AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W-3556 TURBOCHARGER GP S/N 84Z644-UP PART OF 2W-1576 TURBOCHARGER GP FIELD REPLACEMENT FOR @@@@@ 2W-7714@@@@@, @@@@@ 2W-7096@@@@@ 3306


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
CONTROL GP-GOVERNOR
PUMP GP-FUEL INJECTION
CONTROL GP-GOVERNOR

MARINE ENGINE 3306 MARINE ENGINE 84Z
 3306 Marine Engine 84Z00001-UP SEBP1407 3306 84Z   (1982)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
2W-1576 TURBOCHARGER GP
TURBOCHARGER GP
2W-1576 TURBOCHARGER GP
TURBOCHARGER GP
2W-3556 TURBOCHARGER GP
TURBOCHARGER GP
2W-6912 TURBOCHARGER GP
TURBOCHARGER GP
2W-7096 TURBOCHARGER GP
TURBOCHARGER GP
2W-7276 TURBOCHARGER GP
 

#SEBP14070220
 

2W-3556: TURBOCHARGER GP

2W-3556 TURBOCHARGER GP
S/N 84Z644-UP
PART OF 2W-1576 TURBOCHARGER GP
FIELD REPLACEMENT FOR @@@@@ 2W-7714@@@@@, @@@@@ 2W-7096@@@@@
i00358767 SEBP1407
2W3556 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3557 [1] HOUSING AS-COMPRESSOR  
2. 3S-5129 [1] CLAMP AS (COMPRESSOR)  
3. 2W-3558 Y [1] CARTRIDGE GP-TURBOCHARGER  
4. 6N-9906 [1] HOUSING AS-TURBINE  
  3B-0645 B [3] PLUG-CUP (31.75MM OD)  
  4N-0932 B [4] PLUG-CUP (57.15MM OD)  
  3P-1896 B [3] PLUG-CUP (34.92MM OD)  
  100-6816 B [4] PLUG-CUP (60.32MM OD)  
5. 1B-5174 [5] PLUG-PIPE  
6. 9N-2038 [1] CLAMP AS-TURBINE  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14070221
 

2W-6912: TURBOCHARGER GP

2W-6912 TURBOCHARGER GP
S/N 84Z1-753
i00360058 SEBP1407
2W6912 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7096 Y [1] TURBOCHARGER GP  
2. 6V-1760 [2] ELBOW-FLARED  
3. 7M-7273 [1] GASKET  
4. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
5. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14070222
 

2W-7096: TURBOCHARGER GP

2W-7096 TURBOCHARGER GP
S/N 84Z1-753
PART OF 2W-6912 TURBOCHARGER GP
FIELD REPLACEMENT ORDER @@@@@ 2W-3556@@@@@
i00360199 SEBP1407
2W7096 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3557 [1] HOUSING AS-COMPRESSOR  
2. 3S-5129 [1] CLAMP AS (COMPRESSOR)  
3. 2W-3558 Y [1] CARTRIDGE GP-TURBOCHARGER  
4. 6N-9906 [1] HOUSING AS-TURBINE  
6. 1B-5174 [5] PLUG-PIPE  
7. 9N-2038 [1] CLAMP AS-TURBINE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14070223
 

2W-7276: TURBOCHARGER GP

2W-7276 TURBOCHARGER GP
PART OF 2W-7468 TURBOCHARGER GP
AN ATTACHMENT
i00360277 SEBP1407
2W7276 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3557 [1] HOUSING AS-COMPRESSOR  
2. 3S-5129 [1] CLAMP AS (COMPRESSOR)  
3. 2W-3558 Y [1] CARTRIDGE GP-TURBOCHARGER  
4. 2W-7275 [1] HOUSING AS-TURBINE (TURBINE)  
6. 1B-5174 [5] PLUG-PIPE  
7. 9N-2038 [1] CLAMP AS-TURBINE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14070224
 

2W-7468: TURBOCHARGER GP

2W-7468 TURBOCHARGER GP
FOR USE WITH @@@@@ 1W-3870@@@@@
AN ATTACHMENT
i00360363 SEBP1407
2W7468 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7276 Y [1] TURBOCHARGER GP  
2. 6V-1760 [2] ELBOW-FLARED  
3. 7M-7273 [1] GASKET  
4. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
5. 5M-6213 C [3] PLUG-PIPE (1/4-18-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14070225
 

2W-7714: TURBOCHARGER GP

2W-7714 TURBOCHARGER GP
S/N 84Z1-643
PART OF 2W-1576 TURBOCHARGER GP
FIELD REPLACEMENT ORDER @@@@@ 2W-3556@@@@@
i00360433 SEBP1407
2W7714 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3557 [1] HOUSING AS-COMPRESSOR  
2. 3S-5129 [1] CLAMP AS (COMPRESSOR)  
3. 2W-3558 Y [1] CARTRIDGE GP-TURBOCHARGER  
4. 6N-9906 [1] HOUSING AS-TURBINE  
6. 1B-5174 [5] PLUG-PIPE  
7. 9N-2038 [1] CLAMP AS-TURBINE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14070226
 

