AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N-1292 COVER GP-CYLINDER BLOCK 3306 MARINE ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP
HOUSING GP-FRONT
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP

MARINE ENGINE 3306 MARINE ENGINE 84Z
 3306 Marine Engine 84Z00001-UP SEBP1407 3306 84Z   (1982)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
7N-1292 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7N-1409 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
1N-3576 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7N-6550 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-5286 CYLINDER BLOCK GP
 

#SEBP14070010
 

7N-1292: COVER GP-CYLINDER BLOCK

7N-1292 COVER GP-CYLINDER BLOCK
i00122383 SEBP1407
7N1292 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-0130 [1] COVER  
  4M-6480 [1] GASKET  
2. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
3. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
4. 8L-8662 [1] COVER  
  5S-8055 [1] GASKET  
5. 4B-3938 [1] PLUG-CUP  
6. 2A-3798 [2] DOWEL  
7. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 8M-3267 [1] SCREW-HEX SOCKET (3/8-16X0.75-IN)  
 

#SEBP14070011
 

7N-1409: COVER GP-CYLINDER BLOCK

7N-1409 COVER GP-CYLINDER BLOCK
S/N 84Z3307-UP
i00408261 SEBP1407
7N1409 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-6480 [1] GASKET  
2. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 1M-0130 [1] COVER  
4. 4B-3938 [1] PLUG-CUP  
5. 2A-3798 [2] DOWEL  
 

#SEBP14070012
 

2P-6530: COVER GP-CYLINDER HEAD

2P-6530 COVER GP-CYLINDER HEAD
i00122027 SEBP1407
2P6530 COVER GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6367 [1] COVER  
  5S-6735 [1] GASKET  
2. 0S-1594 B [4] BOLT (3/8-16X1-IN)  
  5M-2894 B [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
 

#SEBP14070013
 

3N-4923: COVER GP-FRONT HOUSING

3N-4923 COVER GP-FRONT HOUSING
PROVIDES COVERS FOR TOP & BOTTOM ACCESSORY DRIVES AND FOR THE FUEL PUMP DRIVE GEAR
i00168499 SEBP1407
3N4923 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5769 [1] COVER-HOUSING  
2. 3S-2713 [6] NUT-FULL (3/8-24-THD)  
3. 6N-7887 [1] GASKET-HOUSING COVER  
4. 2P-0220 [1] GASKET-PUMP  
5. 3B-1915 [3] BOLT (3/8-16X1.375-IN)  
6. 3N-4922 [1] COVER-WATER PUMP  
7. 0S-1566 [4] BOLT (5/8-11X1.5-IN)  
8. 5F-3106 [1] SEAL-O-RING  
9. 7N-8374 [1] COVER-PUMP  
10. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
12. 8M-9024 [6] WASHER-HARD (10.2X22.5X5-MM THK)  
13. 2S-4241 [1] PLUG-CUP  
 

#SEBP14070014
 

8N-4745: COVER GP-VALVE MECHANISM

8N-4745 COVER GP-VALVE MECHANISM
i00122470 SEBP1407
8N4745 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-1086 [1] COVER AS-CYLINDER HEAD  
2. 0S-1617 [15] BOLT (5/16-18X0.75-IN)  
3. 9M-1974 [15] WASHER-HARD (8.8X16X2-MM THK)  
4. 133-1247 [1] SEAL-VALVE COVER  
 

#SEBP14070015
 

334-8389: CRANKSHAFT AS

334-8389 CRANKSHAFT AS
PART OF 6N-8079 CRANKSHAFT GP
i03879106 SEBP1407
3348389 CRANKSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4405 [1] GEAR-CRANKSHAFT (40-TEETH)  
2. 5H-2671 [1] KEY-WOODRUFF  
3. 8T-6757 [6] PLUG-PIPE  
 

#SEBP14070016
 

6N-8079: CRANKSHAFT GP

6N-8079 CRANKSHAFT GP
i00145431 SEBP1407
6N8079 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-3652 [2] PLATE-THRUST  
2. 334-8389 Y [1] CRANKSHAFT AS  
3. 232-3233 C [7] BEARING-MAIN (STANDARD)  
  8N-8225 AB [7] BEARING-MAIN (0.25-MM US)  
  8N-8226 AB [7] BEARING-MAIN (0.51-MM US)  
  8N-8227 AB [7] BEARING-MAIN (0.76-MM US)  
  8N-8228 AB [7] BEARING-MAIN (0.51-MM OS)  
  8N-8229 AB [7] BEARING-MAIN (0.25-MM US, 0.51-MM OS)  
  4P-7305 AB [7] BEARING-MAIN (0.51-MM OS, 0.51-MM US)  
  4P-7306 AB [7] BEARING-MAIN (0.51-MM OS, 0.76-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14070017
 

