AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2J8605 BLADE GROUP-ANGLING PART OF 7J4952 BULLDOZER ARRANGEMENT LISTED ON PAGE 272B D7G TRACK-TYPE TRACTOR


WORK TOOLS
BLADE GP
IMPLEMENTS
BULLDOZER GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
IMPLEMENTS
FRAME GP
PUSH ARM GP

TRACK-TYPE TRACTOR D7G TRACK-TYPE TRACTOR 91V
 D7G TRACTOR / DIRECT DRIVE / 91V01917-UP (MACHINE) POWERED BY 3306 ENGINE SEBP1426 D7G 91V   (1975)

WORK TOOLS

BLADE GP
BLADE GP
2J-8605 BLADE GP
BLADE GP
2J-8605 BLADE GP
BLADE GP
6J-5376 BLADE GP
BLADE GP
6J-5376 BLADE GP
BLADE GP
6J-9160 BLADE GP
 

#SEBP14260420
 

2J-8605: BLADE GP

2J8605 BLADE GROUP-ANGLING
PART OF 7J4952 BULLDOZER ARRANGEMENT LISTED ON PAGE 272B
c117475 SEBP1426
2J8605 BLADE GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4F-1121 [1] BRACKET (PART OF BLADE ASSEM.)  
  4F-0255 [1] PIN  
  3B-4626 [1] COTTER  
  3F-6149 [1] PIN  
  5J-6888 [3] CUTTING EDGE (STANDARD)  
    - OR -
  5J-6849 [3] CUTTING EDGE (HEAVY DUTY)  
  3J-6571 [1] BLADE ASSEM  
  8M-3494 [1] PLATE (SERIAL NO)  
  4B-4159 [2] SCREW (NOT SHOWN)  
  3J-6570 [4] SUPPORT (PART OF BLADE ASSEM.)  
  1A-8063 [16] BOLT  
  3B-4512 [16] LOCKWASHER  
  3J-6575 [4] BEARING  
  2J-5571 [1] PLATE WEAR (UPPER RH)  
  2J-5572 [1] PLATE WEAR (UPPER LH)  
  2J-5979 [1] PLATE WEAR (LOWER RH)  
  2J-5980 [1] PLATE WEAR (LOWER LH) (PARTS OF BLADE ASSEM.)  
  2J-5575 [1] PLATE ASSEM. (RH) (PART OF BLADE ASSEM.)  
  2J-5579 [1] SHOE (RH) (PART OF ASSEM 2J5575)  
  2J-5576 [1] PLATE ASSEM. (LH) (PART OF BLADE ASSEM.)  
  2J-5580 [1] SHOE (LH) (PART OF ASSEM 2J5576)  
  5J-2409 [14] BOLT  
  2J-3505 [14] NUT  
  5J-6927 [1] END BIT (RH)  
  5J-6928 [1] END BIT (LH) (STANDARD)  
    -OR-
  2J-2571 [1] END BIT (RH)  
  2J-2572 [1] END BIT (LH) (HEAVY DUTY)  
  5J-4771 [21] BOLT  
  2J-3506 [21] NUT  
 

