AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3N846 LIFTING EYE GROUP D398 INDUSTRIAL ENGINE


BASIC ENGINE
LIFTING GP-ENGINE
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
MANIFOLD GP-EXHAUST
BASIC ENGINE
CYLINDER HEAD GP
CYLINDER BLOCK GP

INDUSTRIAL ENGINE D398 INDUSTRIAL ENGINE 66B
 D398B ENGINE - ENGINES IN GENERAL ELECTRIC LOCOMOTIVES FOR T 66B00001-UP SEBP1422 D398 66B   (1961)

BASIC ENGINE

LIFTING GP-ENGINE
LIFTING GP
3N-0846 LIFTING GP
 

#SEBP14220010
 

3N-0846: LIFTING GP

3N846 LIFTING EYE GROUP
c224437 SEBP1422
3N0846 LIFTING GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-4098 C [1] SUPPORT ASSEM.  
2. 5N-4103 C [1] EYE ASSEM.  
3. 8L-5869 [1] EYE ASSEM.  
4. 6L-8825 [1] SUPPORT ASSEM. (R.H.)  
5. 0L-1169 [6] BOLT  
6. 2S-7593 C [2] WASHER  
7. 2S-0736 [4] WASHER  
8. 6L-8826 [1] SUPPORT ASSEM. (L.H.)  
9. 7H-7954 C [8] BOLT  
  9M-1367 C [8] LOCK  
  1D-4717 C [8] NUT  
10. 5L-9855 C [8] PLATE  
  5L-9854 C [4] TRUNNION  
11. 1A-1460 C [6] BOLT  
  5P-8245 [6] WASHER  
  C   INDICATES CHANGE
 

#SEBP14220011
 

6L-2493: TURBOCHARGER GP

6L2493 TURBOCHARGER GROUP--Rear View
c176479 SEBP1422
6L2493 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 6L-2960 [4] RING  
3. 5L-9738 [2] COUPLING  
4. 6L-2961 [4] RING  
7. 2N-2765 [8] BOLT  
  2N-2766 [8] NUT  
8. 3N-6844 [1] TUBE ASSEM.  
9. 1S-4295 [2] GASKET  
10. 3N-3368 [1] PIPE (exhaust)  
11. [2] PLUG (drain)  
12. 0S-1587 [4] BOLT  
  1B-5357 [4] NUT  
13. 3N-6846 [1] TUBE ASSEM.  
14. 061-9463 [4] CONNECTOR  
15. 3R-2704 [2] UNION  
18. 1S-4810 [2] GASKET  
19. 0S-1594 [4] BOLT  
20. 7L-7001 [1] TUBE ASSEM.  
21. 9H-6067 [2] SEAL  
22. 9L-9217 [1] TUBE ASSEM.  
23. 7L-7160 [2] HOSE  
24. 4J-8536 [2] CLAMP  
25. 5P-3860 [2] CLAMP  
26. 3N-6843 [1] TUBE ASSEM.  
27. 3N-6845 [1] TUBE ASSEM.  
28. 4D-9646 [2] PLATE  
  9S-7501 [2] SPACER  
29. 3B-4506 [6] LOCKWASHER  
30. 4B-0418 [2] CLIP  
31. 0S-0509 [2] BOLT  
  1D-4717 [2] NUT  
 

