177 PISTON & ROD GP
2W-1177 PISTON & ROD GP
S/N 84Z1-3392
15:1 RATIO
PISTON GP
2W-1711 PISTON GP
2W-1711 PISTON GP
S/N 84Z1-3392
15:1 RATIO
PART OF 2W-1177 PISTON & ROD GP
POWER TAKE-OFF GP
POWER TAKE-OFF GP
3N-8823 POWER TAKE-OFF GP
3N-8823 POWER TAKE-OFF GP
CLUTCH
FOR USE WITH SHALLOW CASE MARINE GEAR
AN ATTACHMENT
POWER TAKE-OFF GP
3N-8824 POWER TAKE-OFF GP
3N-8824 POWER TAKE-OFF GP -FRONT
FOR USE WITH DEEP CASE MARINE GEAR
AN ATTACHMENT
PULLEY GP
PULLEY GP-CRANKSHAFT
3N-3274 PULLEY GP-CRANKSHAFT
3N-3274 PULLEY GP-CRANKSHAFT
2 GROOVE
FOR USE WITH MARINE ALTERNATOR
PULLEY GP-CRANKSHAFT
3N-6128 PULLEY GP-CRANKSHAFT
3N-6128 PULLEY GP-CRANKSHAFT
2 GROOVE
CANNOT BE USED WITH STUB SHAFT
AN ATTACHMENT
PULLEY GP-FAN DRIVE
8N-2111 PULLEY GP-FAN DRIVE
8N-2111 PULLEY GP-FAN DRIVE
PROVIDES A 0.67:1 FAN RATIO
AN ATTACHMENT
PULLEY GP-FAN DRIVE
8N-2252 PULLEY GP-FAN DRIVE
8N-2252 PULLEY GP-FAN DRIVE
PROVIDES REVERSIBLE FOUR GROOVE PULLEY WITH THE REAR GROOVE FOR FREON COMPRESSOR, OR WHEN REVERSED IS USED WITH A STACK-ON PULLEY
AN ATTACHMENT
SHAFT GP-STUB
SHAFT GP-STUB
6L-2691 SHAFT GP-STUB
6L-2691 SHAFT GP-STUB -FRONT
CANNOT BE USED WITH CRANKSHAFT AUXILIARY PULLEY GP
AN ATTACHMENT
SERPENTINE/V-BELTS
V-BELT GP
5F-3581 V-BELT GP
5F-3581 V-BELT GP -FAN DRIVE
AN ATTACHMENT
061-9508 V-BELT SET
061-9508 V-BELT SET
1118MM (44.02 IN) LONG
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
8N-4745 COVER GP-VALVE MECHANISM
8N-4745 COVER GP-VALVE MECHANISM
VALVE MECHANISM GP
7C-3795 VALVE MECHANISM GP
7C-3795 VALVE MECHANISM GP
PART OF 7C-3796 VALVE MECHANISM GP
AN ATTACHMENT
VALVE MECHANISM GP
7C-3796 VALVE MECHANISM GP
7C-3796 VALVE MECHANISM GP
REQUIRED ON ALL ENGINES WITH RATED SPEEDS OF 1200 RPM OR LOWER
AN ATTACHMENT
VALVE MECHANISM GP
7C-7013 VALVE MECHANISM GP
7C-7013 VALVE MECHANISM GP
S/N 84Z1480-UP
ADDITIONAL CYLINDER HEAD FASTENER BOLTS AND WASHERS CAN BE FOUND IN 7N-9536.
PART OF 7N-8026 VALVE MECHANISM GP
VALVE MECHANISM GP
7N-8026 VALVE MECHANISM GP
7N-8026 VALVE MECHANISM GP
S/N 84Z1-1479
VALVE MECHANISM GP
7N-8026 VALVE MECHANISM GP
7N-8026 VALVE MECHANISM GP
S/N 84Z1480-UP
COVER GP-ENGINE
391-8229 KIT-FRONT COVER GASKET
391-8229 KIT-FRONT COVER GASKET -FRONT STRUCTURE
FIELD INSTALLATION
398-2955 KIT-FRONT COVER GASKET
398-2955 KIT-FRONT COVER GASKET
CLASSIC. 673.1 X 322.6 X 25.4-MM
FIELD INSTALLATION

