AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

REPLACEMENT CUTTING EDGES AND END BITS 7S BULLDOZER SERIAL NO.60K8000-UP AND 49K1800-UP D7G TRACK-TYPE TRACTOR


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
IMPLEMENTS
BULLDOZER GP
HYDRAULIC SYSTEM
CYLINDER GP
IMPLEMENTS
PUSH ARM GP
FRAME GP
BULLDOZER GP

TRACK-TYPE TRACTOR D7G TRACK-TYPE TRACTOR 92V
 D7G TRACTOR / POWER SHIFT / 92V11898-UP (MACHINE) POWERED BY 3306 ENGINE SEBP1425 D7G 92V   (1975)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
REPLACEMENT CUTTING EDGES AND END BITS
REPLACEMENT CUTTING EDGES AND END BITS
REPLACEMENT CUTTING EDGES AND END BITS
TOOTH GP-RIPPER
9J-1641 TOOTH GP-RIPPER
TOOTH GP-RIPPER
9J-1641 TOOTH GP-RIPPER
 

#SEBP14250410
 

REPLACEMENT CUTTING EDGES AND END BITS

REPLACEMENT CUTTING EDGES AND END BITS
7S BULLDOZER SERIAL NO.60K8000-UP AND 49K1800-UP
SEBP14250410 SEBP1425
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  7J-2846 CUTTING EDGE GROUP--HEAVY DUTY  
   
   
  4T-2992 [2] CUTTING EDGE--END--25MM(.984")THICK  
  4T-2993 [1] CUTTING EDGE--CENTER--25MM(.984")THICK  
   
  6J-5471 END BIT GROUP--HEAVY DUTY--HOT CUPPED  
   
   
  3G-8315 [1] END BIT--R.H.  
  3G-8316 [1] END BIT--L.H.  
   
  9J-1883 END BIT GROUP--FORGED  
   
   
  4J-8843 [1] END BIT--R.H.  
  4J-8844 [1] END BIT--L.H.  
 

#SEBP14250411
 

REPLACEMENT CUTTING EDGES AND END BITS

REPLACEMENT CUTTING EDGES AND END BITS
7A BULLDOZER SERIAL NO. 72F17800-UP AND 30F1500-UP
SEBP14250411 SEBP1425
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  5J-6849 CUTTING EDGE--3 REQUIRED  
    41.82" LONG, 1.00" THICK
   
  6J-5471 END BIT GROUP--HEAVY DUTY--HOT CUPPED  
   
   
  3G-8315 [1] END BIT--R.H.  
  3G-8316 [1] END BIT--L.H.  
   
  9J-1883 END BIT GROUP--FORGED  
   
   
  4J-8843 [1] END BIT--R.H.  
  4J-8844 [1] END BIT--L.H.  
 

#SEBP14250412
 

9J-3809: PUSH ARM GP

9J3809 PUSH ARM GP
9J8748-PAGE 285
8J3964 & 7J8684-PAGE 284
PART OF 9J3810, 1U0880 & 9J3813 BULLDOZER ARRANGMENTS
AN ATTACHMENT
c344673 SEBP1425
9J3809 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-8684 Y [1] PUSH ARM GP  
2. 3F-4956 B [14] SHIM  
3. 3F-4971 [8] PIN  
  3B-5326 [8] COTTER  
4. 6J-5378 [1] STRUT AS-LH  
5. 9J-3787 [1] BEARING AS  
6. 5B-5489 [1] PIN  
  3B-5314 [1] COTTER  
  2A-3198 C [2] WASHER  
7. 1J-8265 [2] SCREW-ADJUSTING  
8. 0S-1627 [4] BOLT  
  6J-5348 [1] RETAINER  
9. 3B-4512 C [8] LOCKWASHER  
10. 6J-5383 [1] BEARING  
11. 6J-5377 [1] STRUT AS-RH  
  9J-3787 [1] BEARING AS  
12. 3B-8489 [1] FITTING-GREASE  
13. 6J-5365 [1] BRACE AS-TILTING  
  6J-5362 [1] SPACER  
14. 4J-2000 [1] BALLSTUD  
15. 3J-2452 [1] CAP-BALLJOINT  
16. 8J-4866 [1] LUG  
17. 6F-3908 [1] HANDLE  
18. 3F-4854 [1] KNOB  
19. 0S-1756 [8] BOLT  
20. 6J-6229 [2] PIN  
21. 6J-5372 C [2] RETAINER  
22. 1A-0458 C [4] BOLT  
23. 2B-7408 [2] PLUG-PIPE  
24. 6J-5349 [1] SCREW-ADJUSTING  
25. 9J-8748 Y [1] CYLINDER GP-TILT  
26. 8J-3964 Y [1] ARM GP-PUSH-RH  
27. 6J-5370 [1] CAGE-BEARING  
28. 6J-5359 [2] BRACE AS-DIAGONAL  
    (EACH INCLUDE)
  8J-4832 [1] NUT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14250413
 

