AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1P2187 GEAR PUMP GROUP PART OF 1P3254 GEAR PUMP GROUP SHOWN ON PAGE 204. AN ATTACHMENT D7G TRACK-TYPE TRACTOR


HYDRAULIC SYSTEM
PUMP GP
LINES GP-PUMP
LINES GP-BULLDOZER
LINES GP-WINCH
LINES GP-RIPPER

TRACK-TYPE TRACTOR D7G TRACK-TYPE TRACTOR 72W
 D7G LGP TRACTOR / POWER SHIFT / 72W00608-UP (MACHINE) POWERED BY 3306 ENGINE SEBP1412 D7G 72W   (1976)

HYDRAULIC SYSTEM

PUMP GP
PUMP GP-GEAR
1P-3254 PUMP GP-GEAR
CARTRIDGE GP-REAR
3G-7658 CARTRIDGE GP-REAR
PUMP GP-GEAR
1P-2187 PUMP GP-GEAR
PUMP GP-VANE
9J-5058 PUMP GP-VANE
CARTRIDGE GP-FRONT
3G-7655 CARTRIDGE GP-FRONT
 

#SEBP14120320
 

1P-2187: PUMP GP-GEAR

1P2187 GEAR PUMP GROUP
PART OF 1P3254 GEAR PUMP GROUP SHOWN ON PAGE 204. AN ATTACHMENT
c113037 SEBP1412
1P2187 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4191 [1] PLUG  
  3J-1907 [1] SEAL  
2. 1P-2167 [1] MANIFOLD ASSEM.  
3. 2S-7931 [2] BEARING  
4. 1P-9657 [1] BODY ASSEM.  
5. 8M-8489 [4] DOWEL  
6. 1P-2169 [1] COVER ASSEM.  
7. 2S-7931 [2] BEARING  
8. 8M-8489 [2] DOWEL  
9. 7S-3029 [1] SEAL  
10. 1P-9654 [1] GEAR (11 Teeth)  
11. 4S-9002 [4] BOLT  
  8M-3175 [4] WASHER  
12. 1P-9655 [1] GEAR (8 Teeth)  
13. 4M-0189 [2] SEAL  
 

#SEBP14120321
 

9J-5058: PUMP GP-VANE

9J5058 HYDRAULIC PUMP GROUP
PART OF 9G7929,9G7930 & 6P4892 HYDRAULIC CONTROL ARRANGEMENT LISTED
ON PAGES 186 & 187. 3G7655 & 3G7658 CARTRIDGE PARTS ARE SHOWN ON
PAGE 207 & 205. AN ATTACHMENT
c179144 SEBP1412
9J5058 PUMP GP-VANE Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-1657 [1] COVER  
2. 1D-4574 [4] BOLT  
3. 4J-2457 [1] COVER  
4. 3G-7658 RCY [1] CARTRIDGE GROUP (14 gpm)  
    (Separate Illustration)
  1U-0378 J [1] FLEX PLATE KIT (repair-20 vq)  
5. 4M-7652 [1] RING (outer)  
6. 1L-8497 [1] RING (inner)  
7. 6B-1124 [1] BEARING  
8. 4M-7648 [1] WASHER  
9. 5P-0903 C [1] SEAL  
10. 3G-9193 C [1] SEAL  
11. 9J-5104 [1] SHAFT  
12. 1U-3966 C [1] BODY  
13. 3G-7655 RCY [1] CARTRIDGE GROUP (21 gpm)  
    (Separate Illustration)
  1U-0379 J [1] FLEX PLATE KIT (repair-25 vq)  
14. 0T-0319 [4] BOLT  
15. 3G-7242 C [1] PLUG  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
  J   NOT PART OF 9J5058 PUMP GROUP
 