Information:

(For parts list, see above)

Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Disassembly and Assembly
Balancer Shafts (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Balancer Shaft Bearings (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Balancer Shafts (3304)
3304B & 3306B MARINE ENGINES
Balancer Shaft Bearings (3304)
3304B & 3306B MARINE ENGINES
Specifications
Belt Tension Chart
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fan Drive Belt Tightener
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Engine News
New 8T2998 Lubricant Available
1986/03/01
New Camshafts Used; Camshaft Installation Kits Available
1989/04/01
New Camshaft Has Improved Wear Resistance
1990/11/01
Remanufactured Camshafts And Cam Kits Available For Parts Service
1990/12/01
Correction For Camshaft And Valve Seat Specifications
1992/07/01
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Camshaft
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Service Letter-Asia
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Disassembly and Assembly
Camshaft
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft
3304B & 3306B MARINE ENGINES
Camshaft Bearings
3304B & 3306B MARINE ENGINES
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
New Camshaft Has Improved Wear Resistance{1210,1209}
1990/11/19
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Specifications
Front Power Take-off Clutch Adapter
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed
1979/06/06
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
New Rear Crankshaft Seal Group Used
1984/07/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Caterpillar Crankshaft Heat Code Locations
1986/11/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
A New Type of Main Bearing is Available {1203}
2006/01/02
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1202}
2008/09/15
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Rear Crankshaft Gear And Accessory Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Hub And Damper
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Crankshaft Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Vibration Damper & Pulley (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3304B & 3306B MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Crankshaft Pulley (3304)
3304B & 3306B MARINE ENGINES
Crankshaft
3304B & 3306B MARINE ENGINES
Crankshaft Rear Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
New Rear Crankshaft Seal Group Used {1161}
1984/06/25
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Caterpillar Crankshaft Heat Code Locations{1202}
1986/10/20
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Connecting Rod And Main Bearings Used
1984/04/11
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service
1991/05/01
Be Sure To Use Correct Cup Plugs On OR2077, OR2554, And OR3258 Remanufactured 3304 And 3306 Short Blocks
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Block
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Piston Cooling Jet
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Liner
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Liner Projection
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Connecting Rod And Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Cylinder Head Assembly & Spacer Plate
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Pack
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Piston Cooling Orifices
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Head Assembly And Spacer Plate
3304B & 3306B MARINE ENGINES
Cylinder Liners
3304B & 3306B MARINE ENGINES
Crankshaft Main Bearings
3304B & 3306B MARINE ENGINES
Camshaft Bearings
3304B & 3306B MARINE ENGINES
Piston Cooling Orifices
3304B & 3306B MARINE ENGINES
Service Magazine
Oil Drain Hole Added To Spacer Plate Cylinder Block To Permit Use Of Scroll Fuel System{1201,1221}
1980/01/28
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control
1983/10/26
Improved Cylinder Heads And Valve Covers Used
1984/09/12
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Bleed Holes On Parts Service Cylinder Heads
1985/03/01
Check For Interference Between Water Temperature Regulator And Cylinder Head Bore
1985/06/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Competitive Report: Caterpillar Cylinder Heads vs. Ghinassi Cylinder Heads
1986/11/01
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines
1987/03/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads
1988/06/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Cast Iron Valve Rocker Arm Groups Provide Improved Bearing Retention
1992/02/01
Correction For Camshaft And Valve Seat Specifications
1992/07/01
New Valve Guide Available {1104}
1995/12/20
New Cast Iron Valve Guide And New Exhaust Valve With Chrome Plated Stem Will Help Prevent Early Hour Exhaust Valve Sticking{1104,1105}
1998/05/01
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/11/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New Specification For Reusability of the Intake Valve and the Exhaust Valve {1105}
2002/05/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Special Instruction
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Valves
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Head
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Disassembly and Assembly
Valve Cover (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Cover (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Head Assembly & Spacer Plate
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valves
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Guides
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Water Directors
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Head Assembly And Spacer Plate
3304B & 3306B MARINE ENGINES
Valves
3304B & 3306B MARINE ENGINES
Valve Guides
3304B & 3306B MARINE ENGINES
Valve Seat Inserts
3304B & 3306B MARINE ENGINES
Water Directors
3304B & 3306B MARINE ENGINES
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control{1109}