9J-3809: PUSH ARM GP

9J3809 PUSH ARM GROUP
PART OF 9J3810 BULLDOZER ARRANGEMENT LISTED ON PAGE 275B
7J8684,8J3964 PUSH ARM AND 9J8748 CYLINDER PARTS ARE SHOWN ON
PAGES 284 & 285
c174942 SEBP1425
9J3809 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-8684 Y [1] PUSH ARM GROUP (L.H.)  
    (Separate Illustration)
2. 3F-4956 [14] SHIM  
    (use as required)
3. 3F-4971 [8] PIN  
  3B-5326 [8] COTTER PIN  
4. 6J-5378 [1] STRUT ASSEM. (L.H.)  
5. 9J-3787 [1] BEARING ASSEM.  
6. 5B-5489 C [1] PIN  
  3B-5314 C [1] COTTER PIN  
  2A-3198 C [1] WASHER  
7. 1J-8265 [2] SCREW  
8. 0S-1627 [4] BOLT  
  6J-5348 [1] RETAINER  
9. 3B-4512 [12] LOCKWASHER  
10. 6J-5383 [1] BEARING  
11. 6J-5377 [1] STRUT ASSEM. (R.H.)  
  9J-3789 [1] BEARING  
12. 3B-8489 [1] FITTING  
13. 6J-5365 [1] BRACE ASSEM.  
  6J-5362 [1] SPACER  
14. 4J-2000 [1] BALL STUD  
15. 3J-2452 [1] CAP  
16. 8J-4866 [1] LUG  
17. 6F-3908 [1] HANDLE ASSEM.  
  4J-5560 [1] BAR  
18. 3F-4854 [1] KNOB  
19. 0S-1756 [8] BOLT  
20. 6J-6229 [2] PIN  
21. 6J-5372 [4] RETAINER  
22. 1A-0458 [8] BOLT  
23. 2B-7408 [2] PLUG  
24. 6J-5349 [2] SCREW  
25. 9J-8748 CY [1] CYLINDER GROUP  
26. 8J-3964 Y [1] PUSH ARM GROUP (R.H.)  
    (Separate Illustration)
27. 6J-5370 [1] CAGE  
28. 6J-5359 [2] BRACE ASSEM.  
29. 6J-5354 [1] BEARING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14250414
 

8J-3964: PUSH ARM GP-RH

8J3964 PUSH ARM GROUP-R.H.
PART OF 9J3809 PUSH ARM GROUP SHOWN ON PAGES 283 & 283B
c205522 SEBP1425
8J3964 PUSH ARM GP-RH Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-6775 [2] BOLT  
  6F-7522 [2] NUT  
  4K-0684 [2] WASHER  
2. 7J-1393 [1] CAP ASSEM.  
  6F-7523 [1] CAP  
3. 7B-3235 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
4. 7J-1368 [1] COVER  
5. 8J-3963 [1] ARM ASSEM.  
6. 1J-0774 [1] BRACKET  
7. 6J-7485 [1] BRACKET  
8. 5J-5648 [1] PLATE  
9. 4J-1616 [1] BRACKET  
10. 5J-5646 [1] PLATE  
11. 7J-1185 [1] BEARING ASSEM.  
12. 0T-0690 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
13. 9J-9546 C [1] PLATE  
  C   INDICATES CHANGE
 

#SEBP14250415
 

7J-8684: PUSH ARM GP-LH

7J8684 PUSH ARM GROUP-L.H.
PART OF 9J3809 PUSH ARM GROUP SHOWN ON PAGES 283 AND 283B
c131900 SEBP1425
7J8684 PUSH ARM GP-LH Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-6775 [2] BOLT  
  6F-7522 [2] NUT  
  4K-0684 [2] WASHER  
2. 6F-7523 [1] CAP  
3. 6J-7850 [1] ARM ASSEM.  
4. 1J-0774 [1] BRACKET  
5. 5J-5648 [1] PLATE  
6. 6J-7486 [1] BRACKET  
7. 4J-1616 [1] BRACKET  
8. 5J-5646 [1] PLATE  
9. 1J-6740 [1] BEARING  
    (Parts of 6J7850 Assem.)
 