#SEBP14120322
 

3G-7655: CARTRIDGE GP-FRONT

3G7655 CARTRIDGE GROUP-FRONT-79 L/MIN (21 GPM)*R
PART OF 9J5058 HYDRAULIC PUMP GROUP SHOWN ON PAGE 206. AN ATTACHMENT
c402193 SEBP1412
3G7655 CARTRIDGE GP-FRONT Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3078 C [4] SEAL-O-RING  
2. 3G-2192 C [4] RETAINER-SEAL  
3. 9T-5041 C [2] DOWEL  
4. 9T-5047 C [1] PLATE-INLET  
5. 064-7311 C [1] KIT-VANE  
6. 9T-5072 C [1] RING  
7. 6V-1197 [1] SEAL-O-RING  
8. 8J-4351 [1] SEAL-O-RING  
9. 9T-5086 C [1] RING  
10. 9T-5090 C [1] PLATE-OUTLET  
11. 3G-2193 [1] RING-SEAL  
12. 9T-5098 C [2] FLEXPLATE  
13. 064-7310 C [1] ROTOR-PUMP  
14. 9T-5110 C [2] SCREW  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14120323
 

3P-5599: LINES GP-PUMP

3P5599 PUMP LINES GROUP-PART 1
PART OF 9G7929,9G7930 & 6P4892 HYDRAULIC CONTROL ARRANGEMENTS LISTED ON
PAGES 186 & 187. AN ATTACHMENT
c305955 SEBP1412
3P5599 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-2618 [1] CONNECTOR-O-RING  
  1J-9671 [1] SEAL-O-RING  
2. 6P-5353 [1] HOSE AS  
  5P-0734 E HOSE (23.75 IN.)  
3. 5D-8102 [1] COUPLING  
4. 068-0009 [1] FITTING  
5. 6P-5159 [1] HOSE AS  
6. 030-7963 C [1] ELBOW-FLARED  
7. 4J-0522 [1] SEAL  
8. 2R-6806 [1] CONNECTOR  
9. 3J-1907 C [4] SEAL  
10. 8M-0506 [1] CONNECTOR  
11. 8S-4943 [1] HOSE AS  
  5P-0179 E HOSE CM(18.3 IN.)  
12. 3S-8606 [2] SLEEVE  
13. 8S-4055 [1] COUPLING AS  
    (STRAIGHT)
14. 8S-6391 [1] COUPLING AS (90)  
15. 8M-0505 [2] CONNECTOR  
  3K-0360 [2] SEAL-O-RING  
16. 1P-4577 [4] FLANGE-HALF  
17. 5H-4019 [1] COVER  
18. 4J-0520 [3] SEAL  
19. 3P-4832 [1] MANIFOLD  
20. 9S-4191 C [2] PLUG-O-RING  
21. 2P-8421 [2] ADAPTER-O-RING  
  3D-2824 [2] SEAL-O-RING  
22. 0L-1143 [4] BOLT  
23. 5F-3106 [1] SEAL-O-RING  
24. 0S-1589 [2] BOLT  
  5P-8247 C [2] WASHER-HARD  
25. 3B-1915 [8] BOLT  
26. 0L-1352 [3] BOLT  
27. 1P-4584 [2] FLANGE-HALF  
28. 0S-1587 [4] BOLT  
  5P-8245 C [4] WASHER  
29. 5H-8848 C [1] SEAL-O-RING  
30. 3P-4833 [1] HOSE AS  
  5P-0181 E HOSE (36.42 IN.)  
31. 7S-0574 [1] STEM AS-COLLET (LARGE)  
32. 3S-8501 [1] STEM AS-COLLET (SMALL)  
33. 3S-7252 [2] SLEEVE  
34. 3P-4828 C HOSE AS (52 IN.)  
35. 2H-6338 C [1] SEAL-O-RING  
36. 5M-2894 [15] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#SEBP14120324
 