#SEBP14220012
 

1P-1251: TURBOCHARGER GP

1P1251 TURBOCHARGER GROUP--2 Required
Part of 5N5638 Locomotive Fuel Arrangement listed on Page 50
c136008 SEBP1422
1P1251 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2S-1304 H [1] CLAMP  
  7M-9918 H [1] NUT  
  9M-9545 [1] SEAL  
  1S-7114 [8] BOLT  
  9M-9939 [4] PLATE (Lock)  
  2S-1309 [1] HOUSING  
  9S-1517 H [1] HOUSING (Turbine)  
  1P-1252 H [1] NOZZLE  
  9M-9938 [1] PLATE  
  7S-7759 R [1] SHAFT AND WHEEL ASSEM.  
  4M-6990 [1] RING  
  4S-9248 [2] RING  
  1S-3887 [1] WASHER  
  [1] BEARING (Plain)  
    (Part of 3S5854 Bearing Group)
  2S-1507 [1] PLATE (Name)  
  8H-3710 [1] SCREW  
    (Not Shown)
  1P-2428 R [1] CARTRIDGE ASSEM.  
    (Consists of All Parts Except Those Marked H)
  8S-4049 H [1] COVER (Compressor)  
  7M-7611 [3] RING  
  3S-5854 [1] BEARING GROUP  
  [1] BEARING (Grooved)  
    (Part of 3S5854 Bearing Group)
  8H-3710 H [2] SCREW  
  7M-9920 H [1] PLATE (Name)  
  2S-1186 [1] BEARING  
  7M-9910 [3] BOLT  
  7M-9919 [3] PLATE (Lock)  
  2S-1310 [1] SPACER  
  7M-9908 [1] SLEEVE  
  4M-8012 [1] NUT  
  8M-7167 [1] SHIM (.003" Thick)  
  8M-7168 [1] SHIM (.005" Thick)  
  8M-7169 [1] SHIM (.010" Thick)  
  4M-8013 [2] RING  
  9M-9932 [1] WHEEL  
  7M-9923 [1] SPACER  
  2S-1185 [2] RING  
  2S-1307 [1] RING  
  2S-1305 [1] INSERT  
  3S-1427 [1] SEAL  
  2S-1308 [1] DEFLECTOR  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14220013
 

8L-3421: VALVE GP-TURBO LUBRICATION

8L3421 TURBOCHARGER LUBRICATION VALVE GROUP
c234510 SEBP1422
8L3421 VALVE GP-TURBO LUBRICATION Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1591 [4] BOLT  
2. 3B-4506 [8] LOCKWASHER  
3. 1S-6595 [2] GASKET  
4. 7M-6856 [1] BODY AS-VALVE  
5. 5M-6213 [3] PLUG  
6. 6K-8079 C [3] CONNECTOR-FLARED  
7. 5N-8593 C [1] TUBE AS  
8. 4B-9302 [1] CLIP  
9. 1D-4717 [6] NUT  
10. 4B-4278 [2] WASHER  
11. 3N-2378 [1] BRACKET  
12. 0S-1571 [1] BOLT  
  5K-1928 [1] BOSS  
13. 2N-6459 [1] TUBE AS-OIL SUPPLY  
14. 3J-5390 [1] PLUG  
15. 5N-3960 [1] TUBE AS (USE WITH V-8)  
  5N-3961 [1] TUBE AS (USE WITH V-12)  
16. 5B-1345 [1] CLIP  
17. 6F-6405 [1] SPACER  
18. 9S-7694 [1] CONNECTOR-FLARED  
19. 8L-9728 [1] ADAPTER-OIL LINE  
20. 2N-1587 [1] GASKET  
21. 1B-7182 [3] BOLT  
  3B-4505 [3] LOCKWASHER  
22. 7M-6842 [1] PLUNGER-VALVE  
23. 7M-6124 [1] SPRING  
24. 7M-6844 [1] GASKET  
25. 8L-3419 [1] COVER-LUBRICATION VALVE  
26. 9F-8999 [4] BOLT  
27. 5K-9243 [1] ELBOW-FLARED  
28. 4B-8756 [2] NUT-FLARED  
29. 5P-1198 E TUBE 52.98CM(20.86IN)  
30. 6L-3616 [1] CONNECTOR-FLARED  
31. 3N-3320 [1] TUBE AS-SUPPLY  
32. 3N-1442 [1] ADAPTER-VALVE  
  7M-6843 [1] GASKET  
33. 0S-1594 [2] BOLT  
34. 2H-7551 [1] HOSE AS 30.5CM(12.01IN)  
35. 4S-5718 [1] CLIP  
36. 1A-2029 [1] BOLT  
37. 9M-6522 C [1] CONNECTOR-FLARED  
38. 9L-5254 C [1] ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#SEBP14220014
 