1983/09/26
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Bleed Holes On Parts Service Cylinder Heads{1100,1101}
1985/02/18
Check For Interference Between Water Temperature Regulator And Cylinder Head Bore{1355}
1985/05/13
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14
Specifications
Crankshaft Hub And Damper
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Crankshaft Pulley (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Vibration Damper & Pulley (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley (3304)
3304B & 3306B MARINE ENGINES
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Specifications
Rear Crankshaft Gear And Accessory Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Auxiliary Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Specifications
Rear Crankshaft Gear And Accessory Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Auxiliary Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Engine News
New Remanufactured Water Pump Groups Include Cast Iron Impellers{1361}
1997/01/22
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Installing 3S6610 Water Pump Cage{1361}
Installing 3S6610 Water Pump Cage{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Water Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Water Pump
3304B & 3306B MARINE ENGINES
Service Magazine
New Water Pump Oil Seal Prevents Leaks{1361}
1983/10/10
Additional Remanufactured Water Pumps Available{1361}
1983/10/31
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Water Pump Gives More Pressure{1361}
1978/09/04
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Installing 3S6610 Water Pump Cage{1361}
Installing 3S6610 Water Pump Cage{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Water Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Service Magazine
Additional Remanufactured Water Pumps Available{1361}
1983/10/31
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Water Pump Gives More Pressure{1361}
1978/09/04
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Instructions For 3306 PC Engine Tune-Up{1000}
Instructions For 3306 PC Engine Tune-Up{1000}
Instructions For 3306 DI Engine Tune-Up{1000}
Instructions For 3306 DI Engine Tune-Up{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Specifications
Flywheel
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Flywheel
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Flywheel
3304B & 3306B MARINE ENGINES
Flywheel Housing
3304B & 3306B MARINE ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Engine News
New Front Housing Assembly And Gaskets Used
1980/12/10
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque
1993/06/01
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups
1993/06/01
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Specifications
Rear Crankshaft Gear And Accessory Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gears
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gear Cover
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Gear Oil Pressure
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Disassembly and Assembly
Crankshaft Front Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Gauge Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gears
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gear Plate
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Timing Gear Cover
3304B & 3306B MARINE ENGINES
Timing Gears
3304B & 3306B MARINE ENGINES
Timing Gear Plate
3304B & 3306B MARINE ENGINES
Service Magazine
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque {1206}
1993/06/14
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
New Rear Crankshaft Seal Group Used
1984/07/11
Specifications
Flywheel Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Flywheel
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Flywheel Housing
3304B & 3306B MARINE ENGINES
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
New Rear Crankshaft Seal Group Used {1161}
1984/06/25
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Engine News
New Front Housing Assembly And Gaskets Used
1980/12/10
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups
1993/06/01
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Specifications
Timing Gears
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gear Cover
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Crankshaft Front Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Gauge Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gears
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Timing Gear Plate
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Timing Gear Cover
3304B & 3306B MARINE ENGINES
Timing Gears
3304B & 3306B MARINE ENGINES
Timing Gear Plate
3304B & 3306B MARINE ENGINES
Service Magazine
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque {1206}
1993/06/14
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed
1979/06/06
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores
1980/08/13
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
New Rear Crankshaft Seal Group Used
1984/07/11
Competitive Report: Caterpillar Cylinder Heads vs. Ghinassi Cylinder Heads
1986/11/01
New Camshafts Used; Camshaft Installation Kits Available
1989/04/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Crankshaft Front Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Balancer Shafts (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Balancer Shaft Bearings (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Crankshaft Rear Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Service Magazine
Oil Drain Hole Added To Spacer Plate Cylinder Block To Permit Use Of Scroll Fuel System{1201,1221}
1980/01/28
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control{1109}
1983/09/26
New Water Pump Oil Seal Prevents Leaks{1361}
1983/10/10
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Additional Remanufactured Water Pumps Available{1361}
1983/10/31
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Water Pump Gives More Pressure{1361}