3P-5599: LINES GP-PUMP

3P5599 PUMP LINES GROUP-PART 2
PART OF 9G7929,9G7930 & 6P4892 HYDRAULIC CONTROL ARRANGEMENTS LISTED
ON PAGES 186 & 187. 9J5169 VALVE PARTS ARE SHOWN ON PAGE 200
AN ATTACHMENT
c306078 SEBP1412
3P5599 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-6806 C [1] CONNECTOR  
2. 3J-1907 C [3] SEAL  
3. 9S-4183 [1] PLUG  
4. 3D-2824 [4] SEAL-O-RING  
5. 030-7947 C [1] ELBOW  
6. 4J-0520 [1] SEAL  
7. 8P-5941 C [1] ELBOW  
8. 4J-8997 [1] SEAL  
9. 0L-2070 C [4] BOLT  
10. 5M-2894 C [6] WASHER  
11. 0T-0055 [2] BOLT  
  1D-4717 [2] NUT  
12. 9J-5169 Y [1] VALVE GP-PRESSURE CONTROL  
    (PRESSURE CONTROL)
13. 030-7944 [1] ELBOW  
14. 030-7942 [1] ELBOW  
15. 2R-6276 [2] CONNECTOR  
16. 3P-4836 [1] HOSE AS  
  5P-0180 E HOSE (25.39 IN.)  
17. 8S-3759 [2] COUPLING AS  
18. 3S-7166 [2] SLEEVE  
19. 9G-8827 C [1] HOSE AS  
  9S-0247 CE HOSE (15.75 IN.)  
20. 5S-6102 C [1] STEM AS-COLLET (90)  
21. 8S-3759 [1] COUPLING AS  
    (STRAIGHT)
22. 3S-7166 [2] SLEEVE  
23. 3P-6146 [1] HOSE AS  
  5P-0734 E HOSE (37.6 IN.)  
24. 068-0599 [1] FITTING  
25. 5D-8102 [1] COUPLING  
26. 5P-2618 [1] CONNECTOR-O-RING  
  1J-9671 [1] SEAL-O-RING  
27. 8P-5927 C [1] HOSE AS  
  5P-0178 E HOSE (16.14 IN.)  
28. 4S-5414 [2] SLEEVE  
29. 8S-6417 [2] COUPLING AS  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP14120325
 

6P-4291: LINES GP-BULLDOZER

6P4291 BULLDOZER LINES GROUP-PART 1
PART OF 9G7929,9G7930 & 6P4892 HYDRAULIC CONTROL ARRANGEMENTS LISTED ON
PAGES 186 & 187. AN ATTACHMENT
c178528 SEBP1412
6P4291 LINES GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [2] BOLT  
2. 3B-4506 [3] LOCKWASHER  
3. 3P-4826 [1] BRACKET ASSEM.  
    (Includes)
4. 9F-2978 [1] NUT  
5. 0S-1594 [1] BOLT  
6. 4B-4278 C [1] WASHER  
7. 2P-6471 [4] CLIP  
8. 2P-6470 [4] CLIP  
9. 6P-3630 [2] HOSE ASSEM.  
    (Each Includes)
  8S-9355 CH HOSE 110.63 in.(281 cm)  
10. 7S-0574 [1] STEM ASSEM. (60 degrees)  
11. 3S-7252 [2] SLEEVE  
12. 3S-8498 [1] STEM ASSEM. (30 degrees)  
13. 3H-5368 [8] BOLT  
  5P-8244 C [8] WASHER  
14. 1P-4578 [4] FLANGE  
15. 4J-0522 [2] SEAL  
16. 0S-1621 [1] BOLT  
17. 3B-4508 C [3] LOCKWASHER  
18. 4B-4280 [2] WASHER  
19. 9G-8609 C [1] PLATE ASSEM.  
20. 0S-1585 C [1] BOLT  
21. 6N-1709 C [1] SPACER  
22. 5M-2894 C [8] WASHER  
23. 3B-1915 [8] BOLT  
24. 1P-4577 [4] FLANGE  
25. 4J-0520 [2] SEAL  
26. 0S-1595 [1] BOLT  
27. 1D-4719 [1] NUT  
28. 2P-6472 [1] BRACKET  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#SEBP14120326
 