3N-1711: MANIFOLD GP-WATER SHIELDED

3N1711 WATER SHIELDED MANIFOLD GROUP--Top View
c161632 SEBP1422
3N1711 MANIFOLD GP-WATER SHIELDED Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-8055 [10] BELLOWS  
2. 7L-0587 [2] TUBE ASSEM.  
3. 2N-6319 [24] BOLT  
  2N-2766 [24] NUT  
4. 1N-7480 [2] MANIFOLD (L.H.)  
  1N-5943 [2] MANIFOLD (R.H.)  
5. 2N-6216 [24] CLAMP ASSEM.  
6. 7L-8240 [2] BELLOWS  
7. 6L-8881 [8] TUBE  
8. 1N-7479 [1] MANIFOLD (L.H.)  
  1N-5944 [1] MANIFOLD (R.H.)  
9. 6L-8741 [24] PLUG  
10. 5M-6213 [2] PLUG  
11. 4L-6200 [2] HOUSING  
12. 0S-1588 [24] BOLT  
13. 5M-2894 [24] WASHER  
14. 0S-1587 [34] BOLT  
  2M-0849 [34] WASHER  
15. 1N-7478 [1] MANIFOLD (L.H.)  
  1N-5942 [1] MANIFOLD (R.H.)  
16. 8M-2296 [2] NUT  
17. 4B-4278 [4] WASHER  
18. 1N-5941 [2] MANIFOLD  
19. 4L-6193 [2] MANIFOLD  
20. 4L-8097 [12] GASKET  
22. 4L-3378 [2] COVER  
23. 4L-7890 [4] GASKET  
24. 3H-6622 [2] BOLT  
 

#SEBP14220015
 

5N-8320: CYLINDER HEAD GP

5N8320 CYLINDER HEAD GROUP
Part of 3N2681 Cylinder Head and Valve Mechanism Group shown on Page 17
c238059 SEBP1422
5N8320 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-1414 [4] SPACER  
2. 7N-7639 [4] ROTATOR-VALVE  
3. 2A-4429 [8] LOCK-RETAINER  
4. 2N-9297 [2] RETAINER-VALVE SPRING (EXHAUST)  
5. 9M-5350 [4] SPRING (OUTER)  
6. 9M-5349 [4] SPRING (INNER)  
7. 5N-8319 R [1] CYLINDER HEAD AS  
8. 2N-9299 [2] GUIDE-VALVE (EXHAUST)  
  2N-9298 [2] GUIDE-VALVE (INTAKE)  
9. 8M-4014 [2] INSERT-SEAT EXHAUST  
  5S-1757 [2] INSERT (INTAKE)  
10. 5H-7071 [8] DIRECTOR-WATER  
11. 3B-0645 [8] PLUG-CUP  
12. 1W-1822 [2] VALVE-EXHAUST  
  1W-8606 [2] VALVE-INLET (INTAKE)  
13. 1W-3062 [2] RETAINER AS (INTAKE)  
    (EACH INCLUDES)
  8N-7780 [1] SHIELD-OIL  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14220016
 

3N-2681: MECHANISM GP-CYL HEAD & VALVE

3N2681 CYLINDER HEAD AND VALVE MECHANISM GROUP--Part 1 of 2
c179607 SEBP1422
3N2681 MECHANISM GP-CYL HEAD & VALVE Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6716 [36] WASHER  
  1B-9917 [12] SPRING (Short)  
  6F-5034 [6] SPRING (Long)  
2. 3B-4621 [12] COTTER PIN  
3. 0L-1351 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
4. 6H-3217 [6] SHAFT ASSEM.  
5. 4F-4585 [2] PLUG  
6. 0S-1608 [2] BOLT  
7. 8M-8509 [1] LOCK  
8. 2N-3553 [7] SEAL  
9. 8S-9089 [24] BOLT  
  3F-4550 [12] LOCK  
10. 1B-4204 [24] NUT  
11. 1A-0744 [24] SCREW  
12. 2N-3227 [6] BRACKET  
13. 5L-5486 [24] LIFTER ASSEM.  
14. 3N-1598 [1] ELBOW ASSEM.  
15. 5M-4987 [2] DOWEL  
16. 4L-7820 [24] ROD ASSEM.  
17. 1P-8372 [12] GASKET KIT  
18. 7B-2420 [36] FERRULE  
  6L-7814 [36] SEAL  
19. 7S-5787 [12] CHAMBER ASSEM.  
20. 6L-7816 [12] SEAL  
21. 2N-3598 [6] COVER  
22. 4H-9811 [12] ARM ASSEM. (Exhaust)  
23. 9F-8254 [1] SOCKET  
24. 3F-7445 [1] BUSHING  
25. 4L-3855 [12] ARM ASSEM. (Intake)  
26. 9F-8254 [1] SOCKET  
27. 3F-7445 [1] BUSHING  
 