1978/09/04
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Camshaft Has Improved Wear Resistance{1210,1209}
1990/11/19
Installation Of Zinc Rods In Caterpillar Marine Engines{1350,1388}
1990/12/24
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
New Cast Iron Valve Rocker Arm Groups Provide Improved Bearing Retention{1123}
1992/02/03
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Disassembly and Assembly
Front Support
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Front Support
3304B & 3306B MARINE ENGINES
Service Magazine
0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/11/29
Technical Information Bulletin
3306 Engine Oil Pan Plate Leaks
3306 Engine Oil Pan Plate Leaks
Disassembly and Assembly
Oil Pan
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Oil Pan Plate 1302-010
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Oil Pan
3304B & 3306B MARINE ENGINES
Oil Pan Plate
3304B & 3306B MARINE ENGINES
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Engine News
"Off-Size" Bearing Kits Available
1991/10/01
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores
1980/08/13
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
Remanufactured Connecting Rod Assemblies
1984/02/22
New Connecting Rod And Main Bearings Used
1984/04/11
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01
Installation Of Zinc Rods In Caterpillar Marine Engines
1991/01/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Specifications
Connecting Rod
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Pistons And Rings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Connecting Rod And Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER PACKS FOR CERTAIN 3126/B, 3304/B, 3306/B, C9, C12, C13, 3412E, C30, 3512C, 3516C, G3508/B, G3516B, G3520B ENGINE MODELS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER PACKS FOR CERTAIN 3126/B, 3304/B, 3306/B, C9, C12, C13, 3412E, C30, 3512C, 3516C, G3508/B, G3516B, G3520B ENGINE MODELS
Disassembly and Assembly
Pistons & Connecting Rods
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Pack
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Connecting Rod Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Pistons And Connecting Rods
3304B & 3306B MARINE ENGINES
Connecting Rod Bearings
3304B & 3306B MARINE ENGINES
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores{1213,1214}
1980/08/11
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Installation Of Zinc Rods In Caterpillar Marine Engines{1350,1388}
1990/12/24
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Specifications
Front Power Take-off Clutch Adapter
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Disassembly and Assembly
Front Power Take-Off
3304B & 3306B MARINE ENGINES
Engine News
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Crankshaft Hub And Damper
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Crankshaft Pulley (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Vibration Damper & Pulley (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley (3304)
3304B & 3306B MARINE ENGINES
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Engine News
New 6V87 Gauge Measures Valve Stem Wear
1979/01/10
Separate Valve Stem Gauges Available
1982/08/25
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Belt Tension Chart
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control
1983/10/26
Improved Cylinder Heads And Valve Covers Used
1984/09/12
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Check For Interference Between Water Temperature Regulator And Cylinder Head Bore
1985/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Competitive Report: Caterpillar Cylinder Heads vs. Ghinassi Cylinder Heads
1986/11/01
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines
1987/03/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads
1988/06/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
7S3161 Valve Lifter Has Three Different Designs
1991/10/01
New Cast Iron Valve Rocker Arm Groups Provide Improved Bearing Retention
1992/02/01
Correction For Camshaft And Valve Seat Specifications
1992/07/01
New Cast Iron Valve Guide And New Exhaust Valve With Chrome Plated Stem Will Help Prevent Early Hour Exhaust Valve Sticking{1104,1105}
1998/05/01
New Valve Cover Seal Used{1107}
1998/05/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Valve Rocker Arms And Lifters
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Cover
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Oil Breather Cap
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Disassembly and Assembly
Valve Cover (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Cover (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assembly &amp; Push Rods
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Lifters
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Cover
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly And Push Rods
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly
3304B & 3306B MARINE ENGINES
Valve Lifters
3304B & 3306B MARINE ENGINES
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control{1109}
1983/09/26
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Camshaft Has Improved Wear Resistance{1210,1209}
1990/11/19
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
New Cast Iron Valve Rocker Arm Groups Provide Improved Bearing Retention{1123}
1992/02/03
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Disassembly and Assembly
Flywheel Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3304B & 3306B MARINE ENGINES
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

Caterpillar 3306B
 
Caterpillar 3306B
- Stationary Generator Sets
THOMPSON MACHINERY COMMERCE CORPORATION
 
41,500 
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3306B, Stationary Generator Sets, Construction
33,500 
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
38.001 
Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
 
Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.