6P-4291: LINES GP-BULLDOZER

6P4291 BULLDOZER LINES GROUP-PART 2
PART OF 9G7929,9G7930 & 6P4892 HYDRAULIC CONTROL ARRANGEMENTS LISTED
ON PAGES 186 & 187. AN ATTACHMENT
c178728 SEBP1412
6P4291 LINES GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4576 [16] FLANGE  
2. 3B-1915 [12] BOLT  
3. 5M-2894 [32] WASHER  
4. 6P-3635 [1] PLATE  
5. 6P-3632 [1] BRACKET ASSEM.  
    (Includes)
6. 1F-0748 [1] NUT (weld)  
7. 8S-0023 [2] CLIP (slot)  
  8S-0024 [2] CLIP (tab)  
8. 1A-5822 [1] BOLT  
  2J-1020 [1] SPACER  
9. 3B-4508 [5] LOCKWASHER  
10. 4B-4280 [1] WASHER  
11. 6P-3631 [2] HOSE ASSEM.  
    (Each Includes)
  9S-0247 CH HOSE 49.53 in.(125.8 cm)  
  3S-8361 [1] STEM ASSEM. (60 degrees)  
12. 3S-7166 [2] SLEEVE  
13. 3S-8359 [1] STEM ASSEM. (30 degrees)  
14. 4J-5267 [6] SEAL  
15. 7B-3235 [2] BOLT  
16. 6P-3634 [1] BLOCK  
17. 0L-1352 [4] BOLT  
18. 0L-1143 [4] BOLT  
  1D-4717 [8] NUT  
19. 1A-5964 [4] BOLT  
20. 6P-3636 [2] SPACER  
21. 0S-1587 [2] BOLT  
22. 1D-4719 [2] NUT  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#SEBP14120327
 

6P-4292: LINES GP-BULLDOZER

6P4292 BULLDOZER LINES GROUP
PART OF 9J9902 BULLDOZER ARRANGEMENT LISTED ON PAGE 229. AN ATTACHMENT
c306113 SEBP1412
6P4292 LINES GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6P-3662 [1] GUARD AS  
2. 6P-3665 [1] GUARD AS  
3. 6P-3637 [4] HOSE AS  
4. 4J-5267 [8] SEAL  
5. 0S-1594 [4] BOLT  
6. 4B-5271 [8] WASHER  
7. 3B-4506 [14] LOCKWASHER  
8. 0S-1588 [10] BOLT  
9. 1D-4717 [6] NUT  
10. 6P-5347 [1] GUARD AS  
11. 6P-5348 [1] GUARD AS  
12. 6H-1717 [4] BOLT  
13. 4B-4280 [4] WASHER  
14. 3B-4508 [4] LOCKWASHER  
 

#SEBP14120328
 

3P-5605: LINES GP-WINCH

3P5605 WINCH LINES GROUP
PART OF 3P6842 WINCH ARRANGEMENT LISTED ON PAGE 234. AN ATTACHMENT
c155270 SEBP1412
3P5605 LINES GP-WINCH Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4579 [2] FLANGE  
2. 4J-0524 [1] SEAL  
3. 0S-1585 [4] BOLT  
4. 4B-4280 C [5] WASHER  
5. 0L-1351 [1] BOLT  
  3B-4506 C [1] LOCKWASHER  
6. 1D-4717 [1] NUT  
7. 0S-1595 [1] BOLT  
  3B-4508 [1] LOCKWASHER  
8. 2P-6435 C [1] HOSE ASSEM. 67.12 in.)  
9. 3P-2404 [1] CLIP  
10. 1B-2886 [1] BOLT  
  6S-4183 [1] SPACER  
11. 2R-6276 [2] CONNECTOR  
12. 3D-2824 [1] SEAL  
13. 2S-4078 [1] SEAL  
14. 031-8759 [1] CONNECTOR  
15. 2P-6434 C [1] HOSE ASSEM.  
    (Includes)
  5P-0182 H HOSE 155 cm(61.02 in.)  
  5S-3779 [1] STEM ASSEM. (straight)  
16. 3S-7116 [2] SLEEVE  
17. 2P-0988 [1] COUPLING ASSEM.  
18. 7K-1181 [3] STRAP  
19. 7L-6326 C [1] CLIP  
20. 3P-7108 [1] BRACKET  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#SEBP14120329
 

