AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4L1134 CRANKSHAFT GROUP D398 INDUSTRIAL ENGINE


BASIC ENGINE
CRANKSHAFT GP
DAMPER GP
CAMSHAFT GP
SHAFT GP-STUB
HOUSING GP-FLYWHEEL
PISTON & ROD GP
CRANKSHAFT GP
DRIVE GP-ACCESSORY
MISCELLANEOUS INFORMATION

INDUSTRIAL ENGINE D398 INDUSTRIAL ENGINE 66B
 D398B ENGINE - ENGINES IN GENERAL ELECTRIC LOCOMOTIVES FOR T 66B00001-UP SEBP1422 D398 66B   (1961)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT GP
4L-1134 CRANKSHAFT GP
CRANKSHAFT BEARING REPLACEMENT
CRANKSHAFT BEARING REPLACEMENT
 

#SEBP14220020
 

4L-1134: CRANKSHAFT GP

4L1134 CRANKSHAFT GROUP
c177651 SEBP1422
4L1134 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1594 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
  3N-9160 C [1] RING  
  3N-7326 C [1] THROWER  
  8N-7764 C [7] BEARING (STANDARD)  
  8N-7765 AB BEARING-MAIN (0.63-U.S.)  
  8N-7766 AB BEARING-MAIN (1.27-U.S.)  
  8N-7767 AB BEARING-MAIN (0.63-O.S.)  
  8N-7768 AB BEARING-MAIN (0.63-U.S.-0.63-O.S.)  
  3N-3234 [2] RING  
  5L-2093 [1] GASKET  
  8L-3972 [1] BAFFLE  
  3N-3002 RC [1] CRANKSHAFT ASSEM.  
  5L-2093 [1] GASKET  
  5P-3476 [6] BOLT  
    (Part of 3N3002 Assem.)
  8L-3972 [1] BAFFLE  
  3N-7327 C [1] THROWER  
  3N-9160 C [1] RING  
  0S-1594 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14220021
 

3N-6890: DAMPER GP

3N6890 DAMPER GROUP
SEBP14220021 SEBP1422
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3B-4508 [10] LOCKWASHER  
  3H-7654 [10] WASHER  
  0S-1587 [10] BOLT  
  2P-1793 [1] DAMPER ASSEMBLY  
  3N-6612 [1] ADAPTER  
  0T-0603 [10] BOLT  
  4M-6953 [10] WASHER  
 

#SEBP14220022
 

4L-1131: CAMSHAFT GP

4L1131 CAMSHAFT GROUP
c181976 SEBP1422
4L1131 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-3777 [1] GEAR (96 TEETH)  
  0L-1351 [4] BOLT  
  4L-6182 [2] LOCK  
  1B-8741 [1] KEY  
  0S-1585 [2] BOLT  
  4L-6184 [1] LOCK  
  5L-2101 [1] PLATE  
  6H-1717 [8] BOLT  
  4L-6183 [4] LOCK  
  8B-1312 [1] PIN  
    (PART OF GEAR ASSEM. 4L6753)
  4L-6753 [1] GEAR ASSEM. (80 TEETH)  
  6L-2195 [1] WASHER ASSEM.  
  1W-1854 C [1] CAMSHAFT  
  C   INDICATES CHANGE
 

#SEBP14220023
 

5N-5123: SHAFT GP-STUB

5N5123 STUB SHAFT GROUP--Front Power Take-Off
SEBP14220023 SEBP1422
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5N-5202 [1] STUB SHAFT  
  0L-1178 [10] BOLT  
  5P-8248 [10] WASHER  
  1A-1599 [1] KEY  
 

#SEBP14220024
 

3N-6886: FLYWHEEL HOUSING GROUP

3N6886 FLYWHEEL HOUSING GROUP
SEBP14220024 SEBP1422
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1592 [3] BOLT  
  3B-4510 [3] LOCKWASHER  
  5B-7852 [1] COVER  
  5L-9672 [1] HOUSING  
  0S-1620 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  5L-5637 [1] POINTER  
  5L-5638 [1] COVER  
  1A-2029 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
 