#SEBP14260421
 

6J-5376: BLADE GP

6J5376 BLADE GP
PART OF 9J3810 & 1U0880 BULLDOZER ARRANGEMENTS
c178790 SEBP1426
6J5376 BLADE GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-5340 [2] CUTTING EDGE (Standard)  
2. 7J-2846 H [1] CUTTING EDGE GROUP  
    (Includes)
  7J-2847 [2] CUTTING EDGE  
3. 7J-9481 [1] CUTTING EDGE (Center)  
    (Heavy Duty)
4. 4J-3699 H [1] PUSH PLATE GROUP  
5. 2B-7561 [8] CORK  
6. 3B-8488 [2] FITTING  
7. 7J-2363 [1] CUTTING EDGE (Center Standard)  
8. 6F-0196 [31] BOLT  
  2J-3505 [31] NUT  
  9H-1031 [31] WASHER  
9. 6J-9164 H [1] HITCH BRACKET GROUP  
    (Consists of 2 Brackets)
10. 6J-6229 [2] PIN  
11. 1A-0458 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
12. 6J-5342 [2] RETAINER  
13. 5J-5643 [2] CONNECTOR  
14. 5J-6927 [1] END BIT (R.H.-Standard Flat)  
  5J-6928 [1] END BIT (L.H.-Standard Flat)  
    - OR -
  4J-8843 H [1] END BIT (R.H.)  
    (Heavy Duty-Thickened Corners)
  4J-8844 H [1] END BIT (L.H.)  
    (Heavy Duty-Thickened Corners)
15. 6J-5375 C [1] BLADE ASSEM.  
    (Includes)
  3J-2454 [1] RETAINER  
  7J-0858 [1] MOLDBOARD ASSEM.  
    (Includes)
16. 6J-5335 [1] PLATE ASSEM. (R.H.)  
    (Includes)
17. 6J-5313 [1] SHOE ASSEM.  
18. 5J-6351 [1] BIT (Router)  
19. [1] BIT (Router)  
20. 6J-5336 [1] PLATE ASSEM. (L.H.)  
    (Includes)
21. 6J-5314 [1] SHOE ASSEM.  
22. 5J-6351 [1] BIT (Router)  
23. 5J-6352 [1] BIT (Router)  
24. 6J-5387 [1] BRACKET ASSEM. (R.H.)  
25. 6J-5388 [1] BRACKET ASSEM. (L.H.)  
    (Each Includes)
26. 3J-2452 [1] CAP  
27. 5J-6010 [2] PLATE  
28. 6J-5310 [2] BRACKET  
29. 9J-5962 [2] TRUNNION ASSEM.  
    (Each Includes)
30. 7J-5131 [1] TRUNNION  
31. 3G-8274 [1] BRACKET ASSEM.  
32. 9J-6058 [2] DEFLECTOR  
33. 7J-8776 [2] REINFORCEMENT  
  8M-3494 HJ [1] PLATE (Serial Number)  
  4B-4159 HJ [4] SCREW  
  C   INDICATES CHANGE
  J   NOT SHOWN
  H   NOT PART OF 6J5376 BLADE GROUP
 

#SEBP14260422
 

6J-5376: BLADE GP

6J5376 BLADE GROUP
PART OF 9J3810 BULLDOZER ARRANGEMENT LISTED ON PAGE 273
c174940 SEBP1426
6J5376 BLADE GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-5387 [1] BRACKET ASSEM. (R.H.)  
2. 6J-5388 [1] BRACKET ASSEM. (L.H.)  
    (Each Includes)
3. 3J-2452 [1] CAP  
4. 7J-8776 [2] REINFORCEMENT  
5. 9J-6058 C [2] DEFLECTOR  
6. 3J-3142 H [3] WEAR PLATE  
7. 2B-7561 [8] CORK  
8. 3B-8488 [2] FITTING  
9. 5J-9627 [1] END BIT (R.H.)  
    2.22 cm(.875 in.)thick
  5J-9628 [1] END BIT (L.H.)  
    2.22 cm(.875 in.)thick
10. 6J-5340 [2] CUTTING EDGE (end)  
    1.91 cm(.75 in.)thick
11. 7J-2363 [1] CUTTING EDGE (center)  
    1.91 cm(.75 in.)thick
    - OR -
12. 7J-2846 [1] CUTTING EDGE GROUP  
    (Includes)
  7J-2847 [1] CUTTING EDGE (center)  
    2.5 cm(.984 in.)thick
13. 7J-9481 [1] CUTTING EDGE (end)  
    2.5 cm(.984 in.)thick
14. 5J-4772 C [31] BOLT  
  2J-3505 [31] NUT  
15. 9J-5962 C [2] TRUNNION ASSEM.  
    (Includes)
16. 7J-5131 [1] TRUNNION  
17. 3G-8274 C [1] BRACKET ASSEM.  
18. 1A-0458 [4] BOLT  
19. 3B-4512 [4] LOCKWASHER  
20. 6J-5342 [2] RETAINER  
21. 6J-5310 [2] BRACKET  
22. 5J-5643 [2] CONNECTOR  
23. 6J-6229 [2] PIN  
24. 5J-6010 [2] PLATE  
25. 3J-2454 [1] RETAINER  
26. 7J-0858 [1] MOLDBOARD ASSEM.  
    (Includes)
27. 6J-5335 [1] PLATE ASSEM. (R.H.)  
    (Includes)
28. 6J-5313 [1] SHOE ASSEM.  
29. 5J-6351 [1] BIT (router)  
30. 5J-6352 [1] BIT (router)  
31. 6J-5336 [1] PLATE ASSEM. (L.H.)  
    (Includes)
  [1] SHOE ASSEM.  
32. 5J-6351 [1] BIT (router)  
33. 5J-6352 [1] BIT (router)  
  C   INDICATES CHANGE
  H   NOT PART OF 6J5376 BLADE GROUP
 