1N-3576: CYLINDER BLOCK GP

1N-3576 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 7N-6550@@@@@
i00121946 SEBP1407
1N3576 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [4] BUSHING  
2. 3J-6019 [1] PLUG  
3. 8K-1207 [2] DOWEL  
4. 4B-5387 [1] PLUG-CUP  
5. 1S-9540 [1] DOWEL  
6. 5B-7652 [2] DOWEL  
7. 6N-8003 [7] CAP-CRANKSHAFT BEARING  
8. 4B-3938 [1] PLUG-CUP  
9. 8B-6349 [2] DOWEL  
10. 5S-8462 [1] STUD  
11. 8N-4110 [1] BUSHING  
12. 4B-9782 [1] BALL  
13. 7S-3224 [14] BOLT (5/8-11X5.25-IN)  
  2S-5658 [14] WASHER-HARD (17X29X3-MM THK)  
 

#SEBP14070018
 

7N-6550: CYLINDER BLOCK GP

7N-6550 CYLINDER BLOCK GP
PART OF 8N-5286 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 1N-3576@@@@@, 6N-7727 KIT-CYLINDER BLOCK
i00122389 SEBP1407
7N6550 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 456-5581 [18] SEAL-O-RING  
2. 371-5941 [6] LINER-CYLINDER  
  104-5512 ABJ INSERT-LINER SEAT (0.822-MM THK)  
  104-5518 ABJ INSERT-LINER SEAT (1.605-MM THK)  
  104-5527 ABJ INSERT-LINER SEAT (2.71-MM THK)  
  104-5530 ABJ INSERT-LINER SEAT (5.21-MM THK)  
    (REFER TO SEBF8198 FOUND IN SISWEB FOR LINER INSERTS.)
3. 2W-6134 [6] BAND-FILLER  
4. 7S-3224 [14] BOLT (5/8-11X5.25-IN)  
5. 6N-8003 [7] CAP-CRANKSHAFT BEARING  
6. 2S-5658 [14] WASHER-HARD (17X29X3-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   TO REPAIR LIGHT DAMAGE DUE TO EROSION/FRETTING IN THE LINER FLANGE SEATING AREA
 

#SEBP14070019
 

8N-5286: CYLINDER BLOCK GP

8N-5286 CYLINDER BLOCK GP
i00122471 SEBP1407
8N5286 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-6550 Y [1] CYLINDER BLOCK GP  
2. 7M-4046 [4] BUSHING  
3. 8K-1207 [2] DOWEL  
4. 3S-5496 [1] SEAL-O-RING  
5. 8B-6349 [2] DOWEL  
6. 7N-7998 [1] PLATE-BLOCK  
7. 115-7550 [1] GASKET-PLATE  
8. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
9. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
10. 8T-6765 [4] PLUG-PIPE (1/4-18-THD)  
11. 8M-9307 [1] PLUG (ENGINE OIL)  
12. 8T-6762 [3] PLUG-PIPE (1/2-14-THD)  
13. 5B-7652 [2] DOWEL  
14. 8N-4110 [1] BUSHING  
15. 4B-5387 [1] PLUG-CUP  
16. 4B-9782 [1] BALL  
17. 1S-9540 [1] DOWEL  
18. 5S-8462 [1] STUD  
19. 4B-3938 [1] PLUG-CUP  
20. 6F-7062 [1] WASHER (12.7X19.05X1.83-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Connecting Rod And Main Bearings Used
1984/04/11
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service
1991/05/01
Be Sure To Use Correct Cup Plugs On OR2077, OR2554, And OR3258 Remanufactured 3304 And 3306 Short Blocks
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Block
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Piston Cooling Jet
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Liner
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Liner Projection
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Connecting Rod And Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Cylinder Head Assembly & Spacer Plate
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Pack
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Piston Cooling Orifices
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Cylinder Head Assembly And Spacer Plate
3304B & 3306B MARINE ENGINES
Cylinder Liners
3304B & 3306B MARINE ENGINES
Crankshaft Main Bearings
3304B & 3306B MARINE ENGINES
Camshaft Bearings
3304B & 3306B MARINE ENGINES
Piston Cooling Orifices
3304B & 3306B MARINE ENGINES
Service Magazine
Oil Drain Hole Added To Spacer Plate Cylinder Block To Permit Use Of Scroll Fuel System{1201,1221}
1980/01/28
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Caterpillar Parts SIS Catalog 3306 :

CLUTCH AS
1N-7309 CLUTCH AS
CAMSHAFT GP
1N-4406 CAMSHAFT GP
ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL
7W-1395 ENGINE AR
1W-3870 ENGINE AR
1W-3869 ENGINE AR
184-5129 ENGINE AR
179-8211 ENGINE AR
COVER GP-CYLINDER BLOCK
7N-1409 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER HEAD
2P-6530 COVER GP-CYLINDER HEAD
COVER GP-FRONT HOUSING
3N-4923 COVER GP-FRONT HOUSING
COVER GP-VALVE MECHANISM
8N-4745 COVER GP-VALVE MECHANISM
CRANKSHAFT AS
334-8389 CRANKSHAFT AS
CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
CYLINDER BLOCK GP
1N-3576 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7N-6550 CYLINDER BLOCK GP

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.