9J3810 BULLDOZER ARRANGEMENT-STRAIGHT-EUROPEAN MARKET 7S BULLDOZER SERIAL NO.49K1800-UP. PART OF 8A8252 BULLDOZER ARRANGEMENT LISTED ON PAGE 275A D7G

Part No	Qty	Parts name


6J-5376 Y	[1]	BLADE GROUP

6J-9256 Y	[1]	TRUNNION GROUP

9J-2275 Y	[1]	HYDRAULIC LINES GROUP

9J-3809 Y	[1]	PUSH ARM GROUP

8M-3494	[1]	PLATE--SERIAL NUMBER ON BACK OF MOLD
		BOARD NEAR TOP AT R.H. END

4B-4158	[2]	DRIVE SCREW
Y		SEPARATE ILLUSTRATION

#SEBP14250401

9J-3813: BULLDOZER AR-UNIVERSAL

BULLDOZER AR-UNIVERSAL

9J3813 BASIC BULLDOZER ARRANGEMENT-UNIVERSAL
7U BULLDOZER SERIAL NO.61K1200-UP. ALSO PART OF 1U881 BULLDOZER
ARRANGEMENT LISTED ON PAGE 276

SEBP14250401 SEBP1425

For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name


6J-9160 Y	[1]	BLADE GROUP

6J-9256 Y	[1]	TRUNNION GROUP

9J-2275 Y	[1]	HYDRAULIC LINES GROUP

9J-3809 Y	[1]	PUSH ARM GROUP

	[1]	PLATE--SERIAL NUMBER ON BACK OF MOLD
		BOARD NEAR TOP AT R.H. END

4B-4158	[2]	DRIVE SCREW
Y		SEPARATE ILLUSTRATION

#SEBP14250402

1U-0881: BULLDOZER AR-UNIVERSAL

BULLDOZER AR-UNIVERSAL

1U0881 BULLDOZER ARRANGEMENT-UNIVERSAL
FOR USE WITH 173B HYDRAULIC CONTROL. AN ATTACHMENT

SEBP14250402 SEBP1425

For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name


9J-3813 Y	[1]	BULLDOZER ARRANGEMENT

9S-6659 Y	[1]	CYLINDER & VALVE GROUP--R.H

9S-6660 Y	[1]	CYLINDER & VALVE GROUP--L.H

9S-6658 Y	[1]	BULLDOZER HOSE & LINES GROUP

3G-7970 Y	[1]	CYLINDER MOUNTING GROUP

7G-4627 Y	[1]	RADIATOR GUARD ASSEMBLY
Y		SEPARATE ILLUSTRATION

#SEBP14250403

6J-9256: TRUNNION GP

TRUNNION GP

6J9256 TRUNNION GP
PART OF 7J4952,9J3810,1U0880 & 9J3813 BULLDOZER ARRANGEMENTS

c131907 SEBP1425

For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-5257	[12]	BOLT
	3B-4516	[12]	LOCKWASHER
2.	6J-9258	[2]	TRUNNION ASSEM.
3.	5J-4321	[2]	TRUNNION
			(1 in each 6J9258 Assem.)