#SEBP14220017
 

3N-2681: MECHANISM GP-CYL HEAD & VALVE

3N2681 CYLINDER HEAD AND VALVE MECHANISM GROUP--Part 2 of 2
5N8320 Cylinder Head parts are shown on Page 15
c303544 SEBP1422
3N2681 MECHANISM GP-CYL HEAD & VALVE Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-0945 [6] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
2. 2N-3597 C [6] SEAL  
3. 4L-3803 [12] BRACKET  
4. 4L-8188 [12] STUD  
5. 1B-4205 [24] NUT  
6. 1F-3278 [6] FITTING  
  1F-1344 [1] NUT  
7. 4L-7892 [6] TUBE  
8. 1D-4623 C [96] BOLT  
  5H-1504 [96] WASHER  
9. 5N-8882 YC [6] HEAD GROUP  
    (Separate Illustration)
10. 3N-3220 [6] GASKET (copper)  
  6L-4497 [6] GASKET (plain)  
11. 9F-7707 [24] RING  
12. 8F-8858 [24] BUTTON  
13. 6L-7813 [48] SEAL  
14. 6B-6224 [48] FERRULE  
15. 8F-4994 [12] SEAL  
16. 3F-9780 [12] WASHER  
17. 4L-8189 [12] STUD  
  5B-2383 [12] NUT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14220018
 

3N-2678: CYLINDER BLOCK & COVERS GP

3N2678 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 1 of 2
c303151 SEBP1422
3N2678 CYLINDER BLOCK & COVERS GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1A-2223 [24] DOWEL  
    (PART OF 5N8685 AND 5N8682 ASSEM.)
  9S-1366 [2] BOLT  
  3B-0551 C [1] PLUG  
  5L-2894 [7] BEARING  
    (PART OF 5N8685 AND 5N8682 ASSEM.)
  5F-9303 [2] COVER  
  1F-3131 [2] GASKET  
  1A-0168 [6] BOLT  
  3B-4508 [8] LOCKWASHER  
  9M-7269 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  5N-3275 [1] GASKET  
  0L-1351 [4] BOLT  
  3B-4506 [8] LOCKWASHER  
  0L-2061 [2] DOWEL (875 long)  
  2B-2994 [2] DOWEL (150" long)  
    (PARTS OF 5N8685 AND 5N8682 ASSEM.)
  7F-7669 [1] GASKET  
  7F-7670 [1] COVER  
  0L-1351 [4] BOLT  
  4L-4653 [2] PLATE  
  1A-8537 [8] BOLT  
  3B-4510 [14] LOCKWASHER  
  8S-9092 [6] BOLT  
  2N-7224 C [2] CAP  
  1A-9759 [4] DOWEL  
    (PARTS OF 5N8685 AND 5N8682 ASSEM.)
  2N-5120 [14] STUD  
  3S-1356 [14] NUT  
    (PARTS OF 5N8685 AND 5N8682 ASSEM.)
  2A-3348 [1] DOWEL  
  6B-6863 [6] DOWEL  
    (PARTS OF 5N8685 AND 5N8682 ASSEM.)
  5N-8685 C [1] BLOCK ASSEM.  
    (FOR USE WITH COMPRESSION RELEASE)
    -OR-
  5N-8682 C [1] BLOCK ASSEM.  
    (FOR USE WITHOUT COMPRESSION RELEASE)
  2N-7194 [5] CAP  
    (PART OF 5N8685 AND 5N8682 ASSEM.)
  5H-4279 [4] PLUG  
  1H-8645 [2] SCREW  
  2A-3278 [2] GASKET  
    (PART OF 5N8685 ASSEM.)
  4L-7586 [1] GASKET  
  4L-3395 [2] DOWEL  
    (PART OF 5N8685 AND 5N8682 ASSEM.)
  C   INDICATES CHANGE
 