#SEBP14220025
 

6L-2868: PISTON & ROD GP

6L2868 CONNECTING ROD AND PISTON GROUP--12 Required
Serial No. 66B6186-Up
c228245 SEBP1422
6L2868 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-5499 C [1] PISTON ASSEM.  
    (Includes)
2. 9S-7507 [1] RING (top)  
3. 3S-4059 [1] RING (intermediate)  
4. 5M-5487 [1] RING (oil)  
5. 1P-0009 R [1] ROD ASSEM.  
    (Includes)
6. 1P-1758 [2] BOLT  
7. 8N-2275 C [1] BEARING  
8. 8N-7769 C [1] BEARING (standard)  
  6N-8317 [1] BEARING .635 mm(.025 in.) U.S.-.254 mm(.01 in.) O.S.  
  6N-8316 [1] BEARING 1.27 mm(.05 in.) U.S.-.254 mm(.01 in.) O.S.  
  5L-4195 [1] BEARING 1.27 mm(.05 in.) U.S.  
  6N-8318 [1] BEARING .254 mm(.01 in.) O.S.  
9. 7M-4926 [2] RETAINER  
10. 7N-9810 C [1] PIN  
  9S-8973 C [1] PISTON RING GROUP  
    (Includes a complete set of rings for one piston)
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14220026
 

CRANKSHAFT BEARING REPLACEMENT

CRANKSHAFT BEARING REPLACEMENT
SEBP14220026 SEBP1422
None CRANKSHAFT BEARING REPLACEMENT Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP14220027
 

3N-2684: DRIVE GP-FRONT ACCESSORY

3N2684 FRONT ACCESSORY DRIVE GROUP--S.A.E. Standard Engine Rotation--Part 1 of 2
c229410 SEBP1422
3N2684 DRIVE GP-FRONT ACCESSORY Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-2029 [4] BOLT  
2. 3B-4506 [30] LOCKWASHER  
3. 6L-2062 [1] HOUSING  
4. 4L-3748 [1] RETAINER ASSEM.  
    (Includes)
  5B-9318 [1] BALL  
  5L-2660 [1] BEARING  
  5H-6012 [1] SEAL  
5. 4L-3437 [5] GASKET  
6. 4L-3431 [1] COVER  
7. 4L-3375 [1] GASKET  
8. 1F-7603 [1] SCREW  
  5N-4687 C [1] GASKET 16 mm(.640 in.)I.D.  
9. 5N-4688 C [1] GASKET 13 mm(.520 in.)I.D.  
10. 3N-8584 [1] TUBE ASSEM.  
    (Includes)
  1F-7604 [1] FERRULE  
11. 8N-1365 C [1] GEAR (32 teeth)  
12. 1D-4574 [8] BOLT  
13. 3B-4508 [12] LOCKWASHER  
14. 8L-8570 [4] COVER  
15. 3B-1915 [8] BOLT (1.375 in.)long  
16. 0S-0509 [16] BOLT (.75 in.)long  
17. 5L-5840 [4] WASHER (seal)  
  5M-2894 [4] WASHER (steel)  
18. 1D-4572 [4] BOLT  
19. 0S-1588 [6] BOLT  
  1A-4784 [6] WASHER  
  C   INDICATES CHANGE
 