#SEBP14260423
 

6J-9160: BLADE GP

6J9160 BLADE GROUP
PART OF 9J3813 BULLDOZER ARRANGEMENT LISTED ON PAGE 274
c174941 SEBP1426
6J9160 BLADE GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-2454 [1] RETAINER  
2. 3B-8488 [2] FITTING  
3. 2B-7561 [8] CORK  
4. 6J-5388 [1] BRACKET ASSEM. (L.H.)  
  6J-5387 [1] BRACKET ASSEM. (R.H.)  
    (Each Includes)
5. 3J-2452 [1] CAP  
6. 7J-8765 [2] DEFLECTOR ASSEM.  
7. 6J-9158 [1] MOLDBOARD ASSEM.  
    (Includes)
8. 5J-6352 [2] END BIT (upper)  
9. 5J-6352 [2] END BIT (lower)  
10. 6J-9153 [1] SHOE ASSEM. (R.H.)  
  6J-9154 [1] SHOE ASSEM. (L.H.)  
11. 9J-0965 [2] SUPPORT  
12. 6J-9142 [1] SUPPORT (center)  
13. 5J-9627 [1] END BIT (R.H.)  
    2.22 cm(.875 in.)thick
  5J-9628 [1] END BIT (L.H.)  
    2.22 cm(.875 in.)thick
14. 3J-3142 H [4] WEAR PLATE  
15. 1A-0458 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
16. 6J-5342 [2] RETAINER  
17. 6J-5310 [2] BRACKET  
18. 5J-5643 [2] CONNECTOR  
19. 6J-5229 [2] PIN  
20. 9J-5962 C [2] TRUNNION ASSEM.  
    (Each Includes)
21. 7J-5131 [1] TRUNNION  
22. 6J-9044 [2] CUTTING EDGE (end)  
    1.91 cm(.75 in.)thick
23. 7J-2362 [1] CUTTING EDGE (center)  
    1.91 cm(.75 in.)thick
24. 5J-4772 C [33] BOLT  
  2J-3505 [33] NUT  
25. 3G-8274 C [1] BRACKET ASSEM.  
  C   INDICATES CHANGE
  H   NOT PART OF 6J9160 BLADE GROUP
 

#SEBP14260424
 

6J-9256: TRUNNION GP

6J9256 TRUNNION GP
PART OF 7J4952, 9J3810, 1U0880 & 9J3813 BULLDOZER ARRANGEMENTS
c131907 SEBP1426
6J9256 TRUNNION GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-5257 [12] BOLT  
  3B-4516 [12] LOCKWASHER  
2. 6J-9258 [2] TRUNNION ASSEM.  
3. 5J-4321 [2] TRUNNION  
    (1 in each 6J9258 Assem.)
 

#SEBP14260425
 

REPLACEMENT CUTTING EDGES & END BITS

REPLACEMENT CUTTING EDGES & END BITS
7A BULLDOZER SERIAL NO. 72F17800-UP & 30F1500-UP
SEBP14260425 SEBP1426
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  5J-6849 CUTTING EDGE-3 REQUIRED  
    41.82" LONG, 1.00" THICK
   
  6J-5471 END BIT GROUP-HEAVY DUTY-HOT CUPPED  
   
  3G-8315 [1] END BIT-R.H.  
  3G-8316 [1] END BIT-L.H.  
   
  9J-1883 END BIT GROUP-FORGED  
   
  4J-8843 [1] END BIT-R.H.  
  4J-8844 [1] END BIT-L.H.  
 

#SEBP14260426
 

REPLACEMENT CUTTING EDGES & END BITS

REPLACEMENT CUTTING EDGES & END BITS
7U BULLDOZER SERIAL NO. 61K1200-UP
SEBP14260426 SEBP1426
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  7J-2849 CUTTING EDGE GROUP-HEAVY DUTY  
   
  4T-3420 [2] CUTTING EDGE-END-25 MM (.984") THICK  
  4T-3421 [1] CUTTING EDGE-CENTER-25 MM (.984") THICK  
   
  6J-5471 END BIT GROUP-HEAVY DUTY-HOT CUPPED  
   
  3G-8315 [1] END BIT-R.H.  
  3G-8316 [1] END BIT-L.H.  
   