#SEBP14250404

2J-8605: BLADE GP

BLADE GP

2J8605 BLADE GROUP-ANGLING
PART OF 7J4952 BULLDOZER ARRANGEMENT LISTED ON PAGE 274

c158119 SEBP1425

For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-6571	[1]	BLADE ASSEM.
2.	3J-6570	[4]	SUPPORT
3.	2J-5575	[1]	PLATE ASSEM. (R.H.)
4.	2J-5579	[1]	SHOE
5.	2J-5571	[1]	PLATE (upper-R.H.)
	2J-5572	[1]	PLATE (upper-L.H.)
6.	2J-5979	[1]	PLATE (lower-R.H.)
	2J-5980	[1]	PLATE (lower-L.H.)
7.	4F-1121	[1]	BRACKET
8.	2J-5576	[1]	PLATE ASSEM. (L.H.)
9.	2J-5580	[1]	SHOE
10.	5J-9627 C	[1]	END BIT (R.H.)
	5J-9628	[1]	END BIT (L.H.)
11.	5J-2409	[14]	BOLT
	2J-3505	[14]	NUT
12.	3J-6575	[4]	BEARING
13.	1A-8063	[16]	BOLT
	3B-4512	[16]	LOCKWASHER
14.	5J-4771	[21]	BOLT
	2J-3506	[21]	NUT
15.	5J-6888 C	[3]	CUTTING EDGE
16.	4F-0255	[1]	PIN
		[1]	COTTER PIN
17.	3F-6149	[1]	PIN
	C		INDICATES CHANGE

#SEBP14250405

2J-8605: BLADE GP

BLADE GP

2J8605 BLADE GROUP-ANGLING
PART OF 7J4952 BULLDOZER ARRANGEMENT LISTED ON PAGE 274B

c117475 SEBP1425

For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4F-1121	[1]	BRACKET (PART OF BLADE ASSEM.)
4F-0255	[1]	PIN
3B-4626	[1]	COTTER
3F-6149	[1]	PIN
5J-6888	[3]	CUTTING EDGE (STANDARD)
		- OR -
5J-6849	[3]	CUTTING EDGE (HEAVY DUTY)
3J-6571	[1]	BLADE ASSEM
8M-3494	[1]	PLATE (SERIAL NO)
4B-4159	[2]	SCREW (NOT SHOWN)
3J-6570	[4]	SUPPORT (PART OF BLADE ASSEM.)
1A-8063	[16]	BOLT
3B-4512	[16]	LOCKWASHER
3J-6575	[4]	BEARING
2J-5571	[1]	PLATE WEAR (UPPER RH)
2J-5572	[1]	PLATE WEAR (UPPER LH)
2J-5979	[1]	PLATE WEAR (LOWER RH)
2J-5980	[1]	PLATE WEAR (LOWER LH) (PARTS OF BLADE ASSEM.)
2J-5575	[1]	PLATE ASSEM. (RH) (PART OF BLADE ASSEM.)
2J-5579	[1]	SHOE (RH) (PART OF ASSEM 2J5575)
2J-5576	[1]	PLATE ASSEM. (LH) (PART OF BLADE ASSEM.)
2J-5580	[1]	SHOE (LH) (PART OF ASSEM 2J5576)
5J-2409	[14]	BOLT
2J-3505	[14]	NUT
5J-6927	[1]	END BIT (RH)
5J-6928	[1]	END BIT (LH) (STANDARD)
		-OR-
2J-2571	[1]	END BIT (RH)
2J-2572	[1]	END BIT (LH) (HEAVY DUTY)
5J-4771	[21]	BOLT
2J-3506	[21]	NUT