#SEBP14220028
 

3N-2684: DRIVE GP-FRONT ACCESSORY

3N2684 FRONT ACCESSORY DRIVE GROUP--S.A.E. Standard Engine Rotation--Part 2 of 2
c229411 SEBP1422
3N2684 DRIVE GP-FRONT ACCESSORY Parts scheme
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-7030 [6] BOLT  
  4L-3759 [3] LOCK  
2. 8N-1359 C [1] GEAR (25 teeth)  
3. 3N-8587 [1] TUBE ASSEM.  
4. 2N-9892 [1] PLATE  
5. 4N-4169 [2] STUD  
  2R-0504 [2] NUT  
6. 5N-4185 [2] WASHER  
7. 0S-1621 [5] BOLT  
8. 3H-7654 [10] WASHER  
9. 4L-3728 [1] SHAFT ASSEM.  
10. 0S-1587 [2] BOLT  
11. 4L-3392 [1] GASKET (to block)  
12. 0S-1585 [5] BOLT  
13. 3B-4508 [2] LOCKWASHER  
14. 5L-5665 [1] COVER  
15. 5B-2026 [1] PLUG  
  5B-5689 [1] GASKET  
16. 0S-1594 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
17. 5L-7291 [1] BLOCK  
  4L-3375 [1] GASKET  
18. 1B-2790 [4] BOLT  
19. 3B-4505 [4] LOCKWASHER  
20. 6L-2069 [1] GASKET (plate to housing)  
21. 4L-3407 [1] GEAR ASSEM. (71 teeth)  
    (Includes)
  5L-9143 [2] BEARING  
22. 6L-4783 [2] BOLT  
  9S-5282 [2] WASHER  
23. 4L-3413 [1] WASHER  
24. 6H-1717 [2] BOLT  
  4L-8767 [1] LOCK  
  C   INDICATES CHANGE
 

#SEBP14220029
 

3N-6883: ENGINE ADAPTER GROUP

3N6883 ENGINE ADAPTER GROUP--Manual Turn
SEBP14220029 SEBP1422
  For full view, you need register

Parts for your D398 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3N-3361 [1] HEXAGON  
  1B-8707 [1] KEY  
  3B-5412 [1] NUT  
  9S-1302 [1] WASHER  
  [1] COTTER  
  9L-1775 [4] BRACKET  
  4D-5451 [1] LUG  
  3N-3359 [1] COVER  
  0L-1351 [5] BOLT  
  1D-4717 [5] NUT  
  3B-4506 [5] LOCKWASHER  
  3N-3360 [1] DOOR  
  4B-5645 [1] SPRING  
  0S-1588 [1] BOLT  
  4B-4278 [2] WASHER  
  1B-2578 [2] NUT  
 

Information:

Engine News
During Installation Of Crankshaft Piston Ring Seals, Put Silicone Grease In The Groove And On The Seal
1979/04/25
Improved Ring Seal Used At Rear of Crankshaft
1980/01/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
New Crankshaft Wear Sleeve For Engines With Lip-Type Seals
1982/08/25
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
New Crankshaft Seal Groups Available
1984/09/12
Information For Reversing Crankshaft Rotation Of All 6.25" Bore V8, V12 And V16 Engines
1984/10/03
Correct Specifications For Crankshaft Deflection
1985/01/16
New Crankshaft Seals Used
1985/06/01
New Part Numbers Designate Crankshaft Use
1985/07/01
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Identification Of Crankshafts For Marine Society Approval
1986/06/01
Special Instruction
Using 6V9433 Crankshaft Removal Group{1000, 1202}
Using 6V9433 Crankshaft Removal Group{1000, 1202}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installing 3N8000 (Rear) And 3N8008 (Front) Crankshaft Seal Conversion Groups{1160, 1161}
Installing 3N8000 (Rear) And 3N8008 (Front) Crankshaft Seal Conversion Groups{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing The 3N3166 Crankshaft Seal And 2W1794 Wear Sleeve{1160, 1161}
Installing The 3N3166 Crankshaft Seal And 2W1794 Wear Sleeve{1160, 1161}
Special Handling Information And Installation Procedure For 4W2568, 4W2569, 4W2570 And 4W2571 Crankshaft Seal Conversion Groups And 4W2606 Or 4W2607 Crankshaft Seal Group{1160, 1161, 1202}
Special Handling Information And Installation Procedure For 4W2568, 4W2569, 4W2570 And 4W2571 Crankshaft Seal Conversion Groups And 4W2606 Or 4W2607 Crankshaft Seal Group{1160, 1161, 1202}
Field Replacement Of 5L2662 And 6L8201 Counterweights On Crankshafts For 6.25 Bore Vee Engines{1202}
Field Replacement Of 5L2662 And 6L8201 Counterweights On Crankshafts For 6.25 Bore Vee Engines{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
D399, G399, D398, G398, D379, G379 ENGINES
Crankshaft
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Bearing Surface (Journal) For Connecting Rods
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Bearing Surface (Journal) For Main Bearings
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Crankshaft Front Seal Ring And Thrower
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal (Lip Type) And Wear Sleeve
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal Ring And Thrower
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Crankshaft
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Service Magazine
Improved Ring Seal Used At Rear Of Crankshaft {1161}
1980/01/07
Some Nuts Used On Main Bearing Caps Are Smaller Than Standard Size Across The Flat Sides{1203}
1980/07/14
New Main Bearings And Connecting Rod Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/02/22
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Wear Sleeve For Engines With Lip-Type Seals{1160,1161}
1982/07/05
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Replacement Counterweights And Information For Replacement Of Counterweights And Balancing The Crankshaft{1202,0652}
1983/09/05
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Crankshaft Seal Groups Available{1202}
1984/09/03
Information For Reversing Crankshaft Rotation Of All 6.25" Bore V8, V12 And V16 Engines{1000}
1984/10/08
Correct Specifications For Cranskshaft Deflection {1202}
1985/01/14
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
New Crankshaft Seals Used{1160,1161,1202}
1985/06/03
New Part Numbers Designate Crankshaft Use{1202}
1985/06/24
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Identification Of Crankshafts For Marine Society Approval{1202}
1986/05/12
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
During Installation Of Crankshaft Piston Ring Seals, Put Silicone Grease In The Groove And On The Seal{1160,1161}
1979/04/09
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog D398 :

CYLINDER BLOCK & COVERS GP
3N-2678 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
3N-2678 CYLINDER BLOCK & COVERS GP
MECHANISM GP-CYL HEAD & VALVE
3N-2681 MECHANISM GP-CYL HEAD & VALVE
MECHANISM GP-CYL HEAD & VALVE
3N-2681 MECHANISM GP-CYL HEAD & VALVE
CYLINDER HEAD GP
5N-8320 CYLINDER HEAD GP
MANIFOLD GP-WATER SHIELDED
3N-1711 MANIFOLD GP-WATER SHIELDED
VALVE GP-TURBO LUBRICATION
8L-3421 VALVE GP-TURBO LUBRICATION
TURBOCHARGER GP
1P-1251 TURBOCHARGER GP
3N-6890 DAMPER GP
CAMSHAFT GP
4L-1131 CAMSHAFT GP
5N-5123 SHAFT GP-STUB
3N-6886 FLYWHEEL HOUSING GROUP
PISTON & ROD GP
6L-2868 PISTON & ROD GP
CRANKSHAFT BEARING REPLACEMENT
CRANKSHAFT BEARING REPLACEMENT
DRIVE GP-FRONT ACCESSORY
3N-2684 DRIVE GP-FRONT ACCESSORY
DRIVE GP-FRONT ACCESSORY
3N-2684 DRIVE GP-FRONT ACCESSORY

Truck sale:

 
95,000 
Caterpillar D398, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Caterpillar D398, Construction
95,000 
Caterpillar D398, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
CAT D398
USD $18,000 
CAT D398

Contractor Sales
Pocatello, Idaho
 
$95,000 USD 
CATERPILLAR D398 1978
- INDUSTRIAL
LOUISIANA CAT POWER SYSTEMS
5415 E. Broad St. - Lake Charles - Lou
CATERPILLAR D398 1972
$30,000 USD 
CATERPILLAR D398 1972
- STATIONARY GENERATOR SETS
HOLT OF CALIFORNIA - POWER SYSTEMS
- - United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.