  9J-1883 END BIT GROUP-FORGED  
   
  4J-8843 [1] END BIT-R.H.  
  4J-8844 [1] END BIT-L.H.  
 

#SEBP14260427
 

REPLACEMENT CUTTING EDGES & END BITS

REPLACEMENT CUTTING EDGES & END BITS
7S BULLDOZER SERIAL NO. 60K8000-UP & 49K1800-UP
SEBP14260427 SEBP1426
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  7J-2846 CUTTING EDGE GROUP-HEAVY DUTY  
   
  4T-2992 [2] CUTTING EDGE-END-(.984") 25MM THICK  
  4T-2993 [1] CUTTING EDGE-CENTER-(.984") 25MM THICK  
   
  6J-5471 END BIT GROUP-HEAVY DUTY-HOT CUPPED  
   
  3G-8315 [1] END BIT-R.H.  
  3G-8316 [1] END BIT-L.H.  
   
  9J-1883 END BIT GROUP-FORGED  
   
  4J-8843 [1] END BIT-R.H.  
  4J-8844 [1] END BIT-L.H.  
 

#SEBP14260428
 

7J-4951: FRAME GP

7J4951 C-FRAME GROUP
PART OF 7J4952 BULLDOZER ARRANGEMENT LISTED ON PAGES 272 & 272B
c131895 SEBP1426
7J4951 FRAME GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-2682 [6] BRACKET  
2. 7J-5129 [2] BRACKET ASSEM.  
3. 7J-5131 [2] TRUNNION  
    (1 in each 7J5129 Assem.)
4. 1J-6751 [1] COLLAR  
5. 3J-1943 [2] COLLAR  
6. 2J-5595 [1] TUBE  
7. 2J-5596 [1] PIN  
8. 6F-7523 [2] CAP  
9. 1J-6775 [4] BOLT  
  6F-7522 [4] NUT  
  4K-0684 [4] WASHER  
10. 7J-7488 [2] BEARING  
 

#SEBP14260429
 

4J-0787: PUSH ARM & BRACE GP

4J0787 ARM & BRACE GROUP
PART OF 7J4952 BULLDOZER ARRANGEMENT LISTED ON PAGES 272 & 272B
c212425 SEBP1426
4J0787 PUSH ARM & BRACE GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-6502 [2] PIN  
2. 0S-1585 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  3J-3668 [2] PIN  
3. 3J-6559 [6] CAP  
  3J-6572 [72] SHIM  
4. 3J-6560 [2] SCREW  
5. 3B-2968 [24] BOLT  
  3B-4512 [24] LOCKWASHER  
6. 3B-8489 [4] FITTING  
7. 3J-6558 [2] BRACE ASSEM.  
    (Each Includes)
8. 6F-3908 [1] HANDLE  
9. 3F-4854 [1] KNOW  
10. 8J-4866 C [1] LUG  
11. 6J-1345 [2] ARM ASSEM.  
    (Each Includes)
12. 3J-6574 [1] TRUNNION  
13. 6J-1342 [1] NUT  
14. 3J-6578 [2] PLATE  
15. 3J-6576 [1] BEARING  
16. 3J-6573 [2] SCREW  
17. 3J-6577 [2] PIN  
18. 4F-1252 [2] PIN  
  3J-1770 [2] PIN (lock)  
19. 3J-6561 [2] SCREW  
  C   INDICATES CHANGE
 

Information:

Caterpillar Parts SIS Catalog D7G :

BLADE GP
2J-8605 BLADE GP
1U-0881 BULLDOZER AR-UNIVERSAL
9J-3813 BULLDOZER AR-UNIVERSAL
9J-3810 BULLDOZER AR-STRAIGHT
1U-0880 BULLDOZER AR-STRAIGHT
8A-8252 BULLDOZER AR-STRAIGHT
1U-0880 BULLDOZER AR-STRAIGHT
1U-0880 BULLDOZER AR-STRAIGHT
BLADE GP
6J-5376 BLADE GP
BLADE GP
6J-5376 BLADE GP
BLADE GP
6J-9160 BLADE GP
TRUNNION GP
6J-9256 TRUNNION GP
REPLACEMENT CUTTING EDGES & END BITS
REPLACEMENT CUTTING EDGES & END BITS
REPLACEMENT CUTTING EDGES & END BITS
FRAME GP
7J-4951 FRAME GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.