#SEBP14250416
 

9J-8748: CYLINDER GP-TILT

9J8748 TILT CYLINDER GROUP-(CHG.1) 165 MM(6.5") BORE X 152 MM(6")
STROKE. PART OF 9J3809 PUSH ARM GROUP SHOWN ON PAGES 283 & 283B
c353985 SEBP1425
9J8748 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-8749 R [1] CYLINDER AS  
2. 1J-2087 [1] BUSHING  
3. 6J-9748 [1] PISTON  
4. 3J-9703 [1] RING-WEAR  
5. 5J-4991 [1] SEAL AS  
6. 6J-9747 [1] WASHER  
7. 6J-9751 R [1] ROD AS  
8. 3J-2452 [1] CAP-BALLJOINT  
9. 6J-9749 [1] BALLSTUD  
10. 1J-4143 [1] NUT  
11. 2K-4472 [1] SEAL-O-RING  
12. 2K-4473 [1] RING-BACK-UP  
13. 6J-6915 C [1] SEAL-RING  
14. 5J-8300 C [1] SEAL-U-CUP  
15. 2J-1411 [1] SEAL-LIP TYPE  
16. 1D-4637 [4] BOLT  
  5P-8250 C [4] WASHER  
17. 3G-9912 C [1] HEAD  
18. 2J-0564 [1] NUT-SELF LOCKING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14250417
 

4J-0787: PUSH ARM & BRACE GP

4J0787 ARM AND BRACE GROUP
PART OF 7J4952 BULLDOZER ARRANGEMENT LISTED ON PAGES 274 & 274B
c212425 SEBP1425
4J0787 PUSH ARM & BRACE GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-6502 [2] PIN  
2. 0S-1585 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  3J-3668 [2] PIN  
3. 3J-6559 [6] CAP  
  3J-6572 [72] SHIM  
4. 3J-6560 [2] SCREW  
5. 3B-2968 [24] BOLT  
  3B-4512 [24] LOCKWASHER  
6. 3B-8489 [4] FITTING  
7. 3J-6558 [2] BRACE ASSEM.  
    (Each Includes)
8. 6F-3908 [1] HANDLE  
9. 3F-4854 [1] KNOW  
10. 8J-4866 C [1] LUG  
11. 6J-1345 [2] ARM ASSEM.  
    (Each Includes)
12. 3J-6574 [1] TRUNNION  
13. 6J-1342 [1] NUT  
14. 3J-6578 [2] PLATE  
15. 3J-6576 [1] BEARING  
16. 3J-6573 [2] SCREW  
17. 3J-6577 [2] PIN  
18. 4F-1252 [2] PIN  
  3J-1770 [2] PIN (lock)  
19. 3J-6561 [2] SCREW  
  C   INDICATES CHANGE
 

#SEBP14250418
 

7J-4951: FRAME GP

7J4951 C-FRAME GROUP
PART OF 7J4952 BULLDOZER ARRANGEMENT LISTED ON PAGES 274 AND 274B
c131895 SEBP1425
7J4951 FRAME GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-2682 [6] BRACKET  
2. 7J-5129 [2] BRACKET ASSEM.  
3. 7J-5131 [2] TRUNNION  
    (1 in each 7J5129 Assem.)
4. 1J-6751 [1] COLLAR  
5. 3J-1943 [2] COLLAR  
6. 2J-5595 [1] TUBE  
7. 2J-5596 [1] PIN  
8. 6F-7523 [2] CAP  
9. 1J-6775 [4] BOLT  
  6F-7522 [4] NUT  
  4K-0684 [4] WASHER  
10. 7J-7488 [2] BEARING  
 

#SEBP14250419
 

3J-2835: CUP GP-PUSH

3J2835 PUSH CUP GROUP
7A BULLDOZER SERIAL NO.72F17800-UP AND 30F1500-UP
AN ATTACHMENT
c132290 SEBP1425
3J2835 CUP GP-PUSH Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-2832 [1] PIN  
2. 4F-0255 [1] PIN  
  3B-4626 [1] COTTER PIN  
 

Information:

Special Instruction
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Caterpillar Parts SIS Catalog D7G :

REPLACEMENT CUTTING EDGES AND END BITS
BLADE GP
6J-9160 BLADE GP
BLADE GP
6J-5376 BLADE GP
BLADE GP
6J-5376 BLADE GP
BLADE GP
2J-8605 BLADE GP
BLADE GP
2J-8605 BLADE GP
TRUNNION GP
6J-9256 TRUNNION GP
1U-0881 BULLDOZER AR-UNIVERSAL
REPLACEMENT CUTTING EDGES AND END BITS
PUSH ARM GP
9J-3809 PUSH ARM GP
PUSH ARM GP
9J-3809 PUSH ARM GP
PUSH ARM GP-RH
8J-3964 PUSH ARM GP-RH
PUSH ARM GP-LH
7J-8684 PUSH ARM GP-LH
CYLINDER GP-TILT
9J-8748 CYLINDER GP-TILT
PUSH ARM & BRACE GP
4J-0787 PUSH ARM & BRACE GP
FRAME GP
7J-4951 FRAME GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.