3P-5595: LINES GP-RIPPER

3P5595 RIPPER LINES GROUP-PART 1 OF 2-TYPE 1
AN ATTACHMENT
c305993 SEBP1412
3P5595 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6P-3712 [1] HOSE AS  
  5P-0178 G HOSE IN.(159.80 CM)  
2. 4S-5414 [2] SLEEVE  
3. 8S-6417 [1] COUPLING AS  
    (STRAIGHT)
4. 8S-6392 [1] COUPLING AS (90)  
5. 9P-2895 C [1] HOSE AS  
  8S-9355 G HOSE IN.(113.1 CM)  
6. 3S-7252 [2] SLEEVE  
7. 2P-4813 [2] STEM AS-COLLET  
8. 4J-0522 [2] SEAL  
9. 9S-1366 [1] BOLT  
  5P-8245 C [1] WASHER  
10. 2H-9233 [1] SPACER  
11. 6K-6167 [1] CLIP (LARGE)  
  6K-6164 C [1] CLIP (SMALL)  
12. 3P-4026 C [1] HOSE AS  
  2P-5943 CG HOSE IN.(140.5 CM)  
13. 8S-6393 [2] COUPLING AS (LONG)  
14. 4S-5414 [2] SLEEVE  
15. 5P-8244 C [8] WASHER  
16. 2R-6806 [5] CONNECTOR  
17. 3J-1907 [6] SEAL  
18. 030-7947 [1] ELBOW  
19. 3P-6023 [1] HOSE AS  
  2P-5943 CG HOSE IN.(187.70 CM)  
20. 8S-6393 [2] COUPLING AS  
21. 4S-5414 [2] SLEEVE  
22. 0T-0768 C [4] BOLT  
23. 3H-5368 [4] BOLT  
24. 1P-4578 [2] FLANGE  
25. 6P-3713 [1] TUBE AS  
  1P-3704 [1] SEAL-RECTANGULAR  
26. 5R-0940 C [1] CLIP (SLOT)  
  5R-0939 C [1] CLIP (TAB)  
27. 0S-0509 C [1] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
 

Information:

Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog D7G :

CARTRIDGE GP-REAR
3G-7658 CARTRIDGE GP-REAR
VALVE GP-PILOT
8J-7499 VALVE GP-PILOT
PUMP GP-GEAR
1P-3254 PUMP GP-GEAR
VALVE GP
8J-7488 VALVE GP
VALVE GP-PILOT
8J-7494 VALVE GP-PILOT
VALVE GP
8J-7489 VALVE GP
VALVE GP
3G-1772 VALVE GP
VALVE GP-CONTROL
3G-1773 VALVE GP-CONTROL
PUMP GP-VANE
9J-5058 PUMP GP-VANE
CARTRIDGE GP-FRONT
3G-7655 CARTRIDGE GP-FRONT
LINES GP-PUMP
3P-5599 LINES GP-PUMP
3P-5599 LINES GP-PUMP
LINES GP-BULLDOZER
6P-4291 LINES GP-BULLDOZER
6P-4291 LINES GP-BULLDOZER
LINES GP-BULLDOZER
6P-4292 LINES GP-BULLDOZER
LINES GP-WINCH
3P-5605 LINES GP-WINCH

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.