#SEBP14250406

6J-5376: BLADE GP

BLADE GP

6J5376 BLADE GROUP
PART OF 9J3810 & 1U0880 BULLDOZER ARRANGEMENTS

c178790 SEBP1425

For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6J-5340	[2]	CUTTING EDGE (Standard)
2.	7J-2846 H	[1]	CUTTING EDGE GROUP
			(Includes)
	7J-2847	[2]	CUTTING EDGE
3.	7J-9481	[1]	CUTTING EDGE (Center)
			(Heavy Duty)
4.	4J-3699 H	[1]	PUSH PLATE GROUP
5.	2B-7561	[8]	CORK
6.	3B-8488	[2]	FITTING
7.	7J-2363	[1]	CUTTING EDGE (Center Standard)
8.	6F-0196	[31]	BOLT
	2J-3505	[31]	NUT
	9H-1031	[31]	WASHER
9.	6J-9164 H	[1]	HITCH BRACKET GROUP
			(Consists of 2 Brackets)
10.	6J-6229	[2]	PIN
11.	1A-0458	[4]	BOLT
	3B-4512	[4]	LOCKWASHER
12.	6J-5342	[2]	RETAINER
13.	5J-5643	[2]	CONNECTOR
14.	5J-6927	[1]	END BIT (R.H.-Standard Flat)
	5J-6928	[1]	END BIT (L.H.-Standard Flat)
			- OR -
	4J-8843 H	[1]	END BIT (R.H.)
			(Heavy Duty-Thickened Corners)
	4J-8844 H	[1]	END BIT (L.H.)
			(Heavy Duty-Thickened Corners)
15.	6J-5375 C	[1]	BLADE ASSEM.
			(Includes)
	3J-2454	[1]	RETAINER
	7J-0858	[1]	MOLDBOARD ASSEM.
			(Includes)
16.	6J-5335	[1]	PLATE ASSEM. (R.H.)
			(Includes)
17.	6J-5313	[1]	SHOE ASSEM.
18.	5J-6351	[1]	BIT (Router)
19.		[1]	BIT (Router)
20.	6J-5336	[1]	PLATE ASSEM. (L.H.)
			(Includes)
21.	6J-5314	[1]	SHOE ASSEM.
22.	5J-6351	[1]	BIT (Router)
23.	5J-6352	[1]	BIT (Router)
24.	6J-5387	[1]	BRACKET ASSEM. (R.H.)
25.	6J-5388	[1]	BRACKET ASSEM. (L.H.)
			(Each Includes)
26.	3J-2452	[1]	CAP
27.	5J-6010	[2]	PLATE
28.	6J-5310	[2]	BRACKET
29.	9J-5962	[2]	TRUNNION ASSEM.
			(Each Includes)
30.	7J-5131	[1]	TRUNNION
31.	3G-8274	[1]	BRACKET ASSEM.
32.	9J-6058	[2]	DEFLECTOR
33.	7J-8776	[2]	REINFORCEMENT
	8M-3494 HJ	[1]	PLATE (Serial Number)
	4B-4159 HJ	[4]	SCREW
	C		INDICATES CHANGE
	J		NOT SHOWN
	H		NOT PART OF 6J5376 BLADE GROUP

#SEBP14250407

6J-5376: BLADE GP

BLADE GP

6J5376 BLADE GROUP
PART OF 9J3810 BULLDOZER ARRANGEMENT LISTED ON PAGE 275

c174940 SEBP1425

For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6J-5387	[1]	BRACKET ASSEM. (R.H.)
2.	6J-5388	[1]	BRACKET ASSEM. (L.H.)
			(Each Includes)
3.	3J-2452	[1]	CAP
4.	7J-8776	[2]	REINFORCEMENT
5.	9J-6058 C	[2]	DEFLECTOR
6.	3J-3142 H	[3]	WEAR PLATE
7.	2B-7561	[8]	CORK
8.	3B-8488	[2]	FITTING
9.	5J-9627	[1]	END BIT (R.H.)
			2.22 cm(.875 in.)thick
	5J-9628	[1]	END BIT (L.H.)
			2.22 cm(.875 in.)thick
10.	6J-5340	[2]	CUTTING EDGE (end)
			1.91 cm(.75 in.)thick
11.	7J-2363	[1]	CUTTING EDGE (center)
			1.91 cm(.75 in.)thick
			- OR -
12.	7J-2846	[1]	CUTTING EDGE GROUP
			(Includes)
	7J-2847	[1]	CUTTING EDGE (center)
			2.5 cm(.984 in.)thick
13.	7J-9481	[1]	CUTTING EDGE (end)
			2.5 cm(.984 in.)thick
14.	5J-4772 C	[31]	BOLT
	2J-3505	[31]	NUT
15.	9J-5962 C	[2]	TRUNNION ASSEM.
			(Includes)
16.	7J-5131	[1]	TRUNNION
17.	3G-8274 C	[1]	BRACKET ASSEM.
18.	1A-0458	[4]	BOLT
19.	3B-4512	[4]	LOCKWASHER
20.	6J-5342	[2]	RETAINER
21.	6J-5310	[2]	BRACKET
22.	5J-5643	[2]	CONNECTOR
23.	6J-6229	[2]	PIN
24.	5J-6010	[2]	PLATE
25.	3J-2454	[1]	RETAINER
26.	7J-0858	[1]	MOLDBOARD ASSEM.
			(Includes)
27.	6J-5335	[1]	PLATE ASSEM. (R.H.)
			(Includes)
28.	6J-5313	[1]	SHOE ASSEM.
29.	5J-6351	[1]	BIT (router)
30.	5J-6352	[1]	BIT (router)
31.	6J-5336	[1]	PLATE ASSEM. (L.H.)
			(Includes)
		[1]	SHOE ASSEM.
32.	5J-6351	[1]	BIT (router)
33.	5J-6352	[1]	BIT (router)
	C		INDICATES CHANGE
	H		NOT PART OF 6J5376 BLADE GROUP