#SEBP14220019
 

3N-2678: CYLINDER BLOCK & COVERS GP

3N2678 CYLINDER BLOCK AND COVERS GROUP--Front View--Part 2 of 2
c303152 SEBP1422
3N2678 CYLINDER BLOCK & COVERS GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1A-1135 [4] BOLT  
  2A-4462 [2] LOCK  
  8N-4708 [12] BAND  
  8L-4857 [6] COVER  
  1F-4419 [6] GASKET  
  0S-0509 [66] BOLT (.75" long)  
  3B-4506 [66] LOCKWASHER  
  6L-7815 [36] SEAL  
  8N-9174 [12] LINER  
  1A-9759 [8] DOWEL  
  2N-4518 [1] PLATE ASSEM.  
  2N-4516 [1] ADAPTER  
    (Part of 2N4518 Assem.)
  8F-8145 [1] FLANGE  
  1F-3131 [1] GASKET  
  1B-5174 [1] PLUG  
  0S-1588 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  1F-4418 [6] COVER  
  1F-9223 [6] GASKET  
  5F-0304 [1] PLUG (drain)  
  5B-8932 [1] GASKET  
  0S-0509 C [95] BOLT  
  3B-4506 C [95] LOCKWASHER  
    (Use as Required)
  6L-2787 [1] HOUSING  
    (FLYWHEEL)
  C   INDICATES CHANGE
 

Information:

Caterpillar Parts SIS Catalog D398 :

BREATHER GP
3N-0953 BREATHER GP
CONNECTIONS GP-AFTERCOOLER
8L-5025 CONNECTIONS GP-AFTERCOOLER
LINES GP-DRAIN
3N-6896 LINES GP-DRAIN
AFTERCOOLER GP-WATER
3N-6884 AFTERCOOLER GP-WATER
GAUGE GP-AIR CLEANER
2N-3324 GAUGE GP-AIR CLEANER
AIR CLEANER GP
5N-7104 AIR CLEANER GP
PUMP GP-WATER
4L-8800 PUMP GP-WATER
LINES GP-WATER
3N-6891 LINES GP-WATER
TURBOCHARGER GP
6L-2493 TURBOCHARGER GP
TURBOCHARGER GP
1P-1251 TURBOCHARGER GP
VALVE GP-TURBO LUBRICATION
8L-3421 VALVE GP-TURBO LUBRICATION
MANIFOLD GP-WATER SHIELDED
3N-1711 MANIFOLD GP-WATER SHIELDED
CYLINDER HEAD GP
5N-8320 CYLINDER HEAD GP
MECHANISM GP-CYL HEAD & VALVE
3N-2681 MECHANISM GP-CYL HEAD & VALVE
MECHANISM GP-CYL HEAD & VALVE
3N-2681 MECHANISM GP-CYL HEAD & VALVE
CYLINDER BLOCK & COVERS GP
3N-2678 CYLINDER BLOCK & COVERS GP

Truck sale:

 
95,000 
Caterpillar D398, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Caterpillar D398, Construction
95,000 
Caterpillar D398, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
CAT D398
USD $18,000 
CAT D398

Contractor Sales
Pocatello, Idaho
 
$95,000 USD 
CATERPILLAR D398 1978
- INDUSTRIAL
LOUISIANA CAT POWER SYSTEMS
5415 E. Broad St. - Lake Charles - Lou
CATERPILLAR D398 1972
$30,000 USD 
CATERPILLAR D398 1972
- STATIONARY GENERATOR SETS
HOLT OF CALIFORNIA - POWER SYSTEMS
- - United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.