5L-6978: CABLE AS-GOVERNOR CONTROL

5L-6978 CABLE AS-GOVERNOR CONTROL
20 FT LONG
FOR USE WITH @@@@@ 3N-9196@@@@@, @@@@@ 3N-9197@@@@@, 'MT' AND TWIN 'S' REMOTE MOUNTED MECHANICAL GOVERNOR CONTROLS
AN ATTACHMENT
i01662716 SEBP1407
5L6978 CABLE AS-GOVERNOR CONTROL Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP14070227
 

5L-6980: CABLE AS-GOVERNOR CONTROL

5L-6980 CABLE AS-GOVERNOR CONTROL
24 FT LONG
FOR USE WITH @@@@@ 3N-9196@@@@@, @@@@@ 3N-9197@@@@@, 'MT' AND TWIN 'S' REMOTE MOUNTED MECHANICAL GOVERNOR CONTROLS
AN ATTACHMENT
i01662720 SEBP1407
5L6980 CABLE AS-GOVERNOR CONTROL Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP14070228
 

2W-0255: CAMSHAFT AS

2W-0255 CAMSHAFT AS
PART OF 2W-0256 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00122033 SEBP1407
2W0255 CAMSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
2. 7N-7264 [4] WEIGHT-GOVERNOR  
3. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
4. 1S-5440 [4] DOWEL  
5. 4N-9019 [1] DOWEL  
6. 8N-2511 [1] CARRIER-WEIGHT  
7. 2W-0254 [1] CAMSHAFT-FUEL PUMP  
8. 7N-7166 [2] RACE-THRUST BEARING  
9. 7L-3326 [1] BEARING-THRUST  
10. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
 

#SEBP14070229
 

3N-9196: CONTROL AR-GOVERNOR

3N-9196 CONTROL AR-GOVERNOR
MECHANICAL--REMOTE MOUNTED, 'MT' (SINGLE LEVER)
AN ATTACHMENT
i00524943 SEBP1407
  For full view, you need register

Parts for your 3306 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5L-7494 [1] CONTROL AS-LEVER  
  6L-9572 [1] MOUNTING AS  
  3N-9192 Y [1] MOUNTING GP-GOVERNOR CONTROL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Installation Instructions For Turbocharger Bearing Kit
1984/08/08
Remanufactured Turbocharger Groups
1984/12/12
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Remanufactured Turbocharger Groups And Cartridges
1987/08/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
"Off-Size" Bearing Kits Available
1991/10/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Add Chamfer To Cartridge Assembly Bearings To Prevent Oil Leakage
1977/12/14
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbochargers
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbocharger
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Turbocharger (AiResearch T04)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Turbocharger (Schwitzer 3LM)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Turbocharger (AiResearch TW61)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Turbocharger
3304B & 3306B MARINE ENGINES
Turbocharger (AiResearch T04 or TW4)
3304B & 3306B MARINE ENGINES
Turbocharger (AiResearch TW61)
3304B & 3306B MARINE ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Installation Instructions For Turbocharger Bearing Kit{1052,1053}
1984/07/16
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Add Chamfer To Cartridge Assembly Bearings To Prevent Oil Leakage{1052,1053}
1977/11/21
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Remanufactured Turbocharger Groups And Cartridges{1052,1053}
1987/08/10
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3306 :

TURBOCHARGER GP
2W-1576 TURBOCHARGER GP
TURBOCHARGER GP
2W-1576 TURBOCHARGER GP
TURBOCHARGER GP
2W-1576 TURBOCHARGER GP
PIPE GP-EXHAUST
5L-8649 PIPE GP-EXHAUST
PIPE GP-EXHAUST
4L-5801 PIPE GP-EXHAUST
MUFFLER
2W-4072 MUFFLER
MUFFLER
2W-4070 MUFFLER
MANIFOLD GP-EXHAUST
1W-8483 MANIFOLD GP-EXHAUST
TURBOCHARGER GP
2W-6912 TURBOCHARGER GP
TURBOCHARGER GP
2W-7096 TURBOCHARGER GP
TURBOCHARGER GP
2W-7276 TURBOCHARGER GP
TURBOCHARGER GP
2W-7468 TURBOCHARGER GP
TURBOCHARGER GP
2W-7714 TURBOCHARGER GP
CABLE AS-GOVERNOR CONTROL
5L-6978 CABLE AS-GOVERNOR CONTROL
CABLE AS-GOVERNOR CONTROL
5L-6980 CABLE AS-GOVERNOR CONTROL
CAMSHAFT AS
2W-0255 CAMSHAFT AS

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.