#SEBP14250408

6J-9160: BLADE GP

BLADE GP

9J9160 BLADE GROUP
PART OF 9J3813 BULLDOZER ARRANGEMENT LISTED ON PAGE 276

c174941 SEBP1425

For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-2454	[1]	RETAINER
2.	3B-8488	[2]	FITTING
3.	2B-7561	[8]	CORK
4.	6J-5388	[1]	BRACKET ASSEM. (L.H.)
	6J-5387	[1]	BRACKET ASSEM. (R.H.)
			(Each Includes)
5.	3J-2452	[1]	CAP
6.	7J-8765	[2]	DEFLECTOR ASSEM.
7.	6J-9158	[1]	MOLDBOARD ASSEM.
			(Includes)
8.	5J-6352	[2]	END BIT (upper)
9.	5J-6352	[2]	END BIT (lower)
10.	6J-9153	[1]	SHOE ASSEM. (R.H.)
	6J-9154	[1]	SHOE ASSEM. (L.H.)
11.	9J-0965	[2]	SUPPORT
12.	6J-9142	[1]	SUPPORT (center)
13.	5J-9627	[1]	END BIT (R.H.)
			2.22 cm(.875 in.)thick
	5J-9628	[1]	END BIT (L.H.)
			2.22 cm(.875 in.)thick
14.	3J-3142 H	[4]	WEAR PLATE
15.	1A-0458	[4]	BOLT
	3B-4512	[4]	LOCKWASHER
16.	6J-5342	[2]	RETAINER
17.	6J-5310	[2]	BRACKET
18.	5J-5643	[2]	CONNECTOR
19.	6J-5229	[2]	PIN
20.	9J-5962 C	[2]	TRUNNION ASSEM.
			(Each Includes)
21.	7J-5131	[1]	TRUNNION
22.	6J-9044	[2]	CUTTING EDGE (end)
			1.91 cm(.75 in.)thick
23.	7J-2362	[1]	CUTTING EDGE (center)
			1.91 cm(.75 in.)thick
24.	5J-4772 C	[33]	BOLT
	2J-3505	[33]	NUT
25.	3G-8274 C	[1]	BRACKET ASSEM.
	C		INDICATES CHANGE
	H		NOT PART OF 6J9160 BLADE GROUP

#SEBP14250409

REPLACEMENT CUTTING EDGES AND END BITS

REPLACEMENT CUTTING EDGES AND END BITS
7U BULLDOZER SERIAL NO. 61K1200-UP

SEBP14250409 SEBP1425

For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name


7J-2849		CUTTING EDGE GROUP--HEAVY DUTY


4T-3420	[2]	CUTTING EDGE--END--25MM(.984")THICK
4T-3421	[1]	CUTTING EDGE--CENTER--25MM(.984")THICK

6J-5471		END BIT GROUP--HEAVY DUTY-HOT CUPPED


3G-8315	[1]	END BIT--R.H.
3G-8316	[1]	END BIT--L.H.

9J-1883		END BIT GROUP--FORGED


4J-8843	[1]	END BIT--R.H.
4J-8844	[1]	END BIT--L.H.